Answer: 5.2
Explanation:
[tex]\text{pH}=-\log([\text{H}^{+}])\\\\=-\log(6.2 \times 10^{-6})\\\\=5.2[/tex]
Each of the following atoms will form a diatomic molecule. Determine if it will bond with a single, double, or triple bond.
1. Which has greater solubility: baking soda or table sugar? Why?
table sugar, because much more of it can be dissolved in water.
baking soda, because it makes a solvent bubble.
table sugar, because it makes a solvent sweet.
baking soda, because much more of it can be dissolved in water.
Identify reagents that can be used to accomplish the following transformation:
The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagents in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer.
CH3MgBr is a reagents that can be used to accomplish the following transformation.
When primary alcohol is oxidised with a mild oxidising agent, it produces aldehyde, and when oxidised with a strong oxidising agent, it continues to oxidise.
carnosic acid Secondary alcolin does not undergo oxidation with oxidising agents gure ketone and textiary alcohol due to a lack of replaceble H bonded to carbon.
What is the name of ch3mgbr?
Methylmagnesium bromide.
When Grignard reagent CH3MgBr is treated with water we get?
Grignard reagent is not water stable and interacts with it. The interaction of methylmagnesium bromide (CH3MgBr) with water (H2O) produces methane (CH4) and MgBr (OH). This reaction efficiently hydrolyzes water to generate products.
Hence CH3MgBr is a correct answer.
To know more about CH3MgBr follow link
https://brainly.com/question/28187180
#SPJ4
. Cause and Effect Robert is cooking red
cabbage in tap water and notices that the
water turns purple. When he adds the vinegar
required by the recipe, the water turns pink.
Explain what happened.
Answer:
rfjc I N E NUMBER ++78+47+97+38+06--+78+47+97+38-06--I N E
Answer: The water becomes more acidic
Explanation:
Since the average ph of water is 7 and vinegar is an acidic substance with a ph ranging from 2-3. When it is added to water which is also a neutral substance, the water becomes more acidic.
The prevailing atmospheric pressure on a plateau in Colorado is 0.732 atm. Express this pressure in pounds per square inch, kilopascals, pascals, millimeters Hg, and inches Hg.
Hint: 1 atm = 101.3 kPa = 1.013×105 Pa = 760 mm Hg = 14.69 psi = 29.92 in Hg
The given atmospheric pressure in different units is equal to:
0.732 atm = 10.75 psi
0.732 atm = 74.2 kPa
0.732 atm = 7.41 ×10⁴ Pa
0.732 atm = 556.32 mmHg
0.732 atm = 21.9 Hg
What is atmospheric pressure?Atmospheric pressure can be defined as the pressure within the atmosphere of Earth. The standard atmosphere is expressed as a symbol atm and is equal to a unit of pressure 101,325 Pa.
The atm unit can be described as equivalent to the sea-level atmospheric pressure on Earth and is equal to 1 atm.
Given, the 1 atm is equal to = 14.69 psi
Then 0.732 atm will be equal to = 14.69 × 0.732 = 10.75 psi
the 1 atm is equal to = 101.3 kPa
Then 0.732 atm will be equal to = 101.3 kPa × 0.732 = 74.2 kPa
the 1 atm is equal to = 1.013×10⁵ Pa
Then 0.732 atm will be equal to =1.013×10⁵ Pa× 0.732 = 7.41 ×10⁴ Pa
1 atm is equal to = 760 mmHg
Then 0.732 atm will be equal to = 760 × 0.732 = 556.32 mmHg
1 atm is equal to = 29.92 Hg
Then 0.732 atm will be equal to = 29.92 × 0.732 = 21.9 Hg
Learn more about atmospheric pressure, here:
brainly.com/question/28310375
#SPJ1
Which of the following molecules are polar? A. NH3 B. SF4 C. XeF4 D. CCl4
E. CO2
A. NH3 & B. SF4 are the two best options. They have polar bonds, which makes them polar molecules.
Describe polar bonds.A polar covalent link is a type of covalent bond where the atoms are attracted to electrons in uneven amounts, resulting in unequal sharing. When two molecules form a polar covalent link, also known as a polar molecule, the electron distribution surrounding a molecule is no more symmetrical.
How can I tell whether a connection is polar?Despite the lack of hard and fast standards, the general rule is that a bond is termed nonpolar if the gap in electronegativities is smaller than or equal to 0.4, and polar if indeed the difference is greater.
To knowmoreabout polar molecules visit:
https://brainly.com/question/24775418
#SPJ4
A given sample of n2 gas has a pressure of 0. 30 atm at 30. 0 °c. If the volume is 2. 0 l, how many moles of n2 are present?.
There would be 0.0781 mol of N2 at 0.3 atm pressure and 30 °C.
How can Avogadro's number be used to find moles?By multiplying or dividing, one can utilize Avogadro's number to convert between molecules and moles: To convert from moles to molecules, multiply the number of moles by 6.02 x 1023. To convert the amount of molecules to moles, multiply it by 6.02 x 1023.
How do you count moles?The molar volume of a gas is 22.414 L/mol at STP, which is defined as 0°C (273.15 K, 32°F) and 1 atm.
Calculate the moles of nitrogen in 1.75 L at STP using dimensional analysis.
1.75 L N2 divided by 1 mole per 22.414 L equals 0.0781 mol N2 to three 2 digits.
What is a mole's value?6.02214076 x 1023 of any chemical unit, such as atoms, molecules, ions, and others, constitute a mole. The mole is a useful measure to employ because any substance is made up of a lot of atoms, molecules, or other parts.
Learn more about moles here:
brainly.com/question/26416088
#SPJ4
What is the osmotic pressure of a 0.431 M solution of sodium phosphate (Na₃PO₄) in water at a temperature of 40.0 °C? Assume the sodium phosphate completely dissociates in water. R = 0.08206 L･atm/K･mol
The osmotic pressure of a 0.431 M solution of sodium phosphate in water is equal to 44.25 atm.
What is osmotic pressure?The osmotic pressure of a solution can be defined as the minimum pressure that needs to be applied to a solution to prevent the flow of the solvent across a semipermeable membrane. The determination of the tendency of a solution to take in a solvent by osmosis is called osmotic pressure.
To determine the osmotic pressure of the solution the concentration of the compound can be determined.
π = i × CRT
Given the concentration of the solution, C = 0.431 M
The temperature, T = 40.0 °C = 40 + 273 = 313 K
The value of the gas constant, R = 0.08206 L･atm/K･mol
The number of ions on the dissociation of sodium phosphate, i = 4
The osmotic pressure of the solution of sodium phosphate is:
π = 4× 0.431 × 0.082 ×313
π = 44.25 atm
Learn more about osmotic pressure, here:
brainly.com/question/10046758
#SPJ1
Please help! I am stuck with this question!
The enthalpy of reaction for the given reaction is -1172 KJ. The formation enthalpy of oxygen is zero. Option D is correct.
What is reaction enthalpy?Enthalpy change of a reaction is the change in heat energy absorbed or released from a reaction. The change in enthalpy of a reaction is the difference of sun of change in enthalpies of the products and sum of change in enthalpies of the reactants.
Here, the reaction enthalpy can be written as:
ΔH(rxn) = [(6 ΔHf (H₂O) + (4 ΔHf (NO)] - [(4 ΔHf (NH3) + (5 ΔHf (O₂)].
The formation enthalpy of molecular oxygen in its standard state is 0.
Thus, ΔH(rxn) = [(6 × (-286 ) + (4 × 90) kJ/mol ] - [(4 × (-46 kJ/mol) ]
= -1172 kJ.
Therefore, the reaction enthalpy for the given reaction is - 1172 kJ.
To find more on reaction enthalpy, refer here:
https://brainly.com/question/1657608
#SPJ1
Choose all of the following that are true about the endpoint of a titration with 1:1 stoichiometry using phenolphthalein indicator.
a)The amount of analyte equals the amount of titrant added.
b)The solution will change from colorless to a faint pink color that lasts 30 seconds or so.
c)The amount of analyte is twice the amount of titrant added.
d)The amount of analyte is half the amount of titrant added.
e)The solution will change from colorless to a bright pink.
The following are correct about the endpoint of a titration
a)The amount of analyte equals the amount of titrant added.
b)The solution will change from colorless to a faint pink color that lasts 30 seconds or so.
d)The amount of analyte is half the amount of titrant added.
e)The solution will change from colorless to bright pink.
The endpoint of a titration is the point at which the reaction between the reactants is complete, resulting in the formation of a precipitate, color change, or another measurable indicator. The endpoint is typically determined by an indicator, a compound that changes color at a certain pH.
For more questions like Titration click the link below:
https://brainly.com/question/29673466
#SPJ4
If 14 grams of Aluminum reacts with 23 grams of Oxygen it will yield grams of Aluminum oxide.
The yield of aluminum oxide is 47g
What is aluminum ?
Chemical element aluminium (Al), also written aluminium, belongs to the major Group 13 (IIIa, or boron group) of the periodic table. It is a light, silvery white metal. The most common nonferrous metal and the most plentiful metallic element in the crust of the Earth is aluminium.
What is oxygen ?
Chemical elements are substances that only contain one sort of atom, such as oxygen. An oxygen atom contains eight protons in its nucleus, as indicated by its atomic number of 8 and official chemical symbol, O. At room temperature, oxygen is a gas that is flavorless, odorless, and colorless.
We first need to write down a balanced equation for the reaction:
4Al+3O2→2Al2O3
Now, we determine the number of moles of aluminum: 25.0g27.0g/mol=0.93mol
We know that 4 moles of Al react with 3 moles of O2, so the mole ratio is 4:3. This means we need (3/4)*0.93 mol= 0.69 mol of O2. If we multiply this by the molar mass of O2 (32 g/mol), we get 22.2 g of oxygen needed.
We know that for every 4 moles of Al, there will be formed 2 moles of Al2O3, so the mole ratio is 2:1. This means we will get 0.46 moles of Al2O3. Multiply by the molar mass of Al2O3 (102 g/mol), and we get 47 g.
Therefore, the yield of aluminum oxide is 47g.
Learn more about aluminum from the given link.
https://brainly.com/question/25869623
#SPJ1
See page 467
17 Question (1 point)
A bomb calorimeter can be used to measure the enthalpy of reaction for combustions, such as the combustion of diborane represented by the
following balanced equation:
B₂H(g) + 30₂(g) →→→→ B₂O3(s) + 3H₂O(g)
-
AHcombustion for this process is -1958 kJ/mol.
V
1st attempt
Assume that 0.541 g of diborane is combusted in a calorimeter whose heat capacity (Ccalorimeter) is 7.854 kJ/°C at 22.61°C. What is the
final temperature of the calorimeter?
°C
4
12 OF 17 QUESTIONS COMPLETED
Jil See Periodic Table See Hint
< 17/17 >
SUBMIT ANSWER
Write the balanced equation for the reaction of the acid anhydride N2O5 with water. Give the balanced reaction in molecular form (do not show any dissociated ions) for the formation of the acid when it is dissolved in water.
Do not include state (phase) information for the reactants or products.
Exclude any coefficients equal to 1.
Answer:
N2O5 + H2O => 2HNO3
Explanation:
N2O5 + H2O => 2HNO3
N = 2
O = 6
H = 2
I hope this helps.
Many metabolites are maintained at steady-state concentrations that are far from equilibrium. A comparison of K' and Q, the mass-action ratio, can determine whether a metabolic reaction is far from equilibrium.
The equation for this equilibrium is,
fructose 6-phosphate + ATP ⇄ fructose 1,6-bisphosphate + ADP
Calculate K' for this reaction at T=25.0°C
Δ G'=-14.2 kJ/mol
K'=
Calculate the mass-action ratio, Q, from the approximate physiological concentrations for rat heart tissue shown in the table.
Q=
The reaction quotient (Q) is 0.032 while the equilibrium constant (K'eq) is 3.1 * 10^2 .
What is the equilibrium constant?We know that the equilibrium constant has to do with a value that shows the extent to which the reactants have been converted into products. If the equilibrium constant is high, then a lot of the reactants would be seen to be converted into products.
In this case we are first required to obtain the reaction quotient Q and this can be done by the use of the formula;
Q = [fructose 1,6-bisphosphate] [ADP]/[fructose 6-phosphate] [ ATP]
Q = [25] [1340]/[84] [12500]
Q = 33500/ 1050000
Q = 0.032
ΔG = -RTlnQ
ΔG = change in free energy
R = gas constant
T = temperature
Q = reaction quotient
We also know that;
ΔG' = -RTlnK'eq
-14.2 * 10^3 = -(8.314 * 298)lnK'eq
lnK'eq = -14.2 * 10^3/-(8.314 * 298)
lnK'eq = 5.73
K'eq = e^5.73
K'eq = 3.1 * 10^2
Learn more about equilibrium constant:https://brainly.com/question/10038290
#SPJ1
According to Le Chatelier's Principle, adding reactants to a chemical reaction
A) proceed to the right, increasing the formation of reactants.
B) proceed to the right, increasing the formation of products.
Q) proceed to the left, decreasing the formation of reactants.
D) proceed to the left, decreasing the formation of products.
CyclohexagonaL, C6H11OH, is an organic chemical used in the production of nylo cyciohexagonal? Give your answer in scientific notation.
41) )
A) 5.09 × 10²⁵
Answer:
proceed to the right, increasing the formation of product
Hybridization predicts geometry best for:
A. small atoms
B. large atoms
C. electronegative atoms
D. gaseous atoms
Covalent bonds are formed when two or more atoms (often...) share electrons. Better (more stable) than larger formal charges are smaller ones.
Does molecular geometry or electron geometry underlie hybridization?The electron geometry is the foundation for hybridization. Observe the VSEPR Table to ascertain the hydridization of a molecule's core atom. How do sp3 orbitals come into being? The combination of one s and three p orbitals results in four sp3 orbitals.
What are the distinctions between shape and geometry in hybridization?When a molecule's geometry shows how bond pairs and lone pairs are arranged around the central atom as well as the coordination number of the molecule. The lone pairs around the central atom.
To know more about hybridization visit:
https://brainly.com/question/14140731
#SPJ4
the term 100% shut off means: the term 100% shut off means: gas burner and regulator is shut off gas to a pilot and the manifold is shut off. gas to the manifold and burner is shut off gas to the regulator and burner is shut off.
The term 100% shut off means: gas burner and regulator is shut off gas to a pilot and the manifold is shut off.
The 100% shutoff system is the system where where the failure in the flame device system take place and the in both the the pilot valve and the main gas valve are shut off . the complete shut off means that the pilot should shut off for any reason, the gas valve will not allow any gas to flow either that is to the main burner or to the pilot burner thus is means the 100% shutoff system
Thus, the 100% shutoff system means the failure in the flame proving device.
To learn more about shut off here
https://brainly.com/question/23572701
#SPJ4
If an object has a force of 13.5 newtons, how much would it weigh in pounds?
3
5
10
If an object has a force of 13.5 newtons, 3 lb would it weigh in pounds.
What is Newton's 2nd law of motion?According to Newton's Second Law of Motion, acceleration (gaining speed) occurs whenever a force acts on a mass (object). Riding a bicycle is a great example of this rule of motion in action. The mass is your bicycle. The force is generated by leg muscles pulling on your bicycle's pedals.
As we know from Newton's 2nd law of motion,
F = mg
here, F = 13.5 N
g = 9.8 m/sec
m = ?
Now, putting the values, F = mg
13.5 N = m × 9.8 m/sec
m = (13.5 N)÷(9.8 m/sec)
m = 1.378 kg
m = 3.04 lb [ As, 1 kg = 2.2046 lbs ]
To know more about force refer to:
https://brainly.com/question/12785175
#SPJ1
aluminum reacts with hcl to produce h2 gas and alcl3 . write the balanced chemical equation for this reaction. if x
substituted twice.In the arrow, the reactants are on the left and the products are on the right.
What happens when HCl and AlCl3 interact?The dissolution of the metal in hydrochloric acid results in the production of aluminum chloride and colorless hydrogen gas.Because the finished products do not interact, this reaction cannot be stopped.Hydrochloric acid reacts with metallic aluminum to produce an oxidation-reduction process.
What happens when Al and HCl are combined?Aluminum chloride (AlCl3) is the product of almost all reactions between hydrochloric acid and aluminum (or its derivatives).Water and organic solvents like nitrobenzene, dichloroethane, and acetone work well to dissolve the salt.
To know more about chemical equation visit:
https://brainly.com/question/28294176
#SPJ4
Calculate the pressure of nitrogen gas at 273k and Molar Volume of 22.414Lmol-¹ compare the result with that of an ideal gas at the same temperature and molar volume
Gas has a molecular volume of 22.4 litres at 273 K and 1 atm. The answer to the given question is 1 atm, 1 mol, and 273°C, or 546K.
STP is at 273K; why?STP is frequently used when calculating gas properties, like gas density. The standard pressure is 1 atm, and the standard temperature is 273 K (0° Celsius or 32° Fahrenheit). At atp equal at sea level, this is the freezing point of pure water.
How does the formula for Charles Law work?Charles' law is defined as follows, and this is how we might express the equation for Charles' law: The initial volume and temperature, V1 and T1, are equal to V2 and T2, respectively.
Learn more about gas law here:
https://brainly.com/question/28257995
#SPJ1
Solid titanium dioxide is heated with chlorine gas in the presence of solid carbon as a reducing agent to form gaseous TICI, and
a diatomic gas.
Enter the balanced chemical equation for the metallurgical reaction. Include physical states.
Thee correct equation of the reaction is;[tex]TiO_{2} (s) + 2Cl_{2} (g) + 2C(s)------ > TiCl_{4} (g) + 2CO(g)[/tex]
What is a chemical reaction equation?We know that a chemical reaction is said to occur when there is a combination of one or more reactants and there is a new product that is formed in the process. We know that the formation of the new product would mean that there is the breaking of bonds in the reactants such that new bonds can be formed in the products.
We know that a chemical reaction is said to be balanced when the number of atoms of each of the elements on the reactants side is equal to the number of atoms on the products side.
Here we are told that solid titanium dioxide is heated with chlorine gas in the presence of solid carbon as a reducing agent to form gaseous titanium IV chloride.
Learn more about chemical reaction:https://brainly.com/question/29039149
#SPJ1
The picture shows a bicyclist increasing speed while riding down a hill during a bicycle race.
Which statement BEST describes the potential and kinetic energy of this bicyclist?
The best way to sum up the cyclist's potential and kinetic energy is to say that as she progresses up the hill, her kinetic energy rises and her potential energy falls.
What is potential and kinetic energy?The object or system is unaffected by external factors like air pressure or altitude. On the other hand, kinetic energy refers to the force of moving particles within a system or an object.
Kinetic energy is the energy a thing has as a result of motion. A force must be applied to an object in order to accelerate it.We have to work hard in order to apply a force. Once the work is finished, energy is transferred to the item, at which point it moves at a new, constant speed.
What is difference between potential and kinetic energy?Potential energy is the energy that an object or system has stored as a result of its placement or configuration. An object's kinetic energy is measured in relation to stationary and moving items in its immediate environment. Potential energy is independent of an object's surroundings.
To know more about Potential and Kinetic Energy visit:
https://brainly.com/question/15764612
#SPJ1
The orbitals within a set of hybrid orbitals will have: Select the correct answer below: O equivalent shape but differing energy O equivalent energy but differing shape O equivalent shape and energy O depends on the type of hybrid orbitals
The orbitals within a set of hybrid orbitals will have equivalent shape and energy. Thus, the option (c) is correct.
Atomic orbitals that are formed by the combination of the valence orbitals on an atom is known as hybrid atomic orbital. The hybrid orbitals that are formed have different energies and shapes compared to the atomic orbitals that combine to form the hybrid orbitals. Hybrid orbitals helps us in explaining the shapes of the molecules and other bonding properties.
The number of hybrid orbitals in a set is equal to the number of atomic orbitals that were combined to produce the set. All orbitals in a set of hybrid orbitals are equivalent in shape and energy.
Learn more about hybrid orbitals from the link given below.
https://brainly.com/question/16093015
#SPJ4
Give the overall and net ionic equations for the titration of HCl with NaOH. If the titration was performed with BTB, what is observed at the endpoint?
HCl(aq) + NaOH (aq) ⇒ H2O (l) +NaCl (aq) [ titration ]
H+ + OH ⇒ H2O (l)
The definition of titration:A titration is a method for figuring out all the concentration of the solution by using a solution with known concentration. Until the reaction is finished, the titrant (the known solution) is typically added from the a buret to a known volume of the analyzer (the unknown solution).
How is titration performed?A burette, which is basically a long, graduated measurement rod with such a stopcock and a distribution tube at its bottom end, is used to gradually administer a standard solution of titrant reagent, or titrant, to a specified concentration.
To know more about titration visit:
https://brainly.com/question/21504465
#SPJ4
15. Which sample of argon gas has the same number of atoms as a 100.-milliliter sample of helium gas at 1.0 atm and 300. K? A) 50. mL at 1.0 atm and 300. K (B) 50. mL at 0.5 atm and 300. K C) 100. mL at 0.5 atm and 300. K D) 100. mL at 1.0 atm and 300. K
The sample of argon gas that has the same number of atoms as a 100 milliliter sample of helium gas at 1.0 atm and 300 is 100. mL at 1.0 atm and 300. K
The correct option is D.
What is the number of moles of gases in the given samples?The number of moles of gases in each of the given samples of gas is found below using the ideal gas equation.
The ideal gas equation is: PV/RT = n
where;
P is pressureV is volumen is number of moles of gasT is temperature of gasR is molar gas constant = 0.082 atm.L/mol/KMoles of gas in the given helium gas sample:
P = 1.0 atm, V = 100 mL or 0.1 L, T = 300 K
n = 1 * 0.1 / 0.082 * 300
n = 0.00406 moles
For the argon gas sample:
A. n = 1 * 0.05 / 0.082 * 300
n = 0.00203 moles
B. n = 0.5 * 0.05 / 0.082 * 300
n = 0.00102 moles
C. n = 0.5 * 0.1 / 0.082 * 300
n = 0.00203 moles
D. n = 1 * 0.1 / 0.082 * 300
n = 0.00406 moles
Learn more about ideal gas equation at: https://brainly.com/question/24236411
#SPJ1
Use the periodic table to find the atomic masses of H and O
Move the pink numbers into the equation (blue and yellow boxes).
Solve the equation.
Write the
answer in the
green box.
You're wanting to figure out the molar mass of H2O2, which tells you the mass of one mole of this compound. There are 2 hydrogen (H) atoms and 2 oxygen (O) atoms in one molecule of H2O2, so you have to add the masses of these 4 atoms.
Different elements have different molar masses. When you look at hydrogen (H) on a periodic table (if you looked up "periodic table" and hover over H with your cursor), there will be a number, 1, that shows how many protons an atom of hydrogen has, and there will be another number (that's relevant to this problem), 1.0078 (or rounded to 1.008), that shows the mass of an atom of that element. Looking on a periodic table, hydrogen has a molar mass of 1.008 and oxygen has a molar mass of 15.999.
To figure out the molar mass of H2O2, you add two hydrogen atoms, which each have a mass of 1.008, with two oxygen atoms, which each have a mass of 15.999.
2 (1.008) + 2 (15.999) = molar mass of H2O2
Naturally occurring unsaturated fatty acid chains are ___ and the melting point will ___ as the number of pi-bonds in the fatty acid chain increase.
a) conjugated; increase
b) conjugated; decrease
c) isolated; increase
d) isolated; decrease
The correct option is d) isolated, decrease.
What are fatty acids?
Fatty acids are long chain aliphatic hydrocarbons having carboxylic acids as a functional group. Fatty acids are classified into saturated and unsaturated. And also, important part of biomolecules.
Naturally occurring fatty acids have even number of carbon atoms and unbranched. Most of the naturally occurring fatty acids are not conjugated so the melting point of fatty acids decreases as number of bonds increases.
The increase in number of double bonds will create kinks, this restricts the molecule to be closed packed hence melting point decreases.
For more information about fatty acids please visit:
https://brainly.com/question/26353151
#SPJ4
dicyclohexylcarbodiimide (dcc) assists in the conversion of a carboxylic acid and an amine into an amide .
In order to prepare amide bonds, dicyclohexylcarbodiimide (DCC) was first used as a coupling reagent by Sheehan and Hess in 1955.
Since then, DCC has been employed for peptide synthesis. An O-acylisourea active intermediate plays a role in the creation and propagation of an amide or peptide bond in this process. It would be difficult to overestimate the significance of the typical carboxylic acid reaction with dicyclohexylcarbodiimide (DCC) and amines to produce amides in the synthesis of peptides, especially in the solid phase (Scheme 1). Dicyclohexylcarbodiimide, sometimes known as DCC, is a dehydrating agent typically employed in the laboratory to manufacture proteins. It removes a water molecule from the amino acids involved in the creation of the peptide bond and forms a suitable leaving group.
Learn more about amide here-
https://brainly.com/question/13264957
#SPJ4
Normal saline solution (the kind you receive intravenously for medical purposes) is made by dissolving 9.0 g of sodium chloride in water and diluting it to 1000. mL. What is the sodium concentration in normal saline solution in mM?
The sodium concentration in normal saline solution in mM is 154.1 millimoles.
What is molarity?
Molarity (M) is calculated by dividing the volume of the solution (V) in liters by the number of moles of solute (n). Not moles of solute per liter of solvent, but rather moles of solute per liter of solution, is an important distinction to remember when defining molarity.
Molarity = no of moles /volume in liter
[tex]Number of moles = given weight /molecular weight[/tex]
1000 ml = 1 liter
Molarity = (9/58.4)/ 1
=0.1541M = 154.1 mM
Number of moles = 0.1541
= 154.1 millimoles
Therefore, the sodium concentration in normal saline solution in mM is 154.1 millimoles.
To learn more about molarity from the given link.
https://brainly.com/question/26873446
#SPJ1
You heat 1.237 g of a mixture of Fe3O4 and FeO to form 7.237 g Fe2O3. The mass of oxygen reacted is.
The two main postulates that was given by Antoine Lavoisier are, oxygen play an important role in combustion and the other is mass of the reactant and product is conserved. Therefore the mass of oxygen reacted is 6gram.
What is law of conservation of mass?According to Law of conservation of mass, mass can neither be created nor be destroyed. Mass can only be transformed from one form to another. The law of conservation of mass was given by Antoine Lavoisier. Every reaction in nature follow the law given by Antoine Lavoisier that is mass is always conserved.
Fe[tex]_3[/tex]O[tex]_4[/tex]+ FeO +oxygen [tex]\rightarrow[/tex] Fe[tex]_2[/tex]O[tex]_3[/tex]
Mass of Fe[tex]_3[/tex]O[tex]_4[/tex]+ FeO =1.237 Grams
Mass of Fe[tex]_2[/tex]O[tex]_3[/tex]= 7.237 grams
According to law of conservation f mass
Mass of Fe[tex]_3[/tex]O[tex]_4[/tex]+ FeO + mass of oxygen = Mass of Fe[tex]_2[/tex]O[tex]_3[/tex]
Substituting the values we get
1.237+ mass of oxygen = 7.237
mass of oxygen =6gram
Therefore the mass of oxygen reacted is 6gram.
To know more about law of conservation of mass, here:
https://brainly.com/question/28711001
#SPJ1