Calculate V1 and V2 ( V = voltage )
Given that Vs = 16V, R1 = 330Ω, and R2 = 470Ω
Please do not answer if you don't know how to do this

Answer:

apply more energy to the object with more mass

Explanation:

Answer:

n = 4 x 10¹⁸ photons

Explanation:

First, we will calculate the energy of one photon in the radiation:

[tex]E = \frac{hc}{\lambda}\\\\[/tex]

where,

E = Energy of one photon = ?

h = Plank's Constant = 6.625 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength of radiation = 567 nm = 5.67 x 10⁻⁷ m

Therefore,

[tex]E = \frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{5.67\ x\ 10^{-7}\ m}[/tex]

E = 3.505 x 10⁻¹⁹ J

Now, the number of photons to make up the total energy can be calculated as follows:

[tex]Total\ Energy = nE\\1.4\ J = n(3.505\ x\ 10^{-19}\ J)\\n = \frac{1.4\ J}{3.505\ x\ 10^{-19}\ J}\\[/tex]

n = 4 x 10¹⁸ photons

Answer:

Current = 0.063 Amperes

Explanation:

Let the three resistors be R1, R2, and R3 respectively.

Given the following data;

R1 = 25.0Ω,

R2 = 30.0Ω

R3 = 40.0Ω

Voltage = 6 Volts

First of all, we would determine the equivalent or total resistance;

Total resistance (in series) = R1 + R2 + R3

Total resistance = 25.0Ω + 30.0Ω + 40.0Ω

Total resistance = 95 Ω

Next, we find the current flowing through the circuit;

Voltage = current * resistance

Substituting into the formula, we have;

6 = current * 95

Current = 6/95

Current = 0.063 Amperes

Answer:

F = 4117.64

Explanation:

First, we will calculate the acceleration of the hand, by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration = ?

s = distance covered = compression = 8.5 cm = 0.085 m

vf = final speed = 0 m/s

vi = iniial speed = 10 m/s

Therefore,

[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]

negative sign hows deceleration.

Now, we will calculate the force exerted by the hand:

[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]

F = 4117.64 N

Answer:

b and d :)

Explanation:

Answer:

A, B, And C,

Explanation:

The law of conservation of energy is a physical law that states energy cannot be created or destroyed but may be changed from one form to another. Another way of stating this law of chemistry is to say the total energy of an isolated system remains constant or is conserved within a given frame of reference.

Answer:

50 newtons of kenetic energy?? im guessing ngl

Explanation:

She is probably suffering from a major depression. Depression results in emotional change and loss of interest in previously appreciated activities.

Depression is a frequent and significant medical ailment that has an adverse effect on how you feel, think, and act. It can cause a number of mental and physical difficulties, as well as a loss in your ability.

According to epidemiological research, a hereditary element is involved in 30% to 40% of instances of bipolar illness. As a result, environmental influences have a larger role in the development of depression.

Maria's mother was deported 6 months ago, and she is staying with a cousin. She has to share a room with 3 other children and is very discouraged.

She has little energy to do much of anything, and she cries a lot, she is probably suffering from a major depression.]

Hence, option A is correct.

To learn more about the depression, refer to the link;

https://brainly.com/question/9790235

#SPJ2

Explanation:

full moon

Answer:

2.334‬ kV

Explanation:

Since the electric field strength Ecosθ = -ΔV/Δx = -(V₂ - V₁)/(x₂ - x₁)

where V₁ = potential at x₁ = 966 V, x₁ = 4.59 m, V₂ = potential at x₂ = unknown, x₂ = 1.61 m and θ = angle between E and the x - axis.

Given that E = + 449 N/C and since it is directed parallel to the positive x - axis, θ = 0°

So,

Ecosθ = -ΔV/Δx

Ecos0° = -ΔV/Δx

E = -ΔV/Δx

E = -(V₂ - V₁)/(x₂ - x₁)

making V₂ subject of the formula, we have

-E(x₂ - x₁) = V₂ - V₁

-E(x₂ - x₁) + V₁ = V₂

V₂ = V₁ - E(x₂ - x₁)

Substituting the values of the variables into the equation, we have

V₂ = V₁ - E(x₂ - x₁)

V₂ = 966 V - 449 N/C(1.61 m - 4.59 m)

V₂ = 966 V - 449 N/C(-2.98 m)

V₂ = 966 V + 1,338.02‬ Nm/C

V₂ = 966 V + 1,338.02‬ V

V₂ = ‭2,334.02‬ V

V₂ ≅ ‭2,334‬ V

V₂ = ‭2.334‬ kV

Answer:

v = four-thirds pi 12 cubed.

Explanation:

A ball has a spherical shape. The volume of a spherical shape can be calculated using the following formula:

[tex]V = \frac{4}{3} \pi r^3[/tex]

where,

V = Volume of Ball = ?

d = diameter of the ball = length across the ball = 24 cm

r = radius of ball = d/2 = 24 cm/2 = 12 cm

Therefore,

[tex]V = \frac{4}{3}\pi (12)^3[/tex]

Hence, the correct answer is:

v = four-thirds pi 12 cubed.

Answer:

Scenario 1 will cause the sound of the drumstick hitting the metal bar to reach your ears in the least amount of time.

Explanation:

The sound wave will travel faster in the metal bar than through the air because the speed of sound waves in solids is faster than it is in gases.

Answer:

Scenario 1 will cause the sound of the drumstick hitting the metal bar to reach your ears in the least amount of time.

Explanation:

ifunny is dankreloaded

Answer:Electrical conduction is the transfer of electrically charged particles through a medium, such as electricity traveling through the power lines in your house. Sound conduction (or acoustic conduction) is the transfer of sound waves through a medium, such as vibrations from loud music passing through a wall.

Explanation: Trust

Explanation:

The force on the passenger will be F = ma

Here, m does not change, but a is the variable.

If the cars slows down very fast, the acceleration will be higher, and thus the force will be higher.

If the acceleration is lower, the force will be lower as well, which would be the most desirable scenario for the passenger.

Answer:

t = 3 minutes

Explanation:

Given that,

Power of fan, P = 50 W

Energy used, E = 1 kWh

We know that,

Energy = Power/time

As, 50 watts = 0.05 kilowatts

So,

[tex]t=\dfrac{P}{E}\\\\t=\dfrac{0.05\ kW}{1\ kWh}\\\\t=0.05\ h[/tex]

or

t = 3 min

So, the required time is equal to 3 minutes.

Answer:

Explanation:

The answer is A. First of all, due to the First Law of Thermodynamics, energy cannot be created or destroyed, it only changes form. That being said, it is impossible for the PE and the KE to both increase or decrease at the same time. The second one starts decreasing, the other starts increasing at the exact same rate. PE exists or is at its highest when an object has the potential to fall to a point lower than it is, and it is at this point where Kinetic energy is the lowest. If this block is kicked UP a ramp, which is odd but there you have it, the potential energy increases as it gets higher off the ground. Because of gravity, and assuming that once the block is kicked, the foot that kicked it is no longer important to it (meaning it's not being pushed up, it's just kicked once and that's it) and it will slow down very quickly. KE exists where there is a great amount of velocity.

The answer is A.

Answer:

5 m/s

Explanation:

Mass of the boy + scooter system =  35 kg

Kinetic Energy =  437.6 J

437.6 = [tex]\frac{1}{2} 35 {v}^2[/tex]

25.0057143 = [tex]v^{2}[/tex]

v = 5 m/s

Answer:

1299N

Explanation:

GIven data

Weight W= 1500N

Angle Ф= 30°

The applied force up the frictionless ramp is gotten by applying the formula below

F= WcosФ

substitute

F=1500 cos 30

F = 1500*0.8660

F= 1299N

Hence the applied force is 1299N

Answer:

answer=1.97×10^8

Explanation:

will u mark me brainliest?

Green light (520 nm) enters glass with n = 1.52, the wavelength of light that enters the glass is 520 nm.

To find the wavelength of light that enters the glass, we can use Snell's Law, which relates the angles and indices of refraction for light passing through a boundary between two mediums:

n₁ × sin(θ₁) = n₂ × sin(θ₂)

In this scenario, we can assume that the angle of incidence is zero degrees (the light is entering the glass perpendicular to the surface). Therefore, sin(θ₁) becomes sin(0) which is 0.

Using Snell's Law, we have:

n₁ × sin(θ₁) = n₂ × sin(θ₂)

1 × 0 = 1.52 × sin(θ₂)

The wavelength of light that enters the glass remains the same as the initial wavelength in air, which is 520 nm (nanometers).

Thus, the wavelength of light that enters the glass is 520 nm.

For more details regarding wavelength, visit:

https://brainly.com/question/31143857

#SPJ5

Answer:

1. True

2. False

3. True

4. True

5. False

Answer:

the final speed of the smaller car is 5.624 m/s

Explanation:

Given;

mass of the small car, m₁ = 200 kg

initial velocity of the small car, u₁ = 3 m/s

mass of the larger car, m₂ = 392 kg

initial velocity of the larger car, u₂ = 6 m/s

final velocity of the larger car, v₂ = 1.6 m/s

let the direction of the larger car be positive

let the direction of the smaller car be negative

Apply the principle of conservation of linear momentum to determine the final speed of the smaller car.

m₁u₁ + m₂u₂ = m₁v₁  +  m₂v₂

200(-3)  +  392(6)  = 200v₁   +  392 x 1.6

-600 + 2352  = 200v₁    +  627.2

1752   =  200v₁     +   627.2

1752  -  627.2     =  200v₁

1124.8  = 200v₁

v₁  =  1124.8/200

v₁ = 5.624 m/s

Therefore, the final speed of the smaller car is 5.624 m/s

Answer:

B.) a wheel and axle and a lever

Explanation:

P.S - The exact question is -

Given - A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance. A man pushes a wheelbarrow.

To find - Which simple machines make up a wheelbarrow?

A.) a pulley and an inclined plane

B.) a wheel and axle and a lever

C.) a pulley and a wheel and axle

D.) a lever and a wedge

Proof -

The correct option is - B.) a wheel and axle and a lever

Wheelbarrows are used to carry more goods from place to place by using minimal force as compared when goods are carried by hand.

With this machine, During hauling people can save time.

Answer:

B.) a wheel and axle and a lever

Explanation:

Answer:

extensions.

Explanation:

Hope this helps

Answer:

extensions i think because sound waves travel through the air and to our ears so its extended  

Explanation:

Answer:

1.12

Explanation:

Acellus

Answer: +1.12

Explanation:

This answer works for Acellus! :)

Answer:

1. Motion

2. Empty space

3. Far apart

4. Independently

5. Random or rapid

6. Collision

7. Kinetic energy

8. Atmospheric

9. 273 Kelvin or 0° Celsius

10. 1 atm, 101.3 kPa or 760 mmHg

Explanation:

In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.

Generally, matter exists in three (3) distinct or classical phases and these are;

I. Gas.

II. Solid.

III. Liquid.

Filling the missing words or texts in the question, we have;

The kinetic theory describes the motion of particles in matter and the forces of attraction between them. The theory assumes that the volume occupied by a gas is mostly empty space, that the particles of gas are relatively far apart, move independently of each other, and are in constant random or rapid motion. The collision between particles are perfectly elastic so that the total kinetic energy remains constant. Gas pressure results from the simultaneous collisions of billions of particles with an object. Barometers are used to measure atmospheric pressure. Standard conditions are defined as a temperature of 273 Kelvin or 0° Celsius and a pressure of 1 atm, 101.3 kPa or 760 mmHg.

Answer:

C

Explanation:

So, lets start off by thinking about what we know is in both cells, and rule out from there.

There are just some basic things you need in eukaryotic cells, those include the following:

Here are jsut a few examples of what can be found in both plant and animal cells, however we can already rule out all of the following except for:

C

Because remember, c talks about the chlorplast, which is not the chlorplasm found in both plant anf animal cells, its just the chloroplast found in plant cells.

Although I gave the asnwer to you. Here are some things that are in plant cells that arent in animal cells:

Animal cells on the other hand, have a few things that plant cells do not as well:

Hope this helps! ;)

Answer:

B

Explanation:

 A Mechanical Advantage is when you use a piece of machinery to help you do work, and it is an easy advantage.