A moving object's speed and direction vary over time at a certain rate, which is known as acceleration. The term "acceleration" refers to the change in speed of a point or object along a straight line. Due to the constant change in direction, motion on a circle accelerates even while the speed is constant.
Velocity is measured by a specific unit of time and from a specific point of view, and it describes the rate at which an object's orientation changes while it is moving.
The term "Distance Traveled" describes how far an object has travelled during a specified amount of time to get to its destination. Or The path that a body takes to travel a specific distance at a certain speed from one location to another is known as the distance travelled.
Using,
Avg. acceleration (a) = (final velocity - initial velocity(v_i)) / time (t)
time = 6500 / 389 = 16.71 sec
Now, the following equation can be used to determine distance from acceleration: D = v*t + 1/2*a*t². where an is the acceleration, t is the passage of time, and v is the velocity.
D = distance travelled = 54309 m
To know more about circumstances of the rocket, click on the link below:
https://brainly.com/question/8892118
#SPJ9
a baseball player hits a baseball into the air with an initial vertical velocity of 65 feet per second. the player hits the ball from a height of 3 feet. write an equation that gives the baseball's height as a function of the time (in seconds) after it is hit. h(t)
In 1–2 sentences, explain how you would determine the constant k for a spring.
PLS help! ASAP
To determine the force constant (k) of a spring, we need to perform an experiment which requires a retort stand and clamp, a spiral spring, a meter rule and different weights.
Force constant of the spring or the spring constant can be defined as the stiffness of the spring.
Also it is the defined as the force require to cause displacement.The setup is arranged as shown in the image attached as Fg.1.
The natural length of the spring is first recorded. Different weights are added to the spring one after the other and the extension is recorded, each time when the different weights are added simultaneously
The weight is now plotted on the vertical axis and the extension is plotted on the horizontal axis. The slope of the graph is the force constant of the spring.
The graph is shown in the image attached as Fig.2
To know more about force constant,
https://brainly.com/question/24919116
#SPJ1
The spring constant, k, in Hooke's Law has units of Newton per meter since it is a constant for the force applied per unit of length. The spring constant measures how strong and stiff the spring is. Hope this answers the question. Have a nice day.
A merry-go-round moves in a circle at a constant speed. Is the merry-go-round accelerating? Explain your an.
Since an object moving in a circular motion will experience a change in velocity, a merry-go-round moving in a circle will be accelerating
What is Constant Speed ?Constant speed is also known as uniform speed. The speed of an object is uniform when the distance travel by the object per time taken is steady or constant.
If a merry-go-round moves in a circle at a constant speed, the merry-go-round will be accelerating because the speed may be constant but the velocity is not.
An object moving in a circular motion will experience a constant speed and also change in velocity.
The acceleration experienced by an object moving in a circle is known as centripetal acceleration.
Therefore, a merry-go-round moving in a circle at a constant speed will be accelerating toward to the center.
Learn more about Centripetal Acceleration here: https://brainly.com/question/79801
#SPJ1
According to the Big Bang theory
a. dark matter is changing to ordinary matter throughout the universe.
b. dark energy is pulling the universe into black holes.
c. the universe will someday end because of a "big bang."
d. the universe began with an enormous explosion.
Answer:
D. the universe began with an enormous explosion.
Explanation:
This theory states that the universe began as a single hot, dense, and small point. It then exploded, expanded, became less dense, and the temperature became cooler.
Hope this helps! :)
Write a journal entry for a person living in the world where the Greenhouse effect was never combated. What is this person dealing with? Include information on the temperature, environment, and sea levels.
Without the natural greenhouse effect, heat from the Earth's surface would simply escape into space, resulting in an average temperature of about 20 °C.
What happens without the greenhouse effect?Earth would be a frozen wasteland without greenhouse gases. By retaining some of the Earth's heat energy so that it doesn't all escape into space, greenhouse gases keep our planet habitable. The greenhouse effect is a label for this heat-trapping phenomenon. The climate control in your greenhouse needs to be improved because it can help with disease prevention, plant growth stimulation, quality improvement, and even energy savings. The preservation of our planet's habitable temperature depends on "greenhouse gases."
To know more about greenhouse :
https://brainly.com/question/13706708
#SPJ10
charge q is a test charge used to measure the electrical potential created by source charge q when the test charge is brought in from very far awa and placed a distance of r from the source charge the charges have an eelctric potential energy
The value of Q so that electric potential at point P becomes zero is -√2q.
What is the test chargeA test charge is a charge that is so little that the region it is positioned in is hardly impacted by it. It is possible to gauge the strength and direction of an electric field using a positive test charge, which is a unit positive charge.
What is the value of Q so that electric potential at point P becomes zero?The value of Q is -√2q.
To know more about Electrical Potential visit:
https://brainly.com/question/12645463
#SPJ9
6) A spring with a spring constant k = 800 N/m has been compressed, and 196 J of
potential energy is stored. What distance from equilibrium has the spring been
compressed?
Answer:
[tex]0.7\; {\rm m}[/tex].
Explanation:
If spring with spring constant [tex]k[/tex] is compressed by [tex]x[/tex] relative to the equilibrium, the elastic potential energy [tex]E[/tex] stored in that spring will be [tex]E = (1/2)\, k\, x^{2}[/tex].
For the spring in this question, it is given that [tex]E = 196\; {\rm J}[/tex] whereas [tex]k = 800\; {\rm N \cdot m^{-1}}[/tex]. The displacement [tex]x[/tex] needs to be found.
Note that [tex]\begin{aligned}E &= 196\; {\rm J} = 196\; {\rm N \cdot m} \end{aligned}[/tex] (one joule is the work done when a force of [tex]1\; {\rm N}[/tex] is applied over a distance of [tex]1\; {\rm m}[/tex].)
Rearrange the equation [tex]E = (1/2)\, k\, x^{2}[/tex] to find displacement [tex]x[/tex] in terms of potential energy [tex]E[/tex] and spring constant [tex]k[/tex]:
[tex]\begin{aligned} x^{2} = \frac{2\, E}{k}\end{aligned}[/tex].
[tex]\begin{aligned} x &= \sqrt{\frac{2\, E}{k}} \\ &= \sqrt{\frac{2 \times 196\; {\rm N \cdot m}}{800\; {\rm N\cdot m^{-1}}}} \\ &= \sqrt{0.49\; {\rm m^{2}}} \\ &= 0.7\; {\rm m} \end{aligned}[/tex].
In other words, the spring has been compressed by [tex]x = 0.7\; {\rm m}[/tex] from the equilibrium.
two oppositely charged but otherwise identical conducting plates of area 2.50 square centimeters are separated by a dielectric 1.80 millimeters thick, with a dielectric constant of k
A material's relative static permittivity (or static relative permittivity) under specific conditions is a measure of how well it focuses electrostatic lines of flux. It is the ratio of electrical energy stored when a potential is applied to the permittivity of a vacuum. The relative static permittivity equals the relative permittivity calculated at zero frequency. The dielectric constant, relative dielectric constant, and static dielectric constant are other synonyms for relative static permittivity. While these phrases are still widely used, they are unclear and have been rejected by certain standards groups. There are two reasons for the potential uncertainty. depending on the context, relative permittivity
To learn more about dielectric constants the given link:
brainly.com/question/15020008
#SPJ9
Which diagram shows the resulting wave when they cross at point X?
The diagram shows the resulting wave when they cross at point X is the second one (b) because It is the triangle that is pointed upward on the rope's top side and appears to be a little larger than the others.
What is the wave about?A wave is a disturbance that can go through a material without permanently moving the material's components. Transverse and longitudinal are known to be the two types.
In a transverse wave, the wave's direction of propagation is parallel to the direction in which the medium's particle vibrations are occurring. Examples include X-rays, light waves, as well as water waves. In contrast, in longitudinal waves, the direction of the particle vibration is said to be parallel to the path of the wave transmission.
Note that it is type of longitudinal wave is a wave in a rope where there is the motion of two wave pulses.
Learn more about resulting wave from
https://brainly.com/question/1336894
#SPJ1
A car is traveling at a constant velocity of 60 km/h east for 4 hours.
Choose the correct statement about the acceleration of the car.
A
The acceleration of this car IS positive.
B
The acceleration of this car is negative.
C
The acceleration of this car is zero.
D
m
The acceleration of this car is 15 Co
The acceleration of this car is zero. Because Acceleration is the change of velocity with respect to time and since car maintains a constant velocity, there is no acceleration.
What is acceleration ?The rate at which a velocity changes over time in both direction and speed. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting.
What is the relationship between acceleration and speed?Acceleration is the rate at which speed changes, while speed is the ratio of the distance in a time period. The metric process utilizes meters per second (m/s) as the unit of speed and meters per second squared (m/s²) as the measure of acceleration. Velocity is a scalar quantity, whereas speed is indeed a scalar quantity.
To know more about Acceleration visit:
https://brainly.com/question/2303856
#SPJ13
What is the Gravitational pull of something that weighs 254.4 Newtons and is at a 40 Degree angle?
An object weighing 254.4 N and inclined at a 40° angle has a gravitational pull of 2380.5.
The formula of a Force is F=Mg.
Where M is the mass of an object, and g is the gravity.
[tex]F_{1}[/tex]=254.4× 10, Value of gravity ≈ 10.
= 2544
Here F ≠ Mg, due to an angle of 40°.
∴ [tex]F_{ax}= mass. cos \alpha[/tex] .
= 254.4× cos 40
As cos40 =0.766
= 254.4 × 0.766
= 194.88
To find a Normal force, use the formula of Gravitational pull.
[tex]F_{total} = F_{1}-F_{bx}[/tex] , here [tex]F_{bx} = M. sin\alpha[/tex] =163.5
= 2544-163.5
=2380.5
Hence Gravitational pull is 2380.5
To know about The Gravitation pull, refer to the link.
https://brainly.com/question/13467280
#SPJ1
You will get brainlist!
Ms. Garcia's science students are studying scale models. For her science project, Sarah has decided to make a scale model of the solar system. She is using the model you see here as inspiration. She plans to use this as her starting point and add the remaining planets in the correct orbits around the Sun. What advise would you give Sarah before she begins her solar system model?
A.) This model does not show the correct scale for the sun
B.) In order to make an accurate scale model, Sarah should use a much larger Sun before adding the planets in the correct order.
C.) The model does not illustrate that the Sun is the center of the solar system.
D.) The model's scale for the size of the objects and the distance between the Sun and Earth are incorrect.
THIS MODEL DOES NOT SHOW THE CORRECT SCALE FOR THE SUN
reducing the separation of two bodies to one-fourth its original value will cause the gravitational force between them to become times . (select two choices.)
Reducing the separation of two bodies to one-fourth its original value will cause the gravitational force between them to become stronger times 16.
What will happen if the distance between two bodies grows? Will the gravitational force between them change?The gravitational force between two particles decreases to half its initial value as their distance from one another is twice.What happens to gravity when the mass is cut in half?The gravitational pull between two objects changes inversely with their squared distance and directly with their masses. Therefore, the gravitational force between the two items would decrease to one-fourth of its initial strength when the masses of both objects are halved without affecting their distance.What transpires when two masses are in contact with one another? Suppose one mass is reduced?The force between two items weakens the further apart they are from one another. The force between the objects grows as mass 1 increases. The force between the objects reduces as Mass 2 decreases.To learn more about gravitational force visit:
https://brainly.com/question/12528243
#SPJ9
If Rico pulls on a 30 kg box of supplies with a force of 200 N towards the nearest firefight and Ace pulls on the box with a force of -56 N in the opposite direction, what is the net force (in Newtons) on the box of supplies?
Answer:
144 Newtons towards the nearest firefighter
Explanation:
The net force is 200 - 56 = 144N
What is a similar Mid-Ocean Ridge on dry land compared to?
Answer:
Mid-ocean ridges around the globe are linked by plate tectonic boundaries and the trace of the ridges across the ocean floor appears similar to the seam of a baseball.
Explanation:
if you set out to explore the surface of the moon, you would wear a thermally insulated space suit. in such activity, you might expect to generate roughly 4 kj of heat per kilogram of mass per hour. if all this heat were retained by your body, how much would your body temperature increase per hour owing to this rate of heat production? (assume that your heat capacity is roughly that of water) what time limit would you recommend for a moon walk under these conditions?
Temperature rise hourly = 0.956 degree Celsius
2.3245 hours are the time limit for the process.
How would you define specific heat?The amount of heat needed to raise a substance's temperature by one degree Celsius in one gram is known as specific heat. Calories or joules per gram per degree Celsius are frequently used as the units of specific heat. For instance, water has a specific heat of 1 calorie (4.186 joules) per gram per degree Celsius.
Heat produced per hour per 1kg = 4 KJ
Heat absorbed per kg per hour = temperature rise x specific heat of body
4 = temp rise x 4.184 KJ/kgK
temperature rise per hour = 4/4.184 = 0.956 C
For calculation of time limit
increase of C = ( increase in F) x 5/9
= 4 x 5/9 = 2.22
Now per hour rise = 0.956 C
time required to rise per 2.22 C = ( 2.22 /0.956)
= 2.3245 hours
Hence time limit = 2.3245 hours
To know more about specific heat visit:
https://brainly.com/question/11297584
#SPJ9
a parallel–plate capacitor of capacitance c and distance d between plates is fully charged from a battery of voltage v, and then disconnected. the plates of capacitor are slowly pulled to the half of the initial distance (d/2).
When plates of capacitor are slowly pulled to the half so, voltage of capacitor is now V/2.
What is the energy of a capacitor?The charge Q and voltage V between the capacitor plates are related to the energy U C U C stored in a capacitor because it is electrostatic potential energy. A charged capacitor stores energy in the electrical field that develops between its plates. The capacitor charges up, expanding the electrical field. Two parallel lines, either flat or curved, should be close but not touching in order for the capacitor symbol to accurately represent how the capacitor is constructed.
What is called capacitance?The capacity of a component or circuit to gather and hold energy in the form of an electrical charge is known as capacitance. Devices that store energy include capacitors, which come in a variety of sizes and shapes.
To know more about capacitance :
https://brainly.com/question/14746225
#SPJ9
if a wooden box and a steel box with identical shapes are holding under water, the wooden box tends to float when released but the steel box sinks. this is because the buoyant force experiences by the wooden box is larger than that experiences by the steel box.
The buoyant force is same for both boxes. Steel box sinks because its density is higher than water and the density of wood is lower than water.
An object that is fully or partially submerged in a fluid will experience an upward push called the buoyant force. Another name for this upward thrust is up thrust. An object's propensity to float in a fluid is known as buoyancy. Any object submerged in a liquid or gas experiences an upward force known as the buoyant force when there is gravity present.
When an object is submerged in a static fluid, pressure differences acting on its opposing sides provide buoyancy. water density is less. After reading this article, you will be able to describe the buoyant force and the rationale behind why fluids push submerged things higher. Let's discuss the definition of buoyancy and its various manifestations.
Learn more about buoyant force here
https://brainly.com/question/21990136
#SPJ4
kami is walking through the airport with her two-wheeled suitcase. the suitcase handle is tilted 42 ∘∘ from vertical, and kami pulls parallel to the handle with a force of 120 nn. (force is measured in newtons, abbreviated nn.)
Vertical part of The F Sign theater will be equal to F. Our result is 76.4 degrees. I apologize, 76.4 Newton. This completes the vertical element of the solution.
In this issue, a luggage handle is pushed while inclined 46 degrees from vertical. 110 Newtons of force, parallel to the handle, are applied. Additionally, we must determine the magnitudes of the horizontal and vertical components of the applied force. so make a vertical angle. 46 degree force is additional.
As a result, the angle with the horizontal will be equal to 44 3 degrees, or roughly 93 - 46 degrees. Therefore, the title to 40 40 is the angle with the positive x-axis of the force. Therefore, fx's horizontal component is F.
Cost information 110 Newton times 44 degrees of force. This results in F. X. about 79.1 Newtons. We must determine the vertical component in section B. Because of this, the vertical component F. I will equal the F Sign theater. Our result is 76.4 degrees. I apologize, 76.4 Newton. This completes the vertical element of the solution.
To know more about degrees click on the link:
https://brainly.com/question/364572
#SPJ4
Question 1 of 20:
Select the best answer for the question.
1. Unlike the IQ, your emotional intelligence (EQ)___
A. can be discovered through your academic grades.
B. may be improved over time by becoming more mindful.
C. can only be developed during childhood.
D. is a set value that never changes.
PLEASE HELP!!!!
Unlike the IQ, your emotional intelligence (EQ) may be improved over time by becoming more mindful
Emotional intelligence is the understanding and usage of one's own emotions in a positive way to relieve their stress. It also helps for effective communication, to overcome challenges, to empathize and to defuse any bad situation.
Option A is the correct for IQ ( Intelligence quotient ). Option C is wrong because EQ can be built in any stage of your life. EQ is basically emotions. So option D is incorrect.
Therefore, Unlike the IQ, your emotional intelligence (EQ) may be improved over time by becoming more mindful
To know more about emotional intelligence
https://brainly.com/question/13129837
#SPJ1
A fireman d = 48.0 m away from a burning building directs a stream of water from a ground-level fire hose at an angle of i = 24.0° above the horizontal as shown in the figure. If the speed of the stream as it leaves the hose is vi = 40.0 m/s, at what height will the stream of water strike the building?
The height at which the stream of water strike the building is 12.9 m.
What is the time of motion of the water?
The time of motion of the stream of water is calculated as follows;
X = Vₓt
where;
Vₓ is the horizontal speed of the stream of watert is the time of motion of the stream of waterX is the horizontal distance travelled by the stream of waterSubstitute the given parameters and solve for time of motion of the water,
t = X/Vₓ
t = (48 m) / (40 x cos24)
t = 1.31 seconds
The height reached by the stream of water is calculated as follows;
h = Vyt - ¹/₂gt²
where;
Vy is the initial vertical velocity of the stream of watert is the time of motiong is acceleration due to gravitySubstitute the given parameters and solve for the height reached by the stream of water
h = (40 x sin24)(1.31) - ¹/₂(9.8)(1.31)²
h = 12.9 m
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
Identical balls are dropped from the same initial height and bounce back to half the initial height. In case 1 the ball bounces off a cement floor and in case 2 the ball bounces off a piece of stretchy rubber.
The change in momentum of the ball will be biggest in Case 1.
The change in momentum of the ball will be highest in the case 1, where the ball bounce back to it's half the initial height after the collision with the cement floor.
When the ball hits the cement floor, the time of contact between ball and the floor is the very very less. This is why the force imparted by the cement floor on the ball will be very high.
The impulse I imparted on the ball by floor is.
I = ∆F/∆t
As the force is very high and the time of contact is very less. The impulse will be very high. And as we know from the impulse momentum theorem. The impulse is equal to the change in momentum.
So the change in momentum will be biggest in case 1.
To know more about change in momentum, visit,
https://brainly.com/question/1042017
#SPJ9
Complete question - Identical balls are dropped from the same initial height and bounce back to half the initial height. In case 1 the ball bounces off a cement floor and in case 2 the ball bounces off a piece of stretchy rubber. In which case is the change in momentum of the ball between the instant just before the ball collides with the floor or rubber and the instant just after the ball leaves the floor or rubber the biggest?
Case 1
Case 2
Same in both
an air-filled parallel-plate capacitor with capacitance c0 stores charge q on plates separated by distance d. the potential difference across the plates is δv0 and the energy stored is pec,0. if the capacitor is disconnected from its voltage source and the space between the plates is then filled with a dielectric of constant κ
The capacitance of parallel plate capacitor with air is given by
C0=\epsilon0A/d
The capacitance of a parallel plate capacitor with a dielectric of dielectric constant k is given by
Cnew=k\epsilon0A/d
Part A.
Cnew/C0=(k\epsilon0A/d)/(\epsilon0A/d)=k=2
So
Cnew/C0=2
Part B.
Since the capacitor is disconnected from the voltage source. So voltage will be constant
So
\DeltaVnew/\DeltaV0=1
Part C.
Energy stored in the capacitor is given by
PEC=(1/2)CV2
So
PEC,new/PEC,0=Cnew/C0=2
The capacitance of a conductor is defined as the ratio of the quantity of electric charge stored on it to the difference in electric potential. There are two types of capacitance that are commonly recognized: self-capacitance and mutual capacitance. 237–238 Any electrically charged object displays self-capacitance, for which the electric potential between the object and the ground is measured. Mutual capacitance is measured between two conductors and is especially significant in the operation of the capacitor, a device built specifically for this purpose as an elementary linear electronic component.
Capacitance is solely determined by the geometry of the capacitor's design, such as the opposing surface area of the plates and the distance between them, as well as the permittivity of the dielectric material between the plates.
To learn more about capacitance the given link:
brainly.com/question/14746225
#SPJ9
assuming that the night will remain clear, calm, and unsaturated, the predicted minimum temperature is 32°f. suddenly, the wind speed increases and remains gusty throughout the night. the minimum temperature will most likely be .
Assuming that the night will remain clear, calm, and unsaturated, the predicted minimum temperature is 32°f. suddenly, the wind speed increases and remains gusty throughout the night. The minimum temperature will most likely be higher than predicted due to mixing.
As wind speed increases, it moves the air molecules at a greater frequency due to collisions, and hence, the overall kinetic energy of the molecules increases making them move at a higher speed.
When the night is calm and clear then the surface of earth will be cooler than usual as the air molecules move at normal speed. However, when the wind speed increases, it draws warmer air from the surrounding which is mixed downward on the earth's surface preventing the temperature from dropping. Therefore, on a such night, the temperature will be slightly warmer than usual.
If you need to learn more about temperature click here:
https://brainly.com/question/26141817
#SPJ4
_____is a measure of amount of matter in a given amount of space
Answer: Density
Explanation:
I remember learning it in 9th-grade physic class.
Use the picture above to explain what is happening with the visible light in terms of: reflection, absorption, refraction and transmission. Use specific
details from the picture in your answer!
Since the picture is not provided, I have given how reflection, absorption, refraction and transmission of visible light works.
There are electrons present in the atoms and molecules of objects. A visible light wave will have certain frequency. If the frequency of the light wave matches with the frequency that causes the electron to vibrate, the electrons will absorb the energy of light for vibrational motion. During the vibrational motion, the vibrational energy is converted into thermal energy. This is how light is absorbed.
The waves that do not match the frequencies are reflected if the object is opaque and is transmitted if the object is transparent. If the object is has high refractive index, the light bends and comes out the other side, It is called as refraction.
To know more about refraction
https://brainly.com/question/2660868
#SPJ1
A chemical reaction takes place in which energy is released. Arrange the reaction’s characteristics in order from start to finish.
If energy is released in a chemical reaction, the order of reaction’s characteristics from start to finish are higher energy of reactants → transition state → lower energy of products
When two or more two molecules interact with each other and undergo certain chemical changes, a chemical reaction occurs. Chemical reaction results in changes in the chemical properties of the reactants.
There are two types of chemical reactions involving energy. If energy is absorbed during the reaction it is called as Endothermic reaction. If energy is released during the reaction it is called as Exothermic reaction.
Therefore, the order of reaction’s characteristics from start to finish are
Higher energy of reactants
↓
Transition state
↓
Lower energy of products
To know more about order of reaction’s characteristics
brainly.com/question/2463824
#SPJ1
differentiator utilizes an ideal op amp, a 30 kω resistor, and a 0.03 μf capacitor. what is the frequency 0f in hz at which its input and output sine‐wave signals have equal magnitude? what is the output signal for a 1 v peak‐to‐peak sine‐wave input with frequency equal to 10
The work calls for a 10k Omega resistance value and a 1 nF capacitance value. Being aware of those output gives us a clear advantage. To get the frequency of unity gain, we can utilize the transfer function (2.34)
The output waveform will consist of positive and negative spikes of size Vsat, which is roughly 13V for a 15V op-amp power source, for a square wave input, let's say 1V peak and 1 KHz.
The differentiated output will be zero whenever the input is held constant at 1V.
For a perfect square wave, the input slope is infinite when it transitions between the t 1V levels.
As a result, the output is clipped to around 13V for a 15V op-amp power source.
To know more about resistor click on the link:
https://brainly.com/question/22594038
#SPJ4
The question was incomplete. Check below the full question.
differentiator utilizes an ideal op amp, a 30 kω resistor, and a 0.03 μf capacitor. what is the frequency 0f in hz at which its input and output sine‐wave signals have equal magnitude? what is the output signal for a 1 v peak‐to‐peak sine‐wave input with frequency equal to 10f₀ ?
a rubber boot is at rest on an inclined plane. when the angle of inclination of the plane is increased to 35.8°, the boot begins to slide down the incline. then, when the angle is decreased to 30.2°, the speed of the boot is constant. what are the coefficients of static and kinetic friction between the boot and the incline? static kinetic
The boot and incline have 0.859 as their static and kinetic friction coefficients.
How to simplify the equations of kinetic and mechanical energy?We start for the first angle where the given angle is 36.5 ° and the acceleration is zero.
The force equations would be given by:
F = m g sin θ
N = m g cos θ
Fr = μs N
Where μ is coefficient of friction (static)
If we make a sum of forces in the direction in which the block moves we will have the sin θ Component and that of the friction force, so
∑ F = 0
F - Fr = 0
F = Fr
mg sin θ = μ N
m g sin θ = μ m g cos θ
solving for the coefficient, then
μ = sin θ / cos θ = tan θ
substitute the value in the above equation, we get
μ = tan (36.5)
μ = 0.740
We apply the same consideration for the angle of 30.5°, then we know that
μk = tan θ
substitute the value of θ, in the above equation, we get
μk = tan (30.5)
μk = 0.859
Therefore, the value coefficients of static and kinetic friction between the boot and the incline is 0.859.
To learn more about angle of inclination refer to:
https://brainly.com/question/2763627
#SPJ9
a rubber boot is at rest on an inclined plane. when the angle of inclination of the plane is increased to 35.8°, the boot begins to slide.
How do you calculate force on an incline?
Inclined plane formulas for a cubic block
Gravitational force: F g = m × g F_g = m \times g Fg=m×g, where m is the mass of object and g is the gravitational constant
When the force of incline is longer the mechanical advantage for an inclined plane is greater than 1, as less force is required to move an object up the slope than if it were lifted straight up. The mechanical advantage increases as the slope of the inclined plane becomes more gradual, requiring less input force.to learn more about force of incline reffer to:
https://brainly.com/question/6667591
#SPJ9
state whether the loudness of the wave is increasing or decreasing
All forms of waves have a definite amplitude, and this amplitude is what determines how loud a sound wave is. In contrast to good surfing waves, which may have an amplitude of 10 feet or more, a wave on a calm ocean will often have a height of less than one foot.
Decreasing.
Determination of a wave's amplitude:
The amplitude of a sound wave determines how loud or loud it is. A louder sound has a bigger amplitude, and a softer sound has a smaller amplitude.
Higher pitch and sharper edges result from decreasing wavelength and increasing frequency. As a result, increasing the frequency makes sounds sharper while increasing the amplitude or intensity increases the volume.
A sound wave's amplitude measures the height of the wave. When a sound is made, the maximum displacement of the medium's vibrating particles from their mean position determines the amplitude of the sound wave.
To know more about loudness of the wave, click on the link below:
https://brainly.com/question/1199084
#SPJ9