certain computer program is - designed t0 solve a 3 x 3 grid of digits, ranging from to 9,in 4.0 seconds. The average time to solvc matching puzzle directly proportional to the total number of possible choices Which of the following approximates the average length of time would take the computer to solve similar 4 x 4 grid of numbers ranging from " to 97 (Note: numbers may be repeated in each grid square when solving the puzzle: Assume the computer _ continuously and without interruption ) program runs a.1 year b.10 years c.1day d.1 month

Answers

Answer 1

The correct option is (c) 1 day.

Given that a certain computer program is designed to solve a 3 x 3 grid of digits, ranging from 1 to 9, in 4.0 seconds. The average time to solve matching puzzles is directly proportional to the total number of possible choices. To find the average length of time it would take the computer to solve a similar 4 x 4 grid of numbers ranging from 1 to 97, we need to find the number of possible choices in a 4 x 4 grid, which can be calculated as: Total number of choices = 97 - 1 + 1 = 97Hence, the total number of choices is 97. The number of choices for a 3 x 3 grid is 9. So, the ratio of the total number of choices in 4 x 4 grid to that in 3 x 3 grid is: 97/9 = 10.777 approx.The average length of time taken to solve a 4 x 4 grid will be directly proportional to this ratio. Therefore, the average length of time that would take the computer to solve a similar 4 x 4 grid of numbers ranging from 1 to 97 can be approximated as:4.0 s × 10.777 ≈ 43.1 seconds.

Know more about computer program here:

https://brainly.com/question/14588541

#SPJ11


Related Questions

Which statements accurately describe the Outlook interface? Check all that apply.

Two main elements are items and folders.
The content pane contains a list of items to be viewed in the reading pane.
The ribbon contains a list of tabs and menu items.
Command groups are located in the folder pane.
The main Outlook menu has a ribbon tab with default commands.
File, Home, Send/Receive, Folder, and View are commands on the main ribbon tab.

Answers

Answer:

send receive

Explanation: it gives and takes

Answer:

Explanation: EDGE2021

Whenever you are passing or another vehicle is passing you, _______ is particularly important to avoid collisions. A. Turning. B. Safety. C. Speed. D. Slowing

Answers

Whenever you pass or another vehicle passes you, the thing that is particularly important to avoid collisions is SAFETY.

______ are expanding the possibilities of data displays as many of them allow users to adapt data displays to personal needs.

Answers

Customizable data visualizations are revolutionizing the way data is displayed by empowering users to adapt and tailor visualizations to their personal needs.

Traditional static data displays often present a fixed view of information, limiting the user's ability to explore and derive insights.

In contrast, customizable data displays offer flexibility and interactivity, allowing users to choose specific data variables, adjust parameters, apply filters, and create personalized visual representations.

This adaptability enhances user engagement, promotes deeper understanding of the data, and enables users to uncover meaningful patterns and trends. By putting control in the hands of users, customizable data displays enable more effective data analysis and decision-making.

Read more about Customizable data visualizations here

brainly.com/question/11296162

#SPJ11

1.1 what is the difference between the transactions display current and display at key date?

Answers

In the context of transactions, "Display Current" and "Display at Key Date" refer to different ways of viewing the transaction data.

"Display Current": This option allows you to view the current state of transactions. It shows the most up-to-date information, reflecting the latest changes and updates made to the transactions. It provides real-time data and shows the current values and status of the transactions.

"Display at Key Date": This option allows you to view the transactions as they appeared or were recorded at a specific key date or point in time. It enables you to see the transaction data as it existed at a particular moment in the past. This feature is particularly useful for historical analysis or for auditing purposes, where you may need to examine the state of transactions at a specific date or during a specific period.

In summary, "Display Current" shows the current state of transactions, while "Display at Key Date" shows the transactions as they appeared at a specific date or point in time in the past.

Learn more about Display  here:

https://brainly.com/question/32195413

#SPJ11

question 4 what is the average power drawn out of the input source vg during steady-state operation of the converter (in watts)?

Answers

To determine the average power drawn out of the input source vg during steady-state operation of the converter, we need additional information or context.

The average power drawn out of the input source vg during steady-state operation of a converter depends on various factors, such as the type of converter (e.g., AC-DC, DC-DC), the efficiency of the converter, the load connected to the converter, and the input voltage waveform. These factors affect the power conversion process and determine the power transfer efficiency.

Typically, in steady-state operation, the average power drawn from the input source can be calculated by multiplying the average input voltage (vg) with the average input current. However, without more information about the specific converter and its operating parameters, it is not possible to provide a definitive answer.

To determine the average power drawn out of the input source vg during steady-state operation, it is necessary to consider the converter's specific characteristics and the corresponding load. This information is crucial for accurately calculating the average power transfer and assessing the overall efficiency of the converter system.

Learn more about input source here:

brainly.com/question/29310416

#SPJ11

Which computer databases would you search if you had images of a cartridge casing that had been ejected during a shooting?

Answers

These databases include the National Integrated Ballistic Information Network (NIBIN), eTrace, and IBIS (Integrated Ballistic Identification System).National Integrated Ballistic Information Network (NIBIN)NIBIN is a computerized system used to acquire, store, and compare digital images of firearm-related evidence, including cartridge cases and bullets.

It is a repository for ballistic evidence that has been recovered from crime scenes and firearms-related incidents.

The database is searchable to provide leads in investigations and allows for the linking of ballistic evidence to other crime scenes and incidents. eTraceeTrace is a web-based system that provides firearm tracking capabilities to law enforcement agencies.

It enables law enforcement officials to trace firearms used in the commission of crimes, thereby facilitating investigations.  Integrated Ballistic Identification System (IBIS)The Integrated Ballistic Identification System (IBIS) is a digital network that compares ballistic evidence to generate leads in an investigation.

It is utilized to analyze images of cartridge casings and bullets collected from crime scenes and weapons-related incidents. It enables the sharing of ballistic evidence between law enforcement agencies, allowing for faster identification and tracking of criminals.

To know more about National Integrated Ballistic Information Network visit :-

https://brainly.com/question/31259088

#SPJ11

Answer both parts in SQL
List all of the customers who have never made a payment on the same date as another customer. (57)
Find customers who have ordered the same thing. For instance, if ‘AV Stores, Co.’ orders a particular item five times, and ‘Land of Toys Inc.’ orders that same item 4 times, it only counts as one item that they have ordered in common. Find only those customer pairs who have ordered at least 40 different items in common (3).

Answers

Part 1: List all customers who have never made a payment on the same date as another customer.

SELECT c1.customer_name

FROM customers c1

WHERE NOT EXISTS (

  SELECT *

   FROM payments p1

   JOIN payments p2 ON p1.payment_date = p2.payment_date AND p1.customer_id <> p2.customer_id

   WHERE p1.customer_id = c1.customer_id

)

This query selects all customers from the "customers" table for whom there is no matching payment date with another customer in the "payments" table.

Part 2: Find customer pairs who have ordered at least 40 different items in common.

SELECT o1.customer_name, o2.customer_name

FROM orders o1

JOIN orders o2 ON o1.order_id <> o2.order_id AND o1.item_id = o2.item_id

GROUP BY o1.customer_name, o2.customer_name

HAVING COUNT(DISTINCT o1.item_id) >= 40

This query joins the "orders" table with itself based on the same item being ordered by different customers. It then groups the results by customer pairs and calculates the count of distinct items they have ordered in common. The "HAVING" clause filters the results to only include customer pairs with at least 40 common items.

Learn more about List here:

https://brainly.com/question/32132186

#SPJ11

Select the correct answer.

Which animation do these characteristics
best relate? Allows you to edit, blend, and reposition clips of animation.
This animation is not restricted by time.


1. Interactive Animatino
2. Linear Animation
3. Nonlinear Animation

Answers

Answer:

1. Interactive Animatino

what are the two general hardware instructions that can be performed atomically

Answers

The two general hardware instructions that can be performed atomically are "test and set" and "compare and swap."

In concurrent programming, atomicity refers to the property of an operation being executed as a single, indivisible unit, without any interference from other concurrent operations. The "test and set" instruction is used to atomically test a memory location and set it to a new value. It ensures that no other concurrent process can access or modify the memory location between the test and the set operation.

Similarly, the "compare and swap" instruction compares the value of a memory location with an expected value and swaps it with a new value if the comparison succeeds, all in a single atomic step. These instructions are commonly used in synchronization mechanisms to ensure thread safety and prevent race conditions.

You can learn more about  hardware instructions at

https://brainly.com/question/28494136

#SPJ11

create a two text field web form where one field allows the user to specify the text string to search for and the other field allows the user to specify the replacement string. The page should also show a sentence of your choosing that the search and replace will be perfomed on. Take the in input from the from and using appropriate string functions perform the search and replace on the sentence and retueturn the updated sentence to the user/browser. PHP programming

Answers

A two-text field web form can be created using PHP programming, where one field allows the user to specify the text string to search for, and the other field allows the user to specify the replacement string.

To create a two-text field web form in PHP, you would need to create an HTML form that includes two input fields: one for the search string and the other for the replacement string. Additionally, a submit button should be provided to trigger the search and replace operation.

Once the form is submitted, the PHP code can retrieve the values entered by the user in the input fields. The PHP code can then perform the search and replace operation on a pre-defined sentence using appropriate string functions such as str_replace() or regular expressions. The updated sentence can be stored in a variable.

Finally, the PHP code can generate the updated sentence and display it to the user/browser. This can be achieved by using PHP to echo the updated sentence within an HTML element or by redirecting the user to a new page that displays the updated sentence.

By providing this two-text field web form, users can easily input their desired search string and replacement string, allowing the PHP code to dynamically perform the search and replace operation and provide the updated sentence as the output.

Learn more about PHP here:

brainly.com/question/27750672

#SPJ11

Refer to the exhibit. the exhibit shows a small switched network and the contents of the mac address table of the switch. pc1 has sent a frame addressed to pc3. what will the switch do with the frame?

Answers

In the given exhibit, the small switched network and the contents of the mac address table of the switch are given. PC1 has sent a frame addressed to PC3, and we are required to know what the switch will do with the frame. A switch is a layer 2 device that works at the Data Link layer of the OSI model. It keeps track of the MAC addresses of the devices that are connected to it using the MAC address table. It reads the destination MAC address of a frame and uses the table to forward the frame to the appropriate port. The MAC address table shows that PC3 is connected to port 3, and so the switch will forward the frame to port 3 so that it reaches PC3. Therefore, the switch will forward the frame to the appropriate port (port 3) to reach PC3 as PC3's MAC address is present in the table.

Explanation: The MAC address table in the given exhibit shows that PC3 is connected to port 3 and its MAC address is 00-21-91-62-82-76. When PC1 sends a frame addressed to PC3, the switch reads the destination MAC address of the frame and uses the table to forward the frame to the appropriate port. Since PC3's MAC address is present in the table and is associated with port 3, the switch will forward the frame to port 3 to reach PC3.

Know more about MAC here:

https://brainly.com/question/27960072

#SPJ11

digital signatures should be created using processes and products that are based on the _____.

Answers

Digital signatures should be created using processes and products that are based on cryptographic algorithms.

Digital signatures are a crucial component of secure electronic communication and document verification. They provide a means of ensuring the integrity, authenticity, and non-repudiation of digital documents or messages. To achieve these goals, digital signatures rely on cryptographic algorithms, which form the foundation of the processes and products used to create them.

Cryptographic algorithms are mathematical functions that operate on digital data to provide confidentiality, integrity, and authentication. They involve encryption, decryption, and hashing techniques to protect the confidentiality of information, verify its integrity, and authenticate the parties involved.

When creating digital signatures, cryptographic algorithms are employed to generate a unique digital fingerprint of the document or message. This fingerprint, also known as a hash, is then encrypted using the sender's private key, creating the digital signature. The recipient can then use the sender's public key to decrypt and verify the signature, ensuring the document's integrity and authenticity.

Using cryptographic algorithms in the creation of digital signatures ensures that the signatures are secure, tamper-proof, and resistant to forgery. It is essential to use trusted processes and products that adhere to established cryptographic standards and best practices to maintain the security and reliability of digital signatures.

Learn more about digital signature here:

brainly.com/question/16477361

#SPJ11

Most customers come to ThreadMeister
to buy jackets.

Answers

what about the jacket

What are some of the possible services that a link-layer protocol can offer to the network layer? Which of these link-layer services have corresponding services in IP? In TCP?
Suppose two nodes start to transmit at the same time a packet of length L over a broadcast channel of rate R. Denote the propagation delay between the two nodes as dprop. Will there be a collision if dprop < L /R? Why or why not?
How big is the MAC address space? The IPv4 address space? The IPv6 address space?

Answers

Possible services that a link-layer protocol can offer to the network layer include:

Framing: Dividing the data into manageable frames for transmission.

Error Detection and Correction: Adding error-checking codes to detect and correct transmission errors.

Medium Access Control: Controlling access to the shared transmission medium to avoid collisions.

Addressing: Assigning unique addresses to nodes on the local network.

Reliable Delivery: Ensuring reliable delivery of data by retransmission and acknowledgment.

Flow Control: Managing the rate of data transmission between sender and receiver.

Link Management: Establishing and terminating links, handling link failures, and managing link quality.

Some of these link-layer services have corresponding services in IP and TCP. For example:

Error Detection and Correction: Both IP and TCP have checksum mechanisms for error detection.

Addressing: IP addresses provide network layer addressing, while TCP ports provide transport layer addressing.

Reliable Delivery: TCP provides reliable delivery through mechanisms like sequence numbers, acknowledgments, and retransmissions.

Flow Control: TCP implements flow control mechanisms to regulate the rate of data transmission.

If dprop < L / R, there will not be a collision. The reason is that dprop represents the time it takes for a signal to propagate from one node to another, while L / R represents the time it takes to transmit the entire packet over the channel. If dprop < L / R, it means that the propagation delay is smaller than the transmission time, indicating that the second node will receive the packet after it has been fully transmitted by the first node. Therefore, there won't be a collision.

The MAC address space is 48 bits in size, allowing for 2^48 (approximately 2.8 x 10^14) unique MAC addresses.

The IPv4 address space is 32 bits in size, allowing for 2^32 (approximately 4.3 billion) unique IPv4 addresses.

The IPv6 address space is 128 bits in size, allowing for 2^128 (approximately 3.4 x 10^38) unique IPv6 addresses.

Learn more about link-layer protocol here:

https://brainly.com/question/9871051

#SPJ11

Identify the 19th-20th century art movement that embraced the machine and industrial elements and stemmed from art movements such as Cubism.


A. Arts and Crafts


B. Art Nouveau


C. Art Deco


D. Neoclassical

Answers

The 19th-20th century art movement that embraced the machine and industrial elements and stemmed from art movements such as Cubism is Art Deco. Art Deco is a decorative style that emerged in the 1920s and 1930s as a result of the Art Nouveau and Arts and Crafts movements.

Art Deco is best known for its embrace of modern technology, industrial materials, and geometric shapes.A characteristic feature of the Art Deco style is its geometric shapes and simple designs that have a strong emphasis on symmetry and balance.

Art Deco style is also known for its use of exotic materials such as jade, chrome, and lacquer. It was widely used in architecture, interior design, and product design. Art Deco design style took hold in the United States in the 1920s, with the rise of mass production and technological advances that led to new materials and techniques.

To know more about movement visit:

https://brainly.com/question/11223271

#SPJ11

Advantages of Internet surveys over e-mail surveys include which of the following? Select one: a. Graphs, images, animations, and links to other Web pages may be integrated into or around the survey. b. It is possible to validate responses as they are entered. c. Skip patterns can be programmed and performed automatically. d. Layout can be adjusted to fit questions and answers on the same screen e. All of these answers are correct

Answers

The advantages of Internet surveys over email surveys include the integration of multimedia elements, the ability to validate responses, the use of skip patterns, and flexible layout options. The correct answer is option e: All of these answers are correct.

Internet surveys provide several advantages over email surveys. Firstly, they allow the integration of graphs, images, animations, and links to other web pages, enhancing the survey experience and providing additional information. Secondly, Internet surveys enable real-time validation of responses as they are entered, allowing for immediate feedback or correction. Thirdly, skip patterns can be programmed into the survey, allowing respondents to automatically skip or jump to relevant questions based on their previous answers. Lastly, Internet surveys offer flexible layout options, ensuring questions and answers can fit on the same screen for easier navigation.

Learn more about Internet surveys here:

https://brainly.com/question/32272531

#SPJ11

given a cache with 128 blocks and a block size of 16 bytes, to what block does byte address 1800 mapped to for a direct-mapped cache

Answers

The byte address 1800 is mapped to block number 12 in a direct-mapped cache.

In a direct-mapped cache, memory addresses are divided into three parts: tag, index, and offset. A cache with 128 blocks and a block size of 16 bytes has 8192 bytes of cache (128 x 16 = 2048 bits, 2048 x 8 = 8192 bytes). We can use this information to determine the number of blocks and the block size in bits:128 blocks x 16 bytes/block = 2048 bits per block1800 in binary is 0000000000000111 0011 1000. Because the block size is 16 bytes, the offset is 4 bits (2^4 = 16). The next step is to calculate the number of index bits (also known as block bits).12 bits are required for addressing 128 blocks in binary. Therefore, 4 bits are left for the tag. 0000 is the tag, and 1100 is the index or block number.

Know more about direct-mapped cache here:

https://brainly.com/question/32506236

#SPJ11

what are the things that must be included when using online platform as means of communicating deals,?​

Answers

Answer: Terms of Service or Disclaimer

Explanation:

I need to know the diferences between PAN, LAN, CAN, MAN and WAN.

Answers

Answer:

LAN

The most basic and common type of network, a LAN, or local area network, is a network connecting a group of devices in a “local” area, usually within the same building. These connections are generally powered through the use of Ethernet cables, which have length limitations, as the speed of the connection will degrade beyond a certain length.

A WLAN, or wireless LAN, is a subtype of LAN. It uses WiFi to make the LAN wireless through the use of a wireless router.

HAN

A HAN, or home area network, is a network connecting devices within a home. These networks are a type of LAN. All the devices inside the household, including computers, smartphones, game consoles, televisions, and home assistants that are connected to the router are a part of the HAN.

CAN

A CAN, or campus area network, usually comprises several LANs. They cover a campus, connecting several buildings to the main firewall. A university could use a CAN, as could a corporate headquarters.

MAN

Even larger than a CAN, a MAN is a metropolitan area network. These can cover an area as large as a city, linking multiple LANs through a wired backhaul. An example of a MAN would be a citywide WiFi network.

WAN

In contrast to the smaller LAN and HANs, a WAN is a wide area network, covering any distance necessary. The Internet could be considered a WAN that covers the entire Earth.

Answer:

A personal area network (PAN) is formed when two or more computers or cell phones interconnect to one another wirelessly over a short range, typically less than about 30feet.

A local area network (LAN) is a collection of devices connected together in one physical location, such as a building, office, or home. A LAN can be small or large, ranging from a home network with one user to an enterprise network with thousands of users and devices in an office or school.

A campus network, campus area network, corporate area network or CAN is a computer network made up of an interconnection of local area networks (LANs) within a limited geographical area.

A metropolitan area network (MAN) is a computer network that interconnects users with computer resources in a geographic region of the size of a metropolitan area.

A wide area network (also known as WAN), is a large network of information that is not tied to a single location. WANs can facilitate communication, the sharing of information and much more between devices from around the world through a WAN provider.

Explanation:

explanation on top

During which phase the following activities are identified:Identifying the major modules of the system, how these modules integrate, the architecture of the system and describing pseudocode for each of the identified module?

Answers

The phase during which the following activities are identified - identifying the major modules of the system, how these modules integrate, the architecture of the system, and describing pseudocode for each of the identified modules - is the Design phase of the Software Development Life Cycle (SDLC).

The Design phase is the second phase in the Software Development Life Cycle (SDLC), which follows the Requirement Gathering phase. The design phase typically involves the creation of detailed design documentation, such as the Functional Design Specification (FDS), Technical Design Specification (TDS), and Database Design Specification (DDS).The design phase comprises four main steps:1. Architectural Design2. Detailed Design3. Database Design4. User Interface (UI) DesignIn the Architectural Design phase, the software development team identifies the major modules of the system, how these modules integrate, and the architecture of the system.

In this phase, the software development team also prepares flowcharts and diagrams to describe the system's architecture and the interaction between its components.In the Detailed Design phase, the software development team describes the pseudocode for each of the identified modules. They also create algorithms and prepare a detailed design document.In the Database Design phase, the software development team designs the system's database structure, including tables, fields, and relationships.

To know more about pseudocode visit:

https://brainly.com/question/30942798

#SPJ11

Construct an algorithm to print the first 20 numbers in the Fibonacci series (in mathematics) thanks

Answers

Answer:

0+1=1

1+1=2

1+2=3

2+3=5

3+5=8

5+8=13

Explanation:

// C++ program to print

// first n Fibonacci numbers

#include <bits/stdc++.h>

using namespace std;

 

// Function to print

// first n Fibonacci Numbers

void printFibonacciNumbers(int n)

{

   int f1 = 0, f2 = 1, i;

 

   if (n < 1)

       return;

   cout << f1 << " ";

   for (i = 1; i < n; i++) {

       cout << f2 << " ";

       int next = f1 + f2;

       f1 = f2;

       f2 = next;

   }

}

 

// Driver Code

int main()

{

   printFibonacciNumbers(7);

   return 0;

}

 

You are the IT security administrator for a small corporate network. You need to secure access to your switch, which is still configured with the default settings.
Access the switch management console through Internet Explorer on http://192.168.0.2 with the username cisco and password cisco.
In this lab, your task is to perform the following:
Create a new user account with the following settings:User Name: ITSwitchAdminPassword: Admin$0nly2017 (0 is zero)User Level: Read/Write Management Access (15)
Edit the default user account as follows:Username: ciscoPassword: CLI$0nly2017 (0 is zero)User Level: Read-Only CLI Access (1)
Save the changes to the switch's startup configuration file.

Answers

As an IT security administrator for a small corporate network, securing access to your switch is paramount.

This task is even more critical if the switch is still configured with the default settings. The process for securing access to the switch involves creating a new user account, editing the default user account, and saving the changes to the switch’s startup configuration file. The steps to secure the switch access are outlined below.

1. Create a new user account with the following settings:a. User Name: ITSwitchAdminb. Password: Admin$0nly2017 (0 is zero)c. User Level: Read/Write Management Access (15)To create a new user account, follow the steps below:i. Access the switch management console through Internet Explorer on http://192.168.0.

2 using the default username and password (“cisco”).ii. On the switch management console, go to the ‘User Accounts’ menu and select ‘Add.’iii. Input the new user account details: username (ITSwitchAdmin), password (Admin$0nly2017), and user level (Read/Write Management Access).iv. Save the new user account by clicking the ‘Save’ button.2. Edit the default user account as follows:a. Username: ciscob. Password: CLI$0nly2017 (0 is zero)c. User Level: Read-Only CLI Access (1)To edit the default user account, follow the steps below:i. Access the switch management console through Internet Explorer on http://192.168.0.2 using the default username and password (“cisco”).ii. On the switch management console, go to the ‘User Accounts’ menu and select the default user account (‘cisco’).iii. Edit the default user account details: username (cisco), password (CLI$0nly2017), and user level (Read-Only CLI Access)

.iv. Save the changes to the default user account by clicking the ‘Save’ button.3. Save the changes to the switch’s startup configuration file.To save the changes made to the switch’s user accounts, follow the steps below:i. Access the switch management console through Internet Explorer on http://192.168.0.2 using the default username and password (“cisco”).ii. On the switch management console, go to the ‘Management and Backup’ menu and select ‘Save Configuration.’iii. Save the changes made to the switch’s startup configuration file by clicking the ‘Save’ button.It is crucial to ensure that access to your switch is secure. Creating new user accounts, editing default user accounts, and saving the changes to the switch’s startup configuration file will help secure access to your switch.

Learn more about network :

https://brainly.com/question/31228211

#SPJ11

What is the purpose of this rectangular shape in a flowchart?

Answers

The rectangular shape in a flowchart is used to show a task or a process to be done to proceed the process further.

What is a flowchart?

A flowchart is a diagrammatical representation of a task that is to be conducted and performed in a proper sequence. There are various types of flowcharts shapes, that represent something different for task completion.

The actual purpose of rectangular shape in middle of the flowchart is to instruct the reader or the performer to complete the task or perform the action for the completion of the process.

Learn more about flowchart, here:

https://brainly.com/question/14956301

#SPJ2

A painting company has determined that for every 115 square feet of wall space, one gallon of pain and eight hours of labor will be required. The company charged $18.00 per hour ofr labor. Write a program that allows the user to enter the number of rooms to be painted and the price of the pain per gallon. It should also ask for the squre feet of the wall space of each room. the program should have methods that return the following data:
the number of gallons of paint required
the hours of labor required
the cost of the paint
the labor charges
the total cost of the paint job
then it should display the data on the screen.
S Sample Input (the first 4 lines) and Output (the last line) of the program:
-how many rooms to paint?
-enter the square feet of room1:
-enter the square feet of room2:
-enter the price of the paint per gallon:
-the total estimated cost is:
Notes: Please use the following as a check list to check if your assignment meets all requirements.
1) Name your class, PaintJobEstimator.
2) You should write comments similar to that in AreaRectangle.java with multiple line comment symbols: /**

Answers

Certainly! Here's an example program written in Java that meets the requirements you specified:

import java.util.Scanner;

public class PaintJobEstimator {

   public static void main(String[] args) {

       Scanner input = new Scanner(System.in);

       

       System.out.print("How many rooms to paint? ");

       int numRooms = input.nextInt();

       

       double totalGallons = 0;

       double totalLaborHours = 0;

       double totalPaintCost = 0;

       

       for (int i = 1; i <= numRooms; i++) {

           System.out.print("Enter the square feet of room " + i + ": ");

           double squareFeet = input.nextDouble();

           

           double gallons = calculateGallons(squareFeet);

           double laborHours = calculateLaborHours(squareFeet);

           

           totalGallons += gallons;

           totalLaborHours += laborHours;

           

           System.out.println("Gallons of paint required for room " + i + ": " + gallons);

           System.out.println("Labor hours required for room " + i + ": " + laborHours);

           

           System.out.println();

       }

       

       System.out.print("Enter the price of the paint per gallon: ");

       double paintPrice = input.nextDouble();

       

       totalPaintCost = calculatePaintCost(totalGallons, paintPrice);

       double laborCharges = calculateLaborCharges(totalLaborHours);

       double totalCost = calculateTotalCost(totalPaintCost, laborCharges);

       

       System.out.println("The total estimated cost is: $" + totalCost);

       

       input.close();

   }

   

   public static double calculateGallons(double squareFeet) {

       return squareFeet / 115;

   }

   

   public static double calculateLaborHours(double squareFeet) {

       return squareFeet / 115 * 8;

   }

   

   public static double calculatePaintCost(double gallons, double paintPrice) {

       return gallons * paintPrice;

   }

   

   public static double calculateLaborCharges(double laborHours) {

       return laborHours * 18.00;

   }

   

   public static double calculateTotalCost(double paintCost, double laborCharges) {

       return paintCost + laborCharges;

   }

}

You can run this program, and it will prompt the user for the required information, calculate the necessary values using the provided methods, and display the estimated cost on the screen based on the input.

learn more about Java here

https://brainly.com/question/12978370

#SPJ11

You have just changed the IP address from 172.31.1.10/24 to 172.31.1.110/24 on a computer named computer5 in your domain. You were communicating successfully with this computer from your workstation before you changed the address. Now when you try the command ping computer5 from your workstation, you don't get a successful reply. Other computers on the network aren't having a problem communicating with the computer. Which command might help solve the problem

Answers

Answer: Router

Hope this helps

Using the below code, do the following:
int main (int argc, char** argv) {
printf ("# of arguments passed: %d\n", argc) ;
for (int i=0; i< argc ; i++) { printf ( "argv[%d] = %s\n", i, argv[i] ) ;} return (0) ;}
1) convert any argument that is actually a number, from its string form into an integer using sscanf(). As a small hint, look at the return type of sscanf(), notice that if it makes a match, you get the # of matches it made to your string as a return.
2) store any integer arguments into an array of integers (you may assume we’ll never pass in 10 integers at any time). For the above example (./program3 arg1 2 arg3 4 arg5), your program would generate an array: {2, 4}
3) store any non-integer argument (example: arg1) into 1 large string – separated by spaces, using sprint(). For the above example, your program would generate a string: "program3 arg1 arg3". You may assume a maximum length of 250 for this string.
4) print out the contents of your integer array (a newline after each element) and the contents of your single string.

Answers

Given code: int main (int argc, char** argv) {printf ("# of arguments passed: %d\n", argc) ;for (int i=0; i< argc ; i++) { printf ( "argv[%d] = %s\n", i, argv[i] ) ;} return (0) ;}

1) To convert any argument that is actually a number, from its string form into an integer using sscanf(). If it makes a match, you get the # of matches it made to your string as a return. Here's the implementation in the above code snippet:int num;int numbers[10];int number_index = 0;char non_numbers[250] = "";for(int i = 1; i < argc; i++) {if(sscanf(argv[i], "%d", &num) == 1) {numbers[number_index] = num;number_index++;}else {strcat(non_numbers, argv[i]);strcat(non_numbers, " ");}}

2) To store any integer arguments into an array of integers. Here's the implementation:int num;int numbers[10];int number_index = 0;char non_numbers[250] = "";for(int i = 1; i < argc; i++) {if(sscanf(argv[i], "%d", &num) == 1) {numbers[number_index] = num;number_index++;}else {strcat(non_numbers, argv[i]);strcat(non_numbers, " ");}}

3) To store any non-integer argument (example: arg1) into 1 large string – separated by spaces, using sprint(). Here's the implementation:int num;int numbers[10];int number_index = 0;char non_numbers[250] = "";for(int i = 1; i < argc; i++) {if(sscanf(argv[i], "%d", &num) == 1) {numbers[number_index] = num;number_index++;}else {strcat(non_numbers, argv[i]);strcat(non_numbers, " ");}}

4) To print out the contents of your integer array (a newline after each element) and the contents of your single string. Here's the implementation:int num;int numbers[10];int number_index = 0;char non_numbers[250] = "";for(int i = 1; i < argc; i++) {if(sscanf(argv[i], "%d", &num) == 1) {numbers[number_index] = num;number_index++;}else {strcat(non_numbers, argv[i]);strcat(non_numbers, " ");}}for(int i = 0; i < number_index; i++) {printf("%d\n", numbers[i]);}printf("%s", non_numbers);

Know more about array here:

https://brainly.com/question/31605219

#SPJ11

what is ransomware? a crowdsourcing initiative that rewards individuals for discovering and reporting software bugs. software that is intended to damage or disable computers and computer systems. a type of malware designed to trick victims into giving up personal information to purchase or download useless and potentially dangerous software. a form of malicious software that infects your computer and asks for money.

Answers

Ransomware is a option D: form of malicious software (malware) that infects a victim's computer or network and holds their data hostage, demanding a ransom payment in exchange for restoring access to the encrypted files.

what is ransomware?

Ransomware is a form of malicious online activity, which has the objective  of coercing individuals, businesses, or institutions into paying a ransom, is known as a cyberattack.

When ransomware infects a computer or network, it encrypts the victim's files, rendering them inaccessible unless the user has the decryption key.

Learn more about ransomware from

https://brainly.com/question/27312662

#SPJ4

Convert the recursive workshop activity selector into iterative activity selector RECURSIVE-ACTIVITY-SELECTOR(s,f.k.n) m=k+1 while ≤ s [m], f [k] // find the firdt activity in s_k to finish m=m+1
if m≤ n
return {a_m} u RECURSIVE – ACTIVITY -SELECTOR ( s,f,m,n)
else
return

Answers

The iterative activity selector algorithm modifies the recursive activity selector algorithm to use an iterative approach. It finds the first activity that finishes in a given time frame by comparing the start and finish times of the activities. If a suitable activity is found, it is added to the result set. This iterative algorithm is implemented using a while loop and returns the selected activities.

The iterative activity selector algorithm, derived from the recursive version, aims to select activities based on their start and finish times. The algorithm begins by initializing two indices, m and k, where m is set to k + 1. A while loop is used to iterate as long as m is less than or equal to the total number of activities, n.

Within the loop, the algorithm compares the finish time of the kth activity with the start time of the mth activity. If the mth activity starts after the kth activity finishes, it means the mth activity can be included in the solution set. Therefore, m is incremented by 1.

After the loop, the algorithm checks if m is still within the range of the total number of activities, n. If it is, it means there are more activities to be selected, so the algorithm recursively calls itself with updated parameters (s, f, m, n) to continue the process.

If m is greater than n, the algorithm returns the set of activities it has selected so far. This set represents the maximum number of non-overlapping activities that can be performed within the given time frame.

In summary, the iterative activity selector algorithm modifies the recursive version to eliminate the use of function calls and instead uses a while loop to iteratively select activities based on their start and finish times. It returns the set of activities that can be performed without overlapping in the given time frame.

learn more about iterative activity selector here:

https://brainly.com/question/31969750

#SPJ11

Write a statement that assigns numCoins with numNickels + numDimes. Ex: 5 nickels and 6 dimes results in 11 coins. Note: These activities may test code with different test values. This activity will perform two tests: the first with nickels = 5 and dimes = 6, the second with nickels = 9 and dimes = 0. See How to Use zyBooks. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 #include int main(void) { int numCoins; int numNickels; int numDimes; numNickels = 5; numDimes = 6; /* Your solution goes here */ printf("There are %d coins\n", numCoins); return 0; }

Answers

The statement that assigns num Coins with num Nickels + num Dimes is shown below:```
num Coins = num Nickels + num Dimes;


```For example, if num Nickels is 5 and num Dimes is 6, then the result would be 11. If num Nickels is 9 and num Dimes is 0, then the result would be 9.As per the given problem, the output should print the number of coins, i.e., "There are 11 coins."

The code with the solution is shown below:```#include int main(void) { int numCoins; int num Nickels; int num Dimes; num Nickels = 5; num Dimes = 6; num Coins = num Nickels + num Dimes; printf("There are %d coins\n", num Coins); num Nickels = 9; num Dimes = 0; numCoins = num Nickels + num Dimes; printf("There are %d coins\n", num Coins); return 0; }```.

To know more about statement visit:

https://brainly.com/question/17238106

#SPJ11

are used in the Excel application to create calculations

Answers

Answer:

I think the answer is formulas

Pretty sure it is ‘Functions’
Other Questions
match the following Microsoft Windows 7 The expression 3/6 kids the weight of an object onto the moon in pounds in weight english news any three You want to buy some bonds that will have a value of $1,000 at the end of 9 years. The bonds pay 7.30 percent interest annually. How much should you pay for them today? (Round your final answer to the nearest penny.) O $475.69 O $350.75 O$689.25 O $530.40 wa A short sale of a stock is: 1. where the seller is then required to return an equal number of shares at some point in the future. 2.the sale of an asset or stock the seller does not own. 3.generally a transaction in which an investor sells borrowed securities in anticipation of a price decline. 4. mandated that any dividend declared during the transaction should go the original owner/s of the stocks. 5. All the options given are correct. Can someone help me. Can you show work. Please dont answer anything that isnt related, Ill report or flagged you if u do. Hi guys, this doesn't relate to art but I need help with something. How do I get rid of a previously signed-into account off the recently-signed into accounts on gmai*? Like when you click the box to sign in, and a list of gmai*s you used to login before will be there. How do I get rid of one? Which of the following is not true about the double box plot?A - The data for the steel coaster is symmetric.B - The data for the steel coaster is not symmetric.C - The fastest steel coaster travels 135 miles per hour.D - The slowest wooden coaster travels 60 miles per hour. Examples of capital budgeting investments could include all of the following except:a. Building a new storeb. Installing a new computer system c. Paying bonuses to the sales force d. Developing a new website 1) Choose any project (You can conduct an online research, if you do not have any experience), describe the organizational structure of the agency or company for which you are planning the project.2) Describe as many of the organizational culture attributes as you can. List, by name, as many of the project executive, management, and team roles as you can identify. Be sure to assign roles to yourselves.3) Describe the project life cycle model that is used in the organizationand if one is not currently used, describe the life cycle model you plan to use and tell why it is appropriate. how did trump win the election last time but didnt win this time?? help me with this plsss Consider the arithmetic sequence presented in the table below. What is the first term, ay, and the 22nd term of the sequence? n 4 37 an 16 115 Hint: Q, = a1 + d(n-1), where ay is the first term and d is the common difference. O a = 7, 222 - 68 O a = 3, 222 150 O a = 3, 222 = 148 O Q = 7, 222 = 70 A little boy stands on a carousel and rotates AROUND 4 times. If the distance between the little boy and the center of the carousel is 6 feet, then how many feet did the little boy travel? (C = 2r). Use 3.14 for pi. (Hint: he is going AROUND 4 times not just once). Only put in the number do not put in the unit of measure (ft). * Pls help me marking brainliest. 2. Find the solution to the recurrence relation bn = 4bn-1-4bn-2 with initial values bo = 1 and b = 2. Find the center and radius of the circle represented by the equation below. 100pts Find the value of x and find whether the angles or supplementary or complementary. What contributed to economic growth in America after World War II?A. The Red ScareB. ThepopcultureO C. The Cold WarO D. The baby boom Thallium-201 has a half-life 73 hours. If 4.0 mg of thallium-201 disintegrates over a period of 6.0 days and 2 hours, how many milligrams of thallium-201 will remain?