Butane gas (C4H10) burns in oxygen gas to produce carbon dioxide gas and water vapor. Balance the equation for this reaction (in the lowest multiple integers).What are the formulas for the reactants and products?

Explanation:

We are given: volume = 2.55L

At STP: Temperature = 273.15 K

: Pressure = 1 atm

: R = 0.08205 L.atm/mol.K

Using the ideal gas law:

Answer:

n = 0.11 mol

nswer

Explanation

An exothermic reaction is a type of chemical reaction that gives off heat to its surroundings. In an exothermic reaction, energy is released because the total energy of the products is less than the total energy of the reactants.

Answer:An exothermic Chemical Reaction

Explanation:

Mussorgsky dedicated his work Pictures at an Exhibition to a friend, the painter Vladimir Hartmann, who had passed away at the age of 39 at the height of his fame.

Mussorgsky through his music, and Hartmann through his images. The Academy of Fine Arts in St. Petersburg organized an exhibition of Hartmann's artwork in 1874. After visiting the exhibit, Mussorgsky was moved to write his piano piece.

Mussorgsky dedicated his work Pictures at an Exhibition to a friend, the painter Vladimir Hartmann, who had passed away at the age of 39 at the height of his fame. The composer and the larger Moscow artistic community were profoundly affected by the loss of both a close friend and an artistic inspiration.

The design of Hartmann's massive, imposing gate, which was intended to honor the fact that Tzar (king) Alexander the II had survived an attempted assassination, served as the inspiration for the Great Gate of Kiev.

Therefore, the correct answer is option C. It complimented Hartmann's work.

To learn more about Hartmann's work refer to:

brainly.com/question/696960

#SPJ4

Based on the given question about an atom of Calcium and losing electrons, the charge on the ion that forms would be 18.

This refers to the subatomic particle that is positively charged and can be found in the nucleus of every atom.

Calculations and Parameters

Given that:

Ca^2+ represents an ion with 20 protons and 18 electrons.

A calcium atom has 20 protons and 20 electrons.

The 2+ charge close to the symbol shows a loss of two electrons: 20-2=18.

With this in mind, the charge on the ion that forms would be 18.

Read more about protons and electrons here:

https://brainly.com/question/6258301

#SPJ1

help me i don't know

explain me hahaha

The final concentration of the solution is 0.13 M,

The term dilution has to do with a reduction in the concentration of a solution. We ought to note that the term concentration has to do with the amount of substance that we can find in a solution. There are several units that we could use in the measurement of the concentration of a solution and these include;

Now we are required to be able to obtain the concentration of the solution of the copper I ion that can be found in the flask that has only 100mL. Let us recall that the original solution had only 5 mL of it removed.

Given that;

C1V1 = C2V2

C1 = initial concentration

C2 = Final concentration

V1 = initial volume

V2 = final volume

C2 = C1V1/V2

C2 = 2.63M  * 5.0mL/100 mL

C2 = 0.13 M

Learn more about dilution formula:https://brainly.com/question/7208546

#SPJ1

The complete ionic and net ionic forms of the following equation.

ionic equation :

Mn²⁺  +  2Cl²⁻  +  2NH₄⁺  +  CO₃²⁻   ----->   MnCO₃   +  2NH₄⁺ +  2Cl⁻

net ionic equation :

Mn²⁺(aq)   +   CO₃²⁻(aq)   ---->    MnCO₃(s)

according to question :

MnCl₂    +   (NH₄)₂CO₃   ----> MnCO₃     +    NH₄Cl

balanced molecular equation : with states

MnCl₂(aq)    +   (NH₄)₂CO₃(aq   ----> MnCO₃(s)     +    2NH₄Cl(aq)

the complete ionic equation as follows :

Mn²⁺  +  2Cl²⁻  +  2NH₄⁺  +  CO₃²⁻   ----->   MnCO₃   +  2NH₄⁺ +  2Cl⁻

Now cancel out the spectator ions on both side of equation , the reactant and the product, we get

Mn²⁺(aq)   +   CO₃²⁻(aq)   ---->    MnCO₃(s)

now, the complete net ionic equation is

Mn²⁺(aq)   +   CO₃²⁻(aq)   ---->    MnCO₃(s)

Thus, The complete ionic and net ionic forms of the following equation.

ionic equation :

Mn²⁺  +  2Cl²⁻  +  2NH₄⁺  +  CO₃²⁻   ----->   MnCO₃   +  2NH₄⁺ +  2Cl⁻

net ionic equation :

Mn²⁺(aq)   +   CO₃²⁻(aq)   ---->    MnCO₃(s)

To learn more about ionic and net ionic equation here

https://brainly.com/question/15466794

#SPJ1

The theoretical yield of aluminum iodide according to the reaction would be 276.5 grams.

We are looking to get the theoretical yield of aluminum iodide. This can be achieved by first getting the balanced equation of the reaction:

[tex]2Al + 3I_2 --- > 2AlI_3[/tex]

The mole ratio of Al that reacts and the [tex]AlI_3[/tex] that is produced is 1:1.

Recall that: mole = mass/molar mass.

18.3 grams of aluminum completely reacts:

Molar weight of aluminum = 26.98 g/mol

Mole of 18.3 g aluminum = 18.3/26.98

                                         = 0.6782 mole

Since the mole ratio of Al and  [tex]AlI_3[/tex] is 1:1, the equivalent mole of  [tex]AlI_3[/tex] will also be 0.6782 mole.

Recall that: mass = mole x molar mass

Molar mass of [tex]AlI_3[/tex] = 407.695 g/mol

Mass of 0.6782 [tex]AlI_3[/tex] = 0.6782 x 407.695

                                 = 276.5 grams

In other words, the theoretical yield of  [tex]AlI_3[/tex] according to the reaction is 276.5 grams.

More on theoretical yield can be found here: https://brainly.com/question/14966377

#SPJ1

Answer: 1.4 mol A2B is produced.  

Explanation:  2A + B = A2B, so there are 2 moles of A to every one mole of B.  

So if 2.8 mol of A is present 1/2 that amount is made in A2B (and there will be extra B left over because A is the limiting reactant and you can't make more product than the least amount of reactant allows.  

So 1.4 mole of A2B will be produced.  

suppose you need to calibrate a calorimeter. you burn 0.744 g of a fuel with an enthalpy of combustion of -48.7 kJ/g. if the temperature of water in the calorimeter increases by 106 °C during the reaction . the heat capacity of the calorimeter is 3.417 kJ/ °C.

Heat capacity equation is given by :

q = c ΔT

given that :

change in temperature ΔT = 106 °C

now, q = 0.744 g × ΔH

            = 0.744 g × 48.7 kJ/g

        q = 36.23 kJ

putting the value in formula :

q = c ΔT

c = q /ΔT

c = 36.23 kJ / 10.6  °C

c = 3.417 kJ/  °C

Thus, suppose you need to calibrate a calorimeter. you burn 0.744 g of a fuel with an enthalpy of combustion of -48.7 kJ/g. if the temperature of water in the calorimeter increases by 106 °C during the reaction . the heat capacity of the calorimeter is 3.417 kJ/ °C.

To learn more about heat capacity here

https://brainly.com/question/13607072

#SPJ1

Daniel’s field of study is related to science, and Sanya’s field of study is related to the study of Earth and Space

This is further explained below.

Generally, According to the information that was provided, the researcher named Daniel was doing research on the impact that tropical storms have on the erosion of coastal areas.

These types of research are under the umbrella of the Earth and Space Studies discipline.

Earth, due to the fact that coastal erosions are a part of the study, and Space, due to the fact that storms, which are something that is connected to space, are studied.

When it comes to Sanya, it is quite evident that the emphasis of her research is on the discharges from the industrial facility that have an influence on the freshwater marshes. To be more specific, she is looking into the pH concentration, which is a topic covered in chemistry.

This demonstrates that Daniel majors in Earth and Space Sciences whereas Sanya focuses on Chemistry.

Read more about the field of study

https://brainly.com/question/27537199

#SPJ1

Answer and Explanation: A molecule consisting of central atom with three bond pairs and one lone pair of electrons will have trigonal pyramidal shape.

The binding energy of a mole of nuclei with a mass defect of 0.00084kg/mol is 7.56 x 10¹³ J/mol (option B).

Binding energy is the energy needed to separate the constituent parts of an atom or nucleus; equivalent to the mass defect.

The binding energy of a nucleus can be calculated as follows:

Binding Energy = mass defect x c²

where;

According to this question, a nuclei with a mass defect of 0.00084kg/mol is given. The binding energy can be calculated as follows:

Binding energy = 0.00084 kg/mol × (2.9979 x 10⁸ )²

= 8.94e16 × 8.4 × 10-⁴

= 7.51 × 10¹³J

Therefore, 7.51 × 10¹³J/mol is the binding energy of the nuclei.

Learn more about binding energy at: https://brainly.com/question/16705705

#SPJ1

The electronic configuration of Bromine is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁵.

The electronic configuration of an element refers to the arrangement of electrons in orbitals around the nucleus of an atom of the element.

Electrons in an atom are arranged in orbitals and are fed into the orbitals based on the energy level of the electrons.

The orbitals in which electrons in an atom are placed include:

s-orbital - can take up to 2 electrons

p-orbitals - can take up to six electrons

d-orbital - can take up to 10 electrons

f-orbitals - can take up to 4 electrons

The atomic number of an element determines the electronic configuration of an element.

The atomic number of Bromine is 35.

Learn more about electronic configuration at: https://brainly.com/question/21977349

#SPJ1

Answer: A mole of Aluminium Sulphate contains 12 moles of Oxygen

So

12

1

​

×0.24

Moles of Aluminium Sulphate contains 0.24 moles of Oxygen

So 2×10

−2

Moles is the answer

Explanation:

The balanced molecular chemical equation for the reaction in an aqueous solution for ammonium sulfate and iron(II) chloride is

[tex]2AlCl_3(aq) + 3Na_2S(aq) = Al2S_3(aq) + 6NaCl(aq)[/tex]

This is further explained below.

Generally, Equations are a way to depict chemical processes by using chemical formulas and symbols, and these equations may be found online.

In a chemical equation, the reactants are indicated on the left-hand side of the equation, while the products are shown on the right-hand side.

Generally, the Chemical equation is mathematically given as

AlCl_3 + Na_2S ---> Al2S3 + NaCl.

Hence we balance as

[tex]2AlCl_3 + 3Na2_S = Al2S_3 + 6NaCl,[/tex]

After that, we bring in the states. Because the reaction is taking place in an aqueous solution, we need to inject (aq)

[tex]2AlCl_3(aq) + 3Na_2S(aq) = Al2S_3(aq) + 6NaCl(aq)[/tex]

Thus our required After that, we bring in the states. Because the reaction is taking place in an aqueous solution, we need to inject (aq)is

[tex]2AlCl_3(aq) + 3Na_2S(aq) = Al2S_3(aq) + 6NaCl(aq)[/tex]

Read more about chemical equations

https://brainly.com/question/28294176

#SPJ1

I'm not able to help you with your question

ω

The molarity of 245.0 g of H₂SO4 dissolved in 1.00 L of solution is 2.498M. the molarity of 5.00 g of NaOH in 750.0 mL of solution is 0.167M.

A chemical species' concentration in a solution, specifically the amount of a solute per unit volume of solution, is measured by its molar concentration.

The number of moles per liter when denoted by the unit symbol mol/L or mol/dm3 in SI units, is the mostly used unit used for denoting molarity in chemistry. The secret to determining molarity is to keep in mind that it is measured in moles per liter (M).

MV = grams / molar mass

(x)*(1.000 L) = (245.0 g) / (98.0768 g mol¯1)

x = 2.49804235 M

So, calculating it to 4 significant figures, x = 2.498 M

For 2nd question

Applying the same formula, MV = grams / molar mass

(x) (0.7500 L) = 5.00 g / 39.9969 g mol¯1

(x) (0.7500 L) = 0.1250097 mol

x = 0.1666796 M

x = 0.167 M (when calculated to three Significant figures)

For 3rd question,

using variation of the same formula,

0.200 M = x / 0.1000 L

x = 0.0200 mol

For the 4th question,

MV = moles of solute

no of moles x = (0.415 mol L¯1) (0.01600 L)

To know more about Molarity, visit:

https://brainly.com/question/19517011

#SPJ13

From the specific heat capacity of mercury, the amount of heat energy required to raise the temperature of 4.0 g of mercury metal from 9.3 °C to 83.0 °C is 77.792 J.

The specific heat capacity of a substance is the amount of heat required to raise the temperature of a unit mass of the substance by one degree Celsius or kelvin.

The specific heat capacity of a substance is a constant that can be used to calculate the amount of heat required to raise the temperature of a given mass of a substance to any temperature.

The specific heat capacity of mercury is 0.140 J/g/k.

The formula for calculating specific heat capacity is given below:

Specific heat capacity, c = Δq/mΔT

where;

Δq = heat change

m = mass of the substance

ΔT = temperature change

The Heat required, Δq, will then be:

Δq = m * c * ΔT

Heat required, Δq = 4.0 * 0.140 * (83.0 - 9.3)

Heat required, Δq = 77.792 J

Lear more about specific heat capacity at: https://brainly.com/question/26866234

#SPJ1

B. The development of a shopping center along the riverbank is  the following human activities would result in the most impact on the flow of water in a river

By building dams to store water and by taking water for household, commercial, and agricultural uses, humans actively alter the dynamics of the water cycle. Water demand and supply are expected to be even more impacted by climate change.

Human development, including population increase, reliance on fossil fuels, urbanisation, intercontinental trade, and industrial and agricultural emissions, is typically the cause of environmental changes in rivers.

Acid rain allows nitrous oxide and sulphur dioxide from industries and power plants to infiltrate river systems. In certain places, sewage and wastewater are dumped into rivers. All creatures, from algae to vertebrates, are impacted by pollution when the pH of the water is lowered. As pH falls, biodiversity declines.

learn more about human activities refer

https://brainly.com/question/25213840

#SPJ9

Answer:

Explanation:

was up yo boi

The question requires us to calculate the molarity (or molar concentration) of a HNO3 solution, given the volume and concentration of a KOH solution used to neutralize a given volume of the acid.

The following information was provided by the question:

molarity of KOH solution = M(KOH) = 0.01 M = 0.01 mol/L

volume of KOH solution = V(KOH) = 49.90 mL

volume of HNO3 solution = V(HNO3) = 20.00 mL

To answer this question, we need to take a look at the neutralization reaction between HNO3 and KOH:

HNO3 + KOH -> KNO3 + H2O

From the reaction, we have that 1 mol of HNO3 is necessary to neutralize 1 mol of KOH. With this information, we can write that, to achieve complete neutralization:

number of moles of HNO3 = number of moles of KOH

Since the molarity of a solution is given by the following equation:

We can rearrange it to:

And we can also write the equality between the number of moles of HNO3 and KOH as:

And, since the concentration of KOH was provided, as well as the volumes of HNO3 and KOH necessary to achieve neutralization, we can apply these values to calculate the molarity of HNO3 using the equation above:

Therefore, the molarity of the nitric acid solution is equal to 0.02495 mol/L.

If 200 g of [tex]KClO_3[/tex] decomposes to produce 135 g of KCl, the amount of oxygen produced should be 65 g.

In every decomposition reaction, the mass of the original substance must be equivalent to the sum of the masses of the products of decomposition.

This is known as the law of mass conservation. If a difference exists between the mass of the decomposing substance and the sum of the masses of the products of its decomposition, then the law of conservation of mass has not been obeyed.

Thus, in the reaction:

[tex]KClO_3 (s) --- > KClO (s) + O_2 (g)[/tex]

Mass of  [tex]KClO_3[/tex] = 200 g

Mass of KClO = 135 g

Mass of  [tex]KClO_3[/tex] = mass of KClO + mass of [tex]O_2[/tex]

Mass of  [tex]O_2[/tex] = mass of [tex]KClO_3[/tex] - mass of KClO

                   = 200 - 135

                      = 65 g

Hence, the mass of  [tex]O_2[/tex] produced will be 65 g.

More on the law of conservation of mass can be found here: https://brainly.com/question/13383562

#SPJ1

Answer:

There would be 4 atoms in a tetrahedral molecule.

Explanation:

Answer: 4 atoms

Explanation:

We have the following balanced equation:

They also give us the heat of reaction equal to -764 kJ, i.e. it is an exothermic reaction.

By observing the reaction, we can deduce that for this heat to be generated, one mole of methanol is needed. Now let's see how many grams that mole of methanol equals. We will use the molecular weight equal to 32.04 g/mol

Now we know the grams of methanol that generate 764 kJ, because the heat of reaction is directly proportional to the mass of the reactants, we can apply a rule of three to know the grams needed to produce a heat of reaction equal to 701 kJ:

So, 29.4 g of methanol must be found to produce 701 kJ of heat

The above exercise is designed to help the students understand how living things and non-living things are classified. See the solution for this below.

The items are classified as follows:

Food:

Sports Items:

Furniture:

It is to be noted that The science of living beings or even anything requires classification. It is necessary for understanding the many types of organisms and things. It aids in the identification of different species. It is beneficial to understand the genesis and evolution of organisms.

Learn more about Classification:

https://brainly.com/question/385616

#SPJ1

Full Question:

In the exercises that follow, arrange the items listed into different groups. Give each group a title indicating what the members of that group have in common.

Steak, football, sausage, chair, table, bacon, sofa, baseball bat, cleats, ham, bookcase

The heat is released in the formation of 75.0 g of water is 14.78 kJ.

Chemical equation is defined as a chemical reactions are represented symbolically in which the reactants and products are expressed in terms of their respective chemical formulae.

There are basically five types of chemical equation.

SiO2 (s) + 4KF(g) --> SiF4(g)+ 2H2O(l)

According to the reaction

ΔH = -184 / 2 moles of water

N(water) = Q / ΔH

N(water) = 75 / - 184 / 2 moles of water

N(water) = 0.82 mole

M(water) = 18.02 g/mole

M(water) = N(water) = 0.82 x 18.02 g/mole

                                 = 14.78 kJ

Thus, the heat is released in the formation of 75.0 g of water is 14.78 kJ.

To learn more about chemical equation, refer to the link below:

https://brainly.com/question/28294176

#SPJ1

Answer: Bro you can use Bartleby for this answer

Explanation:

A gas sample is prepared by mixing 15.0 g Cl₂ (70.90 g/mol) with 15.0 g Cl₂ (159.8 g/mol) to a total pressure of 862 mmHg . The partial pressure in mm Hg of Br₂ in the mixture is 262.91 mmHg.

Dalton's law of partial pressures :

The mole fraction of gas × total pressure = partial pressure

mass of Cl₂ = 15.0 g

molar mass = 70.90 g/mol

no. of moles = mass / molar mass

                    = 15.0 g / 70.90 g/mol

                    = 0.211 mol

mass of Br₂ = 15.0 g

molar molar = 159.8 g/mol

no. of moles = mass / molar mass

                    = 15.0 / 159.8 g/mol

                    = 0.093 mol

Total moles = 0.211 mol + 0.093 mol

                    = 0.304 moles

Mole fraction of Br₂ = no. of moles of Br₂ / total moles

                                 = 0.093 / 0.304

                                 = 0.305

Total pressure = 862 mmHg

now putting the values in formula :

partial pressure of  Br₂ = mole fraction of Br₂ × total pressure

                                      = 0.305 × 862 mm Hg

                                      = 262.91 mm Hg

Thus, A gas sample is prepared by mixing 15.0 g Cl₂ (70.90 g/mol) with 15.0 g Cl₂ (159.8 g/mol) to a total pressure of 862 mmHg . The partial pressure in mm Hg of Br₂ in the mixture is 262.91 mmHg.

T o learn more about partial pressure here

https://brainly.com/question/27706523

#SPJ1