In studying effects of collisions between galaxies, astronomers usually make use of space telescopes.
Astronomy deals with the study of outer space. The study focuses on planets and other celestial bodies. Generally telescopes are used to study outer space. The particular type of telescope that is used depends on the need.
In studying effects of collisions between galaxies, astronomers usually make use of space telescopes.
Learn more: https://brainly.com/question/556195
Alison observes that when she injects additional gas molecules into a container of gas, the number of collisions in the container (and the pressure inside) increases. She then increases the volume of the container just enough to restore it to its original pressure. Which of the following laws best describes what Alison observed?
A. Amonton's Law
B. Avogadro's Law
C. Boyles Law
D. Charles's Law
E. Dalton's Law
Answer:
Explanait it is not d
When Brian first sorted out his thoughts, he figured this was the first day after the crash and what did he think would happen next?
It should be noted that when Brian first sorted out his thoughts, the first thing that he thought would happen next is that he would probably be rescued that day.
It should be noted that in Chapter 5 of Hatchet, Brian wakes up in the forest and then, he realized that he was desperately thirsty.
When Brian first sorted out his thoughts, he figured this was the first day after the crash and that he would probably be rescued that day. He believed that he was going to wither up and die if he doesn't get anything that he'll drink.
Learn more about excerpts on:
https://brainly.com/question/21400963
The last layer in layered design is _____________. Object Process None of the options Atoms Sub process
The last layer in the layered design is system layer so none of the above is the correct option.
Robotic Process Automation is a software technology that make use of some programs of computer to copy or mimic the behaviors of human when it has access with them. They been use effectively and ensure the work is perfectly done.
There are layers in the Robotic process automation but the last layer is System layer.
They can handle high volume of tasks.
The lowermost layer is associated with individual screen interactions. The lowermost layer in the layered design of Robotic process automation is the component layer or system layer . The Robotic Process Automation and this form technology is in robots creation.
Therefore, The last layer in layered design Is System layer so none of the above is the correct option.
Learn more about Robotic process automation from the link below.
https://brainly.com/question/41671370
Jeremy left his bike outside overnight. When he woke up in the morning, there were water drops on the seat. When he went to ride his bike after lunch, he saw the water drops had disappeared. Which statement best describes what happened to the water?
A. The energy from the sun caused the water drops to condense.
B. The energy from the sun caused the water on the seat to boil.
C.The energy from the sun cooled the water, causing it to evaporate.
D.The energy from the sun heated the water, causing it to evaporate.
Answer:
D
Explanation:
a,b, and c wouldn't cause the reaction that Jermey expirenced
002 (part 1 of 2) 10.0 points
1.5 mol HCl and 3.7 mol NaOH react accord-
ing to the equation
HCl + NaOH → NaCl + H2O.
If the limiting reactant is HCl, calculate the
amount of NaCl formed.
1. 1.9
2. 2
3. 1.1
4. 1.5
5. 1
6. 1.8
7. 1.2
8. 1.3
9. 1.4
10. 1.7
Answer in units of mol.
mol,
Answer:
4) 1.5 mol
Explanation:
Well, the equation is already balanced and the mole to mole ratio of reactants and products are all 1. So if the limiting reactant is HCl and you have 1.5 mol, you do the mole to mole ratio with NaCl and since it is 1 to 1, there'd be 1.5 mol of NaCl.
A sample of gas occupies 20 mL at -109 degree C. What volume does the sample
occupy at 65 °C?
Answer: V2= 41.2mL
Explanation:
Givens:
* V1= 20ml
* T1 = -109 ⁰C --> K= ⁰C + 273.15 --> 164.15 K
* V2 = ??
* T2= 338.15 K
Use Charles law V1/T1 = V2/T2
Since we are looking for V2 we can rearrange the formula to
V2= (T2 x V1) /T1
V2= (338.15K x 20mL) / 164.15 K
V2= 41.2mL
NOTE:
Temperature should always be in K not in ⁰C or ⁰F
To convert from C to K use
*K= ⁰C + 273.15
Enter your C value in the ( ⁰C ) and you can get K
Elements are usually dull, brittle and do not conduct electricity are know as_____.
Points: 46
Answer:
nonmetals. it's one of them
why does fluorine have the highest electronegativity
Answer:
- Fluorine has 5 Electrons in its 2P shell
- Fluorine is so close to ideal Electron Configuration, the Electrons are held very tightly to the Nucleus.
Explanation:
Hopefully this was helpful!
explain why titanium conducts electricity
Answer:
Because they are electrical conductors because their delocalized electrons carry electrical charge through the metal. they are good conductors of thermal energy because their delocalized electrons transfer energy.
I hope it helps.
Pls help I will give u points pls
Answer:
i think D
Explanation:
what are the relationships among bond order, bond length, and bond energy?
Explanation:
When a bond is strong, there is a higher bond energy because it takes more energy to break a strong bond. This correlates with bond order and bond length. When the bond order is higher, bond length is shorter, and the shorter the bond length the greater the bond energy.
If two atoms have an electronegativity difference of 1.3, what type of bond would form between them?
Select one:a. non polar covalent b. polar covalent. c. ionic
Answer:
I would say iconic bond
Explanation:
What is the formula for the compound?
Answer:
the correct answer is CO2 (the last one)
will give brainlist to a person with correct answers for all (please help me)
1. Explain how is LiCl formed?
2. What is a combination/synthesis reaction
3. What is a decomposition reaction?
4. What is a single-replacement reaction?
5. What is a double-replacement reaction?
6. What are the trends in electronegativity within groups and across periods in the periodic table?
7. Which element has the lowest electronegativity value?
8. How does electronegativity determine the type of bond that atoms will form?
9. What type of bond will form between 2 atoms that have a large difference in electronegativity?
10. What type of bond will form between 2 atoms when the difference in electronegativity is 0.5?
11. Which element has the highest electronegativity value?
12. What does it mean that matter cannot be created nor destroyed in a Chemical reaction?
Answer:
1. LiCi is formed by the treatment of lithium carbonate with hydrochloric acid
2. A combination reaction (also known as a synthesis reaction) is a reaction where two or more elements or compounds (reactants) combine to form a single compound (product).
3. Chemical decomposition, or chemical breakdown, is the process or effect of simplifying a single chemical entity into two or more fragments.
4. A single-displacement reaction, also known as single replacement reaction or exchange reaction, is a chemical reaction in which one element is replaced by another in a compound
5. Double replacement reactions have two ionic compounds that are exchanging anions or cations.
6. The most electronegative elements are found on the top right of the periodic table.
7. cesium
8. Electronegativity describes the degree to which an atom attracts electrons in a chemical bond. But the electronegativity of two atoms would determine their bond type.
9. ionic bond
10. polar covalent bond
11. fluorine
12. Matter can change form through physical and chemical changes, but through any of these changes, matter is conserved. The same amount of matter exists before and after the change.
Hope i was able to help!!!
A little help here please
Answer:
Prokaryotic Cells:
- Bacteria
- Unicellular Organisms
- DNA as genetic material
- Ribosomes
- Do not have membrane bound organelles
- Always contain cell wall
Eukaryotic Cells:
- Contains organelles
- Have membrane bound organelles
- Unicellular Organism
- DNA as genetic material
- Ribosomes
- Have loose strand of DNA
- Has nucleus
- Multicellular Organism
- Plant cell
- Animal cell
Explanation:
I have separated them and made the common characteristics in bold. I cannot guarantee that it is correct, these are my educated estimates.
A scientist was in the field when he saw a mineral sample. He wanted to determine the relative hardness of the mineral, so he conducted scratch tests. He summarized his results in a table. A 2 column table with 4 rows. The first column is labeled Mineral with known hardness with entries: Chalcopyrite, pyrite, Orthoclase, Quartz. Second column is labeled Was a scratch produced? with entries: Yes, Yes, Yes, No. What conclusion can you make about the hardness of the mineral?.
The mineral hardness depends on its resistance to being scratched. Mohs scale is used to determine the hardness of an unknown mineral. The unknown mineral is harder than Orthoclase, but not harder than Quartz.
-------------------------
The hardness of a mineral is its resistance to being scratched or marked on the surface by another material.
Several elements are used to test the hardness of a mineral, like another mineral of known hardness.
Many different scales can be used to identify the mineral. However, the most commonly used is the Mohs scale.
Let us say that you have two minerals. You already know which mineral is one of them and its hardness.
If the unknown mineral scratches the known mineral, means that the first one is harder than the second one.But if the unknown mineral does not get to scratch the known one, it means they are equally hard, or the known mineral is harder than the unknown one.In the exposed example, the table must be as follows
Mineral Was a scratch produced?
Chalcopyrite YES
pyrite YES
Orthoclase YES
Quartz NO
Quartz is the hardest of these minerals. Its hardness level is 7 according to the Mohs scale.
Because scratches were produced using Chalcopyrite, Pyrite, and Orthoclase, we can assume that the unknown mineral is harder than these three ones.
However, no scratch was produced using quartz, suggesting that the unknown mineral is between orthoclase and quartz in the Mohs scale.
The unknown mineral is harder than Orthoclase, but not harder than Quartz. It is between 6 and 7 hardness levels.
---------------------------
You can learn more about the Mohs scale at
https://brainly.com/question/198363
https://brainly.com/question/1585664
https://brainly.com/question/10202262
Answer:
I can conclude that the mineral that the scientist found is harder than chalcopyrite, pyrite, and orthoclase, but not harder than quartz. I can also conclude that the unknown mineral is a relatively hard mineral.
Explanation:
edge example 2023
Atoms with the same number of protons but with different electrical charges are called:
Answer:
It is called ions
Explanation:
Synthetic fibers, like plastic, are derived from organic compounds. These fibers have been chemically changed by humans to last longer for better storage and more effective uses. These fibers are stronger than naturally occurring fibers like cotton and wool. Which of the following is a downside to these synthetic fibers when compared to natural fibers?
A.
The longer lasting material is more difficult to break down.
B.
The longer lasting material is less useful in manufacturing.
C.
The longer lasting material is not able to withstand high temperatures.
D.
The longer lasting material makes the fibers more expensive to buy.
The downside of this is that the longer lasting material is more difficult to break down.
Both natural fibers and synthetic fibers are polymer materials. Polymer materials are materials that are made by the agglomeration of small molecules called monomers.
The natural fibers are less long lasting than the synthetic fibers. The downside of this is that the longer lasting material is more difficult to break down. As a result of these, synthetic fibers lead to environmental pollution problems.
Learn more: https://brainly.com/question/25140263
Answer:
the longer lasting material is more difficult to break down.
Explanation:
Name one nutrient indicator and explain how it works.
Answer:
Hi this is Adhira please make me as brainlist
Explanation:
The nutritional status indicators for the CDC Growth Charts include obesity, overweight, underweight, and short stature. Percentiles are used to rank an individual or a group on a growth chart and indicate where either fits in the context of the reference population
What is an example of thermal energy
A) batteries moving a toy
B) riding a bicycle
C) plugging in a tv
D) using an oven to cook
does Waves move in a circular motion.
True or false
why yes
Waves are created by energy passing through water, causing it to move in a circular motion
2. Use the graph below to answer the following questions.
Does this graph represent an endothermic or an exothermic reaction?
How do you know this graph represents that type of reaction?
What is the potential energy of the reactants (PEreactants)?
What is the potential energy of the products (PEproducts)?
What is ΔH of the reaction?
REMEMBER: ΔH = PEproducts - PEreactants
What is the activation energy (Ea) of this reaction?
REMEMBER: Activation Energy = Maximum Energy - PEreactants
Answer:
The graph represents an endothermic reaction.
The products have more energy than the reactants.
80kJ
160kJ
80kJ
160kJ
The given graph is representing an endothermic reaction as the potential energy reactants are lower than that of the products.
ΔH of the reaction and activation energy is 80 KJ and 160 KJ respectively.
What is the endothermic process?An endothermic process can be defined as a process with an increase in the enthalpy H of the system. An endothermic process involves an increase in the temperature of the system.
Whether a process occurs spontaneously depends not just on the enthalpy change but also on the entropy change and temperature.
From the graph, the potential energy of the reactants = 80 KJ
The potential energy of the products = 160 KJ
ΔH of the reaction, ΔH = PE(products) - PE(reactants)
ΔH = 160 -80 = 80 KJ
The activation energy (Ea) of this reaction will be:
Activation Energy (Ea) = Maximum Energy - PE(reactants)
Activation Energy = 240 - 80 = 160 KJ
Learn more about the endothermic process, here:
brainly.com/question/13818956
#SPJ2
Help!! I’ll mark you Brainliest.!
Answer:
For 5 pts? gimme that
Explanation:
Answer:
Explanation:
if you know what those phrases mean, then you can look them up and draw those pictures you find, as well as add the definition of each.
(BRAINLIEST QUESTION)
Which answer below best describes what the law of Natural Selection is?
Select one:
a.
Natural selection is the process where those members of a species that can survive environmental hardships reproduce the future offspring with their strong characteristics being passed on, thus evolving the entire species.
b.
Natural selection is the process wherein species evolve over time because those members with common traits tend to survive hardships and produce more offspring.
c.
Natural Selection is the law that states the the natural evolution of a species is dependent on the shifts of the environment.
Answer:
I think it's A but I might be wrong
Explanation:
An atom's electron configuration ends with 3p4. If another atom has seven more electrons, what would be the continuation of the electron configuration?
The continuation of the electron configuration would be [tex]3p^6, 4S^2, 3d^3[/tex].
The initial p orbital is partially filled. Hence, it has to be completely filled first in order to obey the orbital filling rule. Lower energy orbitals are first filled before higher energy orbitals.
After filling the p orbital with 2 electrons from the remaining 7 electrons, higher energy orbital 4s and 3d can then be filled.
More on electron configuration can be found here: https://brainly.com/question/1255220?referrer=searchResults
Answer:
3p^6 4s^2 3d^3
Explanation:
Why is eating animals to obtain energy considered exothermic
Find the actual yield when the theatrical yield is 1.09g and percent yield is 90%.
Prokaryotic and Eukaryotic Cells Booklet
Answer:
Power Plant = Mitochondria (Mitochondria is the powerhouse of the cell)
City Limits = Cell Membrane (Outer layer of a cell)
City Hall = Nucleus (The nucleus is the control center in a cell)
City Food Processing Plant (Chloroplast process the cells food)
City Plans = Chromosomes (They contain the genetic information about the cell)
Community = Cytoplasm (Mainly process of elimination)
Explanation:
Explanations are in parenthesis
What is the number of atoms of oxygen in 0.1 mol of CuSO4.5H2O? & explain
When a solution of cesium chloride (CsCl) is subjected to high-speed centrifugation, a stable density gradient is formed.
a. True
b. False