Answer:
it Give only one of them a positive or negative charge
Answer:
Rubbing the balloon against hair or wool causes electrons to move from the hair or wool to the balloon. The balloon's negative charges are attracted to the positive charges in the can, and so the can rolls toward the balloon.
To overcome an object's inertia, it must be acted upon by __________. A. Gravity B. Energy C. Force D. Acceleration Please select the best answer from the choices provided. A B C D.
Taking into account the Newton's first Law, the correct answer is option C. To overcome an object's inertia, it must be acted upon by a force.
Newton's First Law, also called the Law of inertia, indicates that "Every body perseveres in its state of rest or of uniform rectilinear motion unless it is forced to change its state by forces impressed on it." This means that for a body to come out of its state of rest or of uniform rectilinear motion, it is necessary for a force to act on it.
In other words, it is not possible for a body to change its initial state (be it rest or motion) unless one or more forces intervene.
Finally, the correct answer is option C. To overcome an object's inertia, it must be acted upon by a force.
Learn more:
https://brainly.com/question/1083492https://brainly.com/question/14113252?referrer=searchResultsAnswer:
C) Force
Explanation:
Please help if you can
Answer:
The answer is B
Explanation:
Because when the both sides aren't balanced one side has to cause motion. (fall down)
A gas in a closed container is heated with 10J of energy, causing the lid of the container to rise 2m with 3N of force. What is the total change in energy of the system
Explanation:
For this problem, use the first law of thermodynamics. The change in energy equals the increase in heat energy minus the work done.
ΔU=Q−W
We are not given a value for work, but we can solve for it using the force and distance. Work is the product of force and displacement.
W=FΔx
W=3N×2m
W=6J
Now that we have the value of work done and the value for heat added, we can solve for the total change in energy.
ΔU=Q−W
ΔU=10J−6J
ΔU=4J
Answer is 4J
i think this may help you very much
An object, moving with a constant velocity, travels 400 m in 25 s. What is its velocity?
v = d/t
= 400/25
= 16 m/s
I'm not sure though
A sled is launched off a cliff 39 m high and lands 74 m away from the base of the cliff. How fast was the sled launched?
The sled was launched with a velocity of 26.24 m/s
We'll begin by calculating the the time taken for the sled to land
Height (h) = 39 m
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?[tex]t = \sqrt{ \frac{2h}{g}} \\ \\t = \sqrt{ \frac{2 \times 39}{9.8}} \\ \\ t = 2.82 \: s \\ \\ [/tex]
Finally, we shall determine the velocity.Time (t) = 2.82 s
Horizontal distance (s) = 74 m
Horizontal velocity (u) =?[tex]u = \frac{s}{t} \\ \\ u= \frac{74}{2.82} \\ \\ u = 26.24 \: m/s \\ \\ [/tex]
Therefore, the sled was launched with a velocity of 26.24 m/s
Learn more: https://brainly.com/question/25808490
As a satellite is accelerated away from the Earth by a rocket, the satellite's mass ⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
increases
remains the same
decreases
The mass of the satellite will remain the same when it is accelerated away from the Earth.
The mass of an object is a scalar quantity. This implies that mass of an object can be completely described with magnitude only.
The mass of every object in the universe is independent of the gravity and will always maintain the same value from place to place.
Thus, we can conclude that, the mass of the satellite will remain the same when it is accelerated away from the Earth.
Learn more about mass and scalar quantities here: https://brainly.com/question/21925479
please help
Which color will a red rose appear to be if only a blue light reached it?
red
white
black
purple
Answer:
Black
Explanation:
Why do you call that flower a "red" rose? Could it be because it appears red in a typical 'wideband' solar or household light? That must mean that when the light of many colors shines on it, the rose absorbs everything except red, and red is the only light left to bounce off of it toward your eyes. If that's the case, and you illuminate it with the light of any single color other than red, then the rose will absorb that light and appear black.
Energy stores in food would be considered what
Answer:
Energy stored in food is consider as carbohydrate,protein,fats,etc.
What is the minimum number of overload units such as heaters, trip coils, or thermal cutouts allowed for a three-phase AC motor's protection
The minimum number of overload units for a three-phase AC motor's protection is THREE (3). It is a polyphase motor.
Three-phase motors are polyphase motors, which can be induction motors or synchronous motors.
A three-phase motor is organized to run on three-phase alternating current (AC) electrical power, which is required for diverse industrial devices that use a lot of electrical energy.
These motors (three-phase motor) are composed of a stator (the outer part), a rotor (rotating part), and the enclosure (the external skeleton).
Learn more about three-phase motors here:
https://brainly.com/question/14329442
Shown below is a parallel circuit of two light bulbs.
(
Bulb 1
Bulb 2
Which statement best describes what will most likely happen if Bulb 1 burns out?
A. Bulb 2 will also burn out.
B. Bulb 2 will blink off and on.
C. Bulb 2 will stay lit, but will be a dimmer light source.
D. Bulb 2 will stay lit and the light source will be stronger.
NG
The characteristics of parallel circuits allow to find the correct answer for the question about what happens when a light bulb is:
D) Bulb 2 will stay lit and the light source will be stronger.
Electrical circuits have two forms and connection:
• Serie. In this case there is only one path through which current can circulate the current.
• Parallel. There are several roads where the current can circulate.
In a parallel circuit, the total current in the circuit is the sum of the current in each branch, the voltage in all branches remains constant.
Let's analyze the claims:
A) False. The bulbs are independent, what happens to one does not affect the other.
B) False. Both bulbs were on, so the second bulb should not be affected.
C) False. When burn a light bulb, there is more current in the other branch, The opposite happens.
D) True. When burn a light bulb there is more current in the other branch and therefore the light bulb 2 can dissipate more power by shining a little brighter.
In conclusion, using the characteristics of parallel circuits we can find that the correct answer for the question about what happens when a light bulb burns out is:
D) Bulb 2 will stay lit and the light source will be stronger.
Learn more about parallel circuits here: brainly.com/question/23088951
Which of the following is a completely elastic collision?
A. a ball rebounds against a wall, reversing its direction, but at only half the speed.
B. Two balls collide, stick to each other, and move together after the collision.
C. Two balls collide and move at a right angle to each other after the collision at a reduced speed.
D. Two balls collide head on, each reversing its direction and traveling at half the speed.
E. A ball with velocity v collides with a ball at rest; after the collision the first ball is at rest and the second ball has velocity v.
I will mark brainliest
Hi there!
Answer E.
For a collision to be completely elastic, there must be NO LOSS in kinetic energy.
We can go through each answer choice:
A. Since the ball rebounds at half the initial speed, there is a loss in kinetic energy. This is NOT an elastic collision.
B. A collision involving sticking is an example of a perfectly INELASTIC collision. This is NOT an elastic collision.
C. A reduced speed indicates that there is a loss of kinetic energy. This is NOT elastic.
D. The balls traveling at half the speed after the collision indicates a loss of kinetic energy, making this collision NOT elastic.
E. This collision indicates an exchange of velocities, characteristic of an elastic collision. We can prove this:
Let:
m = mass of each ball
v = velocity
We have the initial kinetic energy as:
[tex]KE = \frac{1}{2}mv^2 + 0 = \frac{1}{2}mv^2[/tex]
And the final as:
[tex]KE = 0 + \frac{1}{2}mv^2 = \frac{1}{2}mv^2[/tex]
Thus, Kinetic energy is CONSERVED. This collision is ELASTIC.
which distance indicator can be used to measure the most distant objects?
The distance indicator can be used to measure the most distant objects among all indicators stated above is Type Ia supernovae
In the field of Astronomy, there are different kind of distance indicators that can be used to measure the distance objects.
Few among them are :
Cepheids Type Ia supernovae Parallax Main-sequence fittingCepheid variables can be measured up to 18 million light years.
The expansion rate of the universe can also be measured by trying to measure the apparent brightness of the Type Ia supernovae
Parallax means illusory state of an object when viewed from different points
Main sequence fitting makes use of a H-R diagram of the cluster to determine the distance to a stellar cluster.
The distance indicator can be used to measure the most distant objects among all indicators stated above is Type Ia supernovae
Learn more about Astronomy here: https://brainly.com/question/1141458
Explain the function and the difference between figure 1 and 2
Answer:
figure one (step up transformer) helps in increasing the output voltage
figure two (step down transformer) helps in decreasing the output voltage
Part A
As an object moves around, on which quantities does the change in its gravitational potential energy depend? Choose all that
apply.
please help asap!!!!!!!!!!!
8. Placing your vehicle between the pilot/escort vehicle and an oversize/overweight vehicle can be dangerous.A. TrueB. False
Answer:
A because that's the answer
A car that's initially traveling at 10 m/s acceleration uniformly for 4 seconds at a rate of 2 m/s?in a straight line. How far does the car travel during this time?
Answer:
Explanation:
The answer is -2m/s²
a car is travelig at 20.0 m/s when the driver applies the brakes and comes to a stop. if the car slows down uniformly with an acceleration of -4.20 m/s, about how far does the car travel before coming to a rest
Since acceleration is constant, we can use the formula
v² - u² = 2a ∆x
where v = final velocity, u = initial velocity, a = acceleration, and ∆x = displacement. Then
0² - (20.0 m/s)² = 2 (-4.20 m/s²) ∆x
⇒ ∆x = (20.0 m/s)² / (8.40 m/s²) ≈ 47.6 m
How do you find the input distance
Answer:
The work efficiency formula is efficiency = output / input, and you can multiply the result by 100 to get work efficiency as a percentage. This is used across different methods of measuring energy and work, whether it's energy production or machine efficiency.
Explanation:
what 3 things make up a nucleotid
Answer:
A nucleotide consists of a sugar molecule (either ribose in RNA or deoxyribose in DNA) attached to a phosphate group and a nitrogen-containing base. The bases used in DNA are adenine (A), cytosine (C), guanine (G), and thymine (T).
Imagine that you are going to visit your friend. Before you get there, you decide to stop at the variety store. If you walk 200 m (N) from your home to the store, and then travel 600 m [S] to your friend's house, what is your total displacement?
Answer:
400m
Explanation:
Brainliest? :))
Let your initial displacement from your home to the store be
Dd
>
1 and your displacement from the store to your friend’s house
be Dd
>
2.
Given: Dd
>
1 = 200 m [N]; Dd
>
2 = 600 m [S]
Required: Dd
>
T
Analysis: Dd
>
T 5 Dd
>
1 1 Dd
>
2
Solution: Figure 6 shows the given vectors, with the tip of Dd
>
1
joined to the tail of Dd
>
2. The resultant vector Dd
>
T is drawn in red,
from the tail of Dd
>
1 to the tip of Dd
>
2. The direction of Dd
>
T is [S].
Dd
>
T measures 4 cm in length in Figure 6, so using the scale of
1 cm : 100 m, the actual magnitude of Dd
>
T is 400 m.
Statement: Relative to your starting point at your home, your
total displacement is 400 m [S].
Determine the percent composition of chromium (III) flouride CrF3
(Show your solution)
Answer:
Molar mass of CrF3, Chromium(III) Fluoride is 108.9913096 g/mol
51.9961+18.9984032·3
Mass percentage of the elements in the composition
Element Symbol Atomic Mass Number of Atoms Mass Percent
Chromium Cr 51.9961 1 47.707%
Fluorum F 18.9984032 3 52.294%
Notes on using the Molar Mass Calculator
Chemical formulas are case-sensitive.
Enter subscripts as simple numbers.
The converter uses a simple dot instead of using a midpoint typographic dot (·) in formulas for adduct molecules, such as water of hydration.
Example: type CuSO4.5H2O instead of CuSO₄·5H₂O.
Explanation:
please mark my answer in brainlist plz
. What material does sound move quicker through?
Water
Air
Steel
Answer:
steel
Explanation:
the close molecules in solids allows sound to travel at a faster speed
Sound will move quicker through Steel than in water and air.
Sound: This can be defined as an audible form of energy, that is radiated outward from a source.
⇒ Generally,
Sound wave travels fastest in solid, more than in liquid or gas. This is because the molecules of solid are more closely together.
⇒ From the question above,
Water is a liquid materialAir is a gaseous materialSteel is a solid materialTherefore, sound will move quicker through Steel than in water and air.
Hence: sound will move quicker through Steel than in water and air.
Learn more about sound here: https://brainly.com/question/1199084
plz help
Suppose one of the three students in Guided Example 7.6 stops pushing the car after 6.00 s. In this case the force exerted on the car is 305 N for the first 6.00 s and 215 N for the second 6.00 s.
(a) What is the final momentum of the car?
(b) What is the final speed of the car?
Answer:
520 n is the final momentum of the car and is also the final speed of the car
Explanation:
The final momentum is 250 newton.
What is momentum?Momentum is the result of a particle's mass and velocity. Being a vector quantity, momentum possesses both magnitude and direction. According to Isaac Newton's second equation of motion, the force applied on a particle is equal to the time rate of change of momentum.
According to Newton's second law, if a particle is subjected to a constant force for a specific amount of time, the result of the force and time (referred to as the impulse) is equal to the change in momentum.
On the other hand, a particle's momentum represents the length of time needed for a consistent force to bring it to rest.
Therefore, The final momentum is 250 newton.
To learn more about momentum, refer to the link:
https://brainly.com/question/24030570
#SPJ2
A 1500 kg car travels 50 m north in 20 seconds. What is the magnitude of the average velocity of the car during the 20 second interval?
a. 2.5 m/s
b. 5.0 m/s
c. 6.5 m/s
d. 7.0 m/s
Answer:
a. 2.5 m/s
Explanation:
50 / 20 = 2.5 m/s
If a nonzero net force is acting on an object, then the object is definitely _____.
a. at rest
b. being accelerated
c. moving with a constant velocity
d. losing mass.
An object is definitely being accelerated when a nonzero net force is acting on it: Option B.
A net force refer to the vector sum of all the forces that are acting on an object or physical body. Thus, a net force is a single force that substitutes the effect of all the forces acting on an object or physical body.
According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass.
This ultimately implies that, an object is definitely being accelerated when a nonzero net force is acting on it.
Read more on acceleration here: https://brainly.com/question/1121817
19. A beach ball is rolling in a straight line toward you at a speed of 9 m/sec. Its momentum is 3 kg'm/sec.
What is the mass of the beach ball? moss - 0.33
aroto from 10mle to speed of 14 m/s The mass of the bicycle
The mass of the beach ball is 0.33 kg
From the question,
We are to determine the mass of the beach ball.
Using the formula
ρ = mv
Where ρ is the momentum
m is the mass
and v is the velocity
From the given information,
ρ = 3 kg m/sec
v = 9 m/sec
Putting the parameters into the formula, we get
3 = m × 9
∴ m = 3 ÷ 9
m = 0.33 kg
Hence, the mass of the beach ball is 0.33 kg
Learn more here: https://brainly.com/question/20345538
Force = 30 N. Mass = 5 kg. Calculate Acceleration
Answer:
Explanation:
from F=ma, 30=5a, a=6
A car which is traveling at a velocity of 27 m/s undergoes an acceleration of 5.5 m/s^2 over a distance of 430 m. How fast is it going after that acceleration?
73.9m/s (1dp)
1) list everything that you are given using suvat, where s is distance, u is initial velocity(speed), v is final velocity(speed), a is acceleration and t is time
s = 430m
u = 27 m/s
v = ? (we need to work out)
a = 5.5m/s^2
t = (we are not given this value)
2) use an equation that doesn't involve the time
[tex] {v}^{2} = u {}^{2} + 2as[/tex]
3) input the values that we have
[tex] {v}^{2} = ( {27})^{2} + 2(5.5)(430)[/tex]
[tex]v {}^{2} = 5459[/tex]
[tex]v = \sqrt{5459} = 73.9[/tex]
so the answer is 73.9m/s to 1dp
the federal government sets upper limits for exposure to electromagnetic energy from _____ known as the sar.
The federal government sets upper limits for exposure to electromagnetic energy from telephones known as the SAR.