Draw a structural formula for the major organic product of the reaction shown below. CH3 - I + 2 CuLi - Consider E/Z stereochemistry of alkenes. - Do not show stereochemistry in other cases - You do not have to explicitly draw H atoms. - Do not include organocopper or inorganic ion by-products in your answer. Draw a structural formula for the major organic product of the reaction shown below
CH3(CH2)eCH2Br + 2 CuLi - Consider E/Z stereochemistry of alkenes. - Do not show stereochemistry in other cases - You do not have to explicitly draw H atoms. - Do not include organocopper or inorganic ion by-products in your answer.

Answer:

Stomata

Explanation:

Stomata are epithelial cell structures found in tree leaves and needles that help promote plant growth and exchange carbon dioxide and water with the surrounding environment.

Stomata are tiny holes in the epidermis of leaves.

Stomata allow for gaseous exchange as well (oxygen and carbon dioxide).

A large area of the Earth that has a similar climate is not considered a biome.

Hence, option D is correct.

Scientists disagree on the exact number of biomes that exist on earth, therefore we will focus on the six most significant ones: freshwater, marine, desert, forest, grassland, and tundra.

To know more about biome here

https://brainly.com/question/1930321

#SPJ4

Answer:

There are 8.30x104-24 atoms of oxygen in 2.50 mol of oxygen gas. There are 7.53x10*23 atoms of oxygen in 2.50 mol of oxygen gas.

x + (360 - x) = 360 * 0.50

where x is the amount of the 60% acid solution.

Solving for x, we get: x = 360 * 0.50 - 360 x = 180

Therefore, you will need to mix 180 L of the 60% acid solution with 180 L of the 15% acid solution to get 360 L of a 50% acid solution.

Acid is a substance that has a pH level of lower than 7.0 and is capable of corroding or dissolving other substances. It is usually found in aqueous solutions and is a highly reactive substance. Examples of acid include sulfuric acid, hydrochloric acid, nitric acid and acetic acid. These are used in a variety of industries such as food production, industrial cleaning and chemical engineering.

To learn more about acid
https://brainly.com/question/26855500
#SPJ4

Given that 1 kWh = 3. 6 MJ and that 1 Btu = 1055 J, It is shown that 1 kWh = 3412 Btu.

1 kilowatt (kWh) = 3.6 mega Joules (MJ)

1 British thermal unit (Btu) = 1055 Joules (J)

As we know that:

1 MJ = 1000000 J

Since

1 kWh = 3.6 x 1000000 J

Calculate for 1 J

1 J = 1 ÷ 1055 Btu

1 kWh = 3.6 x 1000000 x (1 ÷ 1055) Btu

1 kWh  = 3412.32 Btu

So it is calculated that 1 kilowatt (kWh) is equal to 3412 British thermal units (Btu).

You can also learn about British thermal unit (Btu) from the following question:

https://brainly.com/question/19431525

#SPJ4

3 grams of Cu = 6.022 x 10^23 atoms of copper.

Answer:

2.84 × 10^22 atoms

Explanation:

To calculate the number of atoms in 3 grams of Cu, we can use avogadro's constant where:

[tex]1 \: mole = 6.02 \times 10 {}^{23} \: atoms[/tex]

Firstly, we have to calculate the number of moles in 3 grams of Cu. The formula to calculate moles is:

[tex]moles = \frac{mass}{molar \: mass} [/tex]

the mass = 3g and the molar mass = 63.55 (this value can be found in the periodic table)

Substitute the values in formula:

[tex]moles = \frac{3}{63.55} [/tex]

[tex]moles = 0.0472[/tex]

Now use the number of moles to convert to atoms using avogadro's number, where x is the unknown number of atoms we want to find:

[tex]1 \: mole : 6.02 \times 10 {}^{23} \: atoms[/tex]

[tex]0.0472 \: moles : x \: atoms[/tex]

Cross multiply and equate to solve for x:

[tex]1 \times x = 6.02 \times 10 {}^{23} \times 0.0472[/tex]

[tex]x = 6.02 \times 10 {}^{23} \times 0.0472[/tex]

[tex]x = 2.84 \times 10 {}^{22} \: rounded \: to \: 3sf[/tex]

Hence, there are 2.84 × 10^22 atoms in 3 grams of Cu

The pH of a 0.100 M Ba(OH)2 solution is decreased to 6.51 when 15.0 mL of 0.125 M HCl is added. The titration curve of the reaction is a decreasing graph, with the pH decreasing as the volume of the HCl added increases.

Volume of HCl Added (mL) | pH

--------------------------|-----

0.0                   | 12.32

2.5                   | 10.98

5.0                   | 9.81

7.5                   | 8.79

10.0                  | 7.94

12.5                  | 7.18

15.0 (endpoint)       | 6.51

The pH of a 0.100 M Ba(OH)2 solution is decreased to 6.51 when 15.0 mL of 0.125 M HCl is added. The titration curve of the reaction is a decreasing graph, with the pH decreasing as the volume of the HCl added increases.

learn more about solution here

https://brainly.com/question/7932885

#SPJ4

When molecules move faster, they increase their kinetic energy.

What is Kinetic energy?

Kinetic energy is essentially the energy of motion. It is the type of energy that an object possesses as a result of its motion. It is commonly defined as the work required to accelerate a given mass body from rest to its stated velocity. Kinetic energy is directly related to the object's mass and the square of its velocity.

This increase in kinetic energy causes the molecules to vibrate more rapidly, resulting in an increase in temperature. As molecules move faster, they also collide with each other more frequently, leading to more chemical reactions.

To know more about kinetic energy,

https://brainly.com/question/8101588

#SPJ4

Answer:

A-Ideas

Explanation:

Answer: Filterability Test

Explanation: This involves filtering the liquid through a filter paper to see if the particles pass through or are retained on the paper. If the particles pass through, the liquid is likely a solution. If the particles are retained, the liquid is likely a colloid. The technical name for this test is the separation test.

Answer:

One way to determine whether a transparent liquid is a solution or a colloid is to use the Tyndall effect. The Tyndall effect, also known as the Tyndall scattering, is a phenomenon that occurs when a beam of light passes through a colloidal system (a mixture in which one substance is dispersed evenly throughout another). When this happens, the light is scattered by the particles in the colloidal mixture, causing the mixture to appear hazy or cloudy. In contrast, if the transparent liquid is a true solution (one in which the solute is completely dissolved in the solvent), the light will pass through it without being scattered, and the solution will appear clear.

To perform the Tyndall effect test, you would need a light source (such as a flashlight or a laser pointer) and a dark room or area. Place the transparent liquid in a clear container, and shine the light through it. If the light is scattered by the particles in the mixture, it will be visible as a bright beam or spot on the opposite side of the container. If the light passes through the mixture without being scattered, it will appear as a continuous, unbroken beam.

There are other tests that can be used to distinguish between solutions and colloids, such as the filterability test and the centrifugation test. However, the Tyndall effect test is one of the most straightforward and reliable methods for making this distinction.

Explanation:

Pyruvate is converted to lactate in anaerobic conditions by anaerobic glycolysis. During anaerobic respiration, two ATP molecules are produced.

What is the primary step in glycolysis?

The method by which glucose is metabolized to produce energy is known as glycolysis. It generates water, ATP, NADH, and two pyruvate molecules. It doesn't need oxygen to happen because it happens in a cell's cytoplasm. Both in aerobic and anaerobic organisms, it happens.

How is glycolysis referred to?

Gustav Embden, Otto Meyerhof, & Jakub Karol Parnas identified the Embden-Meyerhof-Parnas (EMP) pathway, which is the most typical kind of glycolysis. The Entner-Doudoroff pathway and several heterofermentative & homofermentative pathways are examples of additional pathways that are included in the term "glycolysis."

To know more about glycolysis visit:

https://brainly.com/question/14076989

#SPJ4

In anaerobic circumstances, anaerobic glycolysis converts pyruvate to lactate. Two ATP molecules are created during anaerobic respiration.

The process of converting glucose into energy is known as glycolysis. Water, ATP, NADH, and two pyruvate molecules are produced. It does not require oxygen to occur since it occurs in the cytoplasm of a cell. It occurs in both aerobic and anaerobic species.

The Embden-Meyerhof-Parnas (EMP) route, which is the most common kind of glycolysis, was discovered by Gustav Embden, Otto Meyerhof, and Jakub Karol Parnas. Additional processes included in the word "glycolysis" include the Entner-Doudoroff pathway and numerous heterofermentative and homofermentative pathways.

Here,

Anaerobic glycolysis converts pyruvate to lactate under anaerobic conditions. During anaerobic respiration, two ATP molecules are produced.

To learn more about glycolysis, go to:

brainly.com/question/14076989

#SPJ4

The option that can lead to deviations from Beer's law at constant path length is option A.

Using monochromatic radiation All radiation that was not absorbed by his sample when stray light reaches the detector is transmitted to the detector.

All of the above factors can lead to deviations from Beer's Law if the path length is constant. Optical pathlength refers to the distance that light travels through a sample and is usually kept constant in spectrophotometric experiments in order to accurately measure the sample's absorbance.

Therefore, unless monochromatic radiation is used, the absorbance of the sample may not accurately reflect the concentration of the solute, as different wavelengths of light may be absorbed differently.

For more information on Beer's Law kindly visit to

https://brainly.com/question/18591932

#SPJ4

2.49 x [tex]10^{-4}[/tex] moles is equal to 1.5×[tex]10^{20}[/tex]. The number of moles is equal to the number of molecules divided by Avogadro's number, 6.022×[tex]10^{23}[/tex].

This means that 1.5×[tex]10^{20}[/tex]moles are equal to

1.5×[tex]10^{20}[/tex]/6.022×[tex]10^{23}[/tex]

0.24908×[tex]10^{-3}[/tex]

2.49 x [tex]10^{-4}[/tex] moles.

Avogadro's number: Avogadro's number is a constant used in chemistry to represent the number of atoms or molecules in a mole of a substance. It is equal to 6.022 x [tex]10^{23}[/tex]. Or we can say that Avogadro's number is, the number of units in one mole of any substance (defined as its molecular weight in grams), equal to 6.02214076 × 1023. The units may be electrons, atoms, ions, or molecules, depending on the nature of the substance and the character of the reaction.

Learn more about moles:

https://brainly.com/question/28037816

#SPJ4

12mol ratios can be obtained .

The net ionic equation is a chemical equation that only depicts the elements, compounds, and ions that are directly involved in the chemical process.
As previously stated, we employ net ionic equations to highlight the molecules that change throughout the reaction. It makes it simple to identify the active molecules in a reaction since they are the only ones in the equation.

Fill in the blanks with the balanced molecular equation.
For each substance, write the state (s, l, g, aq).
Break down strong electrolytes into ions (the complete ionic equation).
Remove the spectator ions from both sides of the full ionic equation.

To learn more about mol ratios  to refer:
https://brainly.com/question/29478671
#SPJ1

The reactivity of the element in the periodic table as me move from the left to right in the period it will decreases first and then it will increases.

In the periodic table , for the metals the reactivity of the decreases as we move across the period from left to the right. in the group it will increases as we move from the top to bottom.

In the periodic table for the non metals, the reactivity will increases as we move from left to the right in a period. in the group it will decreases as we move from top to the bottom.

To learn more about reactivity here

https://brainly.com/question/29788210

#SPJ4

The electron rule is broken in the diagram is: (c) Pauli Exclusion Principle.

An electron is a subatomic particle with a negative electric charge. It is found in atoms, and is the main component of electricity. Electrons are incredibly small, measuring only a fraction of a nanometer, and they are around 2000 times lighter than the smallest atom. Electrons are governed by the laws of quantum mechanics and they are move around the nucleus of an atom in discrete orbits. Electrons are responsible for chemical bonding between atoms, and they are essential for the formation of molecules.

To learn more about electron

https://brainly.com/question/25674345

#SPJ1

Answer: We can calculate the energy levels of an atom

Explanation:

Spectral lines tell us how many different energy levels an atom has, and how far apart those energy levels are spaced.This is possible because spectral lines are the result of an excess (emission lines) or deficiency (absorption lines) of observed photons emitted from certain types of matter. The lines are caused by electrons moving between energy levels within individual atoms. Since each element emits it's own unique spectrum, this means that different types of atoms must have a distinct number of electrons in very particular energy levels.

Lithium has a valence of 1, so it will not usually reach an octet in a bond. It tends to form ionic bonds, in which there is only one electron transfer, rather than two or more which would be required to reach an octet.

Lithium is a soft, silver-white metal that is the lightest of all alkali metals. It is a key component in many batteries, and is also used in a variety of other applications. It has a low reactivity, and is relatively stable when exposed to air and water. In its elemental form, Lithium is a highly flammable, corrosive metal that is rarely found in its pure form in nature. It can be found in minerals such as lepidolite and spodumene, and is commonly mined from salt flats and brine pools.

To learn more about Lithium
https://brainly.com/question/15178590
#SPJ4

The substance that he will have the most will be sodium chloride.

More than 70% of the surface of the Earth is covered by seawater, the liquid that makes up the oceans and seas. 96.5 percent of seawater is made up of pure water, 2.5 percent salt, and minor amounts of dissolved inorganic and organic compounds, particles, and a few atmospheric gases.

When a chemist analyzes the composition of a sample and heats it to cause the water to evaporate, he is left with the solid substances that had been dissolved in the sample. Sodium chloride is the most significant salt that is created by ocean water. He next goes through a series of steps to separate the solid materials from one another. The highest substance found in ocean water, according to his measurements, is salt, specifically sodium chloride.

Learn more about sodium chloride

brainly.com/question/9811771

#SPJ4

Increasing the amplitude means you are increasing the energy of a wave option -D is correct answer.

The distance between the wave's base and its crest is its amplitude. It represents the furthest the vibrating body has traveled.

As the vibration of the sound particles increases, the amplitude length also grows. The intensity and energy of the sound particle particles increase as a result. The sound is louder as a result of the increased energy.

The energy increases with increasing amplitude. In conclusion, waves carry energy. Their frequency and amplitude are related to the amount of energy they carry. Energy increases with frequency and amplitude, respectively, as they both rise.

To know more about amplitude visit:

https://brainly.com/question/21037362

#SPJ4

Ice will not melt as we need 16.72 KJ of heat but we have only 3.76 KJ

In thermodynamics, the enthalpy of fusion can be described as the change in its enthalpy resulting from giving energy, heat, to a specific amount to change its state from a solid to a liquid.

Given the reaction is  2 Na (s) + 2 H₂O(l) → 2 NaOH (aq) + H₂ (g)

Given the mass of sodium = 0.470 g

The moles of sodium = 0.470/23 = 0.020 mol

Given that two moles of sodium (Na) release heat = 368 KJ

Heat released by 0.020 mol of sodium (Na) = (368/2) × 0.020 = 3.76 KJ

Given the mass of ice = 50g

The number of moles = 50/18 = 2.78 mol

For melting, one mole of ice heat is required = 6.02 kJ/mol.

For 2.77 mol of ice = 6.02 × 2.78 = 16.72 KJ

But we have only 3.76 KJ of heat therefore, the ice will not melt.

Learn more about enthalpy of fusion, here:

https://brainly.com/question/20897184

#SPJ1

1,3-dichloro-2-butene and 1,1-dichloro-1-butene.Geometrical isomerism, also known as cis-trans isomerism, occurs when a molecule has two or more  structural isomers that differ in the spatial arrangement of the atoms.

Cis-trans isomerism is only possible when the molecule has at least one carbon-carbon double bond. In this type of isomerism, the two isomers differ in the orientation of the substituent groups around the double bond.  1,3-dichloro-2-butene and 1,1-dichloro-1-butene both contain a carbon-carbon double bond and are therefore capable of geometrical isomerism. 1,4-dichlorobenzene does not contain a carbon-carbon double bond and therefore is not capable of geometrical isomerism. 4,5-dimethyl-2-pentyne also does not contain a carbon-carbon double bond and is therefore not capable of geometrical isomerism.

learn more about isomerism here

https://brainly.com/question/14015257

#SPJ4

KI - Ionic compound, KCl -Ionic compound,

C₆H₁₂O₆ - Covalent compound, C₆H₄Cl₂ - Covalent compound,  

KNO₃ - Ionic compound, C₆H₅COOH - Covalent compound

CH₃COOH - Covalent compound, Paraffin wax - Covalent compound

HCl - Covalent compound

Ionic compounds are formed from the interaction between cation ions and anions. A cation of an atom can be described as an electropositive ion and can donate valence electrons. Similarly, anions of an atom are electronegative ions and can accept electrons.

In an ionic compound, there is a complete transfer of electrons in the formation of an ionic bond, therefore, there exists an electrostatic force of attraction between the ions that forms a strong bond.

In a covalent compound, there is the mutual sharing of electrons in the covalent bonds. The shared electrons are hard to give away as nuclei of two atoms together share the electrons and create a bond stronger.

Learn more about the ionic and covalent compound, here:

brainly.com/question/12144907

#SPJ1

The total random kinetic energy of all the molecules in one mole of hydrogen at a temperature of 300k is 3741.3 J.

Given temperature (T) = 300K

The number of moles of hydrogen given are (n) = 1

Molecular weight of hydrogen (M) = 1g

Let the kinetic energy = KE

We know that Kinetic Energy (KE) = 1.5nRT where R = Rydbergs constant

So, KE (total) = 1.5nRT,

the total random kinetic energy is KE = (1.5) x (1) x (8.314) x (300) = 3741.3J/mol

The energy of motion is known as kinetic energy, and it can be observed in the motion of objects or subatomic particles. Examples of kinetic energy in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a charged particle in an electric field.

To learn more about hydrogen click here https://brainly.com/question/11837837

#SPJ4

A decrease in temperature could account for the weakening of hurricanes when they reach the Atlantic Ocean. hence option A is the correct answer.

There must be warm ocean water and wet, humid air in the area for one to form. When humid air flows upward at a low-pressure zone over warm ocean water, water is released from the air, resulting in storm clouds. The air in a hurricane rotates as it rises.

Hurricanes begin with the evaporation of warm seawater, which causes water to be pumped into the lower atmosphere. When converging winds collide and turn upwards, this humid air is pulled aloft.

Hurricanes arise when warm, moist air rises over sea. Cooler air replaces the rising air. Large clouds and thunderstorms continue to form as a result of this process. Because of the Coriolis Effect, these thunderstorms continue to expand and begin to rotate.

Learn more about Hurricane here:

https://brainly.com/question/18221136

#SPJ1

We can use the distance when the meter stick fell before you caught it to figure out your reaction time.  

Meterstick is either a straightedge or foldable ruler which is used to measure a  length, and is especially common in the construction industry. They are often made up of wood or plastic, and often have metal or plastic joints so that they can be folded together. Metersticks are usually divided with lines for each millimeter (1000 per meter) and numerical markings as per centimeter (100 per meter), with the numbers or either in centi- or millimeter.

Formula is the basis: d = 1/2 gt2. In this formula, “d” is equals to the distance the object fell, “g” equals to gravitational acceleration (9.8 m/s2), and “t” is the time the object was falling.

To know more about meterstick here

https://brainly.com/question/29690562

#SPJ4

The mole fraction of ethanol, C2H5OH is 0.076 that can be calculated by using the density of water.

The mole fraction of any solution is described because the ratio of the quantity of moles of that is present withinside the technique to the entire quantity of moles of all of the additives of the solution. Molarity on the other hand is the ratio of moles to the volume.

Molecular mass of ethanol = 46g

The molarity of the solution is 4.6 molal=4 moles in 1L solution

Molecular mass of water =18g

Density of water = 1kg/m3 = 1000g/L

So, mass of water in 1 l solution = 1000g

So moles = 1000/18 = 55.55 moles

Thus, mole fraction of ethanol= 4.6/(4.6+55.6) =0.076

To learn more about mole fraction check the link below:

https://brainly.com/question/1601411

#SPJ4

A vitamin supplement is a dietary supplement containing one or more essential vitamins, typically in the form of a pill, capsule, or tablet.

What are Vitamins?

Vitamins are a group of organic compounds that are essential for normal cellular functioning. They are required for a wide range of bodily functions, such as metabolism, growth, development, and immunity. They can be found naturally in food sources or taken as dietary supplements. There are 13 essential vitamins, including vitamins A, C, D, E, K, and the B vitamins.

The mass of fluorine that can be recovered from the vitamin is 455.9 mg (50.51% of 900 mg). The mass of iron that can be recovered from the vitamin is 444.1 mg (the remaining amount of 900 mg).

To calculate this, we need to use the percent composition formula:

Mass of Element = (Percent Composition/100) x Total Mass

Mass of Fluorine = (50.51/100) x 900 mg = 455.9 mg

Mass of Iron = (100 - 50.51)/100 x 900 mg = 444.1 mg.

To know more about vitamins,

https://brainly.com/question/9348916

#SPJ4

The rate constant of the reaction is 0.56 M⁻¹s⁻¹. The time required to change the concentration of the reactant from 0.900 to 0.100 M is 15.87s.

The half-life of a reaction can be defined as the time needed for a reactant to reach one-half of its initial concentration. For a 1st-order reaction, the half-life is independent of concentration and constant with time.

The half-life period of the second-order reaction can be written as:

[tex]\displaystyle t_{1/2} =\frac{1}{k[A]_o}[/tex]

Given the half-life of the reaction = 2.00 s

The initial concentration of [NOBr]₀ = 0.900 M

The rate constant of the reaction, k = 1/2 ×0.900 = 0.56 M⁻¹s⁻¹

The time required to change concentration from 0.900 to 0.100 M is:

[tex]\displaystyle kt =\frac{1}{[A]} -\frac{1}{[A]_o}[/tex]

0.56 ×t = 1/0.1 -1/0.9

t = 15.87 s

Learn more about half-life period, here:

https://brainly.com/question/1851154

#SPJ1