Answer:
Explanation:
Electric Bulb: In an electric bulb, the filament of bulb gives light because of heating effect of electricity. The filament of bulb is generally made of tungsten metal; having melting point equal to 3380°C.
Electric iron: The element of electric iron is made of alloys having high melting point. Electric heater and geyser work on the same mechanism.
Electric fuse: Electric fuse is used to protect the electric appliances from high voltage; if any. Electric fuse is made of metal or alloy of metals, such as aluminium, copper, iron, lead, etc. In the case of flow of higher voltage than specified, fuse wire melts and protects the electric appliances.
a person runs 15 kilometers in two hours what is his/her average speed
Answer:
[tex]\displaystyle V=7.5\ km/h[/tex]
Explanation:
Average Speed
If an object travels a distance d in a time t regardless of the direction, the average speed is the quotient of the distance over the time:
[tex]\displaystyle V=\frac{d}{t}[/tex]
It's known a person runs d=15 kilometers in t=2 hours, thus his/her average speed is:
[tex]\displaystyle V=\frac{15\ km}{2\ h}[/tex]
Calculating:
[tex]\boxed{\displaystyle V=7.5\ km/h}[/tex]
A car is traveling on the highway at 55 MPH. A slow moving truck cuts them off. He hits the gas pedal and speeds up to 78 MPH in order to pass him. It takes 6 seconds to complete the pass. What was his acceleration?
Answer:8 mph
Explanation:
An electromagnetic wave is composed of electrical and magnetic energy.
Please select the best answer from the choices provided
T
F
Answer:
the answer is T!!
!!!!!!!!
Answer:
true
Explanation:
hope this helps
Kinetic energy can be calculated using the formula KE = 1/2mv2. What is the kinetic energy of a bicycle that has a mass of 20 kg and is traveling at a velocity of 10 m/sec?
KE = 1000 J
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightPhysics
Energy
Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]
Energy is in Joulesm is mass (in kg)v is velocity (in m/s)Explanation:Step 1: Define
m = 20 kg
v = 10 m/s
Step 2: Find KE
Substitute [KE]: [tex]\displaystyle KE = \frac{1}{2}(20)(10)^2[/tex]Exponents: [tex]\displaystyle KE = \frac{1}{2}(20)(100)[/tex]Multiply: [tex]\displaystyle KE = (10)(100)[/tex]Multiply: [tex]\displaystyle KE = 1000[/tex]A water heater takes 2.5A at 230V. What is its hot resistance?
Answer:
92 OHMS
Explanation:
The resistance will be "92 ohm".
According to the question,
Current,
2.5 AVoltage,
230 VAs we know the formula,
→ [tex]I = \frac{V}{R}[/tex]
or,
→ [tex]R = \frac{V}{I}[/tex]
By substituting the values, we get
→ [tex]= \frac{230}{2.5}[/tex]
→ [tex]= 92 \ ohm[/tex]
Thus the answer above is right.
Learn more:
https://brainly.com/question/16841137
Guidewords for the word “serpent” may be
a.
Serbia and service
c.
Seltzer and Saturday
b.
Seattle and section
d.
Solitude and second
THE CORRECT ONE IS A!!!!!!!!
Answer:
A. Serbia and service
Explanation:
A guide word is a word written on top of a page to indicate the first or last word entry on that page. For example in a dictionary, they indicate the alphabetical first and last words on the page.
In this example; the word ' serpent ' note the first three letters to guide you in the words that are on that page;
In this case : Serbia and Service.
If two 1000kg cars have a gravitational force of 1.067x10^-5 N towards each other, how far apart are they?
Answer:
6.25m
Explanation:
Given parameters:
Masses of the car = 1000kg
Gravitational force = 1.067 x 10⁻⁵N
Unknown:
Distance between them = ?
Solution:
To solve this problem, we use the expression below from the universal gravitational law;
Fg = [tex]\frac{G x mass 1 x mass 2}{distance^{2} }[/tex]
G = 6.67 x 10⁻¹¹
1.067 x 10⁻⁵ = [tex]\frac{6.67 x 10^{-11} x 1000 x 1000 }{d^{2} }[/tex]
d = 6.25m
A 80 N horizontal force is applied to a 20.0 kg block at rest on a horizontal surface where µS = 0.6.? What is the magnitude of the force of friction on the block?
Answer:
The frictional force on the block is 118 N.
Explanation:
Given;
horizontal force applied on the block, f = 80 N
mass of the block, m = 20.0 kg
coefficient of friction, μ = 0.6
The frictional force on the block is calculated as;
F = μR
F = μ(mg)
F = 0.6(20 x 9.81)
F = 117.7 N
F = 118 N.
Therefore, the frictional force on the block is 118 N.
what’s the doing between high and low pressure systems.
High pressure systems entail sinking air, while lows entail rising air. High pressure systems form where air converges in the higher levels of the atmosphere. The converging air has nowhere to go and is forced to sink toward the ground. This sinking effect inhibits cloud formation and therefore precipitation.
PLEASE HELPP
Look at the picture
The phases of the moon are caused by which of the following
A. Earths rotation around its axis
B. Earths orbit around the sun
C. The moons orbit around the earth
D. Earths shadow falling on the moon
Answer: C: The moons orbit around the earth.
Explanation:
A 50kg person standing still in ice skates throws their helmet to the right at 25 m/s while on a frictionless surface. This gives the person a speed of 1.0m/s leftwards. What is the mass of the helmet?
Consider rightward as the positive direction.
Answer:
2.0 kg
Explanation:
I NEED HELPP!!!
Calculating the Value of an Unknown Resistor
Question 17 of 25
A sound wave from a brass bell passes through the air with a
wavelength of 3.5 m. When the sound wave originated in the
brass bell, its wavelength was 47 m. If the sound wave has a
constant frequency of 100 Hz, what was its speed as it
traveled through the brass bell? (The equation for wave speed
is v= f*1.)
A. 3,500 m/s
B. 4,700 m/s
C. 350 m/s
D. 470 m/s
Answer:
The speed of the wave as it travelled through the brass bell is;
B. 4,700 m/s
Explanation:
The given parameters are;
The wavelength of the sound wave produced from the brass bell, [tex]\lambda _{(air)}[/tex] = 3.5 m
The wavelength of the wave in the brass bell, [tex]\lambda _{(brass \ bell)}[/tex] = 47 m
The frequency of the wave in the brass bell, f = 100 Hz
The given equation for wave speed, v = f × λ
Therefore, the speed of the wave as it travelled through the brass bell, [tex]v _{(brass \ bell)}[/tex], is given as follows;
[tex]v _{(brass \ bell)}[/tex] = f × [tex]\lambda _{(brass \ bell)}[/tex] = 100 Hz × 47 m = 4,700 m/s
The speed of the wave as it travelled through the brass bell = [tex]v _{(brass \ bell)}[/tex] = 4,700 m/s
Answer:
B.) 4700 m/s
Explanation:
Q. IF THE SPEED LIMIT IS 22M/S, IS THE CAR TRAVELLING TOO FAST.
Answer:
yes its travelling at 79.2 km/h (49.2m/h)
A bucket is filled partly with water such that its combined mass is 2.5 kg. It is tied to a rope and whirled in a circle with a radius of 1.4 m. The speed at the top of the circle is 4.0 m/s and the speed at the bottom of the circle is 6.0 m/s. Determine the magnitude of the net force acting on the bucket at the bottom of the circle.
Answer:
1. Simply τ = m x g x r = 54kg x 9.8m/s² x 0.050m = 26 N·m
2. The bucket creates a torque
τ = 75kg x 9.8m/s² x 0.075m = 55 N·m,
so we must create the same torque with the handle.
55 N·m = F x 0.25m
F = 220 N
Explanation:
Hope this is helpful
If there is a difference in air pressure between two locations, what happens?
Answer:
High in the atmosphere, air pressure decreases. ... A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. As the air rises, the water vapor within it condenses, forming clouds and often precipitation.
Explanation:
If an oceanic plate and a continent plate converge, or push towards each other, which plate will sink under the other one?
Answer:
The oceanic plate will sink under
Explanation:
Due to erosion over time and the sudden shift, the continental plate will rise causing earthquakes, tsunami’s, etc..
Object 1 has a charge of -2.3 x 10^-6 and Object 2 has a charge of - 4.2 x 10 ^- 6 C. Calculate the electrostatic force between the two objects if they are 0.099 m apart.
A) 9.76 x 10^-11 N
B) 9.86 x 10^-10 N
C) 8.87 N
D) 0.878 N
Explanation:
i think it's A or C hope it helps
Help Please!
Think about how you can get the color white from using light versus how you can get the color white from using paint or dye. Now, think about how you can get the color black from using light versus from paint or dye. Using this, explain why we call coloring from light “additive” and coloring from paint or dyes “subtractive”.
Answer: Subtractive colors absorb OR subtract some lights causing it to reflect, and creating white.
Explanation:
Subtractive colors are created by completely or partially absorbing (or subtracting) some light wavelengths and reflecting others.
Marina walked 2km in half an hour, what was her average speed during her walk?
Answer:
4km/hr
Explanation:
1. A net force of 13 Newtons acting north on an object for 4.0 seconds will produce an impulse of?
Answer:
48 kg m/s north
Explanation:
This is not the exact answer but if there's something really close choose that answer
MY BRAINS NOT WORKING
Describe how Newton's Third Law applies to the forces between the bike and
the trailer.
Answer:
Explanation:
The Earth pulls the bicycle downward through the force of gravity, and, in response, the bicycle pulls up on the Earth with a force of equal magnitude. Gravity "pushes" the Earth into the road, which pushes up with an opposite force, canceling gravity. Thus, action reaction forces do not cancel each other.
A 4.00 kg block is pushed along the ceiling with a constant applied force of 85.0 N that acts at an angle of 55.0 degrees with the horizontal. The block accelerates to the right at 6.00 m/s2. Determine the coefficient of kinetic friction between block and ceiling.
Answer:
0.35
Explanation:
According to Newton's second law;
\sum Fx = ma
Fm - Ff =ma
Fm is the moving force = Wsin theta
Fm = 4(9.8)sin55
Fm = 32.1N
Ff is the frictional force = nmgcos theta
Ff = n(4)(9.8)cos55
Ff = 22.48n
Acceleration a = 6.0m/s²
Substitute the given values into the formula and get the coefficient of friction
32.11-23.48n = 4(6)
32.11-24= 23.48n
8.11 = 23.48
n = 8.11/23.48
n = 0.35
Hence the coefficient of friction is 0.35
A softball and a baseball are launched from 2 different pitching machines at the same time.
th
Softball
182 g
165 m/sec
Baseball
143 g
112 m/sec
Which of these BEST explains what factors give the baseball and softball different velocities?
O mass and speed
O mass and direction
O speed and direction
O size and mass
HELP PLEASE!
A 700 kg race car makes one lap around a track. It has a velocity of 20 m/s with a centripetal force of 5,600 N. What is the radius of the track?
A speed skater goes around a turn with a 25 m radius. The skater has a velocity of 15 m/s and experiences a centripetal force of 720 N. What is the mass of the skater?
A 900-kg car moving at 5 m/s takes a turn around a circle with a radius of 30 m. Determine the net force acting upon the car.
An 800 kg race car makes one lap around a track. It has a velocity of 40 m/s with a centripetal force of 16,000 N. What is the radius of the track?
PLEASE EXPLAIN AND SHOW WORK!
The centripetal force is the force that keeps a body moving in a circular path.
The centripetal force is given by; F = mv^2/r
1) We have;
F = 5,600 N
v = 20 m/s
r =?
m = 700 kg
Making r the subject of the formula;
r =mv^2/F
r = 700 × (20)^2/5,600
r = 50 m
2) F = mv^2/r
F = 900 × (5)^2/30
F = 750 N
3) Making r the subject of the formula;
r =mv^2/F
r = 800 × (40)^2/ 16,000
r = 80 m
Learn more: https://brainly.com/question/11324711
please help, thank you !
Answer:
0.04658 m from the nut
Explanation:
Recall that torque is defined as the vector product of force (F) times distance (d). Then, given that the force is applied perpendicular to the wrench, gives the sine of the angle (90 degrees) equal to 1, simplifying the calculation which consists basically on solving for d in the equation:
2.25 N*m = 48.3 N * d
d = 2.25 /48.3 m ≈ 0.04658 m
Help Please! 5 questions for 25 points? seems fair? Thank you!
Answer:
1. where the skater turns and goes back in the opposite direction- point w
2. gravitational force of the object
3. point a
4. the bar representing sphere 4 should be twice as tall as the bar representing sphere 2
5. B; its mass is smaller (?)
yolo
Answer:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Explanation:
i need help cause i dont get it
I think it is wrong somehow
Across
3) biomass
5) fossil
6) dioxide
7) hydro
8) nuclear
Down
1)?
2)?
4) solar
An aeroplane of mass 30000kg produced a force of 20kN to get it to accelerate to 50m/s so it could take off. Calculate the amount of time it was accelerating for
Will mark branliest! Need working out aswell!
Answer:
[tex]75\:\mathrm{seconds}[/tex]
Explanation:
The impulse-momentum theorem states that the impulse of an object is equal to the change in momentum of that object:
[tex]\Delta p=m\Delta v[/tex].
Impulse is also given by [tex]F\Delta t[/tex] where [tex]F[/tex] is the average net force and [tex]\Delta t[/tex] is change in time.
Therefore, we can set both equations equal to each other and solve:
[tex]\Delta p= F\Delta t[/tex].
Assuming that the airplane was initially at rest, its change in momentum is:
[tex]\Delta p =m\Delta v,\\\Delta p=30,000\cdot 50=1,500,000[/tex]
Impulse is represented using [tex]Ns[/tex]. Therefore, convert [tex]20\:\mathrm{kN}[/tex] to Newtons:
[tex]20\:\mathrm{kN}=20,000\:\mathrm{N}[/tex]
Thus:
[tex]1,500,000=20,000\cdot t,\\t=\frac{1,500,000}{20,000}=\fbox{$75\mathrm{s}$}[/tex].