2520 joule is the heat (q) when a student dissolves 5.00 g of CaCl₂ into 200.0 g of H₂O. The temperature changes from 25.0°C to 28.0°C.
H₂O mass=200.0 g
c of H₂O= 4.2 joules per gram
Δt=3 °C
q=mcΔt
q=200.0 g×4.2×3
q=2520 joule
mass of solution= (solute + solute)
mass of solution=5.00 g+200.0 g
mass of solution=700 g
Heat has a very precise meaning in thermodynamics that is distinct from how we typically use the word. Heat is the thermal energy that is transmitted when two systems with different surface temperatures come into contact. Heat is denoted by the letters q or Q and is measured in Joules.
Because it is defined in the context of a process through which energy can be transmitted, heat is occasionally referred to as a process quantity. We don't discuss the heat that a cup of coffee contains, but we may discuss the heat that the cup of hot coffee transfers to your hand. Another significant characteristic is heat.
To know more about Heat visit :brainly.com/question/13860901
#SPJ1
Select one element from the periodic table and describe its most common isotopes. Then select one of the isotopes and characterize how this isotope impacts the environment and/or living organisms.
Identify the various isotopes of the element you selected and include the percent abundance for each.
Identify the number of protons, electrons, and neutrons for each isotope.
Include an image or drawing of the isotope notation for each.
Describe how your selected isotope can be used as a research tool in environmental science or medicine.
Properly cite any sources that you use to support your ideas (you should use at least one source)
The element selected is carbon and the isotopes are carbon-12, carbon-13, and carbon-14.
The number of protons, electrons, and neutrons for each isotope of carbon are as follows:
carbon-12 - 6 electrons, 6 protons, and 6 neutronscarbon-13 - 6 electrons, 6 protons, 7 neutronscarbon-14 - 6 electrons, 6 protons, and 8 neutronsThe isotope notation for each is¹²₆C, ¹³₆C, and ¹⁴₆C.
The carbon-14 isotope is used in the radioactive dating of substances.
What are isotopes?Isotopes are atoms of the same element that differ from each other in their masses.
Isotopes of the same element have different masses as a result of the difference in the number of neutrons in the nucleus of the atoms of the element.
The existence of isotopes of elements accounts for why the atomic masses of elements are not whole numbers.
Learn more about isotopes at: https://brainly.com/question/12694278
#SPJ1
The density of a cube is 2.0gcm3. If the mass is 128 g, what is the length of each side of the cube?
Report your answer with two significant figures.
Taking into account the definition of density, the length of each side of the cube is 4 cm.
Definition of densityIn other words, density is a quantity that allows to measure the amount of mass in a certain volume of a substance.
The expression for the calculation of density is:
density= mass÷ volume
From this expression it can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.
Length of each side of the cubeIn this case, you know that:
Density= 2 g/cm³Mass= 128 gVolume= ?Replacing in the definition of density:
2 g/cm³= 128 g÷ volume
Solving:
2 g/cm³× volume= 128 g
volume= 128 g÷ 2 g/cm³
volume= 64 cm³
The volume of a cube is equal to the measure of its side to the cube. That is to say:
Volume = side x side x side = side³
So, the length of each side of the cube can be calculated as:
64 cm³= side³
∛64 cm³= side
4 cm= side
In summary, each side of the cube has a measure of 4 cm.
Learn more about density:
brainly.com/question/14401256
brainly.com/question/952755
brainly.com/question/1462554
#SPJ1
This element has 66 electrons in its electron cloud.
Answer:
below
Explanation:
From periodic table this is dysprosium
PLEASE HELP
Step 3: Apply the scaling factor to the
empirical formula.
The scale factor is 5 and the empirical
formula is CH2O. What is the molecular
formula?
The molecular formula is (CH2O)5 when the scale factor is 5 and the empirical formula is CH2O.
Considering the question given above, the following data were obtained:
Empirical formula is CH₂O
Molar mass of compound = 150 g/mol
Scaling factor (n) =?
Empirical formula × n = molar mass
[CH₂O]n = 150
[12 + (2×1) + 16]n = 150
[12 + 2 + 16]n = 150
30n = 150
Divide both sides by 30
n = 5
Therefore, the scaling factor is 5
A scale factor is a ratio between corresponding measurements of an object and a representation of that object.In chemistry, the empirical formula of a chemical compound is the simplest whole-number ratio of atoms present in a compound. .Learn more about empirical formula at:
https://brainly.com/question/14044066
#SPJ1
Answer:
The scale factor is 5. The formula is CH2O.
Multiply each by 5.
So:
C (there is only one)= 1×5
H (there are 2)= 2×5
O(there is only one)= 1×5
Equalling= C5H10O5
1. When mountain climbers hike up Mount Everest, they carry bottles of oxygen because the pressure decreases. At the top, the pressure can reach as low as 0.20 atm. If they bring 15 L of oxygen, stored at a pressure of 40 atm, what will be the volume of the gas when it is released at the top of the mountain? Assume that the temperature does not change as you climb the mountain.
Answer:
V2 = 0.075 L
Explanation:
P1= first pressure
P2= second pressure
V1= first volume
V2= second volume
P1V1 = P2V2=
(0.20 atmospheres)(15 L) = (40 atmospheres)V2=
V2 = (0.20 atmospheres)(15 L)/(40 atmospheres)=
V2 = 0.075 L
Which of the following nuclear reactions represents natural decay?
Radiation is produced when unstable or radioactive atoms through the process of becoming stable. We refer to this process as radioactive decay over time. Two protons and two neutrons are lost from the nucleus as a result of alpha decay.
What is nuclear decay reaction ?An unstable nucleus releases radiation and changes into the nucleus of one or more additional elements during a nuclear decay process, also known as radioactive decay.
The ensuing offspring nuclei are less energetic and heavier than the parent nucleus that underwent decay, making them more stable.
For example, by producing an alpha particle, the unstable uranium-238 nucleus naturally decays into a thorium-234 nucleus. The most prevalent radioactive decay processes are decay, emission, decay, positron emission, and electron capture.
Thus, Radiation is produced when unstable or radioactive atoms through the process of becoming stable.
To learn more about nuclear decay reaction follow the link below;
https://brainly.com/question/2312116
#SPJ1
Draw the product of this reaction. Ignore inorganic byproducts.
H2/Lindlar's catalyst
The product of this reaction using inorganic by-products using H2/Lindlar's catalyst is cis-2-butene.
Lindlar's catalyst is Pd-BaSO4 which is used to convert alkynes to alkenes.It is done by using partial hydrogenation using special catalysts.In this process, hydrogen is added on the same side of the molecule which is known as syn addition.On the treatment of 2-butyne with hydrogen gas and Lindlar’s catalyst, the major product obtained is cis-2-butene.It is a heterogeneous catalyst made up of palladium consisting of palladium deposited on barium sulfate with traces of lead and quinoline.It is an addition type of reaction.To learn more about Lindler's catalyst visit:
brainly.com/question/14464125
#SPJ1
Between Chlorine and Aluminum which ones electrons would be closer to the nucleus ? Explain your answer.
Answer:Electrons that are closer to the nucleus are in filled orbitals and are called core electrons. Valence electrons are farthest from the positive charge
Explanation:
What does this image BEST represent?
Closeup of a glass windsheild, three impact points can be seen with shattered glass radiating outwards from the center.
A.
trace evidence
B.
radial fractures
C.
chemical properties
D.
class characteristics
The option that best represent the depiction of the Closeup of a glass windshield is option A: trace evidence
How do you compile evidence of glass breakage?In paper bindles, coin envelopes, pill boxes, or film cans that can be tagged and completely sealed, place the little glass pieces before placing them in the last. Put big glass pieces in boxes. Use cotton or tissue to cushion individual pieces while shipping to avoid breakage and damaged edges.
Note that the field of forensic science known as "trace evidence analysis" focuses on the minute transfers of materials that are invisible to the unassisted eye.
Hence, Trace evidence must be handled carefully and analyzed using specialist methods.
Learn more about evidence from
https://brainly.com/question/17043365
#SPJ1
Side effects can occur when chemists experiment with clinical drugs.
True or False
Answer:
True. When chemists experiment with clinical drugs, they may inadvertently create new side effects that were not present in the original drug. Additionally, the new drug may interact with other drugs in unexpected ways, which can also create new side effects.
Consider the reaction
2H2+O2⟶2H2OΔ rxn=−484 kJ
Which answer best describes the transfer of heat that occurs when 1.50 mol H2 reacts?
The true statement is that 363 kJ of heat is evolved in the process.
What is the true statement?We know that a reaction has to do with the combination of the reactants in order to yield the products. We can see the thermochemical balanced reaction equation of the process as it was written in the question. A thermochemical equation is the type of equation that includes the energy that is absorbed or evolved in the reaction equation.
Now we can see that the reaction shows the combination of hydrogen and oxygen to give two molecules of water. This is a gas phase reaction and heat is given out according to the thermochemical reaction equation.
From the reaction equation;
If 2 moles of hydrogen evolves 484 kJ of energy
1.5 moles of oxygen evolves 1.5 moles * 484 kJ /2 moles
= 363 kJ
Learn more about thermochemical reaction:https://brainly.com/question/5102780
#SPJ1
Which property of liquids explains why a glass of water can be filled over the brim without spilling?
Answer:
Surface tension due to cohesion
Explanation:
Water molecules are polar meaning they have dipoles. The hydrogen end is partially positive while the oxygen end is partially negative. This is because oxygen with high atomic mass attracting most of the molecule's electron cloud to its end.
Due to this phenomenon water molecules act like little magnets that attract each other. The attraction of the molecules forms hydrogen bonds with each other. This is called cohesion (attraction of similar molecules). Due to this, water is able to create a surface tension that acts like a ‘skin’ and can support some weight (including its own weight) without collapsing.
Read more on Brainly.com - https://brainly.com/question/13216792#readmore
Answer:
Cohesion of water
Explanation:
cohesion means sticking together so Before it overflows, the water forms a dome-like shape(rounded) above the rim of the glass. This dome-like shape forms due to the water molecules' cohesive properties, or their tendency to stick to one another.
Green plants use light from the Sun to drive photosynthesis. Photosynthesis is a chemical reaction in which water (H₂O) and carbon dioxide (CO₂)
chemically react to form the simple sugar glucose (C6H₁206) and oxygen gas (O₂).
What mass of water is consumed by the reaction of 8.86 g of carbon dioxide?
Be sure your answer has the correct number of significant digits.
The mass of water is consumed by the reaction of 8.86 g of carbon dioxide is 3.62 g.
The balanced chemical equation for photosynthesis is given by:
6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂
Therefore, from the above reaction it is clear that 6 moles of carbon dioxide and 6 moles of water combines to produce 1 mole of glucose sugar and 6 moles of oxygen.
The molar mass of carbon dioxide is 44.01 g/mol.
Therefore, the number of moles of carbon dioxide in 8.86 g of CO₂ is :
Number of moles of CO₂ = (8.86 g) ÷ (44.01 g/mol )
=0.201 moles
From the balanced chemical equation 6 moles of water is consumed with CO₂.
Number of moles of water = 6moles H₂O ÷ 6moles CO₂ × 0.201mol CO₂
= 0.201 mol
The molar mass of water is 18.01 g/mol.
Therefore the mass of water consumed is :
Mass of water = Number of moles of water × Molar mass of water
= 0.201 mol × 18.01 g/mol
= 3.62 g
Hence, the mass of water is consumed by the reaction of 8.86 g of carbon dioxide is 3.62 g.
To know more about photosynthesis refer to :
https://brainly.com/question/28797698
#SPJ1
The specific gravity of iron is 7.87, and the density of water at 4.00 ∘C is 1.00 g/cm3 . You can use this information to find the density of iron.
Find the volume occupied by 6.50 g of iron
The volume occupied by the given mass of iron is 0.83 [tex]cm^{3}[/tex].
What is the specific gravity?The term specific gravity has to do with the ratio of the density of an object to the density of water. We must note that density of water is the bench mark that have been used to obtain the densities of every other substances hence it was assigned a density of 1.00 g/ [tex]cm^{3}[/tex].
Now we know from the question that;
Density of water = 1.00 g/ [tex]cm^{3}[/tex]
Specific gravity of iron = 7.87
Mass of the iron = 6.50 g
Density of iron = Specific gravity * density of water = 7.87 * 1.00 g/ [tex]cm^{3}[/tex]
= 7.87 g/ [tex]cm^{3}[/tex]
Given that;
Density = mass/volume
volume = mass/Density
volume = 6.50 g/7.87 g/ [tex]cm^{3}[/tex]
Volume = 0.83 [tex]cm^{3}[/tex]
We can see that from the calculations, the density of the iron as is clear in the procedure is 7.87 g/cm3 and it has a volume of 0.83 cm3 .
Learn more about density:https://brainly.com/question/15164682
#SPJ1
A galvanic (voltaic) cell consists of an inert platinum electrode in a solution containing 1.0 M titanium(III) ion and 1.0 M titanium(II) ion, and another inert platinum electrode in a solution containing 1.0 M iron(III) ion and 1.0 M iron(II) ion, connected by a salt bridge. Calculate the standard potential for this cell at 25°C . Standard reduction potentials can be found in the standard reduction potentials table.
∘cell=
The standard potential for the galvanic cell at 25°C is 1.98 V.
What is a galvanic cell?A galvanic cell or an electrochemical cell is a cell that converts the chemical energy of the reactions occurring within it to electrical energy.
The galvanic cell is able to convert chemical energy to electrical energy as a result of the redox reactions occurring within the cell.
The standard potential for the given galvanic cell at 25°C is calculated as follows
Standard reduction potentials:
Ti³⁺ + 3e⁻ ---> Ti; E° = − 1.21 V (anode)
Fe³⁺⁺+ e⁻--> Fe²⁺ ; E° = 0.77 volts (cathode)
Eºcell = 0.77 V - (-1.21 V)
Eºcell = 1.98 V
Learn more about the standard potential of a cell at: https://brainly.com/question/19036092
#SPJ1
Write the nuclear equation for the Alpha decay (emits 1 Alpha particle) of a radioactive
Radium-226 isotope.
The nuclear equation for the Alpha decay of a radioactive Radium-226 isotope is ²²⁶₈₈Ra → ²²²₈₆Rn + ⁴₂He
The sun of the mass numbers of the reactant equal the sum of the mass numbers of the product and radium 226 decay by alpha particles radiation to an inert gas and radon 222 which also decay by alpha particle radiation and due to the short half life of radon 222 there is high probability it will decay in the body and alpha particle is a helium nucleus it contain 2 proton an 2 neutron foe mass number of 4 and during alpha decay an atomic nucleus emit an alpha particles and it transform into an atom with atomic number 2 less and mass number 4 less
And the radium 226 decay through alpha particles emission to form radon 222 according to the equation ²²⁶₈₈Ra → ²²²₈₆Rn + ⁴₂He
Know more about Alpha decay
https://brainly.com/question/17227810
#SPJ1
Thus, radium-226 decays through α-particle emission to form radon-222 according to the equation:
How many atoms of calcium are present in 83.4 g of calcium?
Answer:
1.25*10^24 atoms with sig figs
Explanation:
To find the number of atoms, an easy way to do this would be to convert the mass to the number of moles, then convert moles to the number of atoms.
There are 40.08 grams of calcium per mole, so 83.4 grams of calcium would have 83.4/40.08 moles of calcium, or about 2.081 moles of calcium
Each mole of something contains about 6.022*10^23 of that something, so 2.081 moles of calcium atoms would equal 2.081 *(6.022*10^23) atoms. 2.081 *(6.022*10^23) equals 1.25*10^24, so there would be 1.25 * 10^24 atoms in 83.4 grams of calcium
What theoretical mass of NaCl would result from reacting 3.0
moles of NaHCO3 with excess HCI (aqueous)
The theoretical mass of NaCl would result from reacting 3.0 moles of NaHCO3 with excess HCI is 175.32 g.
This problem is solved by using the concept of moles:
What is mole?Mole is a term which is defined as a ratio of theoretical mass of compound to the molar mass of compound.
Mathematically,
Moles = given mass/molar mass
Molar mass of NaCl = 58.44 g/Mol
Now we have to calculate the moles of NaCl
[tex]NaHCO_{3} + HCl = > NaCl + H_{2}O + CO_{2}[/tex]
From the chemical equation, we noticed that moles of NaHCO3 is equal to moles of NaCl.
Since moles of NaHCO3 = 3
Therefore, moles of NaCl = 3
Now, by substituting all the values, we get
Theoretical mass of NaCl = 3 x 58.44 = 175.32 g
Thus we concluded that the theoretical mass of NaCl would result from reacting 3.0 moles of NaHCO3 with excess HCI is 175.32 g
Learn more about Moles:
https://brainly.com/question/15209553
#SPJ1
Underline the correct answer 1.In which of the following substances are the particles arranged in a regular pattern? A Water B Salt solution C Ice D Water vapour
Answer:
A). Water
PLEASE GIVE BRAINLIEST THANK YOU!!!
Answer:
water
Explanation:
Write the balanced NET ionic equation for the reaction when NH₄Cl and Cu(C₂H₃O₂)₂ are mixed in aqueous solution.
The net ionic equation of the reaction as it is shown have been given here by the equation; [tex]Cu^+(aq) + Cl^-(aq) ---- > CuCl(s)[/tex]
What is net ionic equation?The term net ionic equation has to do with the equation that shows the manner in which we are able to convey the information that concerns the ions that do not undergo a change in the reaction.
In this case, we have the reaction that occurs between ammonium chloride and copper II acetate which would produce a copper I chloride and an ammonium acetate product. The net ionic equation would now be;
[tex]Cu^+(aq) + Cl^-(aq) ---- > CuCl(s)[/tex]
Learn more about net ionic equation:https://brainly.com/question/15466794
#SPJ1
how are the volume of the container, the pressure of the gas, the number of gas particles, and the temperature of the gas related?
Taking into account the definition of Ideal Gas Law, the volume of the container, the pressure of the gas, the number of gas particles, and the temperature of the gas are related by the Ideal Gas Law.
Ideal Gas LawAn ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law:
P×V = n×R×T
where:
P is the gas pressure.V is the volume that occupies.T is its temperature.R is the ideal gas constant. The universal constant of ideal gases R has the same value for all gaseous substances. n is the number of moles of the gas. SummaryIn summary, the volume, the pressure, the number of gas particles, and the temperature are related by the Ideal Gas Law.
Learn more about Ideal Gas Law:
brainly.com/question/4147359
#SPJ1
What types of atoms typically form covalent bonds?
Answer: Between non-metals
Explanation:
According to US law, when are the Miranda rights required to be read to someone?
A.
before a citizen talks to any police officials
B.
before a person testifies in a court case
C.
before an investigator collects evidence from someone’s home
D.
before a suspect in custody is questioned
This isn't chemistry but I believe the answer is D, before a suspect in custody is questioned.
Hope this helped.
Answer: D
Explanation:
PLS HELP HIGH POINTS
Which term describes this reaction?
~KIK-TK
H3N+-C-C
addition
Ocondensation
x elimination
O substitution
H-N-C-C
H₂O
H₂N-C-C-IN-C-C
HHH
Answer:
Condensation
Explanation:
We can see that H2O is formed when the two molecules join together, which is a characteristic of Condensation polymerization
What is the molecular electron configuration of [tex]O_{2}[/tex]
The electron configuration of O₂ is 1s² 2s² 2p⁴.
What is meant by electron configuration?Electron configuration can simply be defined as the arrangements of electrons of atoms of elements in the orbitals or electrons shells. In order words, it simply means putting the electrons in order from the smallest orbital or shell to the biggest one.
That being said, from the task given above, the atomic number of oxygen is 8, meaning that if we are put down, the electron configuration of oxygen, we will have to distribute 8 electrons around its orbitals. An atom simply means the smallest particle of an element which can take part in a chemical reaction. An element is a substance which cannot be splitted into simpler forms by ordinary means.
So therefore, we can now confirm and deduce from the explanation above that electron configuration of the oxygen atom or element is the distribution of electrons around its orbitals.
Read more on electron configuration:
https://brainly.com/question/5306808
#SPJ1
a sculpted has prepared a mold for casing a silver figure. The figure has a volume of 225 cubic cm. how many ounces of silver are needed in the preparation of the silver figure?
83.246 ounces of silver is required to make the silver figure.
It is given that 10.49 g/cm^3 is the density of silver at Room temperature and the volume of Silver is 225cm^3.
To prepare silver of 225cm^3 of volume, we require the following:
Density = Mass/Volume
Mass = Density x Volume
Amount of silver = 10.49x225
Amount of silver = 2360.25 g
We know that,
100g = 3.5274 ounces
Then,
= 3.5274/100
= 0.035274 ounces of silver.
The mass of silver required in ounces = 2360.25 x 0.035274
The mass of silver in ounces = 83.246 ounces.
Therefore the mass of silver needed in ounces is 83.246 ounces. Through this conversion, the amount of any substance can be converted from kilograms to ounces.
To know more about pounds, click below:
https://brainly.com/question/25973294
#SPJ9
From the equations above, which compound dissolved in water would conduct the most electricity?
C₂H5O
CuSO
HF
Based on what you know now, do you think the channel on Mars was formed by flowing water or flowing lava?
Ancient Martian riverbed channels were formed by molten lava rather than by liquid water.
Flowing lava can carve and carve paths like water-eroded riverbeds and canyons, and could explain at least one of the winding channels on Mars' surface. Many waterways on Mars were carved by water, but not all. Lava can also flow, creating features similar to stream channels. However, lava functions in many different ways.
Scientists have known since the Mariner 9 mission in 1972 that volcanic structures cover most of the surface of Mars. These features include vast lava flows, vast lava plains, and the largest known volcanoes in the solar system. Massive torrents of water carry rocks and rocks torn from upstream springs. These scratch and abrade the canal floor, creating long lines that floodwaters can wash away and expand.
Learn more about Flowing lava here:-https://brainly.com/question/28434097
#SPJ9
There are 4.9875 mol C, 7.9802 mol H,
and 2.00 mol O in the sample.
Divide each by the smallest number of
moles. What is the ratio for the C?
Do not round your answer
2.48925 C : ? H : ? O
The ratio of the carbon to other atoms would be 2.49375:3.9901:1.000 and the empirical formula of the compound would be [tex]C_2H_8O[/tex]
Empirical formulaThe compound contains C, H, and O according to the following information:
C = 4.9875 mol
H = 7.9802 mol
O = 2.00 mol
In order to obtain the empirical formula of the compound, divide the mol of each atom by the smallest mol. In this case, the smallest mol is 2.00
C = 4.9875/2.00
= 2.49375
H = 7.9802/2.00
= 3.9901
O = 2.00/2.00
= 1.0000
Thus, the ratio of carbon to the rest of the atoms present in the compound is 2.49375:3.9901:1.000
In order to find the empirical formula of the compound, the mole of each atom needs to be approximated to the nearest whole number.
C = 2
H = 8
O = 1
Thus, the empirical formula of the compound is [tex]C_2H_8O[/tex].
More on empirical formulas can be found here: https://brainly.com/question/14044066
#SPJ1
What is 2x+83-(456x56)^2
Answer: -207936x>112+2x+83