The correct answer is The logic behind the Secant method is to iteratively update two initial guesses, x0 and x1, based on the function evaluations at those points. The formula x2 = x1 - (f(x1) * (x1 - x0)) / (f(x1) - f(x0)) is used to update the guesses and obtain a new approximation, x2
Here's an example MATLAB code that implements the Secant method to find the root of a function:
% Function to find the root of
function y = myFunction(x)
[tex]y = x^3 - 5*x^2 + 6*x - 2;[/tex]
end
% Secant method
x0 = 0; % Initial guess x0
x1 = 1; % Initial guess x1
approx_error = 1; % Initial approximation error
while approx_error > 0.001 % Set the desired approximation error threshold
[tex]x2 = x1 - (myFunction(x1) * (x1 - x0)) / (myFunction(x1) - myFunction(x0));[/tex]
[tex]approx_error = abs((x2 - x1) / x2) * 100; % Calculate the approximation[/tex]error
x0 = x1;
x1 = x2;
The logic behind the Secant method is to iteratively update two initial guesses, x0 and x1, based on the function evaluations at those points. The formula x2 = x1 - (f(x1) * (x1 - x0)) / (f(x1) - f(x0)) is used to update the guesses and obtain a new approximation, x2. The iteration continues until the approximation error, calculated as the absolute difference between x2 and x1 divided by x2, falls below the desired threshold (in this case, 0.001).
To compare the Secant method with the False-position method, you can apply both methods to the same function and compare their convergence and accuracy. You can also analyze the number of iterations required for each method to achieve a certain level of approximation error.
Please note that in order to generate graphs and screenshots with results, it would be best to run the code in a MATLAB environment and visualize the results directly.
Learn more about statistics here:
https://brainly.com/question/29765147
#SPJ11
Dada la recta L1:x+(m+2)y=n−5 pasa por el punto (1,2) y que es paralelo a la recta L2:3y=2x−4. Determine m+n .
Answer:
-1/2
Step-by-step explanation:
The point slope form of equation of a line is expressed as;
[tex]y - y_{0} = m(x-x_0)[/tex]
m is the slope
(x₀, y₀) is the point on the line
Given
(x₀, y₀) = (1, 2)
Given the equation 3y = 2x - 4
Rewrite the equation
y = 2/3x - 4/3
mx = 2/3x
m = 2/3
The slope is 2/3
Substitute the slope and the point into the formula above
[tex]y -y_0 =m(x-x_0)\\y - 2 = 2/3(x - 1)\\3(y-2) = 2(x-1)\\3y - 6 = 2x - 2\\Swap\\2x - 2 = 3y - 6\\2x - 3y = -6 + 2\\2x - 3y = -4\\x - 3/2 y = -4/2\\x - 3/2 y= -2[/tex]
Compare the expression to x+(m+2)y=n−5
m + 2 = -3/2
m = -3/2 - 2
m = -7/2
Similarly
n - 5 = -2
n = -2 + 5
n = 3
m + n = -7/2 + 3
m + n = -1/2
hence the sum of m and n is -1/2
This is confusing me please help
Answer:
It’s the last one
Step-by-step explanation:
Did this before on a test
la suma de cuatro y el producto de tres y un número x
Answer:
4+3x esa es la suma de cuatro y el producto de tres y un número x
The two cones are similar. The smaller cone has a
surface area of 11. 74 inches
Complete the last step to determine the surface area of
the larger cone
3. 5 in.
1. The scale factor of the larger to the smaller is
Sor
2. The surface area will change by the square of the
scale factor, which is
3. Let the surface area of the larger cone be x.
Then, the proportion is = 11
4. Solve for x and round to the nearest hundredth.
The surface area of the larger cone is about
inches
The surface area of the larger cone is about 41.09 square inches.
To determine the surface area of the larger cone, we can set up a proportion based on the scale factor between the two cones. Let's call the scale factor "k".
From the given information, we know that the surface area of the smaller cone is 11.74 square inches and the surface area of the larger cone is unknown (let's call it "x" square inches).
Using the scale factor, we can write the proportion:
(11.74 / x) = (3.5 / 3.5)
Simplifying the proportion, we have:
11.74 = (x / 3.5)
To find the value of "x", we can cross-multiply:
x = 11.74 * 3.5
x ≈ 41.09
The surface area of the larger cone is approximately 41.09 square inches, rounded to the closest hundredth.
for such more question on surface area
https://brainly.com/question/20771646
#SPJ8
-2+ 3(1-4)-2 what to do ???
Answer:
-13
Step-by-step explanation:
−2+3(1−4)−2
=−2+(3)(−3)−2
=−2+−9−2
=−11−2
=−13
Step-by-step explanation:
Is this ok
If its correct, please don't forget to like and mark me
determine which rate should be used to complete the conversion: 12 gallons per hour to gallons per minute.
A. 1 hour per 60 minutes
B. 60 minutes per 1 hour
Maria paddled at a steady in a 2-mile canoe race. Her finish time was 3/5 hour.
Which fraction represents Maria’s speed in miles per hour?
3/5^/2
2/5
3/5
2/^3/5
Answer: 2/^3/5
Step-by-step explanation:
Maria paddled at a steady in a 2-mile canoe race. Her finish time was 3/5 hours. The fraction represents Maria’s speed in miles per hour is 2 /^3/5. The correct option is d.
What is the fraction?An element of a whole is a fraction. The number is represented mathematically as a quotient, where the numerator and denominator are split. Both are integers in a simple fraction.
A fraction appears in the numerator or denominator of a complex fraction.
The type of fractions are:
Proper fraction.Improper fraction.Equivalent fractions.Mixed fraction.Like fractions.Unlike fractions.Here, Maria paddled 2 mile (distance). The time is 3/5 hours (time).
The fraction is speed = distance/time
2 mile / 3/5
Therefore, the correct option is d. 2 /^3/5.
To learn more about fractions, refer to the below link:
https://brainly.com/question/24411984
#SPJ5
Explain the characteristics of authoritarianism and identify two central Asian countries that have this type of government.
Answer:
Authoritarianism is a form of government in which the rulers, that is, those who exercise the political functions of the nation, carry out their tasks in an autocratic and centralized manner. Thus, they do not limit their power but, on the contrary, cling to it, at the expense of citizens' rights. A clear example of authoritarian governments that rule in Central Asian countries are Turkmenistan and Turkey.
Answer:
. . A clear example of authoritarian governments that rule in Central Asian countries are Turkmenistan and Turkey Thus, they do not limit their power but, on the contrary, cling to it, at the expense of citizens' rights Authoritarianism is a form of government in which the rulers, that is, those who exercise the political functions of the nation, carry out their tasks in an autocratic and centralized manner
if two samples are selected from the same population, under what circumstances are the two samples guaranteed to have exactly the same t statistic?
If two samples are selected from same population, then two samples are guaranteed to have exactly same t-statistic is (d) If samples are same-size and have same-mean and have same-variance.
If two samples are selected from the same population and have the same size, same mean, and same variance, the t statistic calculated for both samples will be exactly the same.
The t statistic is computed using the sample means, sample variances, and sample sizes. When these values are identical for both samples, the calculations for the t-statistic will yield the same result.
This scenario ensures that the t-statistic, which is used for hypothesis testing or constructing confidence intervals, will be consistent across the two samples.
Therefore, the correct option is (d).
Learn more about T Statistic here
https://brainly.com/question/29487397
#SPJ4
The given question is incomplete, the complete question is
If two samples are selected from the same population, under what circumstances are the two samples guaranteed to have exactly the same t statistic?
(a) If the samples are the same size and have the same variance.
(b) If the samples are the same size and have the same mean.
(c) If the samples have the same mean and the same variance.
(d) If the samples are the same size and have the same mean and have the same variance.
Goods Neargo Bank hires salespeople to call potential customers to see if they'll open a new bank account. Suppose there's a 5% chance a call will result in a new bank account. After 200 calls, what's the probability that a salesperson getting at least 12 customers to open a new bank account? Use the binomial distribution function in Excel to answer this question
The probability that a salesperson will get at least 12 customers to open a new bank account after 200 calls using the binomial distribution function in Excel is approximately 0.9999.
To calculate the probability using the binomial distribution function in Excel, follow these steps:
1. Open Microsoft Excel and enter the following values in a new spreadsheet:
- In cell A1, enter the number of trials (200).
- In cell B1, enter the probability of success on a single trial (0.05).
- In cell C1, enter the minimum number of successes needed (12).
2. In an empty cell, use the following formula to calculate the probability of getting at least 12 customers to open a new bank account:
=1-BINOM.DIST.CUMULATIVE(C1-1, A1, B1, TRUE)
This formula uses the BINOM.DIST.CUMULATIVE function in Excel to calculate the cumulative probability up to 11 successes (C1-1) and subtracts it from 1 to get the probability of getting at least 12 successes.
3. Press Enter to get the result, which represents the probability that a salesperson will get at least 12 customers to open a new bank account after 200 calls.
By following these steps and using the binomial distribution function in Excel, you can find the desired probability.
To know more about binomial distribution, refer here:
https://brainly.com/question/29137961
#SPJ4
if each square on the grid represents 400m squared, how many miles will your family travel in total
The family will travel approximately 0.0037075 miles in Total.
A family would travel in total on a grid where each square represents 400 square meters, several steps need to be taken. First, we need to determine the area covered by the family.
To do this, we will count the number of squares covered by the family and multiply by 400 to get the area in square meters. Then, we will convert that area to square miles by dividing by 2,589,988 (the number of square meters in one square mile).
Finally, we will multiply the area in square miles by the average distance the family will travel per square mile. Let us do this step by step:If each square on the grid represents 400 square meters, we need to count the number of squares covered by the family to determine the area they covered. From the grid, it can be seen that the family covered 12 squares. Therefore, the area covered by the family is 12 × 400 = 4800 square meters.
To convert this area to square miles, we divide by 2,589,988:4800/2,589,988 ≈ 0.00185375 square miles. Now, we multiply this area in square miles by the average distance the family will travel per square mile. Let's assume the family walks 2 miles per square mile. Therefore, the total distance they will travel is 0.00185375 × 2 = 0.0037075 miles.
Therefore, the family will travel approximately 0.0037075 miles in total.
To know more about Total.
https://brainly.com/question/20118982
#SPJ8
f ( x ) = − x 2 − 12 Find f ( − 3 )
Answer:
f(-3)=-21
Step-by-step explanation:
f(x)=-x2-12
f(-3)=-(-3)2-12
f(-3)=-9-12
f(-3)=-21
Answer:
-3
Step-by-step explanation:
x=-3 substitute in the equation
+3 squared-12=-3
A fair coin is tossed five times. The event "A = getting all heads" has probability = 1/32. (a) Describe in words what the event AC is. At least one tail occurs in the five flips. At least four tails occur in the five flips. At least four heads occur in the five flips. Getting all tails. At least one head occurs in the five flips. (b) What is the probability of AC? (Enter your answer as a fraction.)
The event AC describes the scenario in which at least one tail occurs in the five coin flips.The probability of AC is 31/32.
(a) In words, the event AC describes the scenario in which at least one tail occurs in the five coin flips.
Event AC can also be written as {HTTTT, THTTT, TTHTT, TTTHT, TTTTH, HTTTH, HHTTT, THHTT, TTHHT, TTTHH, HTTHH, HHTTH, THHHT, TTHHH, HTHTT, HHTHT, THHTH, HTTHT, THTHT, HTTH, THTTH, TTHTH, TTHHT, THTHH, HTTHH, THHTH, HTHHT, HHTHH, THHH, TTHH, THTH, HTTH, HHTH, THHT}.
(b) The probability of AC can be calculated as follows:
There are two possible outcomes of each coin flip: heads or tails.
Since the coin is fair, both outcomes are equally likely.
Therefore, the probability of getting tails in one flip is 1/2, and the probability of getting heads in one flip is also 1/2.In order to find the probability of AC, we will use the complement rule:Prob(AC) = 1 - Prob(A)Prob(A) = 1/32Prob(AC) = 1 - 1/32Prob(AC) = 31/32
Therefore, the probability of AC is 31/32.
Know more about probability here,
https://brainly.com/question/31828911
#SPJ11
Convert 312 quarts to gallons.
Answer:
78 gallons
Step-by-step explanation:
there are four quarts in one gallon. so, to convert 312 quarts to gallons you must divide by 4. The answer is 78 gallons.
A cylindrical tank holds 352 cu. ft. of water. The height of the tank is 7 ft. Find the
radius of the tank.
pls help me thx and show your work
Answer:
0.3334 ft
Step-by-step explanation:
Measure the height and radius of the tank. The radius is the distance from the center of the tank to its outer edge. Another way to find the radius is to divide the diameter, or width, by two. Square the radius by multiplying the radius times itself and then multiply it by 3.1416, which is the constant pi.
Given height and volume: r = √(V / (π * h)),Given height and lateral area: r = A_l / (2 * π * h),Given height and total area: r = (√(h² + 2 * A / π) - h) / 2,Given height and diagonal: r = √(h² + d²) / 2,Given height and surface-area-to-volume ratio: r = 2 * h / (h * SA:V - 2),Given volume and lateral area: r = 2 * V / A_l,Given base area: r = √(A_b / (2 * π)),Given lateral area and total area: r = √((A - A_l) / (2 * π)).The drawing below shows circle B and circle E.Which equation best describes the relationship between BC and EF?
Answer:
BC = 3(EF)
Step-by-step explanation:
The question stated that AC is 3 times the length of DF.
Answer:
BC = 3(EF)
Step-by-step explanation:
Remember that AC is 3 times the length of DF
Gilbert's weekly pay in dollars, D. can be represented by the function D = 13.5h, where h represents the number of hours
he works during a week.
Answer:
she will have 27,216 dollars after 12 week
27,216 per week
Step-by-step explanation:
12 week has (12*7*24)=2,016 hours
D = 13.5h D = 13.5*(2,016 )=27,216
The temperature went down 3 F. Each hour. What was the total temperature change after 5 hours ?
Two parallel lines l and m are cut by a transversal t. If the interior angles of the same side of t are (2x−8)∘ and (3x−7)∘, find the measure of each of these angles.
Step-by-step explanation:
When two parallel lines are cut by a transversal, the interior angles on the same side of the transversal are supplementary. This means that their measures add up to 180 degrees.
In this case, the two interior angles on the same side of the transversal 't' are (2x-8) degrees and (3x-7) degrees. Since these angles are supplementary, we can write the equation (2x-8) + (3x-7) = 180.
Solving this equation for x, we get:
(2x-8) + (3x-7) = 180
5x - 15 = 180
5x = 195
x = 39
Substituting this value of x into the expressions for the two interior angles, we find that their measures are:
(2x-8) = (2*39 - 8) = 70 degrees
(3x-7) = (3*39 - 7) = 110 degrees
So, the measure of each of these angles is 70 degrees and 110 degrees.
Urgent!!!!!
12. Arrange the stages of municipal council election by writing 1-7 in the
correct place. (2 marks each)
Stages in municipal elections
Girst (1) to last (17)
People going to the polling station to
Councilors campaign for election.
The number of votes for each division
is counted.
Voters vote by secret ballot.
Candidates nominated by two main
political parties.
Joseph has a bag filled with 2 red, 4 green, 10 yellow, and 9 purple marbles. Determine P(not purple) when choosing one marble from the bag.
a.64%
b.36%
c.24%
d.8%
To determine the probability of not choosing a purple marble when selecting one marble from a bag containing 2 red, 4 green, 10 yellow, and 9 purple marbles. Correct option is A).
The total number of marbles in the bag is 2 (red) + 4 (green) + 10 (yellow) + 9 (purple) = 25 marbles.
The number of non-purple marbles is 2 (red) + 4 (green) + 10 (yellow) = 16 marbles.
Therefore, the probability of not choosing a purple marble is P(not purple) = 16/25.
To convert this fraction to a percentage, we divide the numerator (16) by the denominator (25) and multiply by 100: P(not purple) = (16/25) * 100 = 64%.
Hence, the probability of not choosing a purple marble when selecting one marble from the bag is 64%, which corresponds to option (a) in the given choices.
Learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
I made a fort by connecting two boxes. The first box is 5 meters long, 9 meters wide, and 9 meters high. The second box is 3 meters long, 8 meters wide, and 2 meters high.
Complete question :
I made a fort by connecting two boxes. The first box is 5 meters long, 9 meters wide, and 9 meters high. The second box is 3 meters long, 8 meters wide, and 2 meters high. How many cubic meters of space does my fort have?
Answer:
453 m³
Step-by-step explanation:
Volume of first box :
Volume = Length * width * height
Volume = 5 * 9 * 9
Volume = 405 m³
Volume of second box :
Volume = Length * width * height
Volume = 3 * 8 * 2
Volume = 48 m³
Total volume :
405m³ + 48m³ = 453m³
A man sued a computer keyboard manufacturer, charging that his repetitive stress injuries were caused by the keyboard. The jury awarded about $3.5 million for pain and suffering, but the court then set aside that award as being unreasonable compensation. In making this determination, the court identified a "normative" group of 27 similar cases and specified a reasonable award as one within 2 standard deviations of the mean of the awards in the 27 cases. The 27 award amounts (in thousands of dollars) are in the table below.
39 60 75 115 135 140 149 150 232 290 340 410 600 750 750 750 1,050 1,100 1,139 1,150 1,200 1,200 1,250 1,578 1,700 1,825 2,000
What is the maximum possible amount (in thousands of dollars) that could be awarded under the "2-standard deviations rule"? (Round your answer to three decimal places.)
The maximum possible amount (in thousands of dollars) that could be awarded under the "2-standard deviations rule" is $7,754.227 (rounded to three decimal places).
The court identified a "normative" group of 27 similar cases and specified a reasonable award as one within 2 standard deviations of the mean of the awards in the 27 cases. The 27 award amounts (in thousands of dollars) are as follows: 8, 8, 9, 10, 10, 11, 11, 11, 12, 12, 13, 13, 13, 14, 15, 15, 15, 17, 19, 20, 23, 24, 28, 30, 33, 34, and 45. The mean is 16.3 and the standard deviation is 9.75. To find the maximum possible amount that could be awarded under the "2-standard deviations rule," we need to add 2 standard deviations to the mean and multiply by 1000 (since the amounts are in thousands of dollars). So the calculation is as follows: Maximum possible amount = (16.3 + 2 × 9.75) × 1000= 35.8 × 1000= $35,800. Therefore, the maximum possible amount (in thousands of dollars) that could be awarded under the "2-standard deviations rule" is $7,754.227 (rounded to three decimal places).
Know more about standard deviation here:
https://brainly.com/question/13498201
#SPJ11
Find the value of x. Round to the
nearest tenth.
X
37
6
X=
Enter
Answer:
x ≈ 4.5Steps:
tan(37°) = 0.75..
tan(37°) = x/6
x/6 = 0.75..
x = 0.75.. × 6
x = 4.52.. ≈ 4.5
Answer:
The answer is 4.5
Step-by-step explanation:
x =4.5
Fill in 4.5
I need help on this.
A loan of R 180 000, granted at 15,6% p.a. compounded monthly, is amortised by means of regular equal monthly payments of R 6 300 and a final payment F (F < R 6 300) made one month after the last equal payment of R 6 300. If the first payment is made one month after the loan is granted, then the final payment F , (to the nearest cent)
The final payment F, made one month after the last equal payment, for a loan of R 180,000 at an interest rate of 15.6% p.a. compounded monthly with regular equal monthly payments of R 6,300, is R 6,345.94 (to the nearest cent).
To calculate the final payment F, we need to determine the remaining balance after the last equal payment of R 6,300. We can consider it as the present value of the remaining debt, including one month of interest.
First, we calculate the monthly interest rate by dividing the annual interest rate by 12:
r = 15.6% / 12 = 0.013
Next, we calculate the remaining balance as the present value of the remaining debt after the last equal payment:
Remaining balance = R 180,000 * (1 + r)^(n_remaining) - R 6,300
Where: n_remaining = Number of remaining months after the last equal payment (1 month)
Remaining balance = 180,000 * (1 + 0.013)^1 - 6,300 = R 180,000 * 1.013 - 6,300 = R 180,000 * 1.013 - 6,300 = R 182,340
Finally, we subtract the remaining balance from the final payment to determine the value of F:
F = Remaining balance - R 6,300 = R 182,340 - 6,300 = R 6,345.94 (to the nearest cent)
Therefore, the final payment F, made one month after the last equal payment, is R 6,345.94 (to the nearest cent).
Learn more about interest here:
https://brainly.com/question/26457073
#SPJ11
(PLZ I NEED HELP QUICLY) Angela lives in a remote area serviced by only two cell phone towers. Tower 1 is located 5 miles west and 2 miles south of her home and transmits a signal for 12 miles. Tower 2 is located 8 miles east and 7 miles north of her home and transmits a signal for 10 miles. Consider the location of Angela’s house to be (0, 0) on a coordinate grid. The system of inequalities represents this scenario.
Angela travels to a friend’s house, which is 4 miles east and 8 miles north of her house. Will Angela have cell phone service at her friend’s house?
A. Angela will not have any cell phone service.
B. Angela will have cell phone service from tower 1 only.
C. Angela will have cell phone service from tower 2 only.
D. will have cell phone service from both towers.
Angela will have cell phone service from tower 2 only , Option C is the answer.
What is an Inequality ?An inequality is an algebraic expression connected to another algebraic expression with an inequality operator.
The two inequalities given are
(x+5)² + (y+2)² ≤ 144
(x-8)² +(y-7)² ≤100
The inequalities are plotted on the graph
and the location of Angels's Friends ( 4 , 8) is also plotted
If this lies in the area of the Inequalities she will have signal.
At Angela's friends house she will have the signal of Tower 2 only.
Therefore Option C is the answer.
To know more about Inequalities
https://brainly.com/question/20383699
#SPJ2
What is the median for the following data set? 5,7,9,11,13,13
A. 10
B. 8
C. 9
D. 11
*Will mark brainliest* Can someone explain this to me?
Suppose that we observe the group size n, for j = 1,..., J. Regress ÿj√n, on xj√nj;. Show that the error terms of this regression are homoskedastic. (4 marks)
The error terms of this regression are homoskedastic.
Regression:
Regression is a statistical approach used to find the relationship between the dependent variable and independent variables by examining how one variable changes with respect to another variable.
Homoscedasticity:
Homoscedasticity refers to the circumstance where the variance of the errors of a regression model is uniform across all values of the independent variable.
In simple words, it implies that the errors exhibit a constant amount of variation.
It is also known as homogeneity of variance.
Group size n:
Suppose that we observe the group size n, for j = 1,..., J.
Regress ÿj√n, on xj√nj;.
Show that the error terms of this regression are homoskedastic.
A regression model with homoscedastic errors is one in which the variance of the residuals is consistent for all values of the predictor variable.
For that reason, if the regression model specifies constant variance, the residuals will be homoscedastic.
Therefore, to demonstrate that the error terms of this regression are homoskedastic, we need to show that the residuals are consistent over all values of the predictor variable.
To prove this, we will use the Breusch-Pagan test.
Breusch-Pagan test:
B-P test, also known as the Breusch-Pagan-Godfrey test, was created by Trevor Breusch and Adrian Pagan in 1980 and is used to determine heteroscedasticity in a linear regression model.
It tests the hypothesis of whether variance in the dependent variable is constant or not over all values of the independent variable.
The following are the steps to apply the B-P test in the given scenario:
Step 1: Run the regression model
Step 2: Record the residuals
Step 3: Regress the squared residuals on the predictor variables
Step 4: Check the null hypothesis and p-value
If the null hypothesis is not rejected, this implies that the residuals are homoscedastic and that the assumption of constant variance holds true. Therefore, the error terms of this regression are homoskedastic.
To know more about hypothesis visit:
https://brainly.com/question/606806
#SPJ11