Answer:
10 N
Explanation:
From the diagram,
Applying the principle of moment,
Sum of clockwise moment = sum of anti clockwise moment.
Assuming: the 10 N is placed on the 5 cm mark, F is placed on the 40 cm mark, The 25 N is placed on the 10 cm mark, the 30 N is placed on the 75 cm mark, and the 40 N is placed on the 80 cm mark.
Therefore,
10(50-5)+F(50-40)+40(80-50) = 30(75-50)+25(50-10)
450+10F+1200 = 750+1000
10F+1650 = 1750
10F = 1750-1650
10F = 100
F = 100/10
F = 10 N
A massive truck collides with a less massive car. The force experienced by the truck is ____________ (less than, equal to, greater than) the force experienced by the car. The resulting acceleration of the truck is ____________ (less than, equal to, greater than) the resulting acceleration of the car.
Please answer ASAP
Answer:
equal to; less than
Explanation:
newtons 3rd law says that all forces have equal and opposite reactions so it would be equal to for the first one. but the acceleration depends on the mass of the object and because the truck is more massive, the acceleration would be slower, or less than.
Tính nhiệt lượng cần cung cấp để đun nóng 5kg nước từ nhiệt độ 25 độ C lên 100 độ C. Biết nhiệt dung riêng của nước là 4,18.10^3 J/kg.K
Answer:
Q = 7837500 Joules.
Explanation:
Cho các dữ liệu sau đây;
Khối lượng = 25 kg
Nhiệt độ ban đầu = 25°C
Nhiệt độ cuối cùng = 100°C
Nhiệt dung riêng = 4,18 * 10³ = 4180 J/kg.K
Để tìm nhiệt lượng cần thiết;
Về mặt toán học, nhiệt dung được cho bởi công thức;
[tex] Q = mcdt[/tex]
Ở đâu;
Q là nhiệt dung hoặc nhiệt lượng. m đại diện cho khối lượng của một vật. c biểu diễn nhiệt dung riêng của nước. dt thể hiện sự thay đổi của nhiệt độ.Chuyển đổi:
Nhiệt độ ban đầu = 25°C đến Kelvin = 273 + 25 = 298 K
Nhiệt độ cuối cùng = 100°C đến Kelvin = 273 + 100 = 373 K
dt = T2 - T1
dt = 373 - 298
dt = 75 Kelvin
Thay các giá trị vào phương trình, ta có;
[tex] Q = 25 *4180*75[/tex]
Q = 7837500 Joules.
A small part of a current loop consisting of a very, very large triangular conductor in the x-y plane is shown below, with the current i=39.30 A.
12 10 4 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 x (cm)
Calculate the magnitude of the B-field at point 'p'.
Answer: hello your question is poorly written attached below is the well written question
answer: 4.9 * 10^-5 T
Explanation:
Current ( i ) = 39.30 A
Determine the magnitude of the B-field at Point P
Mag of B-field at Point P = μo*I / 2π*r --- ( 1 )
where : I = 39.30 , μo = 4π * 10^-7 , r = 8*10^(-2)
Input values into equation 1
( 10^-7 * 39.30 ) / ( 8*10^-2 )
∴ Mag of B-field = 4.9 * 10^-5 T
Please help me :))
Which golf ball would hit the surface with the greatest impact: a ball that fell one meter above the surface of the Earth or a ball that fell one meter above the surface of the Moon?
Answer:
the one above the surface of earth
Explanation:
earth has gravity the ball of the moon would float away
can someone please please helppp... thank u <3
Answer:
uniformly accelerated motion
#CARRY ON LEARNING
#IM 100% SURE
#MARK ME AS BRAINLIEST
can someone please help me with this. thank u ❤️
answer:projectile motion
Explanation:
Since gravity acts vertically, there is no acceleration in the horizontal (x) direction. This special type of two-dimensional motion is called projectile motion.
Answer:
.......................
In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm,
then what amount of elastic potential energy will be stored in it?
plz don't spam
answer fast in imp
Answer:
4E
Explanation:
From the question given above, the following data were obtained:
Initial elongation (e₁) = 4 cm = 4/100 = 0.04 m
Initial energy (E₁) = E
Final elongation (e₂) = 0.04 + 0.04 = 0.08 m
Final energy (E₂) =?
The energy stored in a s spring is given by:
E = ½Ke²
Where
E => is the energy
K => is the spring constant
e => is the elongation
From:
E = ½Ke²
Energy is directly proportional to the elongation. Thus,
E₁/e₁² = E₂/e₂²
With the above formula, we can obtain the final energy as follow:
Initial elongation (e₁) = 0.04 m
Initial energy (E₁) = E
Final elongation (e₂) = 0.08 m
Final energy (E₂) =?
E₁/e₁² = E₂/e₂²
E / 0.04² = E₂ / 0.08²
E / 0.0016 = E₂ / 0.0064
Cross multiply
0.0016 × E₂ = 0.0064E
Divide both side by 0.0016
E₂ = 0.0064E / 0.0016
E₂ = 4E
Therefore, the final energy is 4 times the initial energy i.e 4E
A 750 kg car moving at 25 m/s has Kinetic Energy. To stop the car requires work. On snowy roads, the force of friction that can
stop a car reduces to only about 725 N.
a. How much work must be done to stop the car? (Hint: What is the car's kinetic energy?)
b. How far will the car travel before stopping if the only force stopping it is friction between the tires and the road?
a. By the work-energy theorem, the total work required to stop the car is equal to the change in its kinetic energy,
W = 0 - 1/2 (750 kg) (25 m/s)² ≈ -230 kJ
b. The car covers a distance x as it stops such that
W = (-725 N) x ==> x ≈ 320 m
Can some one help me in this one :)
Answer:
The apple
Explanation:
Potential energy can be defined as an energy possessed by an object or body due to its position.
Mathematically, potential energy is given by the formula;
[tex] P.E = mgh[/tex]
Where,
P.E represents potential energy measured in Joules.
m represents the mass of an object.
g represents acceleration due to gravity measured in meters per seconds square.
h represents the height measured in meters.
Basically, the potential energy of any physical object is directly proportional to the mass and height of the object. Thus, an increase in either the mass or height of an object would cause an increase in the potential energy possessed by the object.
Hence, an apple weighing 4 ounces would have more potential energy than a cherry that weighs 1 ounce.
The two waves shown here are the same distance from point X and are traveling toward each other.
An illustration with a crest 2.0 centimeters high traveling to the right and a second 2.0 centimeters trough traveling toward the left toward point X in the material.
What is the amplitude of the resulting wave when the two waves meet at point X?
0.0 cm
1.0 cm
2.0 cm
4.0 cm
Answer:
(C) on edge.
Explanation:
Answer:
2.0
Explanation:
trust the process.
match the given circuit parts to their appropriate functions. write only the letter of the correct answer on your paper
1.source a.an appliance/device that uses electricity
2.switch source like bulbs,computers.
3.wire b.it is a safety device made from materials
4.load that easily melt even before the wires
5.fuse carry too much current.
c.it is where electricity came from like
batteries and generators.
d.it is the pathway of electricity from the
resources to the load .
e.it controls the flow of electricity from the
source. it is used to turn on/off a load.
Answer:
a. Load.
b. Fuse.
c. Source.
d. Wire.
e. Switch.
Explanation:
An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.
Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, fuse, etc.
Matching the given circuit parts to their appropriate functions, we have;
a. Load: an appliance or device that uses electricity source like bulbs, computers, television, radio, etc.
b. Fuse: it is a safety device made from materials that easily melt even before the wires carry too much current.
c. Source: it is where electricity came from like batteries and generators.
d. Wire: it is the pathway of electricity from the resources (source) to the load.
e. Switch: it controls the flow of electricity from the source. It is typically used to turn ON or turn OFF a load.
what is current and si unit
Answer:
The SI unit of current is ampere which measures the flow of electric charge across a surface at the rate of one coulomb per second.
Which of the following statements about
evaporation is FALSE?
a) Evaporation occurs at room
temperature only.
b) Evaporation requires heat energy
and causes cooling.
c) Evaporation occurs only at the
surface.
d) In evaporation the faster molecules
escape the liquid.
a) Evaporation occurs at room
temperature only.
Reason: Evaporation occurs at each and every temp. because of the molecules of the solution have kinetic energy than the others, and thus they will evaporate leaving them behind.If the radius of the equipotential surface of the point charge is 14.3 m at a potential of 2.20 kV, what will be the magnitude of the point charge that generates the potential?
Answer:
The magnitude of the point charge is 3.496 x 10⁻⁶ C
Explanation:
Given;
radius of the surface, r = 14.3 m
magnitude of the potential, V = 2.2 kV = 2,200 V
The magnitude of the point charge is calculated as follows;
[tex]V = (\frac{1}{4\pi \epsilon _0} )(\frac{Q}{r} )\\\\V = \frac{KQ}{r} \\\\Q = \frac{Vr}{K} \\\\Q = \frac{2,200 \times 14.3}{9\times 10^9} \\\\Q = 3.496 \times 10^{-6} \ C\\\\Q = 3.496 \ \mu C[/tex]
Therefore, the magnitude of the point charge is 3.496 μC
In what direction does the force of friction act?
A. Perpendicular to the surface, pointing up
B. Perpendicular to the surface, pointing down
C. Along the surface, in the direction opposite to the motion
D. Along the surface, in the same direction as the motion
Tần số ngưỡng của một kim loại có giá trị X. Nếu tần số của chùm sáng chiếu đến bề mặt katot tăng từ 2X đến 4X thì cường độ dòng quang điện sẽ
Answer:
Năng lượng tăng gấp đôi.
Explanation:
Như chúng ta biết
E = nhf
Năng lượng tỷ lệ thuận với f
Thay đổi về tần số sẽ tương đương với những thay đổi tương tự về Năng lượng
Nếu tần số trở thành hai lần, thì năng lượng sẽ trở thành 2 lần.
state the mode by which heat travels from the cube to the balloons
Answer:
The face of the cube towards A. is bright and shiny and the face towards B is dull black. State with reason the adjustments that should be made on the distances X1 and X2 so that the rate of change of temperature in both balloons is the same.
Explanation:
Convection is the mechanism by which heat is transferred from the cube to the balloon. Convection is the movement of currents inside a liquid or gas that transfers heat energy.
What is Convection?Convection is a method of heat transfer in which a fluid or gas, such as air or water, is moved. A hotter liquid or gas loses density and rises, while a colder, denser liquid or gas replaces it by sinking. Convection is the term used to describe the movement of gases or liquids due to temperature differences.
When the cube is heated, the air around it becomes less dense and rises; On the contrary, the cold air from all around fills the space. As a result, heat energy is transferred from the cube to the balloons via convection currents.
Therefore, Convection is the mechanism by which heat is transferred from the cube to the balloon. Convection is the movement of currents inside a liquid or gas that transfers heat energy.
Learn more about Convection, here:
https://brainly.com/question/4138428
#SPJ2
If youre walking from point a to b, the magnitude of your displacement will always be equal or less than or greater than your distance?
The magnitude of your displacement can be equal to the distance you covered, or it can be less than the distance you covered. But it can never be greater than the distance you covered.
This is because displacement is a straight line, whereas distance can be a straight line, a squiggly line, a zig-zag line, a line with loops in it, a line with a bunch of back-and-forths in it, or any other kind of line.
The straight line is always the shortest path between two points.
can someone please help me with this question... thank u
Answer:
45 degrees
Explanation:
A projectile, in other words, travels the farthest when it is launched at an angle of 45 degrees.
A proton is moving toward a stationary charged particle. Which statement correctly describes an energy change that could occur as the particles get closer?
Answer:
Kinetic energy will be converted into electric potential energy if the stationary particle is positive.
Vector B has components Bx = 6.18 and By = 4.43. Find the magnitude and direction counter clockwise from the positive x-axis.
Answer:
Explanation:
The formula for the magnitude of this resultant vector, which is in Q1, btw, is:
[tex]B_{mag}=\sqrt{6.18^2+4.43^2}[/tex] which gives us, to 3 sig fig's:
7.60 m. Since the resultant vector is in Q1, we don't need to add anything to the angle once we find it to 3 sig fig:
[tex]tan^{-1}(\frac{4.43}{6.18})[/tex] gives us an angle of 35.6 degrees
Calculate the capacitance of a system that stores 9.4 x 10-10 C of charge at
Q
50.0 V. Use C=
AV
O A. 1.9 x 10-11 F
OB. 4.7 x 10-8 F
O C. 5.3 x 1010 F
O D. 2.1 x 107 F
Answer:
A. [tex]1.88\times 10^{-11}\,F[/tex].
Explanation:
By definition of Electric Capacitance, the capacitance of the system ([tex]C[/tex]), in farads, is described by the following formula:
[tex]C = \frac{q}{V}[/tex] (1)
Where:
[tex]q[/tex] - Electric charge, in coulombs.
[tex]V[/tex] - Voltage, in volts.
If we know that [tex]q = 9.4\times 10^{-10}\,C[/tex] and [tex]V = 50\,V[/tex], then the capacitance of the system is:
[tex]C = \frac{9.4\times 10^{-10}\,C}{50\,V}[/tex]
[tex]C = 1.88\times 10^{-11}\,F[/tex]
The correct answer is A.
Which of the following statements is true about electric circuits?
• in a series circuit, the voltage at the source is the same as the voltage measured at each load in the circuit
• when 2 dry cells are connected in series, the positive electrode of one cell is connected to the positive electrode of the other
• electrons leave the source at the positive electrode
• lights in the home are connected in series
• in a parallel circuit the current value from the source is equal to the sum of the current values in each branch of the circuit
Answer:
Explanation:
E: True. The last one is the true statement.
D: False: If home lights were connected in series, when you turned one of them off, they all would go off.
C: The opposite is true. Electrons flow towards the positive pole of a battery. Just as with people, opposites attract.
B: False. What is being described is a parallel circuit. In a series circuit. the positive pole of one battery is connected to the negative pole of the next battery. The other end of each battery is connected to the load.
A: False. There is a voltage drop on each load in series. These drops add together to equal the source voltage.
Loops spaced further apart create a stronger electromagnet. True or False
Answer:
False
Explanation:
Electromagnetic strength is inversely proportional to separation distance
Daniel wants to find out if he can notice the difference in light intensity when he adds some lit candles to a set of 50 lit candles. When he adds 5 candles to the set, he notices the difference in intensity half the time. However, when he adds less than 5 candles to his set, he does not notice any difference in the intensity of light. In this scenario, Daniel's difference threshold for detecting the change in light intensity is ________ lit candles.
Answer:
5
Explanation:
The light intensity may be defined as the strength of the light or the magnitude of its brightness that a source of light can produce.
The light threshold is the minimum intensity of the light that our eye can detect and the ability to adapt to darkness.
In the context, Daniel wishes to find if can notice the difference in the intensity of the light when he add 5 candles to the set of 50 candles.
He noticed that when he added 5 candles, he could notice the difference in the intensity and when he added less than 5 candles to the set of 50 candles he could not detect.
Thus, the difference threshold for Daniel to detect the change in the intensity of the light is 5 candles.
Trong hình dưới, dòng điện I = 10 A rất dài, đặt trong không khí. Những điểm có cường độ từ trường H = 8,0 A/m nằm cách dòng điện một khoảng bao nhiêu cm
Answer:
bombeees.p lele
Explanation:
trong bon
in what ways water helps in germination?
Answer:
Water can spread germs through bacteria.
Explanation:
Bacteria can live in water and can spread to new locations when water is moved.
how can you account for the differences in the entropies of combination of methyl propane (-1465J/mol K) and butane (1465J/mol K)
Explanation:
The change in entropy is a measure of temperature. When the temperature of a compound or a system increases, there will be more randomness in the system.
The boiling point is directly related to the number of carbon atoms but is indirectly proportional to the branching in a hydrocarbon.
Butane and methyl propane, both have 4 carbon atoms.
But, butane has 4 carbon atoms in a straight chain while methyl propane has 3 carbon atoms in a straight chain and 1 methyl substituent which makes it a branched hydrocarbon.
Thus, the boiling point of methyl propane will be less than the butane. Likewise, the pattern in entropies will be seen.
5. What type of chemical reaction is shown?
1 point
2 AgNO3 + CuCl2
-
2 AgCl + 2 Cu(NO3)2
Synthesis
Decomposition
Singe Replacement
Double Replacement
Combustion
Answer:
double Replacement
Explanation:
The mutual replacement of radical and ions between the two compounds or molecules is called double replacement.
General equation : AB+CD = AD +B
what can make an inclined plane more efficient?
Answer:
Efficiency can be increase by using rollers in conjunction with the inclined plane. Wedge. The wedge is an adaptation of the inclined plane. It can be used to raise a heavy load over a short distance or to split a log