Answer:
b. 1.5 atm.
Explanation:
Hello!
In this case, since the undergoing chemical reaction suggests that two moles of A react with one moles of B to produce two moles of C, for the final pressure we can write:
[tex]P=P_A+P_B+P_C[/tex]
Now, if we introduce the stoichiometry, and the change in the pressure [tex]x[/tex] we can write:
[tex]P=1.0-2x+1.0-x+2x[/tex]
Nevertheless, since the reaction goes to completion, all A is consumed and there is a leftover of B, and that consumed A is:
[tex]x=\frac{1.0atm}{2}=0.5atm[/tex]
Thus, the final pressure is:
[tex]P=1.0-2(0.5)+1.0-(0.5)+2(0.5)\\\\P=1.5atm[/tex]
Therefore the answer is b. 1.5 atm.
Best regards!
How many moles of oxygen, are needed to react with excess propane, C3H8, to produce 15.0 moles of water?
Answer:
1 mole of C3H8 reacts with __five__ moles of O2 to produce __three__ moles of CO2 and of H2O.
Explanation:
Hope This Helps
While boiling potatoes for dinner in salted water, the pot boils over and you notice that the flame on your gas burner turns to bright yellow-orange. How would you explain the appearance of a color in the previously blue flame?
Answer:
This observation can be explained under the following reasons:
High sodium contentLowered heat temperatureOrganic burnExplanation:
High sodium content from the potato fluid causes the flame to turn yellow, as indicative of the presence of sodium (flame test).
The colour change could also be attributed to the drastic lowering of the burner heat. Finally, pure organics like wood and fats burn red, a would be the case with fluids from the boiled potatoes.
I hope this explanation was helpful.
The appearance of a yellow-orange color in the previously blue flame is due to the presence of sodium ions in the salted water.
The salted water in which the potato is being boiled contains sodium ions according to the equation:
[tex]NaCl ---> Na^+ + Cl^-[/tex]
Sodium ions generally give off yellowish color when burned in flames. Thus, when the pot boiled over, ions of sodium got into the flame on the gas burner and give off their characteristic flame color.
More on the flame test can be found here: https://brainly.com/question/6357832
Determine the energy in joules of a photon whose frequency is 3.05 ✕ 10^17 Hz.
Answer:
The energy of photon is 20.22×10⁻¹⁷ J
Explanation:
Given data:
Frequency of photon = 3.05×10¹⁷ Hz
Energy of photon = ?
Solution:
Formula:
E = hf
h = planck's constant = 6.63×10⁻³⁴ Js
Now we will put the values in formula.
E = 6.63×10⁻³⁴ Js × 3.05×10¹⁷ Hz
Hz = s⁻¹
E = 20.22×10⁻¹⁷ J
Thus, the energy of photon is 20.22×10⁻¹⁷ J
Which term describes the process of water moving from plant leaves to the atmosphere? Air pressure Humidity Transpiration Density
Explanation:
transpiration good luck
Answer:
Transpiration
Explanation:
I took a quiz on the water cycle and this was the correct answer. if I am wrong then I am sorry but I'm pretty sure this is correct.
In this lab, you will do experiments to identify types of changes. Using the question format you learned (shown above), write an investigative question that you can answer by doing these experiments. Lab question: How can you distinguish a physical change from a chemical change?
Answer:
a physical change does not change the composition (what it's made of) as a chemical change would.
Physical changes are differentiated from the chemical changes by means of the state of the substance which is obtained after the change.
What are physical changes ?Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical changes,here:
https://brainly.com/question/17931044
#SPJ2
Is it possible to use both renewable and nonrenewable resources together?
Answer:
use socratic it helps me get A+
How many hydrogen atoms are in a molecule of table sugar (C12H22011)?
O A. 11
B. 22
C. 12
D. 45
Hydrogen atoms are in a molecule of table sugar (C₁₂H₂₂O₁₁) is 22
An atom is a particle of matter that uniquely defines a chemical element and in the table sugar molecule the formula is C₁₂H₂₂O₁₁ then the hydrogen atoms are present in the molecule is 22 and it is used for the adding sweetness to your coffee and baking and used as the food manufacture in various food and drink products due to its unique properties that add to the appearance
Know more about hydrogen atoms
https://brainly.com/question/21182137
#SPJ1
Balance the following equation:
B203(s) + HF(l) => BF3(g) + H20(l)
20 B203(s) + 12180 HF(l) = 4060 BF3(g) + 609 H20(l)
Solid calcium carbonate decomposes to produce solid calcium oxide and carbon dioxide gas. Express your answer as a chemical equation. Identify all of the phases in your answer.CaCO,(s)-CaO(s) + CO2(g)
Answer:
[tex]CaCO_3(s)\rightarrow CaO(s)+CO_2(g)[/tex]
Explanation:
Hello!
In this case, when solid calcium carbonate, CaCO3 (s), is decomposed by the action of thermal energy (heat), solid calcium oxide, CaO (s) and carbon dioxide gas, CO2 (g) are yielded via the following reaction:
[tex]CaCO_3\rightarrow CaO+CO_2[/tex]
However, since calcium carbonate is solid as well as calcium oxide and carbon dioxide is given off as a gas, we write:
[tex]CaCO_3(s)\rightarrow CaO(s)+CO_2(g)[/tex]
Which also balanced.
Best regards!
A piston compresses the air in the cylinder by doing 97.0 J of work on the air. As a result, the air gives off 191.0 J of heat to the surroundings. If the system is the air in the cylinder, what is the change in its internal energy?
Answer:
[tex]\Delta U=-94.0J[/tex]
Explanation:
Hello!
In this case, since the first law of thermodynamics allows us to understand how the energy behaves when heat and work are involved during a process, we can mathematically define it as:
[tex]Q-W=\Delta U[/tex]
Whereas Q is the heat added to the system, W the work done by the system and ΔU the change in the internal energy, we can notice that since 97.0 J of work are done on the system it would be negative and the given off heat is also heat due to the used convention; therefore the change in its internal energy turns out:
[tex]-191.0J-(-97.0J)=\Delta U\\\\\Delta U=-94.0J[/tex]
Best regards!
4. Chemical formula, mg (Cl0₃)2
a) calculate the number of moles for 3.24g, Mg (Cl03)2
b) calculate the molarity of mg (Cl03)2 if all of it were dissolved in
5.08 L distilled water.
Answer:
0.017mole
0.0033M
Explanation:
Given parameters:
Formula of the compound:
Mg(ClO₃)₂
Mass of the sample = 3.24g
Unknown:
Number of moles of the sample = ?
Molarity = ?
Solution:
The number of moles of any substance is given as:
Number of moles = [tex]\frac{mass}{volume}[/tex]
Molar mass of Mg(ClO₃)₂ = 24 + 2[35.5 + 3(16)] = 191g/mol
Number of moles = [tex]\frac{3.24}{191}[/tex] = 0.017mole
Molarity is the number of moles of a solute in a solution:
Molarity = [tex]\frac{number of moles }{volume}[/tex]
Volume given = 5.08L
Molarity = [tex]\frac{0.017}{5.08}[/tex] = 0.0033M
2.83 kJ are added to a sample of water at 100°C and it completely vaporizes. What is the
mass of the water?
general formula
Answer:
general formula: Q=mHv, 2.83=m(2260), 2260/1000=2.26 , 2.83/2.26=1.25 kJ
Explanation:
A 7.2 L balloon at 2 atm of pressure has its pressure reduced to 0.5 atm. What is the new size of the balloon, in liters?
Explanation:
using Boyles law: which shows the relationship between pressure and volume, when temperature Is kept constant
P1V1 = P2V2
2 x 7.2 = 0.5 x V2
14.4 = 0.5 x V2
V2 = 14.4/0.5 = 28.8 L
Hence the new size of the balloon in litres is 28.8
Remember this quote?!
Answer:
Yes
Explanation:
Which of the following pairs of elements would form an ionic bond? (Select all that
apply.)
T Pand cl
Hand N
u Kand F
Mg and I
Answer:t pans
Explanation:it’s the cool thing
How many moles of magnesium chloride can be formed from 4.86 g of Mg and 21.27 g of Cl2?
Answer:
Moles of magnesium chloride can be produced are 0.2 moles
Explanation:
The reaction of Mg with Cl2 is:
Mg + Cl₂ → MgCl₂
Where 1 mole of Mg reacts per mole of Cl₂ to produce MgCl₂.
As the reaction is 1:1, we need to convert the mass of both Mg and Cl₂ to moles. The lower number of moles will determine the moles of MgCl₂ that will be produced:
Moles Mg -Molar mass: 24.3g/mol-:
4.86g * (1mol / 24.3g) = 0.2 moles Mg
Moles Cl₂ -Molar mass: 24.3g/mol-:
21.27g * (1mol / 70.9g) = 0.3 moles Cl₂
As moles of Mg < moles of Cl₂, Mg is limiting reactant and moles of magnesium chloride can be produced are 0.2 moles
Conner conducts the following experiment. He places a bell in a vacuum jar. During his first trial, he leaves the bell outside the jar. He sees the bell vibrating and he hears the bell ringing. During his second trial, he removes the air from the vacuum jar. He sees the bell vibrating but he does not hear the abell ringing. What does this experiment tell the student about waves?
A.Light waves are electromagnetic waves and sound waves are mechanical waves.
B.Light waves are mechanical waves and sound waves are electromagnetic waves.
C.Both light waves and sound waves need a medium to travel through.
D.Neither light nor sound waves need a medium to travel through.
Answer:
A. Light waves are electromagnetic waves and sound waves are mechanical waves.
Explanation:
The experiment is clear proof that light waves are electromagnetic waves and that sound waves are mechanical waves.
Electromagnetic waves are waves that do not require a material medium for their propagation. Although, with material medium they can also be propagated. This is why in both set up, the bell still vibrates. Mechanical waves are dependent on the material in the medium. They cannot be propagated in vacuum. There is no matter present in vacuum to help transmit the sound waves.a rock that originally had a mass of 1.00g of uranium_238 now only has .125g left. how old is the rock if the half life of uranium_238 is 4.5 billion years?
Answer:
no it would be 2.5 mill your welcome
Explanation:
is there anything smaller than an atom
Answer:
subatomic particles are actually small than atoms
Yes, particles such as protons, neutrons, and electrons that make up the atom are smaller than atoms.
Write the dissolution reaction for ammonium phosphate in water. Be sure to specify the state of each reactant and product.
Answer:
The equation showing the dissolving of solid ammonium phosphate in water is: (NH4)3 PO4 (s) → 3NH4 +1 (aq) + PO4 -3 (aq).
Explanation:
A sample of NaOH (sodium hydroxide) contains a small amount of Na2CO3 (sodium carbonate). For titration to the phenolphthalein endpoint, 0.200 g of this sample requires 23.98 mL of 0.100 M HCl. An additional 0.700 mL of 0.100 M HCl is required to reach the methyl orange endpoint. What is the percentage of Na2CO3 by mass in the sample?
Express your answer to three significant figures and include the appropriate units.
Answer:
1.86% Na₂CO₃
Explanation:
The additional volume that is required to reach endpoint with methyl orange indicator is due the presence of carbonate (Calculated as sodium carbonate). The reaction is:
Na₂CO₃ + 2HCl → H₂O + CO₂ + 2NaCl
Thus, we need to obtain moles of HCl and, using the reaction, solve for moles of sodium carbonate, its mass and percentage using molar mass of Na₂CO₃: 106g/mol.
Moles HCl:
0.700mL = 0.700x10⁻³L * (0.100mol / L) = 7.00x10⁻⁵moles HCl
Moles Na₂CO₃:
7.00x10⁻⁵moles HCl * (1mol Na₂CO₃ / 2 mol HCl) = 3.5x10⁻⁵ moles Na₂CO₃
Mass:
3.5x10⁻⁵ moles Na₂CO₃ * (106g / mol) = 0.00371g Na₂CO₃
Percentage:
0.00371g Na₂CO₃ / 0.200g * 100 =
1.86% Na₂CO₃Which is true about periods and groups?
O Groups are horizontal and their number tells us the number of energy levels in an atom of that
element. Periods are vertical and contain elements with similar properties.
Periods are horizontal and their number tells us the number of energy levels in an atom of that
element. Groups are vertical and contain elements with similar properties.
Answer:
Periods are horizontal and their number tells us the number of energy levels in an atom of that element.
Groups are vertical and contain elements with similar properties.
Explanation:
The periodic table systematically arranges elements over one another based on their atomic numbers.
Elements having the same number of electrons in the outermost shell of their atoms are placed over one another in vertical columns called groups or family. Hence, elements in the same group will have similar chemical properties.
Elements in the same period have the same number of electronic shell. This number corresponds to the energy level of the elements.
Need help please
Balancing the equation in the pic
During a tug of war competition neither team was able to gain an advantage which of the following explains the force is this situation
How does mass of an object affects velocity?
Answer: The amount of matter in a particle or object.
Calculate the mass of calcium carbonate produced if 15.2 mL of 0.306 M K2CO3 is reacted with 17.0 mL of 0.295 M CaCl2.
Answer:
[tex]m_{CaCO_3}=0.465g[/tex]
Explanation:
Hello!
In this case, since the reaction between two aqueous solutions may turn out in the production of a solid precipitate, for potassium carbonate and calcium chloride, calcium carbonate is precipitated out as shown below:
[tex]CaCl_2(aq)+K_2CO_3(aq)\rightarrow 2KCl(aq)+CaCO_3(s)[/tex]
Now, since the two reactants are in a 1:1 mole ratio, we infer they react in the same proportion, thus we compute the reacting moles, considering the used volumes of those molar solutions:
[tex]n_{K_2CO_3}=0.0152L*0.306mol/L=0.00465mol\\\\n_{CaCl_2}=0.0170*0.295mol/L=0.00502mol[/tex]
Thus, since just 0.00465 mol out of 0.00502 moles of calcium chloride are consumed, the potassium carbonate is the limiting reactant, therefore the mass of yielded calcium carbonate (molar mass = 100.09 g/mol) is:
[tex]m_{CaCO_3}=0.00465molK_2CO_3*\frac{1molCaCO_3}{1molK_2CO_3} *\frac{100.09gCaCO_3}{1molCaCO_3}\\\\m_{CaCO_3}=0.465g[/tex]
Best regards!
Explain how density is used to calculate the number of atoms in a mole.
Answer: The equation is fairly simple. The number of atoms of ANY substance in a volume is: # of atoms = N * (density) * volume / (Molecular Weight). N is a constant called Avogadro's number and its equal to 6.022*1023 atoms/mole.
Explanation:
how many moles would 1.00 x10^23 molecules of methane represent
Answer:
Explanation:
1 x 10²³ molecules of methane
6.02 x 10²³ molecules of methane = 1 mole of methane
10²³ molecules of methane = 1 / 6.02 moles of methane
= .166 moles .
The moles of methane that contain 1 [tex]\rm \times\;10^2^3[/tex] molecule have been 0.166 mol.
The number of molecules of a compound can be given by the Avagadro number. The number of molecules in a mole of the compound has been equal to the Avagadro number. The Avagadro number has been constant with a value of 6.023 [tex]\rm \times\;10^2^3[/tex].
6.023 [tex]\rm \times\;10^2^3[/tex] molecules = 1 mole.
The given molecules of methane have been = 1 [tex]\rm \times\;10^2^3[/tex] .
The moles of given molecules will be:
6.023 [tex]\rm \times\;10^2^3[/tex] molecules = 1 mole.
1 [tex]\rm \times\;10^2^3[/tex] molecules = [tex]\rm \dfrac{1}{6.023\;\times\;10^2^3}\;\times\;1.0\;\times\;10^2^3[/tex] moles.
1 [tex]\rm \times\;10^2^3[/tex] molecules = 0.166 moles.
The moles of methane that contain 1 [tex]\rm \times\;10^2^3[/tex] molecule have been 0.166 mol.
For more information about the moles of the molecule, refer to the link:
https://brainly.com/question/14585733
Laszlo is running a column to separate a carboxylic acid and an alkyne. He accidentally uses acetone instead of hexane as his first eluent. What happens? A. The first fraction contains only carboxylic acid and the second fraction contains only alkyne. B. The first fraction contains both the carboxylic acid and the alkyne. C. The fractions are empty because both compounds remain on the column. D. The first fraction contains only alkyne and the second fraction contains only carboxylic acid. E. The first fraction contains only carboxylic acid and the alkyne remains on the column F. The first fraction contains only alkyne and the carboxylic acid remains on the column.
Answer:
B. The first fraction contains both the carboxylic acid and the alkyne.
Explanation:
Carboxylic acids dissolve in both polar and non-polar organic solvents hence they can dissolve in acetone along with the alkyne.
The correct sequence of adding eluting solvents is reversed, would have been the addition of hexane first in order to elute the alkyne selectively. The acetone may now be subsequently added to elute the carboxylic acid.
If this order the carboxylic acid and alkyne are eluted simultaneously.
What is the name of the product that forms when sodium hydroxide reacts with propanoic acid?
Answer:
Propionic acid reacts with NaOH(aq) to form sodium propionate and water.