9. An empty, massless cubo is monsured to have all sides equal to 11 cm. It is Ponting in water and will slowly be filled with sand
that has a density of 3.5 g/cm! What volume of sand will cause the box to sink?

Answer:

As altitude increases, the amount of gas molecules in the air decreases—the air becomes less dense than air nearer to sea level. This is what meteorologists and mountaineers mean by "thin air." Thin air exerts less pressure than air at a lower altitude

Answer:

Warm moist air, hope this helps

Answer:

A heat source high enough to boil the water and the water itself

Explanation:

Answer:

infrasound

Explanation:

Answer:

The energy efficiency represents the things you can do with some amount of energy, and if you can do more with less, than it reduces the energy consumption.

Explanation:

The answer to this question is actually very simple. Imagine that you use only the half of the energy you produce, an efficiency of 50%. Lets say you need 5kJ, so you would need to produce 10kJ, because you can consume only the half. Now, imagine you increase the efficiency, you use exactly what you can generate, (efficiency of 100%). In this case, if you needed only 5kJ you would need to generate only 5kJ.

Explanation:

Physics, or the study of matter, energy, and the interactions between them, helps us to understand the laws and rules that govern the physical world.

Answer:

22 kgs

Explanation:

440.925 pounds if thats what you mean but kgs is the weight system for everyone but america

Answer:

Wave amplitude of a transverse wave is the difference of height between a crest and the resting position. Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is currently compressed by the wave.

Answer:

A wave caused by a disturbance with more energy has greater amplitude

Explanation:

Answer:26.7 and 7.4

Explanation:

So, first you add all the time up then the area travelled.

Firstly; 45 mins + 300 minutes(5 hours) + 165 minutes(2.75 minutes)= 510 minutes

Secondly; 42.2KM + 180.5KM + 3.86KM= 226.56KM

Finally: For hourly you would do: 510 divided by 60 to get 510 mins in terms of hours: so, 8.5 hours then you would do 226.56KM divided by 8.5 hours to get: 26.7Km/hr

For m/s: 7.4m/s

Answer:

D

Explanation:

because when the temperature increases things tend to rise and explode instead of decreasing

Answer:

Answer: just realized this is more advanced physics so if this doesn't seem right I apologize, I had a really bad physics teacher lol. So ignore this for now!

Hey there! I think this might just be basic color mixing! The color would be a turquoise

Explanation: R G B make up our visible light spectrum. This has documented graphs. Through basic use of one, you can determine that the color would be a blue-green, commonly referred to as turquoise! There are many more color combinations then just this one as well!

Answer:

Because some of the energy escaped or was used.

Explanation:

Answer:

Reflection involves a change in direction of waves when they bounce off a barrier. Refraction of waves involves a change in the direction of waves as they pass from one medium to another.

Explanation:

Answer:

The weight of an object is dependent upon the value of the acceleration of gravity.

Answer:

c because

Explanation:

Plants and trees couldn't thrive without capillary action. Capillary action helps bring water up into the roots. With the help of adhesion and cohesion, water can work it's way all the way up to the branches and leaves.

Answer:

option C

Explanation:

So option C is correct

The decay constant for radium-226 is larger than the decay constant for carbon-14 due to its obtained value.

The reduction in the number of radionuclides per unit time is the rate of decay.

The decay constant of the radium-226 is;

[tex]\lambda_1=\frac{ 16}{100}\times 266 \\\\ \lambda_1= -36.16[/tex]

The decay constant of the carbon-14 is;

[tex]\lambda_2=\frac{ -57.3}{100}\times 14 \\\\ \lambda_1= -802.2[/tex]

Hence, the decay constant for radium-226 is larger than the decay constant for carbon-14.

To learn more about the rate of decay refer to the link;

https://brainly.com/question/14486631

#SPJ1

Answer:

  0.693/1600 > 0.693/5730

Explanation:

The decay constant is the reciprocal of the time it takes for the radioactivity to decline to about 36.8% of its original value. It is the value of k in the multiplier e^(-kt), which tells the fraction remaining after time t.

When compared to the half-life, h, the value of k is ...

  k = 0.693/h . . . . . decay constant for half-life h

Effectively, the decay constant is proportional to the inverse of the half-life. The constant of proportionality is ln(2) ≈ 0.693.

__

decay constant for radium-226:

  0.693/1600 ≈ 4.33×10^-4

decay constant for carbon-14:

  0.693/5730 ≈ 1.21×10^-4

Since 4.33×10^-4 is greater than 1.21×10^-4, the decay constant of radium-226 is larger than that of carbon-14.

_____

Additional comment

Taking the reciprocal of a positive number reverses the ordering:

  1600 < 5730

  1/1600 > 1/5730

The half-life of radium-226 is less than that of carbon-14, so its decay constant will be larger.

Answer:

True

Explanation:

Gas always live in free state but some gas is not . We can said that mostly gas volume can be changeable during disturbing by environment situation.

Answer:

8 meters

Explanation:

Frequency of waves =  5 waves / 4 s = 1.25 Hz

speed = frequency * wavelength

speed/ frequency = wavelength

  10 / 1.25 = 8 m

Answer:

KE = F * S     initial kinetic energy will expended in stopping object

1/2 M V^2 = F * S

S = 1/2 * 50 * 35^2 / 800 = 38.3 m      stopping distance

If you need to know the stopping time involved -

(V2 - V1) = a t     where the change in velocity is 35 m/s

a = F / M = 800 / 50 = 16 m/s^2      deceleration of mass

t = 35 / 16 = 2.2 sec

AnswerAnswerAnswerAnswerAnswer:0.3571m

Explanation:

Answer:

9kg.

Explanation:

Data obtained from the question include:

F (force) = 45N

a (acceleration) = 5 m/s2

m (mass) =?

Force is simply the product of mass and acceleration as given by the formula: F = ma. With this formula (i.e F = ma) we can easily calculate the mass of the object. This is illustrated below:

F = ma

m = F/a

m = 45/5

m = 9kg.

Therefore, the mass of the object is 9kg

Heating and cooling are the kind of energy.  The most important energy when considering the heating and cooling of a building is thermal energy. The correct option is A.

Energy is the ability to do work.

The temperature of building is increased or decreased due to the season changes. This heating or cooling is a  type of energy related to thermal.

Thus, the most important energy when considering the heating and cooling of a building is thermal energy.  The correct option is A.

Learn more about energy.

https://brainly.com/question/1932868

#SPJ1

Answer:

The answer would be "This ancient form of pain relief and stimulation is said to benefit patients by blocking channels which practitioners claim

Explanation:

Answer:

It provides only a placebo effect.

Explanation:

Edge

Answer:

For a photocopier to work, a field of positive charges must be generated on the surface of both the drum and the copy paper. These tasks are accomplished by the corona wires. These wires are subjected to a high voltage, which they subsequently transfer to the drum and paper in the form of static electricity.

Answer:

A child holds the bar of a set of weights without moving I think