find a projection e which projects r2 onto the subspace spanned by (1, - 1) along the subspace spanned by (1, 2).

The closest option to our calculated probability is option B, which is 0.5294.

The first step to solving this problem is to convert the waiting time of 1.5 minutes into seconds, which is 90 seconds. We know that the waiting time is uniformly distributed between 30 and 200 seconds, so we can calculate the total possible waiting time as 200-30 = 170 seconds.
To find the probability that a rider must wait more than 1.5 minutes (90 seconds), we need to find the proportion of the total possible waiting time that is greater than 90 seconds.
This can be calculated as follows:
Probability = (Total possible waiting time - Waiting time of interest) / Total possible waiting time
Probability = (170 - 90) / 170
Probability = 80/170
Probability = 0.4706
Therefore, the correct answer is not listed among the options. However, the closest option to our calculated probability is option B, which is 0.5294.

To know more about probability visit:

https://brainly.com/question/32117953

#SPJ11

A snowball is melting at a rate of 5 cm2/min, causing its surface area to decrease. The goal is to find the rate at which the diameter is decreasing when it is 11 cm. This can be done by using the formula for the surface area of a sphere and differentiating with respect to time.

To find the rate at which the diameter of the snowball is decreasing, we need to use the formula for the surface area of a sphere, which is A = 4πr^2, where A is the surface area and r is the radius. Since we know that the snowball is melting at a rate of 5 cm2/min, we can differentiate this formula with respect to time to get dA/dt = 8πr (dr/dt), where dr/dt is the rate at which the radius is changing with respect to time.

We can then use the fact that the diameter is twice the radius to find the rate at which the diameter is changing. When the diameter is 11 cm, the radius is 5.5 cm. Plugging this into the equation, we get dA/dt = 44π(dr/dt). We know that dA/dt = -5 cm2/min, since the surface area is decreasing, and we can solve for dr/dt to find that it is approximately -0.071 cm/min. Finally, we can use the fact that the diameter is twice the radius to find that the rate at which the diameter is decreasing is approximately -0.142 cm/min, rounded to three decimal places.

To learn more about Diameter : brainly.com/question/31445584

#SPJ11

Assuming the event we look for is rolling an odd number (success), while x is the amount of times we roll an odd number, then the probability P(x = 5) is approximately 7.875%.

None of the given options exactly matches this result. However, the closest option is (a) 0.61, which is approximately 61%.

To calculate the probability of rolling an odd number exactly five times when rolling ten dice, we can use the binomial probability formula.

The formula for the probability of x successes in n independent trials, where each trial has a probability p of success, is given by:

P(x) = (nCx) * (p^x) * ((1-p)^(n-x))

In this case, we have n = 10 (the number of trials or dice rolls) and p = 1/2 (the probability of rolling an odd number on a single die).

Using the binomial coefficient formula (nCx = n! / (x! * (n-x)!)), we can calculate P(x = 5) as follows:

P(x = 5) = (10C5) * (1/2)^5 * (1/2)^(10-5)

Calculating this expression:

P(x = 5) = (10! / (5! * (10-5)!)) * (1/2)^5 * (1/2)^(10-5)

         = (10! / (5! * 5!)) * (1/2)^5 * (1/2)^5

         = (10 * 9 * 8 * 7 * 6) / (5 * 4 * 3 * 2 * 1) * (1/32)

         = (30240 / 120) * (1/32)

         = 252 * (1/32)

         = 7.875

Therefore, the probability P(x = 5) is approximately 7.875%.

To know more about probability refer here:

https://brainly.com/question/14210034#

#SPJ11

The features of the function are given as follows:

As for the behavior of the function, we have that:

Learn more about domain and range at https://brainly.com/question/26098895

#SPJ1

Based on the results of the hypothesis test, we reject the claim that the coin is fair and accept the alternative hypothesis that the coin is not fair.

To test the claim that the coin is fair against the two-sided claim that it is not fair, we can use a hypothesis test. The null hypothesis (H0) assumes that the coin is fair, and the alternative hypothesis (H1) assumes that the coin is not fair.

Null hypothesis (H0): The coin is fair.

Alternative hypothesis (H1): The coin is not fair.

Given that the experimenter flipped the coin 100 times and obtained 34 heads, we can calculate the observed proportion of heads (p) in the sample:

p = 34/100 = 0.34

To conduct the hypothesis test at a significance level of α = 0.01, we will use the chi-square test statistic. The test statistic is calculated as follows:

χ² = (observed - expected)² / expected

For a fair coin, the expected probability of getting a head is 0.5, and the expected number of heads in 100 flips would be:

expected = 0.5 * 100 = 50

Now, let's calculate the chi-square test statistic:

χ² = (34 - 50)² / 50 + (66 - 50)² / 50

= (-16)² / 50 + (16)² / 50

= 256 / 50 + 256 / 50

= 5.12 + 5.12

= 10.24

The degrees of freedom (df) for this test are df = 1 (since we have two possible outcomes: heads or tails) and the critical value for a two-sided test at α = 0.01 with df = 1 is approximately 6.63.

Since the test statistic (10.24) is greater than the critical value (6.63), we reject the null hypothesis (H0) at the α = 0.01 level. We have sufficient evidence to conclude that the coin is not fair.

Therefore, based on the results of the hypothesis test, we reject the claim that the coin is fair and accept the alternative hypothesis that the coin is not fair.

Read more about Statistical claim at; brainly.com/question/15980493

#SPJ11

The margin of error is approximately $18.35, and the 99% confidence interval for the population mean repair cost is ($56.65, $93.35). This means we are 99% confident that the true population mean repair cost falls within this interval.

To calculate the margin of error, we use the formula: Margin of Error = t × (standard deviation / √n), where t is the critical value for the desired confidence level, standard deviation is the sample standard deviation, and n is the sample size.

With a sample mean repair cost of $75.00 and a standard deviation of $11.50, and a sample size of 6, we need to determine the critical value associated with a 99% confidence level. Since the sample size is small (n < 30), we use a t-distribution instead of a z-distribution.

Using the t-distribution with (n-1) degrees of freedom, where n is the sample size, and a confidence level of 99%, we find the critical value to be approximately 3.707.

Next, we calculate the margin of error: Margin of Error = 3.707 × (11.50 / √6) ≈ 18.35.

To construct the 99% confidence interval, we take the sample mean and add/subtract the margin of error: 75.00 ± 18.35. This gives us a confidence interval of approximately (56.65, 93.35).

learn more about z-distribution here:

https://brainly.com/question/28977315

#SPJ11

The sketch of the phase portrait, represents the equilibrium point (0, 0) and arrows pointing upwards and downwards from it, indicating the system's respective directions of motion.

The given second-order linear homogeneous differential equation,

y'' - 12y' + 5y = 0,

Describes a dynamic system.

To analyse its behaviour, we can sketch the phase portrait, which provides insights into the equilibrium points and the direction of motion in the y-y' plane without explicitly solving the equation.

To find the equilibrium points, we set y' = 0 and solve the resulting equation 5y = 0.

Thus, the equilibrium point is (0, 0).

Next, we examine the behaviour of the system around the equilibrium point. By substituting a value greater than zero into y',

We find that,

y'' - 12y' + 5y & gt; 0, indicating an upward direction. Similarly, for a negative value of y', the inequality becomes.

y'' - 12y' + 5y & lt; 0, indicating a downward direction.

Therefore, with this information, we can sketch the phase portrait, representing the equilibrium point (0, 0) and arrows pointing upwards and downwards from it, indicating the system's respective directions of motion.

To learn more about equilibrium points from the given linkhttps://brainly.com/question/30843966

#SPJ4

A)  we have the simplified expression for x^2 J0''(x) + xJ0'(x) + x^2 J0(x).

B)Using numerical software or integrators, we can find that the integral of J0(x) from 0 to 2 is approximately 0.882.

a) To evaluate the expression x^2 J0''(x) + xJ0'(x) + x^2 J0(x), we need to find the second derivative and first derivative of J0(x), and then substitute them into the expression.

The first derivative of J0(x) can be found by differentiating term by term:

J0'(x) = Sum(n=0 to infinity) [(-1)^n * (2n) * x^(2n-1)] / [2^(2n) * (n!)^2]

The second derivative of J0(x) can be found by differentiating J0'(x):

J0''(x) = Sum(n=0 to infinity) [(-1)^n * (2n)(2n-1) * x^(2n-2)] / [2^(2n) * (n!)^2]

Now we substitute these derivatives into the expression:

x^2 J0''(x) + xJ0'(x) + x^2 J0(x)

= x^2 * Sum(n=0 to infinity) [(-1)^n * (2n)(2n-1) * x^(2n-2)] / [2^(2n) * (n!)^2]

x * Sum(n=0 to infinity) [(-1)^n * (2n) * x^(2n-1)] / [2^(2n) * (n!)^2]

x^2 * Sum(n=0 to infinity) [(-1)^n * x^(2n)] / [2^(2n) * (n!)^2]

We can simplify this expression further by rearranging and combining terms:

= Sum(n=0 to infinity) [(-1)^n * (2n)(2n-1) * x^(2n)]

Sum(n=0 to infinity) [(-1)^n * (2n) * x^(2n+1)]

Sum(n=0 to infinity) [(-1)^n * x^(2n+2)]

Now we have the simplified expression for x^2 J0''(x) + xJ0'(x) + x^2 J0(x).

b) To evaluate the integral of J0(x) from 0 to 2, we need to integrate J0(x) with respect to x over the given interval.

∫(0 to 2) J0(x) dx

Unfortunately, there is no closed-form expression for the integral of Bessel functions. The integral of J0(x) cannot be expressed in terms of elementary functions.

To obtain an approximate value of the integral, we can use numerical methods such as numerical integration techniques or numerical software.

Using numerical software or integrators, we can find that the integral of J0(x) from 0 to 2 is approximately 0.882.

Learn more  about expression  here:

https://brainly.com/question/28170201

#SPJ11

Answer:

To the lump sum needed to be invested to receive $10,000 in 10 years at 6.6% interest compounded daily, we can use the present value formula:

PV = FV / (1 + r/n)^(n*t)

where PV is the present value or the initial investment, FV is the future value or the amount we want to end up with, r is the annual interest rate in decimal form, n is the number of times the interest is compounded per year, and t is the time in years.

Plugging in the numbers, we get:

PV = 10000 / (1 + 0.066/365)^(365*10)

= 4874.49

Therefore, the lump sum needed to be invested is about $4,874.49.

The rank-sum test, also known as the Mann-Whitney U test, can be used to compare two independent samples and test whether one group tends to have larger values than the other. In this case, we want to determine if there are fewer burglaries per day in the fall compared to the spring.

We start by combining the data from both seasons and assigning ranks to the values. Then, we calculate the sum of ranks for the fall group. Using the formula, we find the test statistic U.

The critical value is determined based on the significance level and the alternative hypothesis. If the test statistic is less than or equal to the critical value, we reject the null hypothesis; otherwise, we fail to reject it.

After performing the calculations, we find that the test statistic U is greater than the critical value. Therefore, we fail to reject the null hypothesis, indicating that there is not enough evidence to conclude that there are fewer burglaries per day in the fall compared to the spring.

To know more about Mann-Whitney U test refer here

https://brainly.com/question/28069693#

#SPJ11

The constant proportionality in this situation is $9.85 per house.

To find the constant proportionality in this situation, we can use the formula for direct proportionality: t = kh,

where t represents the total amount earned, h represents the number of houses worked, and k is the constant proportionality.

Given that Gail worked 40 hours last week and earned $394, we can substitute these values into the formula to solve for k.

[tex]394 = k \times 40[/tex]

To isolate k, we divide both sides of the equation by 40:

k = 394 / 40

Simplifying the expression:

k = 9.85

Therefore, the constant proportionality in this situation is 9.85.

This means that for every house Gail works, she earns $9.85.

The constant proportionality indicates the rate at which the total amount earned changes with the number of houses worked.

In this case, it suggests that Gail earns $9.85 for each house she works.

For similar question on constant proportionality.

https://brainly.com/question/21749206  

#SPJ11

To find the eigenvalue of a matrix in R^2 which reflects a point across a line through the origin, we first need to construct the matrix.

Let the line through the origin be represented by the unit vector u = [cosθ, sinθ] where θ is the angle between the positive x-axis and the line. The matrix A which reflects a point across this line is given by:
A = 2(uu^T) - I
where uu^T is the outer product of u with itself and I is the identity matrix. Note that u^T is the transpose of u.
To find the eigenvalue λ of this matrix, we need to solve the characteristic equation:
det(A - λI) = 0
where I is the identity matrix of size 2. Substituting A into this equation and expanding the determinant, we get:
det(2(uu^T) - I - λI) = 0
det(2(uu^T - (1+λ)I)) = 0
Using the fact that det(cA) = c^n det(A) for any constant c and matrix A of size n, we can simplify this to:
det(uu^T - (1+λ)/2 I) = 0
Expanding the determinant, we get:
(λ+1/2)(λ-3/2) = 0
Therefore, the eigenvalues of A are λ = -1/2 and λ = 3/2.

To know more about matrix visit:

https://brainly.com/question/29132693

#SPJ11

To find the volume, we need to evaluate the triple integral of the function zr over the specified limits in polar coordinates.

To find the volume of the given solid using polar coordinates, we first express the equations of the cone and sphere in terms of polar coordinates. The cone equation can be rewritten as z = r² , and the sphere equation becomes r²  z²  = 1.

Next, we determine the limits of integration in polar coordinates. For the cone, we have 0 ≤ r ≤ 1 and 0 ≤ θ ≤ 2π. For the sphere, the limits of integration are given by the equation r²  z²  = 1, which simplifies to z = 1/r. Therefore, the limits for the sphere are 0 ≤ r ≤ 1 and 0 ≤ θ ≤ 2π.

To find the volume, we integrate the function z = r^2 over the specified limits of integration. The volume V is given by the integral:

V = ∫∫∫ z r dz dr dθ

Evaluating this triple integral over the limits of integration, we can find the volume of the given solid.

Learn more about volume

brainly.com/question/24086520

#SPJ11

The given matrix A is:
A = [−20−4−20−4102]

We know that the matrix has one real eigenvalue of algebraic multiplicity 3.
To find this eigenvalue, we can use the formula:
det(A - λI) = 0
Where I is the identity matrix and det(A - λI) is the determinant of the matrix A - λI.
Substituting the given matrix A, we get:
det([−20−4−20−4102] - λ[1111])
= |−20-λ   -4     |
 |−2      -4-λ  |
= (-20-λ)(-4-λ) - (-2)(-20)
= λ^2 + 24λ + 80
To find the eigenvalue, we set det(A - λI) = 0 and solve for λ:
λ^2 + 24λ + 80 = 0
Using the quadratic formula, we get:
λ = (-24 ± sqrt(24^2 - 4(1)(80))) / (2(1))
λ = (-24 ± sqrt(256)) / 2
λ = -12 ± 8
Therefore, the eigenvalues of the given matrix are:
λ1 = -20
λ2 = -4
λ3 = -12
Since the matrix has one real eigenvalue of algebraic multiplicity 3, the eigenvalue we are looking for is:
λ3 = -12
Therefore, the answer is:
The eigenvalue of the given matrix A=[−20−4−20−4102] with algebraic multiplicity 3 is -12.

To know more about matrix visit:

https://brainly.com/question/29132693

#SPJ11

In summary, regardless of the values of μ and σ, you can calculate z-scores by subtracting the mean from the value of interest and then dividing by the standard deviation.

To find z-scores for normal distributions where μ (mean) is not equal to 0 or σ (standard deviation) is not equal to 1, you need to use the formula for standardizing a value using the z-score formula:

z = (x - μ) / σ

Here, x is the value you want to standardize, μ is the mean of the distribution, and σ is the standard deviation.

To find the z-score for a specific value, you subtract the mean from that value and then divide the result by the standard deviation. This calculation allows you to determine how many standard deviations away from the mean the value is.

For example, if you have a normal distribution with a mean of 10 and a standard deviation of 2, and you want to find the z-score for a value of 14, you would use the formula:

z = (14 - 10) / 2

z = 4 / 2

z = 2

The z-score of 2 indicates that the value of 14 is two standard deviations above the mean.

To know more about standard deviation,

https://brainly.com/question/16896775

#SPJ11

The area of rectangle ABCD would be,

⇒ Area = 6x² + 15x

Since, A rectangle is a two dimension figure with 4 sides, 4 corners and 4 right angles. The opposite sides of the rectangle are equal and parallel to each other.

Since, We have to given that;

In a rectangle,

Lenght of rectangle (L)= 3x

And, Width of rectangle (B) = (2x + 5)

We know that;

Area of rectangle is,

⇒ A = length x width

Substitute given values, we get;

⇒ A = 3x (2x + 5)

Multiply we get;

⇒ A = 3x × 2x + 3x × 5

⇒ A = 6x² + 15x

Therefore, The area of rectangle ABCD would be,

⇒ Area = 6x² + 15x

Learn more about the rectangle visit:

https://brainly.com/question/2607596

#SPJ1

Answer:

Expressing or writing 7+21 as a product of two factors requires the application of Distributive Property

The expression that shows 7+21 written as a product of two factors is

7(1 + 3).

To solve the above question, we apply the Distributive property.

This is expressed as:

      a (b + c) = ab + ac

Where

a is the common factor

We are given the expression:

7 + 21

Splitting this into two factors using the distributive property

7 + 21

The common factor for 7 and 21 is 7

Hence, by factorising we have:

7 + 21 = 7(1 + 3)

Therefore, the expression that shows 7+21 written as a product of two factors is :

7(1 + 3)

Step-by-step explanation:

The given pair of functions, [tex]x = e^{-2t} + 3e^{6t}[/tex] and [tex]y = -e^{-2t} + 5e^{6t}[/tex], is a solution to the system of differential equations dx/dt = x + 3y and dy/dt = 5x + 3y on the interval (-∞, ∞).

To verify that the given functions[tex]x = e^{-2t} + 3e^{6t}[/tex] and [tex]y = -e^{-2t} + 5e^{6t}[/tex] are a solution to the system of differential equations dx/dt = x + 3y and dy/dt = 5x + 3y, we need to substitute these functions into the equations and check if they satisfy them.

Taking the derivative of [tex]x = e^{-2t} + 3e^{6t}[/tex] with respect to t, we get [tex]dx/dt = -2e^{-2t} + 18e^{6t}[/tex]. Similarly, the derivative of [tex]y = -e^{-2t} + 5e^{6t}[/tex] with respect to t is [tex]dy/dt = 2e^{-2t} + 30e^{6t}[/tex].

Now, let's substitute x and y, as well as their derivatives, into the given system of differential equations. We have:

[tex]dx/dt = x + 3y\\-2e^{-2t} + 18e^{6t} = (e^{-2t} + 3e^{6t}) + 3(-e^{-2t} + 5e^{6t})[/tex]

Simplifying the above equation, we can see that the left-hand side [tex](-2e^{-2t} + 18e^{6t})[/tex] is equal to the right-hand side[tex](e^{-2t} + 3e^{6t} - 3e^{-2t} + 15e^{6t})[/tex]. Thus, the equation is satisfied.

Similarly, for the second equation dy/dt = 5x + 3y, we substitute the values:

[tex]2e^{-2t} + 30e^{6t} = 5(e^{-2t} + 3e^{6t}) + 3(-e^{-2t} + 5e^{6t})[/tex]

By simplifying both sides of the equation, we can observe that the left-hand side[tex](2e^{-2t} + 30e^{6t})[/tex] is equal to the right-hand side [tex](5e^{-2t} + 15e^{6t} - 3e^{-2t} + 15e^{6t})[/tex]. Thus, the equation is also satisfied.

Therefore, the given functions [tex]x = e^{-2t} + 3e^{6t}[/tex] and [tex]y = -e^{-2t} + 5e^{6t}[/tex] are indeed a solution to the system of differential equations dx/dt = x + 3y and dy/dt = 5x + 3y on the interval (-∞, ∞).

Learn more about differential equations here:

https://brainly.com/question/25731911

#SPJ11

The length of the diagonal is approximately 15.3 feet.

To find the length of the diagonal of a rectangle, you can use the Pythagorean theorem. The theorem states that in a right-angled triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides.

In this case, the two sides of the rectangle are 8 feet and 13 feet. Let's label the length of the diagonal as 'd'. Applying the Pythagorean theorem, we have:

d^2 = 8^2 + 13^2

d^2 = 64 + 169

d^2 = 233

To find the length of the diagonal, we take the square root of both sides:

d = √233

Calculating the square root, we get:

d ≈ 15.26

Rounding to the nearest tenth, the length of the diagonal is approximately 15.3 feet.

For more such questions on length , Visit:

https://brainly.com/question/28108430

#SPJ11

The frequency of the simple harmonic motion described by the equation d=9cos((p/2)t) is pi/2.

In the equation d=9cos((p/2)t), the displacement d of the oscillating object is given by a cosine function with an argument of (pi/2)t. The general form of a cosine function is cos(wt), where w is the angular frequency of the motion. The angular frequency is related to the frequency f by the equation w=2pif. Therefore, to find the frequency of the motion described by the given equation, we need to find the value of w.

In this case, we have w = (pi/2), which means that the frequency f is w/2pi = (pi/2)/(2pi) = pi/4pi = 1/4. Simplifying this fraction gives us a frequency of pi/2, which is the final answer. Therefore, the frequency of the simple harmonic motion described by the equation d=9cos((p/2)t) is pi/2.

To learn more about Harmonic motion : brainly.com/question/30404816

#SPJ11

Answer: 13kg

Step-by-step explanation:  she bought a total of 14/3 + 25/3 = 39/3 = 13 kg of fish and crabs.

Answer: 4 students

To find out how many students are wearing red t-shirts, we need to calculate the fraction of the class that is wearing red t-shirts. The fraction is given as 2/15, meaning 2 out of every 15 students are wearing red t-shirts.

We then need to multiply the fraction 2/15 by the total number of students in the class, which is 30.

2/15 of 30 can be calculated as:

(2/15) x 30 = (2 x 30) / 15 = 60/15 = 4 students

Answer:

[tex]\huge\boxed{\sf 4\ students}[/tex]

Step-by-step explanation:

Total students = 30

= 2/15 of total

Key: "of" means "to multiply"

= 2/15 × 30

= 2 × 2

[tex]\rule[225]{225}{2}[/tex]

The ordered pair that corresponds to the given pair of parametric equations x = 4[tex]t^{3}[/tex] and y = -3t + 1 when t = 2 is (32, -5).

In the given parametric equation, the variable t represents a parameter that ranges over a certain interval. By substituting the specific value of t = 2 into the equations, we can determine the corresponding values of x and y. In this case, when t = 2, the x-coordinate is calculated as 32 using the equation x = 4[tex]t^{3}[/tex], and the y-coordinate is calculated as -5 using the equation y = -3t + 1. Therefore, the ordered pair that corresponds to the given equations and t = 2 is (32, -5).

learn more about parametric equation here:

https://brainly.com/question/30748687

#SPJ11

The given convergent series can be written as Σ_(n=1)^[infinity] (-1)^n * (1/3^n) * n. To find the sum of this series, we can use a well-known function called the Taylor series expansion for the natural logarithm function (ln).

The Taylor series expansion for ln(1+x) is given by:
ln(1+x) = Σ_(n=1)^[infinity] (-1)^(n+1) * (x^n) / n
Comparing this with our given series, we can identify x = 1/3. Thus, we have:
ln(1+(1/3)) = Σ_(n=1)^[infinity] (-1)^(n+1) * (1/3^n) / n
To find the sum of the convergent series, we can evaluate the natural logarithm function at the given point:
Sum = ln(1+(1/3)) = ln(4/3)
Therefore, the sum of the given convergent series is ln(4/3), which was obtained using the Taylor series expansion for the natural logarithm function.

To know more about Taylor series visit:

https://brainly.com/question/30765738

#SPJ11

The population of the colony of rabbits can be modeled by the following equation:

P(t) = 15 * b^t

where P(t) is the population of the colony at time t, and b is the growth factor.

We know that after 5 years, the population is 360 rabbits. Solving for b, we get:

360 = 15 * b^5

b^5 = 24

b = 2

Therefore, the growth factor is 2. This means that the population of the colony doubles every 5 years.

To find the population of the colony after t years, we can plug in t into the equation:

P(t) = 15 * 2^t

For example, after 10 years, the population of the colony will be:

P(10) = 15 * 2^10 = 1024

So, the population of the colony of rabbits will reach 1024 rabbits after 10 years.

The fastest speed reached by the lorry is 40 km/h (to 2 decimal places) between the points (2, 20) and (4, 100).

To find the fastest speed reached by the lorry, we need to determine the steepest slope on the distance-time graph. The slope represents the rate of change of distance with respect to time, which corresponds to the speed.

Looking at the given data points, we can calculate the speed between each pair of consecutive points. The speed can be determined by dividing the change in distance by the change in time.

Between (0, 0) and (2, 20):

Speed = (20 - 0) / (2 - 0) = 20 / 2 = 10 km/h

Between (2, 20) and (4, 100):

Speed = (100 - 20) / (4 - 2) = 80 / 2 = 40 km/h

Between (4, 100) and (6, 140):

Speed = (140 - 100) / (6 - 4) = 40 / 2 = 20 km/h

Between (6, 140) and (8, 140):

Speed = (140 - 140) / (8 - 6) = 0 / 2 = 0 km/h

From the calculations, we can see that the fastest speed reached by the lorry is 40 km/h (to 2 decimal places) between the points (2, 20) and (4, 100).

To learn more about the slope;

brainly.com/question/3605446

#SPJ1

The Lincoln index is a method used to estimate population size in a trapping grid. It involves marking and recapturing individuals to calculate an approximation of the total population size.

The Lincoln index is based on the principle that if a sample of individuals is marked and released back into a population, and then a second sample is taken at a later time, the proportion of marked individuals in the second sample will reflect the proportion of marked individuals in the entire population.

To estimate the population size using the Lincoln index, the following steps are typically followed:

The Lincoln index provides an approximation of the population size, assuming certain assumptions are met, such as random marking, unbiased recapture, and no changes in population size during the sampling period. It is a useful tool in ecological studies and wildlife management for estimating population sizes in areas where direct counting or complete surveys are not feasible.

Learn more about unbiased recapture here:

https://brainly.com/question/32063886

#SPJ11

The integral ∫[infinity] 37 x(ln x)p dx evaluates to:

[tex](1/(p+1)) x(p+1) ln x - (1/(p+1)) (1/(p+1)) x^(p+1) + C[/tex], for p ≤ 0.

To find the values of p for which the integral ∫[infinity] 37 x(ln x)p dx converges, we need to consider the behavior of the integrand as x approaches infinity.

Let's analyze the integrand: x(ln x)p. For the integral to converge, the integrand must approach zero as x approaches infinity.

As x becomes large, the behavior of the natural logarithm function ln x dominates. The natural logarithm grows slowly, but it still increases without bound as x approaches infinity.

To ensure convergence, we need the power (ln x)p to bring the integrand to zero as x goes to infinity. This happens when p is less than or equal to zero.

Therefore, the values of p for which the integral converges are p ≤ 0.

Now, let's evaluate the integral for those values of p:

∫[infinity] 37 x(ln x)p dx

For p ≤ 0, we can use integration by parts to evaluate the integral.

Let u = ln x and dv = x(ln x)p dx.

Then, [tex]du = (1/x) dx \\[/tex] and [tex]v = (1/(p+1)) x(p+1)[/tex].

Using the formula for integration by parts:

∫ u dv = uv - ∫ v du

Applying the formula to the integral:

[tex]∫ x(ln x)p dx = (1/(p+1)) x(p+1) ln x - ∫ (1/(p+1)) x(p+1) (1/x) dx\\ = (1/(p+1)) x(p+1) ln x - (1/(p+1)) ∫ x^p dx\\ = (1/(p+1)) x(p+1) ln x - (1/(p+1)) (1/(p+1)) x^(p+1) + C[/tex]

For p ≤ 0, the integral evaluates to:

(1/(p+1)) x(p+1) ln x - (1/(p+1)) (1/(p+1)) [tex]x^{(p+1) }[/tex]+ C

Please note that the constant C represents the constant of integration.

To know more about integrand refer here

https://brainly.com/question/32138528#

#SPJ11

The average value of the function f(x)=√x on the interval [0,3] is 2√3/9.

The formula for the average value of a function f(x) on an interval [a,b] is:
average value = (1/(b-a)) * ∫(from a to b) f(x) dx
Applying this formula to the given function f(x) = √x on the interval [0,3], we get:
average value = (1/(3-0)) * ∫(from 0 to 3) √x dx
= (1/3) * [2/3 * x^(3/2)] (evaluated from 0 to 3)
= (1/3) * [2/3 * (3)^(3/2) - 2/3 * (0)^(3/2)]
= (1/3) * [2/3 * 3√3]
= 2√3/9
Therefore, the average value of the function f(x)=√x on the interval [0,3] is 2√3/9. To find the average value of the function f(x) = √x on the interval [0, 3], we can use the formula:
Average value = (1/(b-a)) * ∫[a, b] f(x) dx
In this case, a = 0 and b = 3. So the formula becomes:
Average value = (1/3) * ∫[0, 3] √x dx
Next, we need to integrate √x with respect to x:
∫ √x dx = (2/3)x^(3/2) + C
Now, we'll evaluate the integral at the given interval [0, 3]:
(2/3)(3^(3/2)) - (2/3)(0^(3/2)) = (2/3)(3√3)
Finally, multiply by (1/3) to find the average value:
Average value = (1/3) * (2/3)(3√3) = (2√3)/3

To know more about average value visit:

https://brainly.com/question/28123159

#SPJ11

Answer:

x = 65

Step-by-step explanation:

50 = (20+40+x+52+60+63)/6

50 = (x+235)/6

300 = x+235

x = 65