Easy question I’ll give extra points. Help

Answer:

Explanation:

V = J/C

V = 20/1

= 20 v

Option A is the correct answer

Answer:

Option D. ²³⁹₉₃Np

Explanation:

From the question given above, the following data were:

²³⁹₉₂U —> ⁰₋₁e + __

Let ⁿₘX represent the unknown. Thus, the equation above becomes

²³⁹₉₂U —> ⁰₋₁e + ⁿₘX

Next, we shall determine n, m and X. This can be obtained as follow:

239 = 0 + n

239 = n

n = 239

92 = –1 + m

Collect like terms

92 + 1 = m

93 = m

m = 93

ⁿₘX => ²³⁹₉₃X => ²³⁹₉₃Np

Thus, the balanced equation becomes:

²³⁹₉₂U —> ⁰₋₁e + ⁿₘX

²³⁹₉₂U —> ⁰₋₁e + ²³⁹₉₃Np

Option D gives the correct answer to the question.

Answer:

D

Explanation:

239 93 Np

Answer:

Some plains form as ice and water erodes, or wears away, the dirt and rock on higher land. Water and ice carry the bits of dirt, rock, and other material, called sediment, down hillsides to be deposited elsewhere. As layer upon layer of this sediment is laid down, plains form. Volcanic activity can also form plains.

Answer:

3.67 N

Explanation:

From the question given above, the following data were obtained:

Charge of 1st object (q₁) = +15.5 μC

Charge of 2nd object (q₂) = –7.25 μC

Distance apart (r) = 0.525 m

Force (F) =?

Next, we shall convert micro coulomb (μC) to coulomb (C). This can be obtained as follow:

For the 1st object

1 μC = 1×10¯⁶ C

Therefore,

15.5 μC = 15.5 × 1×10¯⁶

15.5 μC = 15.5×10¯⁶ C

For the 2nd object:

1 μC = 1×10¯⁶ C

Therefore,

–7.25 μC = –7.25 × 1×10¯⁶

–7.25 μC = –7.25×10¯⁶ C

Finally, we shall determine the force. This can be obtained as follow:

Charge of 1st object (q₁) = +15.5×10¯⁶ C

Charge of 2nd object (q₂) = –7.25×10¯⁶ C

Distance apart (r) = 0.525 m

Electrical constant (K) = 9×10⁹ Nm²/C²

Force (F) =?

F = Kq₁q₂ / r²

F = 9×10⁹ × 15.5×10¯⁶ × 7.25×10¯⁶ / 0.525²

F = 3.67 N

Therefore, the force on the object is 3.67 N

Answer:

a). Single replacement.

Explanation:

Because one element replaces another element in a compound

Answer:

6 - iron

7 - by stringing many magnets together

Explanation:

6 - substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. This makes the atoms in these substances strongly magnetic—but they are not yet magnets. ... The piece of iron has become a magnet. Some substances can be magnetized by an electric current.

7 - it is that only

Answer:

500km per hour

Explanation:

if in 2 hours the airplane flies 1000 km then 1000 divided by 2 is 500km per hour.

Answer:

230.4 N

Explanation:

From the question given above, the following data were obtained:

Charge (q) of each protons = 1.6×10¯¹⁹ C

Distance apart (r) = 1×10¯¹⁵ m

Force (F) =?

NOTE: Electric constant (K) = 9×10⁹ Nm²/C²

The force exerted can be obtained as follow:

F = Kq₁q₂ / r²

F = 9×10⁹ × (1.6×10¯¹⁹)² / (1×10¯¹⁵)²

F = 9×10⁹ × 2.56×10¯³⁸ / 1×10¯³⁰

F = 2.304×10¯²⁸ / 1×10¯³⁰

F = 230.4 N

Therefore, the force exerted is 230.4 N

Answer:

230.4

Explanation:

acellus

Melvina's potential energy is 54,880 Joules.

To calculate Melvina's potential energy, we need to use the formula for gravitational potential energy:

Potential energy = mass × gravitational acceleration × height

Potential energy is a measure of the energy an object possesses due to its position relative to other objects. In this case, Melvina's potential energy is a result of her height above the ground. As she stands on the ledge of the burning building, her potential energy is stored and can be converted into other forms of energy if she were to jump or fall. The potential energy will decrease as she descends, and it will be converted into kinetic energy (energy of motion).

Given that Melvina has a mass of 70 kg and the ledge is 80 m above the ground, we can substitute the values into the formula:

Potential energy = 70 kg × 9.8 m/s² × 80 m

Calculating this, we find:

Potential energy = 54,880 Joules

For such more questions on energy

https://brainly.com/question/30369234

#SPJ8

Answer:

A. 1,800,000 J

B. 4473.87 N

C. 3.728 m/s²

Answer:

i. Statements A and B

Explanation:

Sana nakatulong

Answer: B

Explanation:

Answers A and C are examples of physical weathering while B is chemical weathering when water and lime mix it creates a reaction

Answer: i think the answer is C

Explanation:

Answer:

[tex]\theta=76\ rad[/tex]

Explanation:

Hoven that,

Initial angular velocity of the wheel = 24 rad/s

Final angular velocity = 14 m/s

Time, t = 4 s

We need to find how many radians does the wheel turn through during the 4 s interval. Let the displacement is [tex]\theta[/tex]. Using second equation of rotational kinematics to find it such that,

[tex]\theta=\omega_i t+\dfrac{1}{2}\alpha t^2[/tex]

Where

[tex]\alpha[/tex] is angular acceleration

[tex]\alpha =\dfrac{\omega_f-\omega_i}{t}\\\\\alpha =\dfrac{14-24}{4}\\\\\alpha =-2.5\ rad/s^2[/tex]

So,

[tex]\theta=24\times 4+\dfrac{1}{2}\times (-2.5)\times 4^2\\\\\theta=76\ rad[/tex]

So, it will turn 76 radian during the 4 s interval.

Answer:

a) The angular acceleration is 1.875 radians per square second.

b) The time taken by the disk to reach the final angular speed is 8 seconds.

Explanation:

a) Let suppose that the disk accelerates uniformly, given that initial and final angular speed ([tex]\omega_{o}[/tex], [tex]\omega_{f}[/tex]), in radians per second, and change in angular position ([tex]\Delta \theta[/tex]), in radians, are known. The angular acceleration ([tex]\alpha[/tex]), in radians per square second, are found by using this expression:

[tex]\alpha = \frac{\omega_{f}^{2}-\omega_{o}^{2}}{2\cdot \Delta \theta}[/tex] (1)

If we know that [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega_{f} = 15\,\frac{rad}{s}[/tex] and [tex]\Delta \theta = 60\,rad[/tex], then the angular acceleration of the disk is:

[tex]\alpha = \frac{\omega_{f}^{2}-\omega_{o}^{2}}{2\cdot \Delta \theta}[/tex]

[tex]\alpha = 1.875\,\frac{rad}{s^{2}}[/tex]

The angular acceleration is 1.875 radians per square second.

b) The time taken by the disk to reach the final angular velocity is determined by the following kinematic formula:

[tex]t = \frac{\omega_{f}-\omega_{o}}{\alpha}[/tex] (2)

Where [tex]t[/tex] is the time, in seconds.

If we know that [tex]\omega_{o} = 0\,\frac{rad}{s}[/tex], [tex]\omega_{f} = 15\,\frac{rad}{s}[/tex] and [tex]\alpha = 1.875\,\frac{rad}{s^{2}}[/tex], then the time taken by the disk is:

[tex]t = \frac{\omega_{f}-\omega_{o}}{\alpha}[/tex]

[tex]t = 8\,s[/tex]

The time taken by the disk to reach the final angular speed is 8 seconds.

Answer:

13.6 N

Explanation:

Since one side of the wedge is vertical and the wedge makes and angle of 33 with the horizontal, the angle between the weight of the copper block on the incline and the incline is thus 90 - 33 = 57.

Let M be the mass of the block that hangs, m be the mass of the block on the incline and T be the tension in the weightless unstretchable cord.

We assume the motion is downwards in the direction of the hanging block, M.

We now write equations of motion for each block.

So

Mg - T = Ma    (1) and T - mgcos57 - F = ma where F is the frictional force on the block on the incline and a is their acceleration.

Now, since both blocks do not move, a = 0.

So, Mg - T = M(0) = 0     and T - mgcos57 - F = m(0) = 0

Mg - T = 0    (3) and T - mgcos57 - F = 0 (4)

From (3), T = Mg

Substituting T into (4), we have

T - mgcos57 - F = 0

Mg - mgcos57 - F = 0

So, Mg - mgcos57 = F  

F = Mg - mgcos57

F = (M - mcos57)g

Since g = acceleration due to gravity = 9.8 m/s², and M = 2.94 kg and m = 2.85 kg.

We find F, thus

F = (2.94 kg - 2.85 kgcos57)9.8 m/s²

F = (2.94 kg - 2.85 kg × 0.5446)9.8 m/s²

F = (2.94 kg - 1.552 kg)9.8 m/s²

F = (1.388 kg)9.8 m/s²

F = 13.6024 kgm/s²

F ≅ 13.6 N

Answer:

3.17333333333? I hope I get it right

Explanation:

..................hello

Answer:

https://wtamu.edu/~cbaird/sq/2015/02/26/when-i-sit-by-a-campfire-how-does-its-hot-air-heat-me/#:~:text=When%20you%20sit%20by%20a,It%20comes%20from%20thermal%20radiation.&text=Since%20air%20is%20a%20good,of%20pockets%20of%20heated%20fluid.

Here's a link to help you hope it helps have a good day

Answer:

Speesd

Explanation:

Answer:

b I'm pretty sure sorry if I'm wrong

Answer:

I think the answer is B

Explanation:

The warm air turns cold and then it goes back to clouds

Answer:

false

Explanation:

I am in need of points sorry

Answer:

28.7%

Explanation:

efficiency = work output /work input × 100

Answer: The electric field is produced by stationary charges, and the magnetic field by moving charges (currents); these two are often described as the sources of the field. ... The force created by the electric field is much stronger than the force created by the magnetic field.

Explanation: An electric field is an invisible force field created by the attraction and repulsion of electrical charges (the cause of electric flow), and is measured in Volts per meter (V/m).

Answer:

The electric field is produced by stationary charges, and the magnetic field by moving charges (currents); these two are often described as the sources of the field.  The force created by the electric field is much stronger than the force created by the magnetic field.

Explanation:

Ggl

Answer: 14.5 kg.m/s

Explanation:

Given

mass of baseball is [tex]m=0.153\ kg[/tex]

The initial speed of the ball is [tex]u=-44.5\ m/s[/tex]

the final speed of the ball is [tex]v=50.5\ m/s[/tex]

Impulse is given as a change in the momentum

[tex]\vec{J}=\Delta \vec{P}[/tex]

[tex]J=m(v-u)\\J=0.153(50.5-(44.5))\\J=0.153\times 95=14.535\ kg.m/s[/tex]

Change in momentum up to 3 significant figures is 14.5 kg.m/s

Impulse applied by a bat is also the same as the change in momentum

Answer:

C) 413 Hz

Explanation:

For destructive interference, the path difference ΔL = (n + 1/2)λ where ΔL = L₂ - L₁ where L₁ = person's distance from one speaker (the closer one) = 5.0m and L₂ = person's distance from other speaker (the farther one) = 6.2 m and λ = wavelength = v/f where v = speed of sound = 330 m/s and f = frequency

So, ΔL = (n + 1/2)λ

L₂ - L₁  = (n + 1/2)v/f

f = (n + 1/2)v/(L₂ - L₁)

At the second lowest frequency that results in destructive interference at the point where the person is standing, n = 1.

So,

f = (1 + 1/2)v/(L₂ - L₁)

f = 3v/2(L₂ - L₁)

Substituting the values of the variables into the equation, we have

f = 3v/2(L₂ - L₁)

f = 3(330 m/s)/2(6.2 m - 5.0 m)

f = 3(330 m/s)/2(1.2 m)

f = 990 m/s ÷ 2.4 m)

f = 412.5 Hz

f ≅ 413 Hz

Answer:

the answers the correct one is A

Explanation:

Let's analyze the situation, the expression for ideal gases is

         PV = n R T

in this case n is the number of moles of the gas remains constant, so we see that there is a relationship between volume, pressure and temperature.

For the experiment we are conducting we must ensure that the temperature remains constant, one way to achieve this is by placing a small thermometer on the surface of the cylinder.

By rapidly compressing part of the work done, it is converted into internal energy of the gas molecules, and from there it is transformed into its temperature. One way to reduce this effect is to COMPRESS SLOWLY and thus keep the temperature constant.

This method of allowing to check

          P V = cte

when checking the answers the correct one is A

Answer:

vcyl / vsph = 1.05

Explanation:

       [tex]K_{trans} = \frac{1}{2}* M* v_{cm} ^{2} (1)[/tex]

       [tex]K_{rot} = \frac{1}{2}* I* \omega ^{2} (2)[/tex]

       [tex]v = \omega * R (3)[/tex]

       [tex]K_{rot} = \frac{1}{2}* \frac{1}{2} M*R^{2} * \frac{v_{cmc} ^{2}}{R^{2}} = \frac{1}{4}* M* v_{cmc}^{2} (5)[/tex]

       [tex]K_{cyl} = \frac{1}{2}* M* v_{cmc} ^{2} +\frac{1}{4}* M* v_{cmc}^{2} = \frac{3}{4}* M* v_{cmc} ^{2} (6)[/tex]

        [tex]I_{sph} = \frac{2}{3} * M* R^{2} (7)[/tex]  

       [tex]K_{rot} = \frac{1}{2}* \frac{2}{3} M*R^{2} * \frac{v_{cms} ^{2}}{R^{2}} = \frac{1}{3}* M* v_{cms}^{2} (8)[/tex]

      [tex]K_{sph} = \frac{1}{2}* M* v_{cms} ^{2} +\frac{1}{3}* M* v_{cms}^{2} = \frac{5}{6}* M* v_{cms} ^{2} (9)[/tex]

       [tex]\frac{v_{cmc}}{v_{cms}} =\sqrt{\frac{10}{9} } = 1.05 (10)[/tex]