Total service costs allocated to Advertising is $1,500,000, Total service costs allocated to Circulation is $1,100,000, the total costs of the revenue-generating departments after the allocations are $3,500,000 and $4,100,000 for Advertising and Circulation departments respectively
Given: Total service cost = $900,000, Advertising Department cost = $2,000,000 and Circulation Department cost = $3,000,000
To allocate the support department costs to the revenue-generating departments, we need to use the algebraic method.
Using the algebraic method, we can get the following equations:
Administration Department cost = a x Advertising Department cost + b x Circulation Department costHuman Resources Department cost = c x Advertising Department cost + d x Circulation Department cost
Now, let's use the given information to find the values of a, b, c and d.a = 0.2b = 0.4c = 0.3d = 0.1
Now, let's allocate the service department costs to the revenue-generating departments using the above equations:
Administration Department cost = 0.2 x $2,000,000 + 0.4 x $3,000,000= $800,000Human Resources Department cost = 0.3 x $2,000,000 + 0.1 x $3,000,000= $700,000
Total service costs allocated to Advertising = $800,000 + $700,000= $1,500,000Total service costs allocated to Circulation = $800,000 + $300,000= $1,100,000Using the answer to part (e), we can calculate the total costs of the revenue-generating departments after the allocations.
Total cost of Advertising Department = $2,000,000 + $1,500,000= $3,500,000Total cost of Circulation Department = $3,000,000 + $1,100,000= $4,100,000Therefore, the total costs of the revenue-generating departments after the allocations are $3,500,000 and $4,100,000 for Advertising and Circulation departments respectively.
Learn more about revenue: brainly.com/question/16232387
#SPJ11
Kelly Inc. purchased equipment for $420,000, the useful life of the equipment is 10 years and the residual value is $20,000. Kelly Inc. estimates that the equipment will run for 800,000 hours. In year 1, Kelly used the equipment for 20,000 hours. What is the depreciation expense that Kelly Inc. will record using the units of production method for year one?
Kelly Inc. will record a depreciation expense of $10,000 using the units of production method for Year 1.
First, let's calculate the total depreciation cost over the useful life of the equipment:
Total depreciation cost = Initial cost - Residual valueTotal depreciation cost = $420,000 - $20,000Total depreciation cost = $400,000Next, let's calculate the depreciation cost per hour:
Depreciation cost per hour = Total depreciation cost / Total estimated hours of useDepreciation cost per hour = $400,000 / 800,000 hoursDepreciation cost per hour = $0.50Finally, let's calculate the depreciation expense for Year 1 by multiplying the depreciation cost per hour by the number of hours the equipment was used:
Depreciation expense for Year 1 = Depreciation cost per hour * Hours of use in Year 1Depreciation expense for Year 1 = $0.50 * 20,000 hoursDepreciation expense for Year 1 = $10,000Learn more about depreciation expense here:
https://brainly.com/question/30650039
#SPJ11
What personal experiences have you had as a health insurance consumer?
Answer: Lack of a full view of the customer, healthcare decision making, and ... of respondents who had group coverage but were able to select their own plans. ... this opportunity, we outline specific steps, private insurance driven environment like the United States or ... as defined by the individual in a care encounter
Explanation:
When developing research program, there are several criteria for an effective customer research program. Among several, pick THREE different criteria and discuss with each (you also need to provide an example for each of three criteria)
An effective customer research program has a set of criteria that it must meet. Here are three criteria that are essential for any effective customer research program:1. Goal-OrientedA customer research program must have specific objectives that it seeks to achieve.
These goals must be established before any research is conducted. They should guide the selection of the research method and the data collection techniques.A good example is a company that wants to introduce a new product into the market. Its customer research program's goal could be to determine whether its target customers would buy the product.2. Valid and Reliable DataThe data collected through a customer research program must be valid and reliable. Validity refers to the accuracy of the data collected, while reliability refers to the consistency of the data collected over time.
A good example is a company that wants to know how its customers feel about the quality of its products. It can use customer feedback to collect data on customer satisfaction.3. Representative SampleA customer research program must have a representative sample of the target population. The sample size must be large enough to provide a high level of confidence in the results.A good example is a company that wants to know how its customers feel about a particular product. The company can survey customers.
To know more about program visit:
https://brainly.com/question/30613605
#SPJ11
Consider the model that satisfies MLR.4 y= BO+B1X1+...+BKXK+u Which of the following describes the regression specification error test (RESET)? Check all that apply The test does not pick up certain kinds of neglected nonlinearities by adding quadratic terms. A model with many explanatory variables will use up too many degrees of freedom. To implement RESET, the researcher must add at least three functions of the fitted values in an expanded regression The test shows that no nonlinear functions of the independent variables, when added to the original model, should be significant.
The regression specification error test shows that no nonlinear functions of the independent variables when added to the original model, should be significant. Option D is the correct option.
The regression specification error test (RESET) is a diagnostic test used to detect the presence of neglected nonlinearities in a regression model. It helps determine if the model adequately captures the relationship between the dependent variable and the independent variables.
The test does not pick up certain kinds of neglected nonlinearities by simply adding quadratic terms, implying that the inclusion of quadratic terms may not fully capture the nonlinear relationships in the data. To implement RESET, the researcher needs to add at least three functions of the fitted values in an expanded regression.
Learn more about regression specification error tests at
https://brainly.com/question/29311273
#SPJ4
Monroe Inc is an all-equity firm with 1,000,000 shares outstanding It has $6,250,000 of EBIT, and EBIT is expected to remain constant in the future. The company pays out all of its earings, so earnings per share (EPS) equal dividends per share (DPS) and its tax rate is 25%. The company is considering issuing $10,000,000 of 10.00% bonds and using the proceeds to repurchase stock. The nel free rate is 6.0%, the market risk premium is sok, and the firm's beta is currently 10. However, the CFO believes the beta would rise to 1330 if the recapitaliration occurs. Assuming the shares could be repurchased at the price that existed prior to the recapitalization, what would the price per share be following the recapitalization? (Hint: PEPS/r, because EPS-DPS) a 1672 5700 O 14067 d4 $3113 Poulsen Industries is analyzing an average-risk project, and the following data have been developed Unit sales will be constant, but the sales price should increase with inflation. Fixed costs will also be constant, but variable costs should rise with inflation. The project should last for 3 years. Under the new tax law, the equipment for the project is eligible for 100% bonos depreciation, so it will be fully depreciated atto. At the end of the project's life, the equipment will have no salvage value. No change in net operating working capital (NOWC) would be required for the project. This is just one of many projects for the firm, so any losses on this project can be used to offset gains on other firm projects. The marketing manager does not think it is necessary to adjust for Inflation since both the sales price and the variable costs will rise at the same rate, but the CFO thinks an inflation adjustment is required. What is the difference in the expected NPV if the inflation adjustment is made versus if it is not made? Do not round the intermediate calculations and round the final answer to the nearest whole number WACC 100% Equipment cost $225,000 Units sold 46,000 Average price per unit, Year 1 $29.00 Fixed op. cost $150,000 Variable op. costunit. Year 1 $23.20 Expected annual inflation rate 5.00% Tax rate 25.0% 26 517838 12213 Od 126.046 0510.366
The price per share after recapitalization is $11.12.
Initial price per share = EPS/r
where r = free rate of return + beta (market risk premium) = 6% + 1.0 (sok) = sok + 6% = (10+6)% = 16%
Tax = 25%
Total Earnings = EBIT (1 - Tax rate)
Total Earnings = $6,250,000(1 - 0.25)
Total Earnings = $4,687,500
EPS = Total earnings / No. of shares
EPS = $4,687,500/1,000,000
EPS = $4.69
Price per share = EPS / r
Price per share = $4.69/16%
Price per share = $29.31
After recapitalization the new beta = 1.33
Price per share after recapitalization = EPS / r
Price per share after recapitalization = (EPS x current beta) / (r + risk premium)
Price per share after recapitalization = ($4.69 x 1.0.33) / (16% + sok)
Price per share after recapitalization = $1.55 / sok
Price per share after recapitalization = $11.12
Learn more about recapitalization at:
https://brainly.com/question/32743482
#SPJ11
Answer is the manufacturing strategy that has the shortest/fastest lead time (i.e., the manufacturing strategy that will provide product to customers the quickest). Air Make-to-Order Assemble-to-Order Truck Pipeline .::: Rail Make-to-Stock Water Engineer-to-Order
Make-to-stock is the manufacturing strategy that has the shortest / fastest lead time (i.e., the manufacturing strategy that will provide product to customers the quickest).
Make-to-stock (MTS) is a manufacturing method in which product demand is taken into account when scheduling and planning production. Products produced during the subsequent production period are used to fulfill orders placed during one manufacturing period.
Businesses use the common production method known as "Make to Stock" (MTS) to produce large quantities of goods in response to anticipated consumer demand. In order to deliver finished goods to customers at the time of purchase, MTS mandates that businesses maintain finished goods inventories.
For more information about Make-to-stock, click here:
https://brainly.com/question/29214371
#SPJ4
Pls solve wtih showing the formulas and explain Q3(30 P). A firm sells the same material with two separate payment plans. 1. According to the 1st payment plan, the payment period is l2 months, each monthly payment is 10 837 000 TL, and an interim payment(Ara Odeme) of 12 million TL is required at the end of the 6th month. 2. In the 2nd payment plan, the payment period is 18 months, each monthly payment is 7 965 000 TL and an interim payment (Ara Odeme) of 36 million TL is required at the end of the 12th month. Annual nominal interest rate for both options is 60%. Which payment plan would you recommend? In payments, discrete compound interest is applied.
Payment plan would be recommended is payment plan 1 as it results in a lower cost for the same material, considering the annual nominal interest rate of 60%.
The two payment plans and determine which one is more favorable, we need to calculate the total amount paid under each plan and compare them.
Payment Plan 1:
Payment period: 12 months
Monthly payment: 10,837,000 TL
Interim payment at the end of the 6th month: 12,000,000 TL
The total amount paid under this plan, we'll consider the interim payment as a regular monthly payment for the first 6 months.
Total amount paid = (Monthly payment × Payment period) + Interim payment
= (10,837,000 × 12) + 12,000,000
= 130,044,000 + 12,000,000
= 142,044,000 TL
Payment Plan 2:
Payment period: 18 months
Monthly payment: 7,965,000 TL
Interim payment at the end of the 12th month: 36,000,000 TL
Similarly, we'll consider the interim payment as a regular monthly payment for the first 12 months.
Total amount paid = (Monthly payment × Payment period) + Interim payment
= (7,965,000 × 18) + 36,000,000
= 143,370,000 + 36,000,000
= 179,370,000 TL
Now, we need to compare the total amounts paid under each plan. Since the annual nominal interest rate is 60%, we'll use the discrete compound interest formula to calculate the present value of each payment plan and compare them.
Present Value (PV) = Payment / (1 + (Interest Rate / Number of Payments)) Number of Payments
Payment Plan 1:
PV1 = (10,837,000 / (1 + (0.6 / 12))¹²) + (12,000,000 / (1 + (0.6 / 12))⁶)
= 10,837,000 / (1.05)¹² + 12,000,000 / (1.05)⁶
= 10,837,000 / 1.82212 + 12,000,000 / 1.3401
= 5,951,702.85 + 8,955,224.78
= 14,906,927.63 TL
Payment Plan 2:
PV2 = (7,965,000 / (1 + (0.6 / 12))¹⁸) + (36,000,000 / (1 + (0.6 / 12))¹²)
= 7,965,000 / (1.05)¹⁸ + 36,000,000 / (1.05)¹²
= 7,965,000 / 1.8533 + 36,000,000 / 1.425
= 4,302,138.49 + 25,263,157.89
= 29,565,296.38 TL
Based on the present values calculated, we can see that Payment Plan 1 has a lower present value (14,906,927.63 TL) compared to Payment Plan 2 (29,565,296.38 TL). Therefore, we would recommend Payment Plan 1 as it results in a lower cost for the same material, considering the annual nominal interest rate of 60%.
To know more about interest rate click here :
https://brainly.com/question/30237215
#SPJ4
An additional cost from selecting... An additional cost from selecting a certain course of action is an Mutiple Choice O O O Discount cost Pocket co Sur cost COL Period cost
An additional cost from selecting a certain course of action is an Incremental cost.
An incremental cost is an increase or decrease in total costs as a result of a specific activity or investment decision. The incremental cost concept is used in cost accounting to help businesses make decisions based on the net impact of one option over another.
The incremental cost of a product is the additional cost that is incurred when making one more unit. It includes the cost of materials and labor, as well as any other costs associated with the production process. Incremental costs can also refer to the additional costs associated with expanding a business, such as hiring new employees or purchasing new equipment.
Learn more about incremental cost here: https://brainly.com/question/25811981
#SPJ11
For the following transactions, prepare the entries that would be recorded in the general fixed assets account group for the city of Evert. a. The city purchased property costing $1,300,000, with three-fourths of the cost allocated to a building. b. A mansion belonging to the great-granddaughter of the city’s founder was donated to the city. The land cost the original owner $600, and the house was built for an additional $50,000. At the time of donation, the property had an estimated fair value of $550,000, of which $330,000 was allocable to the land. The property was accepted and is to be used as a park and a museum. c. A central fire station, financed by general obligation bonds, was two-thirds complete at year-end with costs to date of $800,000 that were recorded in the capital project fund. d. A new fire engine was purchased for $165,000. The city traded a used fire engine originally purchased for $100,000. The trade-in value was $25,000. Both engines were purchased from general property tax revenues. e. A new street was completed at a cost of $250,000, which is to be charged, through the capital projects fund’s special assessments, against property owners in the vicinity. The city follows GASB recommendations and records infrastructure assets. f. Evert developed computer software valued at $70,000 with an estimated useful life of seven years.
Here are the entries that would be recorded in the general fixed assets account group for the city of Evert for the following transactions:
The Journal Entriesa. Property purchased:
Dr. General Fixed Assets – Buildings 975,000
Cr. Cash 1,300,000
b. Property donated:
Dr. General Fixed Assets – Land 330,000
Dr. General Fixed Assets – Buildings 220,000
Cr. Donated Capital 550,000
c. Central fire station:
Dr. Capital Projects Fund 800,000
Cr. General Fixed Assets – Buildings 800,000
d. New fire engine:
Dr. General Fixed Assets – Vehicles 140,000
Cr. Cash 165,000
Cr. Accumulated Depreciation – Vehicles 25,000
e. New street:
Dr. Capital Projects Fund 250,000
Cr. Special Assessments Receivable 250,000
f. Computer software:
Dr. General Fixed Assets – Software 70,000
Cr. Cash 70,000
These entries are based on the following assumptions:
The city follows GAAP accounting standards.
The city has a separate capital projects fund for tracking the costs of capital projects.
The city uses the straight-line method of depreciation for all fixed assets.
The city has a useful life of seven years for computer software.
Read more about depreciation here:
https://brainly.com/question/29894489
#SPJ4
You have been asked by your CEO to evaluate, analyse and calculate commonly used ratios relating to a company’s profitability, liquidity, solvency and management efficiency.
Requirement:
Complete the balance sheet and sales data (fill in the blanks), using the following financial data:
Debt/net worth 60%
Acid test ratio 1.2
Asset turnover 1.5 times
Day sales outstanding in accounts receivable 40 days
Gross profit margin 30%
Inventory turnover 6 times
Balance sheet
Cash ________ Accounts payable ________
Accounts receivable ________ Common stock RM15,000
Inventories ________ Retained earnings RM22,000
Plant & equipment ________
Total assets ________ Total liabilities ________
& capital
Sales ________
Cost of goods sold
To complete the balance sheet and sales data, we need the values for Common stock, Retained earnings, Average Daily Sales, and Average Inventory. Using the provided financial ratios, we can calculate the missing values and fill in the blanks.
How to calculate financial ratios effectively?To complete the balance sheet and sales data, we will use the provided financial ratios and information. Let's calculate each item step by step.
1. Debt/Net Worth Ratio:
Debt/Net Worth Ratio = Total Liabilities / Net Worth
Given that Debt/Net Worth Ratio is 60%, we can set up the following equation:
60% = Total Liabilities / Net Worth
2. Acid Test Ratio:
Acid Test Ratio = (Cash + Accounts Receivable) / Current Liabilities
Given that the Acid Test Ratio is 1.2, we can set up the following equation:
1.2 = (Cash + Accounts Receivable) / Accounts Payable
3. Asset Turnover:
Asset Turnover = Sales / Total Assets
Given that the Asset Turnover is 1.5 times, we can set up the following equation:
1.5 = Sales / Total Assets
4. Day Sales Outstanding (DSO) in Accounts Receivable:
DSO = (Accounts Receivable / Average Daily Sales)
Given that the DSO is 40 days, we can set up the following equation:
40 = (Accounts Receivable / (Sales / 365))
5. Gross Profit Margin:
Gross Profit Margin = (Gross Profit / Sales) * 100%
Given that the Gross Profit Margin is 30%, we can set up the following equation:
30% = (Gross Profit / Sales)
6. Inventory Turnover:
Inventory Turnover = Cost of Goods Sold / Average Inventory
Given that the Inventory Turnover is 6 times, we can set up the following equation:
6 = (Cost of Goods Sold / (Inventories / 365))
Now, let's solve these equations and complete the balance sheet and sales data.
Solution:
1. Debt/Net Worth Ratio:
Given Debt/Net Worth Ratio is 60%.
Let's assume Net Worth (Common stock + Retained earnings) = X.
Then, Total Liabilities = 60% of X.
We can assign values to Common stock and Retained earnings to solve for Total Liabilities and Net Worth.
Common stock: RM15,000
Retained earnings: RM22,000
Net Worth (X) = Common stock + Retained earnings
X = RM15,000 + RM22,000
X = RM37,000
Total Liabilities = Debt/Net Worth Ratio * Net Worth
Total Liabilities = 60% * RM37,000
Total Liabilities = RM22,200
2. Acid Test Ratio:
Given Acid Test Ratio is 1.2.
Let's assume Accounts Payable = Y.
Then, Cash + Accounts Receivable = 1.2 * Accounts Payable.
We can assign a value to Accounts Payable to solve for Cash and Accounts Receivable.
Accounts Payable: Y
Cash + Accounts Receivable = 1.2 * Y
3. Asset Turnover:
Given Asset Turnover is 1.5 times.
Let's assume Total Assets = Z.
Then, Sales = 1.5 * Total Assets.
We can assign a value to Total Assets to solve for Sales.
Total Assets: Z
Sales = 1.5 * Z
4. Day Sales Outstanding (DSO) in Accounts Receivable:
Given DSO is 40 days.
Let's assume Average Daily Sales = W.
Then, Accounts Receivable = 40 * (W / 365).
We can assign a value to Average Daily Sales to solve for Accounts Receivable.
Average Daily Sales: W
Accounts Receivable = 40 * (W / 365)
5. Gross Profit Margin:
Given Gross Profit Margin is 30%.
Let's assume Sales = S.
Then, Gross Profit = 30%
of Sales.
We can assign a value to Sales to solve for Gross Profit.
Sales: S
Gross Profit = 30% * S
6. Inventory Turnover:
Given Inventory Turnover is 6 times.
Let's assume Average Inventory = V.
Then, Cost of Goods Sold = (V / 365) * 6.
We can assign a value to Average Inventory to solve for Cost of Goods Sold.
Average Inventory: V
Cost of Goods Sold = (V / 365) * 6
By solving these equations, we can determine the values of the missing items in the balance sheet and sales data. Please provide the values for Common stock, Retained earnings, Average Daily Sales, and Average Inventory so that I can complete the calculations.
Learn more about: financial ratios
brainly.com/question/31531442
#SPJ11
The role of the Australian Government in ensuring that the market meets the criteria of a mixed economy like Australia is necessary in supporting a healthy economy. Discuss the 4 roles of the Australian Government through which they can make sure that the market meets the criteria of a Mixed Economy like Australia.
The four roles of the Australian Government through which they can ensure that the market meets the criteria of a Mixed Economy like Australia are regulation, taxation, redistribution of income, and monetary policy.
The government uses these tools to promote efficiency, equity, and economic growth in the market. Regulation is the government's role in setting and enforcing rules and standards in the market. This ensures that businesses and individuals comply with regulations, such as product safety standards, environmental standards, and competition laws. Taxation is another tool that the government uses to ensure that the market meets the criteria of a mixed economy. The government collects taxes from businesses and individuals and uses the revenue to provide public goods and services such as healthcare, education, and infrastructure.
Redistribution of income is the government's role in providing assistance to low-income families and individuals. This is achieved through programs such as welfare, social security, and unemployment benefits. These programs help to reduce income inequality in the market. Monetary policy is another tool used by the government to ensure that the market meets the criteria of a mixed economy. The government uses monetary policy to regulate the money supply in the market, which can influence interest rates, inflation, and economic growth. By controlling the money supply, the government can stabilize the economy and promote growth.
Know more about Mixed Economy, here:
https://brainly.com/question/30334310
#SPJ11
Integrative Leverage and risk Firm R has sales of 100,000 units at $1.99 per unit, variable operating costs of $1.68 per unit, and fixed operating costs of $6,030. Interest is $10,020 per year. Firm W has sales of 100,000 units at $2.59 per unit, variable operating costs of $1.02 per unit, and fixed operating costs of $62,600. Interest is $17,500 per year. Assume that both firms are in the 40% tax bracket. a. Compute the degree of operating, financial, and total leverage for firm R. b. Compute the degree of operating, financial, and total leverage for firm W. c. Compare the relative risks of the two firms. d. Discuss the principles of leverage that your answers illustrate.
To compute the degree of operating, financial, and total leverage for Firm R and Firm W, we need to understand the definitions of these leverages.
Operating leverage measures the extent to which a company's fixed costs are used in its cost structure. It is calculated as the ratio of fixed costs to total costs. A higher operating leverage indicates a larger proportion of fixed costs relative to variable costs.
Financial leverage measures the use of debt in a company's capital structure. It is calculated as the ratio of debt to equity. Higher financial leverage means a company has a higher proportion of debt financing compared to equity financing.
Total leverage combines both operating leverage and financial leverage. It measures the overall riskiness of a company and is calculated as the product of the operating leverage and financial leverage.
a. For Firm R:
- Sales = 100,000 units * $1.99 per unit = $199,000
- Variable operating costs = 100,000 units * $1.68 per unit = $168,000
- Fixed operating costs = $6,030
- Degree of operating leverage = Fixed costs / (Sales - Variable costs)
= $6,030 / ($199,000 - $168,000)
= 6.03 / 31,000
= 0.0001945
- Interest expense = $10,020
- Degree of financial leverage = Debt / Equity
As the question doesn't provide the debt and equity amounts, we cannot calculate the financial leverage.
- Degree of total leverage = Degree of operating leverage * Degree of financial leverage
Since we don't have the financial leverage, we cannot calculate the total leverage.
b. For Firm W:
- Sales = 100,000 units * $2.59 per unit = $259,000
- Variable operating costs = 100,000 units * $1.02 per unit = $102,000
- Fixed operating costs = $62,600
- Degree of operating leverage = Fixed costs / (Sales - Variable costs)
= $62,600 / ($259,000 - $102,000)
= 62,600 / 157,000
= 0.398
- Interest expense = $17,500
- Degree of financial leverage = Debt / Equity
Since the question doesn't provide the debt and equity amounts, we cannot calculate the financial leverage.
- Degree of total leverage = Degree of operating leverage * Degree of financial leverage
Since we don't have the financial leverage, we cannot calculate the total leverage.
c. Comparing the relative risks of the two firms:
From the given information, we can observe that Firm R has lower fixed operating costs, lower interest expense, and lower variable operating costs compared to Firm W. This suggests that Firm R has a lower level of risk as its costs are relatively lower.
d. The principles of leverage illustrated in this scenario include:
- Operating leverage: It shows the impact of fixed costs on a company's cost structure. A higher operating leverage amplifies the impact of changes in sales on a company's profitability. Firm R has lower fixed costs, resulting in lower operating leverage.
- Financial leverage: It represents the use of debt in a company's capital structure. Higher financial leverage magnifies the impact of changes in interest expense on a company's earnings. The financial leverage calculations were not provided, so we cannot analyze it further.
- Total leverage: It combines both operating leverage and financial leverage to determine the overall riskiness of a company. Since the financial leverage information is missing, we cannot calculate the total leverage and assess the overall risk profile of the firms accurately.
To know more about Information visit-
brainly.com/question/30101285
#SPJ11
anyone able to do these??
1. If a company uses more debt and less equity in its capital structure, then A. Expected returns to stockholders will increase and riskiness will increase B. Expected returns to stockholders will dec
If a company uses more debt and less equity in its capital structure, then expected returns to stockholders will increase, and riskiness will increase.
What happens to expected returns to stockholders and riskiness when a company uses more debt and less equity in its capital structure?Expected returns to stockholders will increase, and riskiness will increase.
When a company increases its use of debt and decreases its use of equity in its capital structure, it is referred to as financial leverage or financial gearing. This means that the company relies more on borrowed funds (debt) to finance its operations instead of relying on funds raised from shareholders (equity).
By incorporating more debt, the company benefits from the tax-deductible interest payments associated with borrowing. This can result in higher returns to stockholders. The company's profits are distributed among a smaller equity base, which can amplify the returns for equity investors. Therefore, expected returns to stockholders tend to increase.
However, increasing debt also increases the company's financial risk and financial leverage. Debt comes with fixed interest payments and repayment obligations, which can pose a higher risk if the company experiences financial difficulties or faces challenges in meeting its debt obligations. This increased riskiness arises from the fact that the company has higher financial obligations and a lower equity buffer to absorb potential losses. Therefore, riskiness also tends to increase when a company employs more debt and less equity in its capital structure.
It's important to note that the impact of changes in capital structure on expected returns and riskiness can vary depending on the specific circumstances and market conditions. Therefore, thorough analysis and consideration of the company's financial position, industry dynamics, and risk tolerance are crucial when making decisions about capital structure.
Learn more about returns to stockholders
brainly.com/question/21050054
#SPJ11
Comcast company is mainly operating within the cable industry. Use your macroeconomics analysis to explain the negative effects to why the company may not be successful in the near future.
There are several macroeconomic factors that could have negative effects on Comcast's success in the near future within the cable industry:
1. Technological Disruptions: The cable industry is facing significant technological disruptions, with the rise of streaming services and over-the-top content providers. Consumers are increasingly opting for more flexible and affordable alternatives to traditional cable TV, which poses a threat to Comcast's subscription-based revenue model. The company may struggle to adapt to these technological changes and could face declining customer base and revenues.
2. Changing Consumer Preferences: Consumer preferences are shifting towards on-demand and personalized content. Cable companies like Comcast often offer bundled packages with a wide range of channels, which may not align with the preferences of modern consumers who prefer targeted content. This could result in customer churn and difficulty in attracting new subscribers.
3. Intense Competition: The cable industry is highly competitive, with both traditional and new players vying for market share. Comcast faces competition not only from other cable providers but also from satellite TV providers, telecommunications companies offering TV services, and streaming platforms. Intense competition can lead to price wars, reduced profit margins, and challenges in retaining customers.
4. Regulatory Environment: The cable industry is subject to various regulations and policies that can impact the operations and profitability of companies like Comcast. Changes in regulations, such as net neutrality rules or content licensing agreements, can significantly affect the company's ability to offer competitive services or increase costs of operation.
5. Economic Downturn: Comcast's success is also tied to the overall economic conditions. During an economic downturn, consumers may cut back on discretionary spending, including cable subscriptions. Reduced consumer spending can lead to lower revenues for Comcast and impact its profitability.
It is important to note that while these factors may pose challenges to Comcast's success in the near future, the company has the potential to adapt and evolve its business model to remain competitive. Continued investment in new technologies, diversification of services, and effective marketing strategies can help Comcast mitigate these negative effects and position itself for long-term success.
About EconomicIn general, economics has an understanding as a science that studies how humans fulfill their life needs by using available resources. All forms of business and human effort in meeting the needs of life in order to obtain life welfare.
Learn More About Economic at https://brainly.com/question/28210218
#SPJ11
Lime electric scooters ("e-scooters") are available for rent at various locations in major U.S. cities via a smartphone app. When Lime introduced the e-scooters in the U.S., the price per minute was 15 cents (plus $1 to unlock the scooter for each ride). Recently, the price has risen to 25 cents per minute (plus $1 to unlock). There are a number of e-scooter competitors in the U.S. market, all priced about the same as Lime. Interestingly, almost all of the scooters are built in one company in China, Ninebot. Although the scooters are essentially the same, there are cosmetic differences to differentiate the various brands Lime, Spin, etc.). Suppose a start-up company in the U.S. decides to create a new brand of rental e-scooters, Zing. Zing scooters will also be produced by Ninebot. Zing's plan is to have the e-scooters available in the same places the other brands are located and to have a smartphone app (because they are targeting current users of Lime and other brands), but plans to differentiate itself by charging a lower price per minute for rentals. How successful do you think Zing will be with this strategy? Begin your answer with either Successful or Unsuccessful, then briefly explain the reasoning behind your decision.
Zing, a new brand of rental e-scooters, is planning to differentiate itself from other competitors by charging a lower price per minute for rentals. This paper aims to discuss the strategy's chances of success or failure.
The new start-up company in the U.S., Zing, has come up with a plan to differentiate itself by offering rental e-scooters at a lower price per minute for rentals. However, other rental companies such as Lime and Spin also offer rental e-scooters for rent at approximately the same price. Zing's plan to lower prices might be a short-term success to attract new users. However, it might fail to survive in the long run due to increasing competition.
As they offer the same product with a different brand name and price, Zing's potential users might get attracted towards it in the beginning. However, in the long term, other rental companies might come up with new strategies to compete and survive in the market. Thus, it might get difficult for Zing to sustain in the long term, and the success of the strategy would depend on various factors such as market share, advertising, promotion, and unique features of the product offered. Therefore, Zing might initially be successful with its strategy of offering rental e-scooters at a lower price per minute for rentals but might not sustain in the long term due to increased competition.
To know more about Zing visit:
https://brainly.com/question/971762
#SPJ11
Question 57 Angie incurs the following costs in undertaking a prescribed course of education related to her current occupation in the 2020/21 income year: Tuition fees (excluding HECS fees), books and
Angie can deduct $750 under section 8-1 ITAA97. Angie incurs the various costs for her prescribed course of education.
Tuition fees (excluding HECS fees), books, and stationery: $800
Child-minding fees: $200
To determine the amount Angie can deduct under section 8-1 of the Income Tax Assessment Act 1997 (ITAA97), we need to consider the rules and limitations related to self-education expenses.
Under section 8-1 of the ITAA97, a taxpayer can deduct expenses incurred for self-education if the education is directly related to their current occupation. However, certain conditions and limitations apply.
One of these limitations is section 82A of the Income Tax Assessment Act 1936 (ITAA36), which states that the first $250 of self-education expenses are non-deductible.
In Angie's case, her total expenses for the prescribed course of education amount to $1,000. After applying section 82A of the ITAA36, the first $250 is not deductible. Therefore, Angie can deduct the amount exceeding $250, which is $1,000 - $250 = $750.
To know more about costs click here
brainly.com/question/14566816
#SPJ11
a project with only one sign change on its net cash flow is a non-conventional cash flow series. True or False
False. A project with only one sign change on its net cash flow is a conventional cash flow series, not a non-conventional cash flow series.
In conventional cash flow series, the initial investment is followed by a series of positive cash inflows and a single negative cash outflow representing the project's termination or salvage value. This single sign change from positive to negative distinguishes it as a conventional cash flow pattern.
On the other hand, a non-conventional cash flow series involves multiple sign changes in its cash flows, with alternating positive and negative values. Non-conventional cash flows can be more complex and challenging to analyze compared to conventional cash flows due to the irregular pattern of cash inflows and outflows.
Learn more about conventional cash flow
https://brainly.com/question/29750787
#SPJ4
Which of the following will give a more "accurate" representation of the population from wh ple has been taken? A) A large sample based on the convenience sampling technique 3) A small sample based on simple random sampling C) A small cluster sample D) A large sample based on simple random sampling tion 10: Researchers claim that the taxes paid are not perceived as same according to the "Region of the d States" people live? Help the researcher. Which statistical test can we use to help the researcher? i-squared test of independence rtial correlation B) Pearson Correlation D) Discriminant Analysis ion 11: You are interested in finding whether people who lost a close friend tend to help others more often. ill perform a(n): -squared test of independence ependent sample t-test B) Multiple regressions D) One-way ANOVA on 12: Which of the following sampling methods is the best way to select a group of people for a study re interested in making statements about the larger population? Candom Sampling B) Convenience Sampling D) Purposive Sampling uota Sampling n 13: Mr.Tümer would like to contrast the Research Methods students' confidence in passing the cours FA' at the time of the course enrolment and in the middle of the semester. Which test would you advi o perform? al correlation B) Frequency analysis sample t-test D) Independent sample t-test 14: Mr.Ali, Director of Dounya Industrial Sales, is concerned by a deteriorating sales tre ly, the number of industrial customers is stable at 1,500, but they are purchasing less each year. = staff to search for causes of the downward trend by surveying all 1,500 industrial customers. For set of 1,500 industrial customers is D) a statistic
A more "accurate" representation of the population from whole has been taken a large sample based on simple random sampling (option D).
The term that is used to denote the "degree of closeness" with which a sample represents a population is the accuracy of the sample. The sample is thought to be more precise when it is a reflection of the population from which it has been drawn.In general, the large sample based on simple random sampling is the best way to select a group of people for a study who are interested in making statements about the larger population. It's one of the most widely used statistical techniques that can provide a more accurate representation of the population.
Simple random sampling is a statistical technique that is commonly used to select a subset of individuals from a larger population. In this method, each person in the population has an equal chance of being selected, and the selection process is entirely random. It's important to note that simple random sampling is only effective when the sample size is large enough to be representative of the population. Therefore, it can be concluded that a large sample based on simple random sampling technique will give a more "accurate" representation of the population from which the sample has been taken. The correct option is D.
For more about population:
https://brainly.com/question/15889243
#SPJ11
Part (a) Can hydro energy be stored? What about other renewables? Why does it matter?
Part (b) What are the similarities and differences between Feed-in-Tariffs and Renewable Portfolio Standards? Give an example of a location where FIT is used and one where there is an RPS.
The main similarity between the two is that they both aim to incentivize the adoption of renewable energy. The difference is that FITs incentivize energy producers, while RPS incentivizes energy consumers.
Part (a)Yes, Hydro energy can be stored. However, when it comes to other renewables, it's not that simple. Energy storage is a critical aspect of any renewable energy system because it enables excess energy generated during times of high supply to be stored and then utilized later when there is an increased demand for energy.Renewable energy sources such as wind and solar can be stored in batteries, but the expense of installing batteries is prohibitively high for widespread adoption at present.
Hydroelectricity can be used to store energy by keeping water in a reservoir and then releasing it through turbines to generate electricity when it is required. This process is known as "pumped hydro storage."It's crucial to store excess energy because it could be used to make up for energy shortages. The energy storage system may also help to reduce the carbon footprint by avoiding the usage of non-renewable energy sources.
Part (b)Feed-in Tariffs (FIT) and Renewable Portfolio Standards (RPS) are both mechanisms that encourage the adoption of renewable energy. Despite the fact that they have different approaches, they both have the same purpose.FITs pay a fixed rate per kWh for any renewable electricity that is fed back into the grid.
The amount paid for the feed-in tariff is generally higher than the rate charged for the energy, making renewable energy projects more profitable. An example of a location where FITs are used is Germany.Renewable portfolio standards (RPS) are regulatory policies that require utilities to produce a certain percentage of their electricity from renewable sources. The state of California in the United States is one example of where RPS is used.
For more about renewable energy:
https://brainly.com/question/17373437
#SPJ11
determine the edge connectivity and the vertex connectivity of each graph.
To determine the edge connectivity and vertex connectivity of a graph, we need to analyze the graph's structure and identify the minimum number of edges or vertices whose removal will disconnect the graph.
Edge Connectivity:
Edge connectivity measures the minimum number of edges that need to be removed to disconnect a graph. To find the edge connectivity, we perform the following steps:
Identify the minimum cut sets: A cut set is a set of edges whose removal disconnects the graph.
Vertex Connectivity:
Vertex connectivity measures the minimum number of vertices that need to be removed to disconnect a graph. To find the vertex connectivity, we follow these steps:
Identify the minimum cut sets: A cut set is a set of vertices whose removal disconnects the graph.
Learn more about vertex connectivity here:
brainly.com/question/14016048
#SPJ1
a company reports average inventory of $91 million. its annual inventory turns are 9.7 per year. what is the company's annual cost-of-goods sold in million dollars (i.e., write 1.00 for $1,000,000)? ((specify your answer to 2 decimal places.)
A company reports average inventory of $91 million and annual inventory turns are 9.7 per year. The company's annual cost-of-goods sold will be $882.7 million dollars.
Inventory turnover measures management efficiency to use its inventory to produce goods.
Cost of goods sold is an direct expense used for producing and selling goods by the firm.
To calculate cost of goods sold:
Average Inventory turnover = 9.7 per year (Given)
Average Inventory = $ 91 million
Inventory turnover period = Cost of sales / Average Inventory
9.7 = COS / $ 91 million
COS = 9.7 * $ 91 million
= $ 882.7 million
Therefore, the cost cost of sale is $882.7 million.
To learn more about Cost of goods sold:
https://brainly.com/question/13499038
#SPJ4
an author can register his or her copyright application with the
Answer:
You can submit a copyright application through www.copyright.gov or through a paper application. I think answer would be registration record
Explanation:
Answer:
US Copyright Office
Explanation:
"Under what conditions will a related diversification strategy not be a source of competitive advantage for a firm?"
Instructions
Please Write a paper addressing the question of related diversification strategies and competitive advantage. Your paper should be at least three hundred words long.
Step 1 - Re-read the section in the text on the types of corporate diversification.
Step 2 - Choose a position in response to the question.
Step 3 - Research real-world examples to support your position.
The web is a valid resource for this research.
Don't be afraid to change your position if your research supports a different position than the one you initially took.
Step 4 - Write a paper answering the question. Your paper should:
Be at least three hundred words long
Use APA style
Cite all the sources you used
Provide examples to support your position
Please refer to the Publication Manual of the American Psychological Association, 6th ed. (commonly referred to as APA format) when formatting research papers, crediting sources, and creating reference lists.
If a company is able to utilize its current assets, skills, and strengths to generate synergies and broaden its range of offerings, pursuing a connected diversification strategy can provide a competitive advantage.
How feasible is this strategy?Nonetheless, this is not necessarily true in all circumstances. A related diversification strategy may not provide a competitive advantage in certain circumstances.
If the organization lacks the essential resources, abilities, or skills needed to succeed in the emerging market.
If the resources, capabilities and skills of the company do not match the requirements of the new market.
If the firm faces significant competition in the new market.
If the firm's management team is not capable of managing a diversified business.
Real-world examples of firms that have failed to achieve competitive advantage through related diversification include:
General Electric (GE) in the 1990s.
Tyco International in the 2000s.
Vivendi Universal in the 2000s.
These companies made considerable investments in new ventures that were unrelated to their main businesses. Despite their efforts, they failed to attain the intended benefits of combining forces and maximizing opportunities. Consequently, they had to bear noteworthy monetary setbacks and were compelled to relinquish numerous of their freshly acquired enterprises.
Ultimately, a strategy involving diversification within a related field can provide a competitive edge for a company, but only if it is implemented effectively. Nonetheless, this is not necessarily true. Several factors can hinder a company's ability to gain a competitive edge through related diversification.
Read more about diversification here:
https://brainly.com/question/18647091
#SPJ4
Consider the five-element framework of emotional intelligence listed in the article (self-awareness, self-regulation, motivation, empathy, social skills). Which of these characteristics do you possess naturally? Which characteristic do you lack? Which of the two characteristics do you feel is more important in the development of EI? Why?
Out of the five-element framework of emotional intelligence which includes self-awareness, self-regulation, motivation, empathy, and social skills, I possess empathy and self-regulation naturally while lacking motivation.
The element of motivation is what I lack, and this has been a significant problem for me as it can lead to reduced productivity. I have realized that motivation is the key driver to achieve one's goals and objectives, and it's one of the elements of emotional intelligence that needs development.
There is no denying that all the elements of emotional intelligence listed in the article are essential for personal and professional growth I consider motivation and self-awareness the two most crucial characteristics in developing emotional intelligence. Motivation is fundamental as it helps individuals to stay focused and committed to their goals despite the challenges they face in life. Without motivation, one can become complacent and lose interest in achieving their objectives. On the other hand, self-awareness is equally crucial as it helps individuals to understand their emotions and how they affect their behavior towards others.
To know more about Emotional intelligence visit:
https://brainly.com/question/32076877
#SPJ11
Plant assets are used in business and have useful lives that extend over more than one accounting period. True False
The given statement is true. Plant assets are tangible assets used in business operations that have useful lives extending over more than one accounting period.
These assets, such as buildings, machinery, vehicles, and equipment, are not meant for immediate consumption or resale but are utilized to generate revenue and support ongoing operations. They are recorded on the balance sheet and are subject to depreciation, which allocates the cost of the asset over its useful life. The recognition of plant assets recognizes their long-term nature and acknowledges that their value is expected to be realized over time rather than in a single accounting period. This treatment aligns with the accrual accounting principle, which aims to match revenues and expenses appropriately to provide an accurate representation of the company's financial position and performance.Therefore, the given statement is true. Plant assets are tangible assets used in business operations that have useful lives extending over more than one accounting period.
For more such questions on plant assets:
https://brainly.com/question/28191905
#SPJ11
22. (3.5 pts) You are given the following data. Selected Age-to-Age Reported LDFs: 12-24 24-36 36-48 48-60 60-Ultimate 2.500 1.600 1.250 1.120 1.000 AVG $ 100,000 AY 2017 Reported Losses evaluated as of Dec 31, 2020 $ 60,000 AY 2017 Paid Losses evaluated as of Dec 31, 2020 (a) (3 pts) Estimate AY 2017 IBNR Reserves as of Dec 31, 2020 using the Loss Development (Chain-Ladder) Method. (b) (0.5 pts) Derive AY 2017 Case Reserves as of December 31, 2020.
(a) Using the Loss Development (Chain-Ladder) Method, the AY 2017 IBNR Reserves as of Dec 31, 2020 can be estimated as $20,000. (b) AY 2017 Case Reserves as of December 31, 2020 can be derived as $80,000 using the following formula: Case Reserve = Incurred Loss - Paid Loss.
Explanation:
(a) The Loss Development (Chain-Ladder) Method is used to estimate the IBNR reserves. The method assumes that the ratio of losses for a given period to the losses for the prior period is constant. The formula used to calculate the IBNR reserves is: IBNR Reserve = (Latest LDF for each origin year) * (Latest cumulative loss for each origin year) - (Paid Losses). Therefore, the AY 2017 IBNR Reserves as of Dec 31, 2020 can be estimated as $20,000 using the following formula: (1.000*1.120*1.250*1.600*2.500) * $100,000 - $60,000 = $20,000.
(b) Case Reserves can be derived by subtracting the Paid Loss from the Incurred Loss. Therefore, AY 2017 Case Reserves as of December 31, 2020 can be derived as $80,000 using the following formula: Case Reserve = Incurred Loss - Paid Loss = $100,000 - $60,000 = $80,000.
Know more about Chain-Ladder here:
https://brainly.com/question/29253318
#SPJ11
Morris Ronaldo runs a small sole proprietorship that has one truck that is used solely in the business. It had a cost of $70,000 but a tax basis of only $19,000. However, it has a fair value of $22,000. It is traded for a similar truck with a list sales price of $80,000. To make the sale, the dealer reduced the price by $24,000 as a trade-in allowance for the old truck. Morris paid the $56,000 difference in cash. This exchange qualifies for section 1031 like-kind nonrecognition of gain treatment. Group of answer choices True False
Answer:
The answer is "$75,000".
Explanation:
Please find the complete and correct question in the attached file.
This is a swap of assets of the same. Its basis of the new building for tax purposes is equal to a base granted. There is indeed a $19,000 tax structure on the old tractor. That business only pays 56 000 dollars in cash. That's the price of 80,000 dollars less than the exchange allowance of 14,000 dollars. This government is offering up $19,000 and $56,000 in cash. That amount is the gross yielded tax basis or $75,000, that's the basis of the commercial new property.
29 As at January 2019 Gilles had unused TFSA contribution room of $35,000 and a TFSA balance of $73,000. During 2019 he withdrew $5,000. No other transactions were made. What was his TFSA contribution as of January 2020? A $79,000 B $46,000 C $41,000 D $35,000
His TFSA contribution as of January 2020 will be $35,000.
The correct answer to the given question is option D.
As at January 2019, Gilles had unused TFSA contribution room of $35,000 and a TFSA balance of $73,000. During 2019 he withdrew $5,000. No other transactions were made. We can calculate his TFSA contribution as of January 2020 by taking his unused TFSA contribution room of $35,000 from January 2019, adding his withdrawal of $5,000 from 2019, and adding his unused contribution room of $6,000 for 2019.
Therefore, his TFSA contribution room as of January 2020 will be $46,000. However, he had a TFSA balance of $73,000 on January 2019, which means that he didn’t contribute any amount for that year. So his contribution amount was $0. Therefore, his unused contribution room of $35,000 will be rolled over to January 2020.So his TFSA contribution room as of January 2020 will be $35,000. The correct answer is option D. $35,000.
For more such questions on contribution, click on:
https://brainly.com/question/27773337
#SPJ11
What is horizontal segmentation?
Answer: Horizontal segmentation try's to understand what customers want and then to deliver it.
Too Young, Inc.,has a bond outstanding with a coupon rate of 7.0 percent and semiannual payments. The yield to maturity is 6.0 percent and the bond matures in 20 years. What is the market price if the bond has a par value of $1,000? a. $1,125.51 b. $1,106.25 c. $1,104.55
d. $1.115.57 e. $1,107.71
Too Young, Inc.,has a bond outstanding with a coupon rate of 7.0 percent and semiannual payments. The yield to maturity is 6.0 percent and the bond matures in 20 years. The market price if the bond has a par value of $1,000 is Option e $1,107.71
When investing in bonds, it's important to understand how their prices are determined in the market. In this case, we have a bond from Too Young, Inc. with specific characteristics: a coupon rate of 7.0%, semiannual payments, a yield to maturity of 6.0%, and a maturity period of 20 years. The task is to calculate the market price of the bond given these details and a par value of $1,000.
To calculate the market price of the bond, we need to use the concept of present value. The present value of a bond is the discounted value of all its future cash flows, including both the coupon payments and the par value received at maturity.
In this case, since the bond pays semiannual coupon payments, we need to adjust the formula accordingly.
The present value of the bond can be calculated using the following formula:
Market Price = (C / (1 + r/2)) + (C / (1 + r/2)²) + ... + (C / (1 + r/2)ⁿ) + (M / (1 + r/2)ⁿ)
Where:
C = Coupon payment
r = Yield to maturity (expressed as a decimal)
n = Number of periods (in this case, number of semiannual periods)
M = Par value
Let's break down the calculations step by step:
Calculate the coupon payment:
The coupon payment is given as a percentage of the par value. In this case, the coupon rate is 7.0%, and the par value is $1,000. Therefore, the coupon payment is (7.0% * $1,000) / 2 = $35.
Calculate the number of periods:
Since the bond pays semiannual coupon payments and has a maturity of 20 years, the total number of periods is 20 * 2 = 40.
Calculate the present value of the coupon payments:
We need to discount each semiannual coupon payment to its present value. The discount rate is the yield to maturity, which is given as 6.0% in this case. We divide the yield to maturity by 2 because the payments are semiannual.
Present value of coupon payments = (35 / (1 + 0.06/2)) + (35 / (1 + 0.06/2)²) + ... + (35 / (1 + 0.06/2)⁴⁰)
Calculate the present value of the par value:
The par value is received at maturity and needs to be discounted to its present value using the same discount rate.
Present value of par value = 1000 / (1 + 0.06/2)⁴⁰
Calculate the market price:
The market price of the bond is the sum of the present value of the coupon payments and the present value of the par value.
Market Price = Present value of coupon payments + Present value of par value
After performing these calculations, we can compare the result with the given options to find the correct answer.
By applying the formula and performing the calculations, the market price of the bond is $1,107.71 (option e).
To know more about Market Price here
https://brainly.com/question/1757801
#SPJ4