Answer:
Explanation:
The measure of energy used in electrochemistry is the cell potential (ecell), which is the difference in electrical potential between two electrodes. A common term for this difference in electrical potential is voltage or emf.
The strength of an acid is affected by the polarity of the bond connected to the acidic hydrogen. The more highly polarized this bond, the more easily the hydrogen is ionized. Electronegative atoms or groups of atoms present in the structure of an acid can act to withdraw electrons and produce additional polarization. Two common groups of acids to which this principle can be applied are oxoacids and carboxylic acids. In the latter group, the length of the hydrocarbon chain in a carboxylic acid has very little effect on acid strength Longer chains may slightly diminish acidity. Bases act as hydrogen ion acceptors because of the unshared electron pass in their structure. Any group present in a base that withdraws electrons makes these electron pairs less available to accept a hydrogen ion. In contrast, any group that can act as an electron donating group such as hydrocarbon groups (usually represented as II) can increase the base strength. Thus, the addition of electronegative atoms or groups of atoms to the structure of a base decreases the base strength and electron donating groups increase base strength. Many common weak bases are derivatives of ammonia, in which H atom(s) of NH_2 are replaced with other groups.
Arrange the following oxoacids in order of decreasing acid strength. Rank from strongest to weakest acid.
1. HBrO
2. HClO
3. HClO2
4. HClO3
Answer:
The answer is "[tex]\bold{HClO_3 > HClO_2 >HClO > HBrO}[/tex]"
Explanation:
We arrange oxoacids to decrease the intensity of acids in this question. Or we may conclude all this from strongest to weakest acids they order oxoacids, that's why above given order is correct.
pls help with 1 question (15 ponts)
What happens in the circulatory system?
During a solar eclipse, explain what would an observer
on the Moon see on the surface of the Earth?
Answer:
It getting darker
Explanation:
This is because the light isn't hitting the earth as much, making it darker. They might also see more city lights than before. Hope this helps! plz mark as brainliest!
help ill mark brainlist !!! (no bots or links)
at a subduction zone, a very low and deep point forms on the surface of the crust. what is this low point called?
A ) Rift
B ) Valley
C ) Ridge
D ) Trench
Answer:
The trench.
Explanation:
A region where this process occurs is known as a subduction zone, and its surface expression is known as an arc-trench complex.
Help me pls I put 49 point( every single point that I have) pls help me
Answer:
see below
Explanation:
1) chem rxn compound molecule covalent ions ionic
2) 2 hydrogen one oxygen H2O covalent
3) is always liq
What are the two types of bonding we have studied?
a. Metallic and covalent
b. Covalent and ionic
c. lonic and metallic
d. Molecular and metallic
Answer:
B: Covalent bond and Ionic bond
what statement is the best description of a chemical bond
Answer:
A chemical bond holds atoms together.
Pls help with the question.
Answer:
2 L
Explanation:
From the question
Applying boyles law,
PV = P'V'....................... Equation 1
Where P = Initial pressure, P' = Final Pressure, V = Initial Volume, V' = Final Volume.
make V' the subject of the equation
V' = PV/P'.................... Equation 2
Givne: V = 5 L, P = 500 mmHg, P' = 1240 mmHg
Substitute these values into equation 2
V' = (5×500)/1240
V' = 2500/1240
V' = 2 L
which wet land is known for the large trees in the water known as bottomland hardwoods?
A. Central Texas
B.South Texas
C. East texas
how much carbon is in CO2 if the sample contains 48 g of oxygen remember the ratio of carbon to oxygen is 12 g of 32 g
18g
24g
12g
20g
Answer: 24g
Explanation:
What volume, in milliliters, of water is needed to make an 8.40 M solution of HCl acid using 180. grams of HCI ?
0 603 mL
O 41.4 mL
0 587 ml
0 24.1 mL
Answer:
0 587 mL
Explanation:
First we convert 180 grams of HCl into moles, using its molar mass:
180 g ÷ 36.46 g/mol = 4.94 mol HClNow we can use the number of moles and the given concentration to calculate the required volume, applying the definition of molarity:
Molarity = moles / litersLiters = Moles / molarity4.94 mol / 8.40 M = 0.588 LFinally we convert liters into milliliters:
0.588 L * 1000 = 588 mLThe closest answer is option C, 587 mL.
The volume needed to make an 8.40 M solution of HCl is 0.587 ml.
The correct option is C.
What is HCl?HCl is a strong acid. It is present in our stomach to help in digesting food.
Step1: covert 180 grams into moles
Molar mass of HCl is 36.46 g
[tex]\dfrac{180 g}{36.46 g/mol } = 4.94\; mol\; HCl[/tex]
Step2: calculate the molarity
[tex]\rm Molality = \dfrac{mol}{L}\\\\\rm L = \dfrac{4.94 mol }{8.40 M} = 0.588 L\\[/tex]
Covert the liters into ml
[tex]\dfrac{0.588 L}{1000} = 588 mL[/tex]
Thus, the volume of the solution is 588 ml., nearest is option C, 587 ml.
Learn more about HCl
https://brainly.com/question/3637432
A dunk tank holds 550,200 grams of water. How many moles of water are in the tank?
Answer:
Aà bhûtÿ ñhjkjłfd hÿrèërqw
Explanation:
Question 5
Complete the following analogy:
Reflection nebulae : blue :: emission nebula:
Greenish-blue
Yellow
Red
Pinkish-red
Answer:
That one is tricky but i would say yellow
Explanation:
Which equation is correct if the
volume of a block is 64 cm3?
A. 5 cm x 5 cm x 5 cm = 64 cm3
B. 8 cm x 4 cm x 2 cm = 64 cm3
C. 5 cm + 5 cm + 5 cm = 64 cm3
D. 8 cm + 4 cm + 2 cm = 64 cm3
Answer:
B.
Explanation:
it's B because 4 x 2 is 8 and we all know 8 x 8 is 64. So the answer is B.
The equation that is correct if the volume of a block is 64 cm³ is 8 cm x 4 cm x 2 cm = 64 cm³. The correct option is B.
What is volume?Volume is the space occupied by any three-dimensional object. The volume is also considered as the total weight of the object. The volume is calculated as mass is divided by the density.
A block will be a rectangle because it contains length, breadth, and height. The formula will be V = L x B x H
As take all the options, and multiply them, we can calculate the actual volume of the box;
5 cm x 5 cm x 5 cm = 125
8 cm x 4 cm x 2 cm = 64 cm3
5 cm + 5 cm + 5 cm = 15
8 cm + 4 cm + 2 cm = 14
So, the correct option will be B, 8 cm x 4 cm x 2 cm = 64 cm. All others are incorrect.
Thus, the correct option is B. 8 cm x 4 cm x 2 cm = 64 cm.
To learn more about volume, refer to the link:
https://brainly.com/question/1578538
#SPJ2
SSA PRACTICE QUESTION
Mandy wanted to see if a new
environmentally-friendly pesticide will
prevent insect damage to tomato plants.
After making a hypothesis, she conducts
her experiment. She treats five tomato
plants with traditional pesticide and five
with the new pesticide. Mandy also
leaves five plants untreated as a control.
She makes careful notes of how she set
up her experiment and then records her
data about all of the plants. Why is it
important for Mandy to record her
procedures and data accurately?
Answer:
The correct answer is - so that other scientists can replicate the experiment and make sure the results are correct or to check accuracy.
Explanation:
The data and procudres are required to be recorded or noted correctly so the experiment and research can be replicate and tested for the accuracy of the experiment by other scientist and researcher.
Mandy also need to note procedure, data, variables and other data correctly for the testing the accuracy and replication of the experiment. The replication is essential to check if every thing is correct and result are error free.
How many moles of water are produced from burning 80 moles of
methane in excess oxygen?
Answer:
160 mol H₂O
Explanation:
Step 1: Write the balanced complete combustion reaction
CH₄ + 2 O₂ ⇒ CO₂ + 2 H₂O
Step 2: Establish the appropriate molar ratio
According to the balanced equation, the molar ratio of CH₄ to H₂O is 1:2.
Step 3: Calculate the moles of water formed from 80 moles of methane
We will use the previously established molar ratio.
80 mol CH₄ × 2 mol H₂O/1 mol CH₄ = 160 mol H₂O
Which sample contains the greatest number of atoms. A sample of Ca that contains 3.40×1024 atoms or a 1.76 mole sample of Be?
The sample of _____ contains the greatest number of atoms.
Answer:
The sample of __Ca___ contains the greatest number of atoms
Explanation:
As we know,
1 mole [tex]= 6.022*10^{23}[/tex] molecular entities (Can be atom, ions or molecules)
Number of atoms in 1.76 mole sample of Be
[tex]= 6.022*10^{23} *1.76\\= 1.059 * 10^{24}[/tex]
The sample of __Ca___ contains the greatest number of atoms
What is created when an acid is mixed with a base?
Answer:
If you mix equal amounts of a strong acid and a strong base, the two chemicals essentially cancel each other out and produce a salt and water. Mixing equal amounts of a strong acid with a strong base also produces a neutral pH (pH = 7) solution.
A] 1 N2 + 3 H2 → 2 NH3
1. How many moles and grams of ammonia can be made from 6.3 moles of H2 ?
2. How many moles and particles of ammonia can be made from 2.5 moles of N2 ?
3. How many moles is 425 g of ammonia? How many moles and grams of N2 are needed to make it?
4. How many moles and grams and liters of H2 are needed to make 10 moles of ammonia?
I haven't done these in some time, so I'm not sure if they are 100% right.
1) 6.3 moles of H2( 2 mol of NH3 / 3 mol of H2)= 4.2 mol of NH3
6.3 moles of H2( 2 mol of NH3/ 3 mol of H2)(17.04 g of NH3/1 mol NH3)= 71.57 g of NH3
2) 2.5 moles of N2(2 mol of NH3/1 mol of N2)= 5 moles of NH3
2.25 moles of N2(2 mol of NH3/ 1 mol of N2)(6.02x10^23 particles/ 1 mol of NH3)= 3.01x10^24 particles of NH3
3) 425 g of NH3(1 mol of NH3/17.04 g NH3)= 24.9 moles of NH3
425 g of NH3(1 mol of NH3/17.04 g of NH3)(1 mol of N2/2 mol of NH3)(28.02 g of N2/1 mol N2)= 349 g of N2
425 g of NH3(1 mol of NH3/17.04 g of NH3)(1 mol of N2/2 mol of NH3)= 12.5 mol of N2
4) 10 moles NH3(3 moles of H2/2 moles of NH3)= 15 moles H2
10 moles NH3(3 mol of H2/2 mol of NH3)(2.02 g of H2/1 mol of H2)= 30.3 g of H2
30.3 g = .0303 liters of H2
Calculate the pH for the following weak acids
.01M Formic acid (HCHO2) aka= 1.7 x 10^-4
Answer:
pH = 2.88
Explanation:
For a weak acid solution, the pH can be calculated using the following formulas:
[H⁺] = [tex]\sqrt{Ka*C}[/tex]pH = -log[H⁺]Where Ka = [tex]10^{-pKa}[/tex] and C is the molar concentration.
We are given Ka and C by the problem, meaning we can now proceed to calculate [H⁺]:
[H⁺] = [tex]\sqrt{1.7*10^{-4}*0.01}[/tex] [H⁺] = 0.0013 MFinally we calculate the pH:
pH = - log (0.0013) = 2.88Select all of the answers that apply.
Which of the following characteristics must an air mass have?
It flows as one unit.
It has different temperatures but uniform humidity.
It must be 1,000 miles or more in size.
It must form over a low-pressure area.
It has a uniform temperature and humidity.
Explanation:
it has different temperature but uniform humidity
hope it will help you
Someone please help me
Answer:
D - synapse
Explanation:
Synapse, also called neuronal junction, the site of transmission of electric nerve impulses between two nerve cells (neurons) or between a neuron and a gland or muscle cell (effector). A synaptic connection between a neuron and a muscle cell is called a neuromuscular junction.
A lab requires 3.50L of a 2.0M solution of HCl. What volume of a 6.0M solution is needed to make this solution?
Answer:
THE ANSWER IS 1.167L
Explanation:
What is the relative atomic mass of an element
whose isotopic composition is 90% of 20x and 10% of 22x
Answer:
20.2 amu.
Explanation:
Let A represent isotope ²⁰X
Let B represent isotope ²²X
From the question given above, the following data were obtained:
For Isotope A (²⁰X):
Mass of A = 20
Abundance (A%) = 90%
For Isotope B (²²X):
Mass of B = 22
Abundance (A%) = 10%
Relative atomic mass (RAM) =?
The relative atomic mass (RAM) of the element can be obtained as follow:
RAM = [(Mass of A × A%)/100] + [(Mass of B × B%)/100]
RAM = [(20 × 90)/100] + [(22 × 10)/100]
RAM = 18 + 2.2
RAM = 20.2 amu
Thus, relative atomic mass (RAM) of the element is 20.2 amu
How does photosynthesis happen? (Also can anyone Pay Pal me 2 more dollars for school supplies.
Explanation:
make me brainy least pkz
4
In the Hatom , what is the correct order (arrangement) of energy levels
Answer correctly please
Answer:
C.
Explanation:
3. Calculate the average atomic mass of sulfur if 95.00% of all sulfur atoms have
a mass of 31.972 amu, 0.76% has a mass of 32.971u and 4.22% have a mass of
33.967u.
Answer:
Average atomic mass = 32.057 u
Explanation:
Average atomic mass = Σ(isotope × abundance)
Average atomic mass = (0.95 × 31.972) + (0.0076 × 32.971) + (0.0422 × 33.967)
Average atomic mass = 32.057 u
Which halogens are gases at STP?
As the atomic number increases, the reactivity of the halogens decreases. Fluorine and chlorine exist as gases at room temperature, while bromine is a liquid, and iodine is a solid.
Answer:
As the atomic number increases, the reactivity of the halogens decreases. Fluorine and chlorine exist as gases at room temperature, while bromine is a liquid, and iodine is a solid.
What is the percent of C in
CO2?
(C = 12.01 amu, O = 16.00 amu)
[? ]%
Please help
Answer:0.034%
Explanation: