CAN SOMEONE HELP IT WOULD MEAN THE MOST??!!!

Explanation:

Percent errors tells you how big your errors are when you measure something in an experiment. Smaller percent errors mean that you are close to the accepted or real value. For example, a 1% error means that you got very close to the accepted value, while 45% means that you were quite a long way off from the true value.

Answer:

Melting

Explanation:

• A chemical change is a change that can be reversed.

Other chemical changes include;

Answer:

the scientific formula is C2H4O2

Explanation:

The cleavage of the compounds resulted in the fragments with varying stability. The most common fragment of acetic acid is [tex]\rm C_2H_4O_2^+[/tex].

The common fragments in the molecular compound are the species that result in the neutral ions adn electrons with the cleavage of the bonds.

Acetic acid is a weak acid in nature, and is composed of the carbon, hydrogen and oxygen elements.

The cleavage of the species in the acetic acid spectrum resulted are, [tex]\rm [COOH^+],\;[CH_3CO^+],\;[CH_2CO^+],\;[HCO^+],\;[CO^+],\;[CH^3^+][/tex].

The species, with the highest m/z ration, has been the most common fragment of the acetic acid. The m/z ratio of the following species is given in the table attached.

From the table, the highest ratio for the stability has been found with [tex]\rm C_2H_4O_2^+[/tex]. Thus, the most common fragment of acetic acid is [tex]\rm C_2H_4O_2^+[/tex].

Learn more about the most common fragment, here:

https://brainly.com/question/2863516

The mass of ammonia that would be produced is 312.5 g

First, we will write a balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

3H₂(g) + N₂(g) → 2NH₃(g)

This means

3 moles of hydrogen gas reacts with 1 mole of nitrogen gas to produce 2 moles of ammonia.

First, we will determine the number of moles of each reactant present

For Hydrogen (H₂)

Mass = 83.6 g

Molar mass = 2.016 g/mol

Using the formula

[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]

Number of moles of H₂ present = [tex]\frac{83.6}{2.016}[/tex]

∴ Number of moles of H₂ present = 41.468254 moles

For Nitrogen (N₂)

Mass = 257 grams

Molar mass = 28.0134 g/mol

∴ Number of moles of N₂ present = [tex]\frac{257}{28.0134}[/tex]

Number of moles of N₂ present = 9.174181 moles

Since,

3 moles of hydrogen gas reacts with 1 mole of nitrogen gas to produce 2 moles of ammonia

Then,

27.522543 moles of hydrogen gas will react with the 9.174181 moles of nitrogen gas to produce 18.348362 moles of ammonia

∴ 18.348362 moles of ammonia will be produced during the reaction

Now, for the mass of ammonia that would be produced

From the formula

Mass = Number of moles × Molar mass

Molar mass of ammonia = 17.031 g/mol

Mass of ammonia that would be produced = 18.348362 × 17.031

Mass of ammonia that would be produced = 312.49095 g

Mass of ammonia that would be produced ≅ 312.5 g

Hence, the mass of ammonia that would be produced is 312.5 g

Learn more here: https://brainly.com/question/13902065

Answer:

Atom

Explanation:

An atom can absorb or emit one photon when an electron makes a transition from one stationary state, or energy level, to another. Conservation of energy determines the energy of the photon and thus the frequency of the emitted or absorbed light.

Answer:

I think it is

1. energy

2. respiration

Answer:

Atomic mass of Sodium is 22.9897 u. Note that, each element may contain more isotopes, therefore this resulting atomic mass is calculated from naturally-occuring isotopes and their abundance. The unit of measure for mass is the atomic mass unit (amu). One atomic mass unit is equal to 1.66 x 10 -24 grams.

Explanation:

Answer:

Br6Si2

Explanation:

The chemical formula for disilicon hexabromide is Si₂Br₆.

The chemical formula of a compound is a symbolic representation of its chemical composition.

Chemical formulae gives information about the elements that constitute the molecules of a compound and also about the ratio in which the atoms of these elements combine to form such molecules.

Every constituent component in a chemical formula is identified with its chemical symbol, along with the relative number of atoms that make up each element.

Learn more about Chemical formula, here:

https://brainly.com/question/32228478

#SPJ6

Answer:

In Iron (II) oxide, ratio is 1:1

In iron (III) oxide, ratio is 4:2

[tex].[/tex]

In Iron (II) oxide, ratio is 1:1

Iron oxides are very important components in most soils as they have major influence on chemical, physical, and microbial properties of soils. Because of their nanoparticulate size (usually 5-200 nm), iron oxides possess large specific surface area.

Generally, iron oxides are prevalent, widely used as they are inexpensive, and play an imperative role in many biological and geological processes. They are also extensively used by humans, eg, as iron ores in thermite, catalysts, durable pigments.

When iron is exposed to moisture or oxygen, oxidation occurs. During this chemical reaction, iron is converted into iron oxide. The iron oxide typically has a reddish, flaky appearance that becomes progressively worse over time.

Learn more about iron oxide:

https://brainly.com/question/18500540

#SPJ2

Answer:

Oxygen Reacts with Iron to Form Rust is the Correct Answer

Answer:

In fact, a fuel cell coupled with an electric motor is two to three is more efficient than an internal combustion engine running on gasoline.

Explanation:

Because hydrogen has a low volumetric energy density, it is stored onbaord a vehicle as a compressed gas to achieve the driving range of conventional vehicles.

Answer:

4 liters brainliest Idc rn

Explanation:

jk but enjoy kiddos :(

Answer:

4 liters

Explanation:

In order to get the answer you just need to multiply the volume amount by 100.

[tex]0.01 \times 100 = 1[/tex]

0.01HL = 1 L

0.01 4HL = 4L

= 4 liters

Hope this helps.

Answer:

D, took the test

Explanation:

Answer:

D: To show how using a list of examples can strengthen a claim

Hope this helps! <3

Explanation:

Atoms are at their most stable when their outermost energy level is either empty of electrons or filled with electrons. Sodium atoms have 11 electrons. Two of these are in the lowest energy level, eight are in the second energy level and then one electron is in the third energy level.

Any atom is most stable when it’s outermost energy level contains eight electrons.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13981855

#SPJ6

Answer:

$500

Explanation:

G00gle.

Answer:

9

Explanation:

i think i dont know

maybe someone tell me if I'm wrong

Answer:

By using various chemical compounds to lift the stain while being gentle enough to keep fabric intact.

Answer:

The choice that we had decided on doing today factors our future because whatever choice we decide on doing in the present day can impact how our life will play out in the future. ... After all, it is your life, so whatever you chose to do, you have the power to decide and create what you think would be best for you

Explanation:

Answer:

That would be the necleus! I hope this helps you! :)

Answer:

It is reactive because it has to gain an electron to have a full outermost energy level.

Explanation:

Answer:

A

Explanation:

Answer:

C. H:C:H:H

Explanation:

Follow these simple steps to correctly draw a Lewis dot structure: Add up the total number of valence electrons found in the entire compound. Draw the simple structure (skeleton structure) of the compound by connecting everything with single bonds only. Add electrons to all the noncentral atoms. Put any unused electrons on the central atom.

Answer:

(H2O)n

raduim hydroxide

hBr

carbonic acid

Explanation:

Answer:

see explanation

Explanation:

Question

A(n) ACID is a compound that dissolves in water to produce hydrogen ions in solution. A(n) _BASE__ URhydroxide ions. Acids have a SOUR___ taste and bases have a BITTER____ taste. Both acids and bases conduct _ELECTRICITY___ and are _REACTIVE___. A pH of7 ____ is neutral. A pH of 6 is _ACIDIC__ and a pH of 14 is a BASIC__

Answer:

I think it's B or A. Though I believe it is more so B. I think I'm right though.

Explanation:

Answer: The clumps, known as glacier mice, have been found to contain miniature ecosystems

Explanation: Because glaciers are in constant, if slow, motion and are frequently blasted by strong winds.

The clumps, known as glacier mice, have been found to contain miniature ecosystems. And even in freezing temperatures, scientists found, the inhabitants manage to thrive. In high winds glacier mice, which form when clumps of dust and organic debris develop a layer of moss over time, hop across vast sheets of ice.

These included springtails (small insect-like animals), water bears (also known as tardigrades, the only animals known to have survived in space), and roundworms. Globally, glacier mice are rare.

Learn more about glacier mice here: brainly.com/question/22404059

#SPJ2

Answer:

what is this?

Explanation:

write your question

b) unsaturated

Hope this helped you- have a good day bro cya)