helphelphelphelphelphelphelphelp
Answer:
a is slower
b is constant
c is faster
how do i explain why two balls have the same velocity if they are rolling down the same slope but they started in different positions?
Answer:
When two balls are equally weighted, no matter where they are placed on a ramp, they will travel at the same speed. One will just reach the ground quicker.
Explanation:
A ball is dropped from the top of a building.
When does the ball have the least potential energy?
O after it has hit the ground
O half way through the fall
O as it is released
O just before it hits the ground
Answer:
after it has hit the ground
.........
Answer: A. after it has hit the ground
A pump lifts water into an overhead tank at a height of 12m at a rate of 5kg/s,what is the power in the pump?
Answer:
600 watts
Explanation:
Another elephant pushes with 3500 N on a load of trees. It then pushes these trees for 225 m. How much work did he elephant do?
Answer:
787, 500 N/m
Explanation:
Work = Force • displacement
[tex]Work = (3500 N)(225 m) = 787500\frac{N}{m}[/tex]
[tex]W = (3500 N)(225 m) = 787500\frac{N}{m}[/tex]
For the purpose of calculating the electric field strength by means of Gauss’s law, determine whether approximate cylindrical symmetry holds in each of the following situations.
Part (a) We have a 3.6-m long copper rod of radius 1 cm, carrying a charge of 1.5 nC distributed uniformly along the rod’s length. We want to calculate the electric field strength at a point 4.9 cm from the rod near its center.
TRUE FALSE
Part (b) We have a 8.9-cm long copper rod of radius 1 cm, carrying a charge of 1.5 nC distributed uniformly along the rod’s length. We want to calculate the electric field strength at a point 4.9 cm from rod near its center.
TRUE FALSE
Part (c) A 1.9-m long wooden rod is glued end-to-end to a 1.9-m long plastic rod, both of radius 1 cm. The combined rod is then painted with an electrically charged paint so that it is covered with a uniform charge density, giving it total charge of 1.5 nC. We want to calculate the electric field strength at a point 4.9 cm from the rod near its center.
TRUE FALSE
Part (d) For the same charged rod as in part (c) we want to calculate the electric field strength at a point 8.9 m from each end of the rod.
TRUE FALSE
Answer:
1. True
2. False
3. True
4. False
Explanation:
a) In this case, length of the copper rod is 3.6 m which is much larger than the distance 4.9 cm to the point at which electric field is to be determined. Therefore, yes, cylindrical symmetry holds.
b) In this case, length of the copper rod is 8.9 cm which is of the same order of magnitudes the distance 4.9 cm to the point at which electric field is to be determined. Therefore, no, cylindrical symmetry does not hold.
c) In this case, length of the copper rod is 3.8 m which is much larger than the distance 4.9 cm to the point at which electric field is to be determined. Therefore, yes, cylindrical symmetry holds.
d) In this case, length of the copper rod is 3.6 m which is of the same order of magnitudes the distance 4.9 cm to the point at which electric field is to be determined. Therefore, no, cylindrical symmetry does not hold.
A 10 kg block is pulled across a table by a horizontal force of 40 N with a frictional force of 5 N opposing the motion.
Calculate the acceleration of the object.
Newton second's law
∑F = m.a
40 - 5 = 10.a
35 = 10.a
a = 3.5 m/s²
Answer:
The acceleration of the object was 3.5 m/s².
Explanation:
Let the direction of the horizontal force be positive.
By Newton's second law, the sum of the horizontal forces is as follows:
[tex]\displaystyle \sum F_x = F_A - F_k = ma[/tex]
Where Fk is the frictional force and FA is the horizontal force.
Substitute in known values and solve for acceleration a:
[tex]\displaystyle \begin{aligned} (40\text{ N}) - (5\text{ N}) & = (10\text{ kg})a \\ \\ a &= 3.5\text{ m/s$^2$}\end{aligned}[/tex]
Hence, the acceleration of the object was 3.5 m/s².
What is the reading of the Voltmeter shown in the figure?
a. 8V
b. 10V
c. 16V
d. 20V
Answer:
Correct option is A)
Let us assume voltmeter is ideal:-It means voltmeter has infinite resistance and current will not flow in voltmeter.
R
eq
in upper branch = R
eq
in lower branch. So current will get equally divide into both branches.
V
A
−V
B
=4×1(1)
V
A
−V
D
=16×1(2)
Subtract 2 and 1
V
B
−V
D
=12V
A voltmeter will read 12 V
What is the magnitude of the electric field strength at a position that is 1.2 m from a point charge of 4.2 \times 10^{-6} \mathrm{C}4.2×10
−6C?
Answer:
lil durk a goat
Explanation:
A wheel rolls 5 revolutions on a horizontal surface without slipping. If the center of the wheel moves 3.2 m, what is the radius of the wheel
The radius of the wheel is 0.102 m.
What is radius of a circle?The radius of a circle is a straight line that comes from the center of a circle to any point of the circumference of the circle.
To calculate the radius of 5 revolutions of the wheel, we use the formula below.
Formula:
d = 10πr.............. Equation 1Where:
d = Total distance moved by the wheelr = radius of the wheel.π = pieMake r the subject of the equation
r = d/(10π)........... Equation 2From the question,
Given:
d = 3.2 mπ = 3.14Substitute these values into equation 2
r = 3.2/(10×3.14)r = 3.2/31.4r = 0.102 m.Hence, the radius of the wheel is 0.102 m.
Learn more about the radius of a circle here: https://brainly.com/question/798068
A cannonball is shot (from ground level) with an initial horizontal velocity of 20 m/s and an initial vertical velocity of 30 m/s. What's the maximum height reached by the cannonball
Answer:
maximum height = 46m
Explanation:
Vx = 20m/s
Vy = 30 m/s
gravity = 9.8 m/s/s
final velocity = initial velocity - gravity • time
0 = 30m/s - 9.8m/s/s • time
subtract 30m/s from both sides
-30m/s = - 9.8m/s/s • time
divide both sides by -9.8m/s/s
3.06 s = time
height = initial velocity • time - 1/2 • gravity • time^2
height = 30m/s • 3.06s - 1/2 • 9.8m/s/s • 3.06s ^2
height = 46m
the maximum height is equal to 46m
Activity A:
Surviving a crash
Get the Gizmo ready
• Click Reset (?).
. On the DESIGN tab, check that Sedan is selected
Introduction: Modern vehicles contain features designed to keep passengers safe in a crash.
The crumple zone in the front of the car slows the car gradually and increases stopping time.
The safety cell is a rigid cage that prevents passengers from being crushed. Inside, seat belts
and airbags prevent the driver from hitting the windshield, steering wheel, or dashboard.
Question: How does a crumple zone help protect a passenger?
1
Make a hypothesis: On the DESIGN tab, look at the parameters you can control. What
settings do you think will make the safest car? Set up the Gizmo, and then fill in below.
Crumple zone length:
Crumple zone rigidity:
Safety cell rigidity:
Seat belt present?
If present, seat belt stiffness:
Air bag present?
If present, air bag rigidity:
The crumple zone help protect a passenger from injury by converting some of the kinetic energy possessed by the car into a controlled deformation, or crumpling when there is a crash.
What is impact?The term impact refers to a large force that acts for a short time. Passengers in a vehicles sustain injuries after an accident due to the high impact of the crash.
As such, the crumple zone help protect a passenger from injury by converting some of the kinetic energy possessed by the car into a controlled deformation, or crumpling when there is a crash.
Learn more about impact in physics: https://brainly.com/question/10952916
2. How are the speed, wavelength, and frequency of a wave related
Answer:
speed = wavelength * frequency
Explanation:
speed = wavelength * frequency
- At time t = 0, a small ball is projected vertically upwards from a point A which is 24.5 m above the ground. The ball first comes to instantaneous rest at the point B, where AB = 19.6 m and first hits the ground at time t = T seconds. = The ball is modelled as a particle moving freely under gravity. (a) Find the value of T.
The value of time needed to complete the upward and the downward motion is, T=5sec .T is the time at which the ball first hits the ground.
What is the time period?The time period is found as the ratio of the displacement and the velocity. Its unit is second and denoted by t
The given data in the problem is;
The time required to move upwards is,t₁
The time required to move downwards is,t₂
The distance traveled is,s= 19.6m
The gravitational acceleration is, g=9.81 m/s
At the highest position, the velocity of the ball is zero;
The time required to move upwards is found as;
[tex]\rm S_1 = ut + \frac{1}{2} at^2 \\\\ \rm S_1 = \frac{1}{2} (-g)t_1^2 \\\\ t_1= \sqrt{\frac{2S_1}{g} } \\\\ t_1= \sqrt{\frac{2 \times 19.6 }{9.81} } \\\\ t_1= 2 \ sec[/tex]
The time required to move downward is found as;
[tex]\rm S_2 = ut + \frac{1}{2} at_2^2 \\\\ \rm S_1 = \frac{1}{2} (-g)t_2^2 \\\\ t_2= \sqrt{\frac{2S_2}{g} } \\\\ t_2= \sqrt{\frac{2 \times 44.1 }{9.81} } \\\\ t_2= 3 \ sec[/tex]
The total time period is the sum of the time required to move upwards and the time required to move downwards.
T =t₁+t₂
T=2+3
T=5 sec
Hence the value of T will be 5 sec.
To learn more about the time period refer to the link;
https://brainly.com/question/569003
What happens to an object’s momentum if its mass is reduced by half but its velocity remains the same?
If the mass of an object is halved and its velocity remains the same, its momentum will be halved.
What is momentum?Momentum is the quantity of motion of a moving body, measured as a product of its mass and velocity.
We can calculate the momentum of an object using the following expression.
p = m × v
where,
p is the momentum.m is the mass.v is the velocity.The initial momentum of the object is:
p₁ = m₁ × v₁
If its mass is reduced by half but its velocity remains the same, the new momentum is:
p₂ = m₂ × v₁ = 0.5 m₁ × v₁ = 0.5 p₁
If the mass of an object is halved and its velocity remains the same, its momentum will be halved.
Learn more about momentum here: https://brainly.com/question/7538238
As a boy pulls a sled carrying his sister, he exerts a force of 2.6 lbs.at an angle of 30 degrees with the ground. How much work does he do if he pulls her at a constant speed for exactly one-half mile (2640 ft)?
The amount of work done by the boy in pulling the sled is 8064.41 J
Definition of work doneWorkdone is defined as the product of force and distance moved in the direction of the force. It can be expressed mathematically as:
Workdone (Wd) = force (F) × distance (d)
Wd = Fd
Considering angle projection,
Wd = FdCosθ
How to determine the workdone Force (F) = 2.6 lb = 2.6 × 4.448 = 11.5648 NDistance (d) = 2640 ft = 2640 × 0.305 = 805.2 mAngle (θ) = 30°Workdone (Wd) =?Wd = FdCosθ
Wd = 11.5648 × 805.2 × Cos 30
Wd = 8064.41 J
Learn more about workdone:
https://brainly.com/question/14667371
A car moving 12.2 m/s starts to coast up a frictionless 14.0 degree hill. what is its acceleration?
Answer:
−2.373
Explanation:
Theta=14
ma=-mgsin(theta)
a= -gsin(theta)
a= -9.81sin(14)
a=−2.373
A car moving 12.2 m/s starts to coast up a frictionless 14.0 degree hill. -2.37 m/s² is its acceleration.
What is acceleration ?Acceleration is the rate at which an object's velocity with respect to time changes. They are vector quantities, accelerations. The direction of the net force applied on the item determines the object's acceleration.
An object has positive acceleration if it is accelerating and travelling in the right direction. Positive acceleration was demonstrated in the first example by the speeding car. The acceleration is occurring in the same direction as the car's motion, which is forward and speeding up.
The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). Using this, you may gauge the speed of velocity changes in meters.
θ = 14
Acceleration = -gsinθ
= - 9.8 × sin 14°
= -2.37 m/s²
Thus, A car moving 12.2 m/s starts to coast up a frictionless 14.0 degree hill. -2.37 m/s² is its acceleration.
To learn more about acceleration, follow the link;
https://brainly.com/question/12550364
#SPJ2
if i release one steel ball from the top of a ramp and the other ball from the 40cm mark will they have the same acceleration?
Answer:
Yes, they will also have the same acceleration. Acceleration is controlled by the amount of weight (def. amount of gravitational pull on a given object) that the ball has. For one ball to accelerate quicker than the other, it would need a propulsion element, which it does not.
Explanation:
Help Me With This Question Please.
Thank you UwU
8Ω, 9Ω, xΩ are in series
[tex] \therefore \: R _{1} = 8 + 9 + x = (17 + x)Ω[/tex]
3Ω and 5Ω are in series
[tex] \therefore \: R _{2} = 3+ 5 = 8Ω[/tex]
Now equivalent resistance of R1 and R2 which are parallel in R3 = 6Ω
[See The Attachment]
[tex] \therefore \frac{1}{R _{3}} = \frac{1}{R _{1}} + \frac{1}{R _{2}} \\ \\ \therefore \: \frac{1}{6} = \frac{1}{(17 + x)} + \frac{1}{8} \\ \\ = \frac{1}{17 + x} = \frac{1}{6} - \frac{1}{8} = \frac{1}{24} \\ \\ \therefore17 + x = 24 \\ x = 24 - 17 = 7 \\ x = 7Ω[/tex]
Hope This Helps!!
The value of the resistance X is 7 ohms.
Equivalent resistance in seriesThe equivalent resistance in series is calculated as follows;
R₁ = 8 + 9 + x = 17 + x
R₂ = 3 + 5 = 8
Equivalent resistance in the circuitThe equivalent resistance in the circuit is calculated as follows;
[tex]\frac{1}{R} = \frac{1}{R_1}+ \frac{1}{R_2} \\\\R = \frac{R_1 R_2}{R_1 + R_2} \\\\[/tex]
[tex]R(R_1 + R_2 ) = R_1 R_2[/tex]
6(17 + x + 8) = 8(17 + x)
150 + 6x = 136 + 8x
14 = 2x
x = 7
Thus, the value of the resistance X is 7 ohms.
Learn more about series circuit here: https://brainly.com/question/19865219
What does it mean to discover
the truth in the context of
detective work? What kinds of
truth can be discovered?
Answer:
When the machine indicates a lie, what is the probability that the suspect is really lying? If the machine does not indicate a lie, what is the probability that the suspect is really telling the truth?
My solution if the probability that a test subject is chosen at random from the 200 in fact lie = 80/(80+5)=0.94
Then when 15% of people arrested lie, the probability that the suspect is really lying is 0.15*0.94=0.141
What are some of the major pieces of evidence for the theory of plate tectonics? How does the theory explain these observations?
Answer:
evidence:
- fossils found in different parts of the world were the same
- weather patterns in different parts of the world
- mountain ranged with the same rock types, structures, and ages are now on opposite sides of the atlantic ocean
- coal was found in cold climates where it could not have formed
-scratches from glaciers were found in a desert
- continents fit like a puzzle
- identical rocks of the same type and age found on both sides of the atlantic ocean
Question 3
Which of the following is an example of positive acceleration?
A car increases its speed from 5 m/s to 10 m/s.
A car is traveling at 25 m/s for 5 minutes.
A car is traveling at 25 m/s and begins to slow down as it approaches a stop sign.
A car is in park.
Answer: 1ST OPTION A car increases its speed from 5 m/s to 10 m/s
Explanation:IN 1ST OPTION : because the vel and force are in the same direction therefore acceleration is positive
IN 2ND & 3RD OPTION : the force and velocity in opposite direction so its velocity decreases therefore acceleration is negitive
Х
In which layer of
the soil do we
usually find
loam? to. Topsoil
b. Parent Soil c.
Bedrock d.
ground-soil
Answer:
A. topsoil the answer
Explanation:
I think its a correct answer
Ben and Dan both weigh 600 N. They are doing pull-ups together. Each pull-up is 0.5 meters of distance. How much work do they each do for every pull-up? 300 J 600 J 1200 J 1500 J
Answer:
300 J
Explanation:
Work = (Force)*(distance) = 600 N ∗ 0.5 m = 300 J
Identify the region of the electromagnetic spectrum where the wavelength measurement of 7.5 nm can be found.
We have that the electromagnetic spectrum where the wavelength measurement is 7.5 nm is the X-ray
X-ray
Option D
Question Parameters:
the wavelength measurement of 7.5 nm can be found
Generally, gamma rays has its wavelength around 10pm.
The microwaves has its wavelength around 1cm.
The ultraviolet has its wavelength around the 400nm.
The range of the X-rays is between to 5nm to 10nm.
Hence,the electromagnetic spectrum where the wavelength measurement is 7.5 nm is the X-ray
X-ray
Option D
For more information on Wave
https://brainly.com/question/3004869
CQ
Identify the region of the electromagnetic spectrum where the wavelength measurement of 7.5 nm can be found.
A) Gamma rays
B) Microwaves
C) Ultraviolet
D) X-rays
E) Visible light
A single Oreo cookie provides 53 kcal of energy. An athlete does an exercise that involves repeatedly lifting (without acceleration) a 100-pound weight two-feet above the ground with an energy efficiency of 25%. How many repetitions can she do with the energy supplied from a single Oreo cookie? What happens to the number of repetitions that can be done if the efficiency increases?
The number of times the athlete can lift the weight with single energy supplied by the Oreo cookie is 204 times and this number of times will increase if the efficiency increases.
Energy used by the athleteThe energy used by the athlete is calculated as follows;
E = Fd
where;
F is the applied force = 100 lb weight = 444.82 Nd is the distance = 2 ft = 0.61 mE = 444.82 x 0.61 = 271.34 J
Input energyThe Input energy of the athlete = 53 kcal = 221752 J
Number of times the athlete can lift the weight[tex]E = \frac{0utput \ energy}{1nput \ energy} \\\\0.25 = \frac{n(271.34)}{221752} \\\\271.34n = 55483\\\\n = \frac{55483}{271.34} \\\\n = 204[/tex]
Thus, the number of times the athlete can lift the weight with single energy supplied by the Oreo cookie is 204 times and this number of times will increase if the efficiency increases.
Learn more about efficiency here: https://brainly.com/question/15418098
A wooden supply raft is 2 m wide, 3 m long and 0.200 m deep. The raft and it’s occupants have mass of 700 kg. How deep will the sink below the water when floating?
58.3% of the raft will sink below the water when floating.
Volume of the raftThe volume of the raft is calculated as follows;
V = Lbh
V = 2 x 3 x 0.2
V = 1.2 m³
Density of the raftThe density of the raft is calculated as follows;
ρ = m/v
where;
m is the mass = 700 kgv is the volume = 1.2 m³[tex]\rho = \frac{700}{1.2} \\\\\rho = 583.33 \ kg/m^3[/tex]
Fraction of the raft below the water[tex]f = \frac{\rho\ _{raft}}{\rho \ _{water}} \times 100\%\\\\f = \frac{583.33}{1000} \times 100\%\\\\f = 58.3 \%[/tex]
Thus, 58.3% of the raft will sink below the water when floating.
Learn more about density here: https://brainly.com/question/6838128
The volume
of this ice
would be
considered
what type of
property?
A. a chemical property
B. a rare property
C. a physical property
D. an undetermined property
Question 14 (1 point)
One star has a temperature of 20,000 K and another star has a temperature of 8,000
K. Compared to the cooler star, how much more energy per second (how many times
more energy) will the hotter star radiate from each square meter of its surface?
We have that the more energy per second to radiated by the hotter is mathematically given as
Energy per second=256
Energy per second to radiated
Question Parameters:
One star has a temperature of 20,000 K
and another star has a temperature of 8,000
Generally the equation for the Energy per second is mathematically given as
Energy per second is Proportional to T^4
Where
T=20000/8000
T=4
therefore
Energy per second=4^4
Energy per second=256
For more information on Energy visit
https://brainly.com/question/13439286
A baseball with mass of 0.145 kg is thrown straight down at the ground. At a particular speed, it has a drag force of 0.4 N acting on it. What is its acceleration at that time?
Answer Choices:
−2.8 m/s2
−9.8 m/s2
−12.6 m/s2
−7.0 m/s2
Answer:
It is -7.0 m/s2
Explanation:
Just did it
A baseball of mass 0.145 kg is thrown with the force of 0.4 N then the acceleration of the baseball will be equal to 2.8 m/s².
What is acceleration?The rate of change in an object's velocity concerning time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.
Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.
As per the instructions given in the question,
Force, f = 0.4 N
Mass, m = 0.145 kg
F = ma
a = f/m
a = 0.4/0.145
a = 2.8 m/s².
To know more about Acceleration:
https://brainly.com/question/12550364
#SPJ2