Company A is trying to sell its website to Company B. As part of the sale, Company A claims that the average user of their site stays on the site for 10 minutes. Company B is concerned that the mean time is significantly less than 10 minutes. Company B collects the times (in minutes) below for a sample of 17 users. Assume normality. Assume normality.

1.2
2.8
1.5
19.3
2.4
0.7
2.2
0.7
18.8
6.1
6
1.7
29.1
2.6
0.2
10.2
5.1
0.9
8.2

Conduct the appropriate hypothesis test for Company B using a 0.08 level of significance.

1. What are the appropriate null and alternative hypotheses?

a. H0: μ = 10 versus Ha: μ ≠ 10
b. H0: μ = 10 versus Ha: μ > 10
c. H0: x = 10 versus Ha: x ≠ 10
d. H0: μ = 10 versus Ha: μ < 10


2. What is the test statistic? Give your answer to four decimal places.
3. What is the critical value for the test? Give your answer to four decimal places.
4. What is the appropriate conclusion?

The only system of inequalities that has no solution is x<2 and x>7.(option-b)

The system of inequalities that has no solution is x<2 and x>7.

If x is less than 2, it cannot be greater than 7 at the same time. These two inequalities are contradictory, and there is no number that could satisfy both of them simultaneously.

The system of inequalities x>2 and x<7 forms an open interval between 2 and 7. Any value of x within this interval can satisfy both inequalities, so this system has a solution.

The system of inequalities x<2 and x<7 forms an inequality that is satisfied by any value of x that is less than 7, so this system also has a solution.

Lastly, the system of inequalities x>2 and x>7 forms an inequality that is not satisfied by any value of x, as there is no number that is simultaneously greater than 2 and greater than 7.(option-b)

For such more questions on  inequalities

https://brainly.com/question/25275758

#SPJ8

When viewed through the magnifying glass, the termite appears to be approximately 1.58 mm in length.

For more questions on magnifying glass

https://brainly.com/question/20876425

#SPJ8

The value of [tex]\(r\)[/tex] is [tex]\(r = -2\)[/tex], according to the given cartesian points.

To find the value of [tex]\(r\)[/tex], we can use the slope-intercept form of a linear equation, [tex]\(y = mx + b\)[/tex], where [tex]\(m\)[/tex] represents the slope of the line. Given that the line has a slope of [tex]\(-10\)[/tex] and passes through the cartesian points [tex]\((4, 8)\)[/tex]and \[tex]((5, r)\)[/tex], we can calculate the slope as follows:

[tex]\[m = \frac{{y_2 - y_1}}{{x_2 - x_1}} = \frac{{r - 8}}{{5 - 4}} = r - 8\][/tex]

Since the slope is [tex]\(-10\)[/tex], we can equate it to the calculated slope and solve for [tex]\(r\)[/tex]:

[tex]\[-10 = r - 8\][/tex]

Simplifying the equation, we have:

[tex]\[r - 8 = -10\][/tex]

Adding [tex]\(8\)[/tex] to both sides, we get:

[tex]\[r = -10 + 8\][/tex]

Therefore, the value of [tex]\(r\)[/tex] is [tex]\(r = -2\)[/tex].

In conclusion, the value of [tex]\(r\)[/tex] in the line with a slope of [tex]-10[/tex] passing through the points [tex](4, 8)[/tex] and [tex](5, \(r\))[/tex] is [tex]\(r = -2\)[/tex]. This satisfies the equation and represents the y-coordinate of the second point. This value of [tex]r[/tex] indicates that the second point lies on the line with a slope of -[tex]10[/tex] passing through ([tex]4,8[/tex]).

For more such questions on cartesian points:

https://brainly.com/question/9391785

#SPJ8

Answer:

495

Step-by-step explanation:

using the definition

n[tex]C_{r}[/tex] = [tex]\frac{n!}{r!(n-r)!}[/tex]

where n! = n(n - 1)(n - 2) ... × 3 × 2 × 1

then

12[tex]C_{4}[/tex]

= [tex]\frac{12!}{4!(12-4)!}[/tex]

= [tex]\frac{12!}{4!(8!)}[/tex]

cancel 8! on numerator/ denominator

= [tex]\frac{12(11)(10)(9)}{4!}[/tex]

= [tex]\frac{11880}{4(3)(2)(1)}[/tex]

= [tex]\frac{11880}{24}[/tex]

= 495

The correlation coefficient (r) is -0.96.

Given the data:

x: 0, 1, 2, 2, 3, 4, 5, 5, 6

y: 12, 9.5, 9, 8.5, 8.5, 6, 5, 5, 3.5

Step 1: Calculate the mean (average) of x and y.

Mean of x = (0 + 1 + 2 + 2 + 3 + 4 + 5 + 5 + 6) / 9 = 3

Mean of y  = (12 + 9.5 + 9 + 8.5 + 8.5 + 6 + 5 + 5 + 3.5) / 9 = 7

Step 2: Calculate the deviations from the mean for x and y.

Deviation of x (dx) = x - X

Deviation of y (dy) = y - Y

x: -3, -2, -1, -1, 0, 1, 2, 2, 3

y: 5, 2.5, 2, 1.5, 1.5, -1, -2, -2, -3.5

Step 3: Calculate the product of the deviations of x and y.

(dx * dy): -15, -5, -2, -1.5, 0, -1, -4, -4, -10.5

Step 4: Calculate the sum of the products of the deviations (Σ(dx * dy)).

Σ(dx * dy) = -15 - 5 - 2 - 1.5 + 0 - 1 - 4 - 4 - 10.5 = -43

Step 5: Calculate the standard deviations of x (σx) and y (σy).

Standard deviation of x (σx) = √(Σ(dx²) / (n-1))

Standard deviation of y (σy) = √(Σ(dy²) / (n-1))

Calculating dx²:

dx^2: 9, 4, 1, 1, 0, 1, 4, 4, 9

Σ(dx²) = 33

Calculating dy²:

dy²: 25, 6.25, 4, 2.25, 2.25, 1, 4, 4, 12.25

Σ(dy²) = 61

Calculating the standard deviations:

σx = √(33 / (9-1)) = √(33 / 8) ≈ 1.84

σy = √(61 / (9-1)) = √(61 / 8) ≈ 2.70

Step 6: Calculate the correlation coefficient (r).

r = Σ(dx dy) / (√(Σ(dx²)  Σ(dy²)))

r = -43 / (√(33  61))

r ≈ -43 / (√(2013))

r ≈ -43 / 44.87

r ≈ -0.96

Therefore, the correlation coefficient (r) is approximately -0.96.

Learn more about correlation coefficient here:

https://brainly.com/question/29704223

#SPJ1

We can determine the shortest distance from the surface xy+15x+z^2=209 to the origin.

Given the equation of the surface is xy + 15x + z^2 = 209.

Let's determine the shortest distance from the surface to the origin.

The shortest distance between the surface and the origin is given by the perpendicular distance, which can be calculated as follows:

Firstly, we need to determine the gradient of the surface, which is the vector normal to the surface.

For this purpose, we need to write the surface equation in the standard form, which is:xy + 15x + z^2 = 209 xy + 15x + (0)z^2 - 209 = 0 (the coefficients of x, y, and z are a, b, and c).

The gradient of the surface is given by the vector: ∇f = (a, b, c) = (y + 15, x, 2z) at the point P(x, y, z), which is a point on the surface.

Here, the normal vector is ∇f = (y + 15, x, 2z).

Now, let's consider a point A on the surface which is closest to the origin.

Let the coordinates of A be (a, b, c).

Therefore, the position vector of A is given by: OA = ai + bj + ck.

The direction of the position vector is in the direction of the normal vector, and therefore: OA is parallel to ∇f.

Thus, we can write: OA = λ∇f = λ(y + 15)i + λxj + 2λzkWhere λ is a scalar.

Since A lies on the surface, we have: a*b + 15a + c^2 = 209.

We also know that OA passes through the origin.

Therefore, the position vector of A is perpendicular to the direction vector OA.

This gives us: OA·OA = 0⟹ (ai + bj + ck)·(λ(y + 15)i + λxj + 2λzk) = 0

Simplifying this equation gives us:aλ(y + 15) + bλx + c(2λz) = 0

Also, we know that OA passes through the origin.

Therefore, the magnitude of OA is equal to the distance of A from the origin.

Hence, we can write: |OA| = √(a^2 + b^2 + c^2)

The value of λ can be obtained from the equation: aλ(y + 15) + bλx + c(2λz) = 0orλ = -2cz / (b + a(y + 15))

Substituting this value of λ in OA, we get: OA = λ(y + 15)i + λxj + 2λzk= -2cz/(b + a(y + 15)) (y + 15)i - 2cz/(b + a(y + 15)) xj - 4cz^2/(b + a(y + 15))k

Substituting this value of λ in |OA|, we get: |OA| = √[(2cz/(b + a(y + 15)))^2 + (2cz/(b + a(y + 15)))^2 + (4cz^2/(b + a(y + 15)))^2] = 2cz√[(y + 15)^2 + x^2 + 4z^2] / |b + a(y + 15)|

The distance of the point A from the origin is |OA|, which is minimized when the denominator is maximized. The denominator is given by |b + a(y + 15)|.

Thus, we have to maximize the denominator with respect to a and b. The condition for maximum value of the denominator is obtained by differentiating the denominator with respect to a and b separately and equating it to zero. The values of a and b obtained from these equations are substituted in the equation a*b + 15a + c^2 = 209 to obtain the coordinates of the point A, which is closest to the origin.

Hence, we can determine the shortest distance from the surface xy+15x+z^2=209 to the origin.

For more such questions on shortest distance, click on:

brainly.com/question/28935294

#SPJ

The type of transformation shown is vertical translation.

Since, Transformation of geometrical figures or points is the manipulation of a given figure to some other way.

Different types of transformations are Rotation, Reflection, Glide reflection, Translation and Dilation.

Given a polygon EFGH.

It is transformed to another polygon with the same size E'F'G'H'.

Here the polygon EFGH is just moved downwards as it is and mark is as E'F'G'H'.

If it is rotation or reflection, the points will change it's correspondent place.

Translation is a type of transformation where the original figure is shifted from a place to another place without affecting it's size.

Therefore, here translation is done.

Since the shifting is done vertically, it is vertical translation.

Hence the transformation is vertical translation.

Learn more about Vertical translation here :

brainly.com/question/12463306

#SPJ1

The correct statement is that they have different x- and y-intercepts, but we cannot determine their end behavior based on the given information.

Based on the information provided, we can compare the two functions f and g as follows:

Function f:

- It passes through the points (-10, -1) and (2, 8).

- It intercepts the x-axis at -2 units and the y-axis at 2 units.

Function g:

- It is represented by the table with x-values -2, -1, 0, 1, 2, and corresponding y-values 0, 2, 8, 26.

Comparing the two functions based on their intercepts and end behavior:

A. They have the same y-intercept and the same end behavior as x approaches ∞: This statement is incorrect because the y-intercepts of f and g are different. Function f intercepts the y-axis at 2 units, while function g intercepts the y-axis at 0 units. Additionally, we do not have information about the end behavior of either function.

B. They have the same x-intercept and the same end behavior as x approaches ∞: This statement is incorrect because the x-intercepts of f and g are different. Function f intercepts the x-axis at -2 units, while function g does not intercept the x-axis.

C. They have different x- and y-intercepts but the same end behavior as x approaches ∞: This statement is partially correct. Function f and g have different x- and y-intercepts, but we don't have information about their end behavior.

D. They have the same x- and y-intercepts: This statement is incorrect as the x- and y-intercepts of f and g are different.

For more such questions on intercepts

https://brainly.com/question/24212383

#SPJ8

The missing part indicated in the figures are ? = 12, TX = 9 and x = 20

Figure a

The missing part can be calculated using the following equation

?/(11 - 5) = 22/11

Evaluate the difference

?/6 = 22/11

So, we have

? = 6 * 22/11

Evaluate the expression

? = 12

Figure b

The missing part can be calculated using the following equation

TX/3 = 6/2

So, we have

TX = 3 * 6/2

Evaluate

TX = 9

Figure c

The value of x can be calculated using the following equation

1/4x + 6 = 2x - 29

So, we have

x + 24 = 8x - 116

Evaluate

-7x = -140

Divide

x = 20

Hence, the value of x is 20

Read more about similar shapes at

https://brainly.com/question/14285697

#SPJ1

It should be noted that the number of sample size based on the information will be 300.

In order to calculate the sample size, we can use the following formula:

n = z² * p * (1-p) / E²

n = 1.96² * 0.5 * (1-0.5) / 0.05²

= 300

A questionnaire is a method of gathering data that makes use of written questions to be answered by the respondents. It is a popular method of data collection because it is relatively easy to administer and can be used to collect a wide variety of information.

In the first column, the population is the entire National Capital Region (NCR). The sample is the city of Manila. In the second column, the population is all STEM students. The sample is all academic track students. In the third column, the population is all the tablespoons of sugar in the jar. The sample is one tablespoon of sugar. In the fourth column, the population is all the vowels in the word "juice". The sample is the vowel "i".

Learn more about sample on

https://brainly.com/question/24466382

#SPJ1

Answer:

-----------------

Find the differences in the sequence  -11, -7, -3, 1, ...

The difference is common, so the sequence is an AP.

The nth term is:

Find the 52nd term:

Find the 52nd term using the given formula:

Find the previous term:

Find the common difference:

Answer:

[tex]\begin{aligned}\textsf{34)} \quad d&=4\\a_n&=4n-15\\a_{52}&=193\end{aligned}[/tex]

[tex]\begin{aligned}\textsf{35)} \quad d&=-4\\a_{52}&=-238\end{aligned}[/tex]

Step-by-step explanation:

An arithmetic sequence is a sequence of numbers in which the difference between consecutive terms is constant.

Given sequence:

To determine if the given sequence is arithmetic, calculate the differences between consecutive terms.

[tex]a_4-a_3=1-(-3)=4[/tex]

[tex]a_3-a_2=-3-(-7)=4[/tex]

[tex]a_2-a_1=-7-(-11)=4[/tex]

As the differences are constant, the sequence is arithmetic, with common difference, d = 4.

The explicit formula for an arithmetic sequence is:

[tex]\boxed{a_n=a+(n-1)d}[/tex]

where:

To find the explicit formula for the given sequence, substitute a = -11 and d = 4 into the formula:

[tex]\begin{aligned}a_n&=-11+(n-1)4\\&=-11+4n-4\\&=4n-15\end{aligned}[/tex]

To find the 52nd term, simply substitute n = 52 into the formula:

[tex]\begin{aligned}a_{52}&=4(52)-15\\&=208-15\\&=193\end{aligned}[/tex]

Therefore, the 52nd term is a₅₂ = 193.

[tex]\hrulefill[/tex]

Given explicit formula for an arithmetic sequence:

[tex]a_n=-30-4n[/tex]

To find the common difference, we need to compare it with the explicit formula for the nth term:

[tex]\begin{aligned}a_n&=a+(n-1)d\\&=a+dn-d\\&=a-d+dn\end{aligned}[/tex]

The coefficient of the n-term is -4, therefore, the common difference is d = -4.

To find the 52nd term, simply substitute n = 52 into the formula:

[tex]\begin{aligned}a_{52}&=-30-4(52)\\&=-30-208\\&=-238\end{aligned}[/tex]

Therefore, the 52nd term is a₅₂ = -238.

There are 24 different orders in which Greg, Albert, Joseph, and Finn can take their turns being 'it' in the game of hide-and-seek.

To determine the number of different orders in which the children can take their turns being 'it' in a game of hide-and-seek, we can use the concept of permutations.

Since there are four children (Greg, Albert, Joseph, and Finn), we need to find the number of permutations of these four children. A permutation represents an arrangement of objects in a specific order.

The formula for calculating permutations is given by:

P(n, r) = n! / (n - r)!

Where n is the total number of objects (children) and r is the number of objects (children) to be arranged.

In this case, we have n = 4 (four children) and r = 4 (all four children will take their turns as 'it'). Plugging these values into the formula, we get:

P(4, 4) = 4! / (4 - 4)!

= 4! / 0!

= 4! / 1

= 4 × 3 × 2 × 1 / 1

= 24

Therefore, there are 24 different orders in which Greg, Albert, Joseph, and Finn can take their turns being 'it' in the game of hide-and-seek.

for such more question on different orders

https://brainly.com/question/25731911

#SPJ8

The area of triangle ADE is,

⇒ A = 48 square units

We have to given that,

In the diagram , DE is a midsegment of triangle ABC.

And, The area of triangle ABC is 96 square units

Now, We know that,

Since DE is a midsegment of triangle ABC, it is parallel to AB and half the length of AB. Therefore, DE is half the length of AB.

Hence, the area of triangle ADE is half the area of triangle ABC,

That is,

A = 96 / 2

A = 48 square units

Thus, The area of triangle ADE is,

⇒ A = 48 square units

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

The total amount of meat bought is 46/4 or 11.5 kg (or 11.5 kilograms).

To express the total amount of meat bought in fraction and decimal form, we need to add up the quantities of each type of meat.

The given quantities are:

2 kg and a quarter of beef

5 kg and two quarters (or a half) of chicken

4 kg and three quarters of pork loin

To find the total amount of meat bought, we can add these quantities:

2 kg and 1/4 + 5 kg and 1/2 + 4 kg and 3/4

To add these mixed numbers and fractions, we need to find a common denominator. The common denominator here is 4.

2 kg and 1/4 can be converted to 9/4 by multiplying 2 by 4 and adding 1.

5 kg and 1/2 can be converted to 9/2 by multiplying 5 by 2 and adding 1.

4 kg and 3/4 remains the same.

Now we can add the fractions:

9/4 + 9/2 + 4 + 3/4

To add the fractions, we need to find a common denominator, which is 4.

9/4 + 9/2 + 16/4 + 3/4

Now we can add the numerators and keep the denominator:

(9 + 18 + 16 + 3) / 4

The numerator becomes 46, so the total amount of meat bought is 46/4.

To express this as a decimal, we can divide the numerator by the denominator:

46 ÷ 4 = 11.5

Therefore, the total amount of meat bought is 46/4 or 11.5 kg (or 11.5 kilograms).

for such more question on total amount

https://brainly.com/question/26504675

#SPJ8

The percent decrease in total principal and interest paid between a 30-year term mortgage and a 15-year mortgage with a principal balance of $484,500.00 and a 6.5% APR is 31.0%. (Option A)

To calculate the  percent decrease, we can use the following formula.

Percent decrease = ( (30-year factor -   15-year factor) / 30-year factor) x 100

Substituting the values from the chart.  

= (($ 6.65 - $8.71) / $6.65) x 100

= ( -$ 2.06 / $6.65) * 100

= -0.309 *  100

Percent decrease ≈ - 30.9 %

Since the question asks for the percent decrease as a positive value, we take the absolute value of the result which is

Percent decrease ≈ 31%

Learn more about percentage decrease:
https://brainly.com/question/30404835
#SPJ1

It would cost approximately $119.42 to install the molding around the circular room, assuming the cost per foot is $4.22 and the diameter of the room is 9 feet.

To calculate the cost of installing molding around a circular room, we need to find the circumference of the room. The circumference of a circle is given by the formula C = πd, where C is the circumference and d is the diameter.

In this case, the diameter is given as 9. We can substitute this value into the formula to find the circumference:

C = π * 9

C ≈ 28.27 feet

Now that we know the circumference of the room is approximately 28.27 feet, we can calculate the cost of installing the molding. The cost per foot is given as $4.22.

Cost = Cost per foot * Circumference

Cost = $4.22 * 28.27

Cost ≈ $119.42

For more such questions on diameter

https://brainly.com/question/23220731

#SPJ8

How would you describe the difference between the graphs of f(x) = 2x² and g(x) = -2x²: D. g(x) is a reflection of f(x) over the x-axis.

In Mathematics and Geometry, a reflection over or across the x-axis is represented by this transformation rule (x, y) → (x, -y).

This ultimately implies that, a reflection over or across the x-axis would maintain the same x-coordinate while the sign of the y-coordinate changes from positive to negative or negative to positive.

In this context, we can reasonably infer and logically deduce that a graph of transformed function g(x) = -2x² would be created by applying a reflection over or across the x-axis to the graph of the parent function f(x) = 2x² as shown in the image attached below.

Read more on reflection here: brainly.com/question/27912791

#SPJ1

The Coordinates of the terminal point determined by `t = 1177` are approximately `(-0.17101, -0.98526)`.Thus, the correct option is B (-0.17101, -0.98526).

The following trigonometric function represents a point P on the unit circle as a function of the angle θ in standard position: `(cos θ, sin θ)`.

Here, we have to determine the coordinates of the terminal point determined by `t = 1177`.Terminal Point on a unit circle:The terminal point is a point on a circle that lies on the terminal side of an angle. The angles that end on the same terminal side of the x-axis are called coterminal angles. The angle between the positive x-axis and the line segment connecting the origin of the circle and the point on the circle is called the angle in the standard position.

So, the angle measure `t = 1177` may be too large or too small to locate the corresponding point P on the unit circle. To find an equivalent angle between 0 and 360 degrees, we may subtract or add an integral number of revolutions: `1177 - 360 × 3 = 97`.That is, an angle of `t = 1177` degrees is coterminal with an angle of `t = 97` degrees. The terminal point determined by `t = 1177` is the same as the terminal point determined by `t = 97`.

The point on the unit circle with `t = 97` degrees lies in the fourth quadrant because the standard angle of 97 degrees is obtained by rotating a ray 97 degrees counterclockwise from the positive x-axis.So, `P = (cos 97°, sin 97°)`.We can approximate the values of `cos 97°` and `sin 97°` using a calculator or computer software as: `cos 97° ≈ -0.17101` and `sin 97° ≈ -0.98526`.

Therefore, the coordinates of the terminal point determined by `t = 1177` are approximately `(-0.17101, -0.98526)`.Thus, the correct option is B (-0.17101, -0.98526).

To know more about Coordinates .

https://brainly.com/question/31217877

#SPJ8

Mikey Johnson shipped out 34 2/7 pounds of electrical supplies. The supplies are placed in individual packets that weigh 2 1/7 pounds each. Therefore, Mikey shipped out 16 packets of electrical supplies.

To solve the problem, we can use the following steps.Step 1: Find the weight of each packet.

We are given that the weight of each packet is 2 1/7 pounds.

To convert this mixed number into an improper fraction, we can multiply the whole number by the denominator and add the numerator.

This gives us: 2 1/7 = (2 × 7 + 1) / 7= 15 / 7 pounds.

Therefore, the weight of each packet is 15/7 pounds.

Now, divide the total weight by the weight of each packet.

We are given that the total weight of the supplies shipped out is 34 2/7 pounds.

To convert this mixed number into an improper fraction, we can multiply the whole number by the denominator and add the numerator.

This gives us: 34 2/7 = (34 × 7 + 2) / 7= 240 / 7 pounds.

Therefore, the total weight of the supplies is 240/7 pounds.

To find the number of packets that Mikey shipped out, we can divide the total weight by the weight of each packet.

This gives us: 240/7 ÷ 15/7 = 240/7 × 7/15= 16.

Therefore, Mikey shipped out 16 packets of electrical supplies.

For more such questions on electrical supplies, click on:

https://brainly.com/question/24015026

#SPJ8

first off, let's take a peek at the picture above

hmmm the hyperbola is opening sideways, that means it has a horizontal traverse axis, it also means that the positive fraction will be the one with the "x" variable in it.

now, the length of the horizontal traverse axis is 4 units, from vertex to vertex, that means the "a" component of the hyperbola is half that or 2 units, and 2² = 4, with a center at the origin.

[tex]\textit{hyperbolas, horizontal traverse axis } \\\\ \cfrac{(x- h)^2}{ a^2}-\cfrac{(y- k)^2}{ b^2}=1 \qquad \begin{cases} center\ ( h, k)\\ vertices\ ( h\pm a, k)\\ c=\textit{distance from}\\ \qquad \textit{center to foci}\\ \qquad \sqrt{ a ^2 + b ^2} \end{cases} \\\\[-0.35em] ~\dotfill\\\\ \cfrac{(x- 0)^2}{ 2^2}-\cfrac{(y- 0)^2}{ (\sqrt{3})^2}=1\implies {\Large \begin{array}{llll} \cfrac{x^2}{4}-\cfrac{y^2}{3}=1 \end{array}}[/tex]

The coordinates of the vertices for the image of the pre image is translated 4 units right are:

C. A' = (-1,2), B' = (5, 3), C' = (1,0)

A geometric transformation involves taking a geometric object as input and producing a new geometric object as output. We have different types of geometric transformations such as translation, rotation, reflection etc.

A translation moves a geometric object a certain distance in a certain direction. Translation to the right means movement in the positive x-direction.

Thus, the coordinates of the vertices for the image of the pre image if it is translated 4 units right can be obtained by adding 4 to x-coordinate values while y-coordinate values remain the same. That is:

A(-5,2) becomes A'(-5+4, 2) = (-1,2)

B(1,3)becomes  B'(1+4, 3) = (5, 3)

C(-3,0) becomes C'(-3+4, 0) = (1,0)

Therefore, the coordinates of the vertices of the image of triangle ABC after it is translated 4 units right are (-1, 2), (5, 3), and (1, 0).

Learn more about translation on:

brainly.com/question/12861087

#SPJ1

The algebra 2 is a vast field that deals with various mathematical concepts, such as equations and inequalities.

Algebra 2 is a branch of mathematics that mainly deals with equations and inequalities. An equation is a mathematical statement that implies that two expressions are equal.

Similarly, an inequality implies that two expressions are not equal but are related by a certain operation.There are different types of equations that one may encounter in Algebra 2.

A linear equation is an equation that can be represented by a straight line on the coordinate plane. A quadratic equation is one that can be written in the form ax² + bx + c = 0.

There are also exponential, logarithmic, and trigonometric equations that one may come across.Inequalities are statements that two expressions are not equal. Inequalities can be represented graphically on a coordinate plane, just like equations.

There are different types of inequalities such as linear, quadratic, exponential, and logarithmic inequalities.In conclusion,  These concepts help in solving real-world problems by providing a framework to analyze them mathematically.

To learn more about : algebra

https://brainly.com/question/22399890

#SPJ8

The Equation of circle for Circle B is (x - 2) ² + (y + 4)²  = 38.4.

For circle A:

Radius of circle A = √36 = 6

Area of circle A = π(6)^2 = 36π

Let's assume the radius of circle B is r.

Circumference of circle A = 2π(6) = 12π

Circumference of circle B = 3.2 x Circumference of circle A

= 3.2 x 12π

= 38.4π

Since the ratio of the areas is equal to the ratio of the circumferences, we have:

Area of circle B / Area of circle A = (r^2π) / (36π) = 38.4π / 36π

Simplifying, we get:

r² / 36 = 38.4 / 36

Cross-multiplying, we have:

36 x r² = 38.4 x 36

Dividing both sides by 36:

r^2 = 38.4

Taking the square root of both sides:

r = √38.4

Now we have the radius of circle B. Let's substitute this value into the equation for circle B:

(x - 2) ² + (y + 4)² = (√38.4)²

Simplifying:

(x - 2) ² + (y + 4)²  = 38.4

Learn more about equation of circle here:

https://brainly.com/question/29104982

#SPJ1

The length of side X in simple radical form with a rational denominator is 25/√3.

In Mathematics and Geometry, a 30-60-90 triangle is also referred to as a special right-angled triangle and it can be defined as a type of right-angled triangle whose angles are in the ratio 1:2:3 and the side lengths are in the ratio 1:√3:2.

This ultimately implies that, the length of the hypotenuse of a 30-60-90 triangle is double (twice) the length of the shorter leg (adjacent side), and the length of the longer leg (opposite side) of a 30-60-90 triangle is √3 times the length of the shorter leg (adjacent side):

Adjacent side = 5/√3

Hypotenuse, x = 5 × 5/√3

Hypotenuse, x = 25/√3.

Read more on 30-60-90 triangle here: brainly.com/question/30283450

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

We subtract the cost of wine when buying one bottle per week from the cost of wine when buying two bottles per weekend. Miranda saves $780 in one year by buying only one bottle of wine per week instead of two.

To calculate how much Miranda saves in one year by buying only one bottle of wine per week instead of two, we can follow these steps:

Determine the number of bottles of wine she buys in a year:

Miranda used to buy 2 bottles of wine per weekend, so in a week, she bought 2 bottles.

Since there are 52 weeks in a year, the number of bottles she bought in a year is 2 bottles/week * 52 weeks = 104 bottles.

Calculate the total cost of wine for the year:

Since each bottle costs $15, the total cost of wine for the year when buying 2 bottles per week would be 104 bottles * $15/bottle = $1560.

Calculate the cost of wine for one year when buying only one bottle per week:

With Miranda's decision to buy one bottle per week, the total number of bottles she buys in a year is 1 bottle/week * 52 weeks = 52 bottles.

Therefore, the cost of wine for one year when buying only one bottle per week would be 52 bottles * $15/bottle = $780.

Calculate the amount saved in one year:

To determine the amount saved, we subtract the cost of wine when buying one bottle per week from the cost of wine when buying two bottles per weekend.

Amount saved = $1560 - $780 = $780.

Therefore, Miranda saves $780 in one year by buying only one bottle of wine per week instead of two.

For more questions on saves

https://brainly.com/question/30910943

#SPJ8

Based on the calculations using unit pricing, Toilet paper B has a lower unit price and is the better deal between the two. Customers will save more money if they purchase toilet paper B rather than toilet paper A because the price per mega roll is lower. (option b)

Saving money while shopping is one of the best ways to reduce your expenses and have more disposable income for other things. Unit pricing is a pricing system that displays prices in standard units, allowing customers to compare prices across different brands and package sizes and save money. To determine which toilet paper deal is better, we can use the unit price method, which divides the price by the number of units in the package. The toilet paper with the lower unit price is the better deal.
The formula for unit pricing is as follows:
Unit price = total price ÷ number of units
Using the above formula, we can calculate the unit price of toilet paper A and toilet paper B as follows:
For Toilet paper A:
Unit price = $4.59 ÷ 6 mega rolls
Unit price = $0.765 per mega roll
For Toilet paper B:
Unit price = $9.02 ÷ 12 mega rolls
Unit price = $0.751 per mega roll
Therefore, based on the calculations, Toilet paper B has a lower unit price and is the better deal between the two. Customers will save more money if they purchase toilet paper B rather than toilet paper A because the price per mega roll is lower. (option b)
Unit pricing is a great way to compare prices, and consumers should always use it to determine the better deal between two products, as this will help them save money and stick to their budget.

For more such questions on Unit pricing, click on:

https://brainly.com/question/29023044

#SPJ8

There are like 4 people watching this question...

Answer:

1335.6

Step-by-step explanation:

volume = pir^2 h = (3.14)(6)^2(15) = (3.14)(36)(15) = (47.1)(36) = 1,335.6

The volume of the tank is 1695.60 ft³.

A cylinder is a three-dimensional object. It is a prism with a circular base. The volume is the amount of space in an object.

Volume of a cylinder = πr²h

Where:

= 3.14 x 6² x 15 = 1695.60 ft³

To learn more about to determine the volume of a cylinder, check: https://brainly.com/question/9624219

#SPJ1

Answer:

see explanation

Step-by-step explanation:

to find the first 5 terms substitute n = 1, 2, 3, 4, 5 into the explicit formula

36

a₁ = - [tex]3^{1-1}[/tex] = - [tex]3^{0}[/tex] = - 1 [ [tex]a^{0}[/tex] = 1 ]

a₂ = - [tex]3^{2-1}[/tex] = - [tex]3^{1}[/tex] = - 3

a₃ = - [tex]3^{3-1}[/tex] = - 3² = - 9

a₄ = - [tex]3^{4-1}[/tex] = - 3³ = - 27

a₅ = - [tex]3^{5-1}[/tex] = - [tex]3^{4}[/tex] = - 81

the first 5 terms are - 1, - 3, - 9, - 27, - 81

to find a₈ substitute n = 8 into the explicit formula

a₈ = - [tex]3^{8-1}[/tex] = - [tex]3^{7}[/tex] = - 2187

37

to find the first 5 terms substitute n = 1, 2, 3, 4, 5 into the explicit formula

a₁ = 2 × [tex](\frac{1}{2}) ^{1-1}[/tex] = 2 × [tex](\frac{1}{2}) ^{0}[/tex] = 2 × 1 = 2

a₂ = 2 × [tex](\frac{1}{2}) ^{2-1}[/tex] = 2 × [tex](\frac{1}{2}) ^{1}[/tex] = 2 × [tex]\frac{1}{2}[/tex] = 1

a₃ = 2 × [tex](\frac{1}{2}) ^{3-1}[/tex] = 2 × [tex](\frac{1}{2}) ^{2}[/tex] = 2 × [tex]\frac{1}{4}[/tex] = [tex]\frac{1}{2}[/tex]

a₄ = 2 × [tex](\frac{1}{2}) ^{4-1}[/tex] = 2 × ([tex]\frac{1}{2}[/tex] )³ = 2 × [tex]\frac{1}{8}[/tex] = [tex]\frac{1}{4}[/tex]

a₅ = 2 × [tex](\frac{1}{2}) ^{5-1}[/tex] = 2 × [tex](\frac{1}{2}) ^{4}[/tex] = 2 × [tex]\frac{1}{16}[/tex] = [tex]\frac{1}{8}[/tex]

the first 5 terms are 2 , 1 , [tex]\frac{1}{2}[/tex] , [tex]\frac{1}{4}[/tex] , [tex]\frac{1}{8}[/tex]

to find a₈ substitute n = 8 into the explicit formula

a₈ = 2 × [tex](\frac{1}{2}) ^{8-1}[/tex] = 2 × [tex](\frac{1}{2}) ^{7}[/tex] = 2 × [tex]\frac{1}{128}[/tex] = [tex]\frac{1}{64}[/tex]

Answer:

The explicit formula for a geometric sequence is:

a_n = a_1 * r^(n - 1)

where:

In equation 36,

we can see that the first term is -3 and the common ratio is -3. Therefore, we can write the explicit formula for this sequence as:

a_n = -3 * (-3)^(n - 1)

Using this formula, we can find the first five terms and the 8th term in the sequence:

a_1 = -3

a_2 = -3 * (-3) = 9

a_3 = -3 * (-3)^2 = -27

a_4 = -3 * (-3)^3 = 81

a_5 = -3 * (-3)^4 = -243

a_8 = -3 * (-3)^7 = 6561

In equation 37,

we can see that the first term is 2 and the common ratio is 1/2. Therefore, we can write the explicit formula for this sequence as:

a_n = 2 * (1/2)^(n - 1)

Using this formula, we can find the first five terms and the 8th term in the sequence:

a_1 = 2

a_2 = 2 * (1/2) = 1

a_3 = 2 * (1/2)^2 = 1/2= 0.5

a_4 = 2 * (1/2)^3 =1/4= 0.25

a_5 = 2 * (1/2)^4 = 1/8=0.125

a_8 = 2 * (1/2)^7 = 1/64=0.015625

The integral is ln|x + cos(x)| + C, where C represents the constant of integration.

To find the integral of the function 1/(x + cos(x)), we can employ a combination of algebraic manipulation and the use of standard integration techniques. Here's the solution:

First, let's rewrite the integral in a slightly different form to simplify the process:

∫(1/(x + cos(x))) dx

We notice that the denominator, x + cos(x), is not amenable to direct integration. To overcome this, we employ a substitution. Let's set u = x + cos(x). Now, differentiate u with respect to x: du/dx = 1 - sin(x).

Rearranging this equation, we get dx = du/(1 - sin(x)).

Substituting these values, the integral becomes:

∫(1/(u(1 - sin(x)))) du

Next, we simplify further by factoring out 1/(1 - sin(x)) from the integral:

∫(1/(u(1 - sin(x)))) du = ∫(1/u) du = ln|u| + C

Replacing u with its original expression, we have:

ln|x + cos(x)| + C

Therefore, the answer to the integral is ln|x + cos(x)| + C, where C represents the constant of integration.

For more questions on integral

https://brainly.com/question/30094386

#SPJ8