Draw the structure of the diene that reacts with one equivalent of HBr to form the following two compounds as the only bromoalkene products

Because of its simplicity, comparatively low cost, great sensitivity, and rapid separation, TLC is an extensively used analytical method.

Using a thin stationary phase supported by an inert backing, thin layer chromatography (TLC) is a chromatographic technique used to separate the components of a mixture. It can be carried out on an analytical scale to track the development of a reaction or on a preparative scale to purify minute quantities of a chemical. Similar to all chromatography, TLC works on the premise that a chemical will have varying affinities for the mobile and stationary phases, which will influence how quickly it migrates. TLC aims to produce well-defined, well-separated spots.

Learn more about reaction here-

https://brainly.com/question/28984750

#SPJ4

Answer:

0.25 moles

Explanation:

The fourth and fifth periods contain 18 elements rather than 8 as observed in the second and third period because of the accommodation of 10 additional electrons in the 3d orbital.

The number of orbitals that can be accommodated by s subshell is one, p subshell is three, d subshell is five and f subshell is seven.

In the second and the third period, the 2s subshell is filled with two electrons, 2p subshell with six electrons .So, the second period contains eight elements. The sequence in third period is similar to that of second period with additional filling of 3s and 3p subshell.

In the fourth period, electrons are first filled in the 4s subshell, only after that they can be filled in the 3d subshell. So, fourth period contains 18 elements , which is due to the additional 10 electrons in 3d subshell. This is similar in the case of fifth period also.

To know more about fourth and fifth period elements here

https://brainly.com/question/23277752

#SPJ4

Answer: A

Explanation:

Cooling magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.

This answer was obtained from a credible source after doing some research.

The  temperature differences in the layers of Earth move magma as cooling  magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.

Magma is the molten or semi-molten natural material from which all igneous rocks are formed.Magma is found beneath the surface of the Earth, and evidence of magmatism has also been discovered on other terrestrial planets and some natural satellites.Besides molten rock, magma may also contain suspended crystals and gas bubbles.

Magma is produced by melting of the mantle or the crust in various tectonic settings, which on Earth include subduction zones, continental rift zones,mid-ocean ridges and hotspots. Mantle and crustal melts migrate upwards through the crust where they are thought to be stored in magma chambers or trans-crustal crystal-rich mush zones. During magma's storage in the crust, its composition may be modified by fractional crystallization, contamination with crustal melts, magma mixing, and degassing.

Learn more about magma,here:

https://brainly.com/question/16940653

#SPJ2

The fraction of cobalt-60 atoms remaining after 26.5 years is approximately 0.25 (1/4).

An atom is the smallest unit of matter that still retains its properties. It consists of a nucleus, which is made up of protons and neutrons, surrounded by electrons that orbit the nucleus. Atoms are the building blocks of all matter and can combine to form molecules. Atoms are also constantly in motion and can be found in everything from air to rocks. They are essential for life, as they make up all the molecules that form the cells and organs in the human body.

To learn more atom
https://brainly.com/question/6258301
#SPJ4

22.3 g of NaN₃ are required to fully inflate an airbag of 11.5 L at STP.

Chemical decomposition, also known as chemical breakdown, is the process of breaking down a single chemical entity into two or more components. Chemical breakdown is commonly thought of and characterized as the inverse of chemical synthesis. When one reactant breaks down into two or more products, this is referred to as a decomposition reaction. This is expressed by the following generic equation: AB A + B. The breakdown of hydrogen peroxide to water and oxygen is an example of a decomposition process, as is the breakdown of water to hydrogen and oxygen.

Here,

In airbags, sodium azide decomposes to form sodium and nitrogen gas, which inflates the bag. The decomposition reaction is:

2 NaN₃ ⇒ 2 Na + 3 N₂

We can calculate the mass of NaN₃ needed to produce 11.5 L of N₂ at STP, using the following relations.

At STP, 1 mole of N₂ occupies 22.4 L.

The molar ratio of N₂ to NaN₃ is 3:2.

The molar mass of NaN₃ is 65.01 g/mol.

=11.8*1/22.4*2/3*65.01/1

=118/112*21.67

=22.82 g

22.3 g of NaN₃ are required to fully inflate an airbag of 11.5 L at STP.

To know more about decomposition reaction,

https://brainly.com/question/2462783

#SPJ4

When we work with a chemical that emits hazardous vapors or fumes, the  best way to protect ourself is by using the fumes hood when working with chemicals.

The best way to protect ourself from the chemical fumes or vapor is the work with chemicals in the fumes hood. the fume hood is the ventilation device that limits the exposure of the hazardous fumes or the vapors.

There are several other ways to protect ourself from the chemical fumes are :

These are the some methods use to protect ourself from the chemical fumes or vapors.

To learn more about chemicals here

https://brainly.com/question/14276888

#SPJ4

The carbon atom is in the center of the structure and is surrounded by four hydrogen atoms.

Structure is an organized arrangement of elements, such as components, materials, people, or ideas. It is a way of organizing and arranging the components of a system in order to achieve a desired outcome.

The most likely Lewis dot structure for methane (CH4) is the following:
The carbon atom is in the center of the structure and is surrounded by four hydrogen atoms. Each hydrogen atom has one electron in its outer shell, and the carbon atom has four electrons in its outer shell. All of the atoms are arranged in a tetrahedral shape, which matches the molecular geometry of methane.

To learn more about structure
https://brainly.com/question/28353159
#SPJ4

A meterstick is used to measure things in meters and centimeters.

Meterstick is the measurement tool that measures one meter (hundred centimeters) and is used to measure the things in meters and centimeters. Metersticks are often rectangular and tin, and it is made up of wood or metal. Metal ones are often backed with a 'grippy' material such as cork, to improve the friction. Metersticks are usually divided within the lines for each millimeter (1000 per meter) and the numerical markings as per centimeter (100 per meter), with the numbers either in centi- or millimeter. It is a large ruler used for measuring the size or the distance using the metric scale.

To now more about distance here

https://brainly.com/question/15172156

#SPJ4

The amount of suplher in grams to rpoduce 25.9 kJ energy= 10.95g

Here the reaction is,

S(s) + 2CO(g)  

Hrxn=-75.8 kJ energy.

Answer,

The amount of Sulpher in grams to produce 25.9 kJ energy=  xg=? 

We know that 1mole Sulpher results in the production of \ bigtri angle up Hrxn=75.8 kJ/mol energy.

25.9 kJ of energy produced from how many grams of sulpher= 25.9 kJ / 75.8 kJ/mol = 25.9g/75.8g/mol

                                                                                                                                     =0.34 mol of sulpher

The amount of 0.34 moles of sulpher in grams= Number of moles * Molar mass 

( Molar mss of Sulpher= 32.06g'/mol)

= 0.34mols * 32.06g /mol

=10.95 g

 The amount of suplher in grams to rpoduce 25.9 kJ energy= 10.95g

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ1

Answer:

are u good at geometry math? their are some questions I didn't understand it PLEASE

1.53 × 10⁻⁵ moles of aspartame are present in 4.50 mg of aspartame.

Two amino acids, aspartic acid and phenylalanine, make up the low-calorie sweetener known as aspartame. In addition to being present in tabletop sweetener packets, aspartame is a common component used to substitute sugar in low-calorie foods and beverages.

Here there are 4.50 mg of aspartame.

First, the mass is converted from mg to g by:

1 g = 1000 mg

So, 1 mg = 0.001 g

So, 4.5 mg = 4.5 × 10⁻³ g

Molar mass of aspartame = 294.40 g/mol

So, Number of moles of aspartame = [tex]\frac{Given mass}{Molar mass}[/tex]

or, n = 4.5 × 10⁻³ / 294.3

or, n = 1.53 × 10⁻⁵ moles.

Hence, 4.50 mg of aspartame has 1.53 × 10⁻⁵ moles of aspartame.

To know more about aspartame from the link

brainly.com/question/26727229

#SPJ4

The enthalpy of the reaction from the bond energy is +102 kJ/mol. Option C

We have to note that the enthalpy would have to do with the energy that ahs been absorbed or the energy that is released in a reaction. We know that if there is a release of energy then we can say that the reaction is exothermic but if we have a case where the energy has been taken in then we can say that the reaction in that case can be said to be exothermic.

We can see that the enthalpy of the reaction can be calculated on the basis of the bond energy when we write;

Energy of bonds that are broken - Energy of bonds that are formed.

[4(410) + 2(496)] - [2(805) + 2(460)]

(1640 + 992) - (1610 + 920)

2632 - 2530

= +102 kJ/mol

Hence, by calculation of the enthalpy bof the reaction, we can see that the reaction would absorb about 102 kJ of heat per mole of the reactant as shown.

Learn more about enthalpy:https://brainly.com/question/13996238

#SPJ1

Answer:

Explanation:

They are Covalent networks solids

PBr₃ and Carbon Tetraiodide is a covalent compound. Whereas, KBr and Iron (III) Oxide is an ionic compound.  

Covalent compounds and molecular compounds are those compound where two non-metals, or a non-metal are bonded to each other through the sharing pair of electrons.

PBr₃ are covalent because phosphorous is in the column 3 in periodic system and it has three valence electrons in its outer shell. Therefore, in case of Carbon Tetraiodide carbon and iodide both are non-metals that why they are covalent compounds.

KBr and Iron (III) Oxide both are Iron (III) Oxide because they are formed by the interaction between a metal and non-metal. They will transfer the electrons from positively to negatively charged atoms.

To know more about covalent compound here

https://brainly.com/question/11632372

#SPJ4

The loss of mass can be accounted for by the energy released during the reaction. When the sulfuric acid and sugar mix, the reaction produces carbon dioxide gas, which has a much lower mass than the original reactants. This is because the reaction releases energy as heat, which causes the molecules to break apart and form the gaseous carbon dioxide.

Molecule is the smallest unit of a substance that has all the properties of that substance and is made up of two or more atoms bonded together. Molecules can either be made of elements or a combination of elements and compounds. Molecules can be described as the building blocks of matter, made up of atoms. Atoms are made up of protons, neutrons, and electrons, and the arrangement of these particles determine the type of molecule.

To learn more about molecule

https://brainly.com/question/1078183

#SPJ4

After solving the equation: The half-life for this reaction is 0.693/0.271 = 2.56 s.

Reaction is the response of a system to an external or internal stimulus. It is the way a person or object behaves in response to a change in their environment. Reactions can be physical, chemical, or psychological. Physical reactions involve changes in the body, such as muscle tension, sweating, or heart rate.

The half-life for this reaction is the time it takes for the concentration of molecular iodine to decrease by a factor of 2, or for half of the original amount of molecular iodine to react. This can be calculated using the equation:

T1/2 = 0.693/k

where k is the first-order rate constant.

Therefore, the half-life for this reaction is 0.693/0.271 = 2.56 s.

To learn more about reaction
https://brainly.com/question/25769000
#SPJ4

As with any laboratory work, adequate facility design, operation, and monitoring, as well as excellent work practices, are necessary to protect laboratory staff against the hazard.

Both degrees of protection are based on the principle of ALARA (as little as reasonably possible) exposure. Electricity Risks By adopting adequate measures, the electrocution dangers of electrically powered instruments, tools, and other equipment are nearly completely minimized, therefore their use in the hazard need not represent a serious risk. You need the correct sort of scales if you want to weigh laboratory samples accurately. To accurately weigh the lab samples, for instance, you may use an analytical balance. The reliability of the weighing device will determine how accurate and precise the findings are.

To learn more about laboratory please click on below link

https://brainly.com/question/14428286

#SPJ4

Zinc, phosphorus and oxygen are elements contained in dental cement (Zn₃(PO₄)).

Dental cements have a wide range of dental and orthodontic applications. Common uses include temporary tooth restoration, lining cavities to protect the pulp, sedation or isolation, and cementation of fixed prosthetic devices.

A cement-retained bridge is simply a dental device that is permanently fixed in the mouth to restore the mouse's function and aesthetics and to prevent many of the consequences of tooth loss that affect the immediate aftermath of losing natural teeth.

Learn more about prosthetic devices visit:

brainly.com/question/30158376

#SPJ4

the element that was reduced in this redox reaction is Fe

A redox reaction, also known as an oxidation-reduction or redox reaction, involves the exchange of electrons between chemical entities (the atoms, ions, or molecules involved in the reaction). Redox reactions occur everywhere; they are involved in the burning of fuels, the rusting of metals, and even the processes of photosynthesis and cellular respiration.Some species experience oxidation, or the loss of electrons, while others experience reduction, or the gain of electrons, during a redox process. Take rust, which results from the interaction of iron and oxygen:The third selection from the options presented above is the right response. The element that was reduced in the described redox reaction was Fe, or iron. It now has a neutral charge after having its +3 charge lowered.

Learn more about  redox reaction.

brainly.com/question/13293425

#SPJ4

The total pressure in the flask is 1.320 times the total pressure.

Pressure is an important concept in chemistry, as it affects the physical behavior of gases and solids, and the rates at which reactions occur. Pressure is a measure of the force applied to an area, typically expressed in units of atmospheres (atm), or kilopascals (kPa).

Methane :

Mole fraction of methane = (231 mL / 2.00 L) = 0.1155

Partial pressure of methane = 0.1155 * Ptotal

Chlorine:

Mole fraction of chlorine = (907 mL / 2.00 L) = 0.4535

Partial pressure of chlorine = 0.4535 * Ptotal

Products:

Mole fraction of products = (75.9% com) = 0.759

Partial pressure of products = 0.759 * Ptotal

Total pressure = 0.1155*Ptotal + 0.4535*Ptotal + 0.759*Ptotal = 1.320*Ptotal

To learn more about pressure
https://brainly.com/question/25736513
#SPJ4

Newton's law of motion that act upon the vehicles at the point of impact is the second law of motion.

Newton's second law of motion states that the force applied to an object is directly proportional to the rate of change of momentum that is produced. Mathematically, we have;

F = m·v - m·u/Δt

Where;

m = The mass of the object

v = The final velocity of the object

u = The initial velocity of the object

Δt = The duration of motion of the object during change in velocity

Therefore, given that the mass, 'M', of the truck is larger than the mass, 'm', of the minivan, where the time of change in velocity Δt, and the initial and final velocities of both automobiles are the same such as in a sudden stop, the garbage ruck will exert more force than the minivan, and therefore, the garbage truck has a greater initial momentum before the automobiles are brought to a stop.

To learn more about momentum check the link below:

https://brainly.com/question/25849204

#SPJ4

10.0g of CaBr2 contains 0.05 mol according to the equation mole(n) = mass / molar mass (10.0g CaBr2 x 1 mol CaBr2 / 199.88 g CaBr2 = 0.05 mol)

The mole, represented by the symbol mol, is the SI unit of material quantity. One mole is made up of precisely 6.022*1023 elementary components. The Avogadro number, NA, as expressed in mol1, is the fixed numerical expression of the Avogadro number.

The weight in grams of 1 mole of a certain substance is its molar mass. The atomic mass of the chemical unit, expressed in atomic mass units, determines the mass of a substance (amu).

To know more about mole visit :

https://brainly.com/question/28239680

#SPJ4

The  statement which best explains why the atomic theory developed efficiently is that scientists had used creativity and the scientific method in their investigations regarding the atom.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

Answer: the answer is B

Explanation: just did it hope it helps

When calcium carbonate is heated, it breaks down into the components  calcium oxide and carbon dioxide.

What do you mean by calcium carbonate?

Calcium carbonate is a chemical compound that has the formula CaCO3. It is a common mineral found in rocks as calcite and aragonite, and it is the main component of pearls and the shells of marine organisms, snails, and eggs. Calcium carbonate is a component of agricultural lime that is formed when calcium ions in hard water react with carbonate ions to form limescale. It's commonly used in medicine as a calcium supplement or an antacid, but too much of it can be dangerous.

25 g of calcium carbonate contains 25/100 x (40 + 12 + 3 x 16) = 25/100 x 88 = 22 g of calcium and 12 g of carbon.

Hence, mass of carbon dioxide produced is 12 g.

To know more about calcium carbonate,

https://brainly.com/question/29331980

#SPJ4

16.5 g is the mass of sodium chloride that must be dissolved in the same mass of X to produce the same depression at freezing point.

Avogadro's number (6.022 x 1023) of molecules (or formula units) make up one mole of a substance (ionic compound). The mass of 1 mole of a chemical is indicated by its molar mass. It provides you with the number of grams per mole of a substance, to put it another way.

ΔT = Kc*W*i

Kc = cryoscopy constant of the solute X

W = molality of the solution

i = van't Hoff factor, For organic molecules, such as alanine, i = 1.

n = 45.8/89.09

n = 0.5141 mol

W = 0.5141/1.2 = 0.4284 mol/kg

So, Kc of X is:

4.10 = Kc*0.4284*1

Kc = 9.57 °C.kg/mol

So, if now sodium chloride is added to X, and the temperature change is the same, and i = 1.82:

4.10 = 9.57*W*1.82

W = 0.2354 mol/kg

The number of moles of the solute is then:

W = n/1.2

0.2354 = n/1.2

n = 0.2825 mol

The molar mass of sodium chloride is 58.44 g/mol, thus the mass is the molar mass multiplied by the number of moles:

m = 58.44*0.2825

m = 16.5 g

To know more about cryoscopy constant visit:

brainly.com/question/29908903

#SPJ4

The molecular formula of a compound that has an empirical formula of CH₂O and a molar mass of 120.12 g/mol is C₄H₈O₄.

A molecular formula shows the number of different types of atoms that are present in a molecule whereas an empirical formula represents the simplest whole number ratio of the different atoms present in a molecule.

Given,

empirical formula= CH₂O

molar mass = 120.12 g/mol

To find: molecular formula

we know that,

atomic mass of carbon= 12 g/mol

atomic mass of hydrogen= 1g/mol

atomic mass of oxygen= 16 g/mol

molar mass of CH₂O

= (12+ 1×2 + 16) g/mol

=30 g/mol

therefore, molecular formula

⇒(CH₂O )n = 120.12

⇒30 n= 120.12

⇒n=120.12/30

⇒n= 4.004

⇒n≈4

Thus,

(CH₂O )n = (CH₂O )4 =C₄H₈O₄

Hence, molecular formula is C₄H₈O₄

To know more about molecular formula here

https://brainly.com/question/20366021

#SPJ4

The complete lewis structure is shown in the below figure by adding lone pairs and formal charges.

Assign the valence electrons to each atom as dictated by the periodic table placing one electron at each compass direction and then pairing them only after the first four until you have place all of the atom’s valence electrons. (See the Roman numeral above the group/column it is in.)

Arrange the remaining atoms around the central atom and join them to the central atom by a single bond. The more electronegative atoms are typically farther away from the center and attaching hydrogen last is advised.

Lone electrons (not lone pairs) indicate an ability to form more covalent bonds, resulting in either double or triple bonds. Their presence or the lack of a full octet on any atom indicates there is a better Lewis structure.

To know more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

Answer:

The last one is true.