find the volume of the 2 dice if the length of the base of the cube is 4cm

A) 64cm cubed
B) 96cm cubed
C) 108cm cubed
D) 128cm cubed​

Answer:

The first option.

Step-by-step explanation:

Add all the numbers together and voila you get 27

Answer:

d. 9

Step-by-step explanation:

i friken used all my attempts guessing on this and got it wrong all times so 9 is the last answer

(a) The Y-intercept, bo = 6, implies that when the value of X is 0, the mean value of Y is 6.

(b) The slope, by = 4, implies that for each increase of 1 unit in X, the value of Y is expected to increase by 4 units.

(c) The mean value of Y for X = 4 is predicted to be 22.

The Y-intercept, bo, represents the starting point of the prediction line. In this case, when X is 0, the mean value of Y is expected to be 6. This implies that before any increase or decrease in X, the average value of Y starts at 6.

The slope, by = 4, indicates the rate at which Y is expected to change for each unit increase in X. Therefore, for every 1 unit increase in X, the value of Y is expected to increase by 4 units. This implies a linear relationship between X and Y, where the increase or decrease in X directly influences the corresponding change in Y.

To predict the mean value of Y for X = 4, we can use the prediction line equation: Y = 6 + 4x. Substituting X = 4 into the equation, we get: Y = 6 + 4(4) = 6 + 16 = 22. Therefore, the mean value of Y for X = 4 is predicted to be 22.

Learn more about intercept

brainly.com/question/14886566

#SPJ11

Answer:

C

24Step-by-step explanation:

Trust me on this one.

The approximately 59.90 percent of the observations differ from the mean by less than 0.56o.

The standard deviation is a measure of the amount of variation or dispersion in a set of observations.

For a normal distribution, it is straightforward to determine the proportion of values that are more than a certain number of standard deviations above or below the mean.

Here's how to determine the percentage of observations that differ from the mean by more than 2.50 or less than 0.56o in a normally distributed set of observations.

Solution:

(a)  The percentage of observations that differ from the mean by more than 2.50 is given by the formula below:P(Z > 2.50) + P(Z < -2.50) = 0.00621 + 0.00621 = 0.0124

To obtain the proportion in percentage, multiply by 100: 0.0124 * 100 = 1.24%.

Therefore, about 1.24 percent of the observations differ from the mean by more than 2.50.

(b) The proportion of observations that differ from the mean by less than 0.56o is given by:

P(-0.56/σ < Z < 0.56/σ) = P(Z < 0.84) − P(Z < -0.84) = 0.7995 - 0.2005 = 0.5990

To obtain the proportion in percentage, multiply by 100: 0.5990 * 100 = 59.90%.

To know more about standard deviation :

https://brainly.com/question/29115611

#SPJ11

If a set of observations is normally distributed.

Therefore, about 0.62% of the observations differ from the mean by more than 2.50.

About 29.24% of the observations differ from the mean by less than 0.56.

Solution: (a) If a set of observations is normally distributed, then the percentage of observations that differ from the mean by more than 2.50 is given by:

This is calculated using the z-score formula: where x is the observation value, μ is the mean of the distribution, and σ is the standard deviation of the distribution. When we substitute the values of the given parameters, we get: Therefore, about 0.62% of the observations differ from the mean by more than 2.50.

(b) Similarly, the percentage of observations that differ from the mean by less than 0.56 is given by: This is calculated using the z-score formula: When we substitute the values of the given parameters, we get: Therefore, about 29.24% of the observations differ from the mean by less than 0.56.

To know more about percentage visit

https://brainly.com/question/2724587

#SPJ11

The degree of precision of a quadrature formula whose error term is h4/120 f(5)) is 4. Option a is the correct answer.

The degree of precision of a quadrature formula measures how many terms of the Taylor series can be reproduced by the formula. It is also known as the order of the formula or the number of nodes used in the quadrature.

The degree of precision of a quadrature formula that produces a zero error on all polynomials of degree less than or equal to n is n.

Therefore, the degree of precision for this quadrature formula is 4, indicating its accuracy in approximating integrals involving functions up to the fourth degree. The correct option is a.

To know more about quadrature formula refer here:

https://brainly.com/question/32699023

#SPJ11

Complete question

The degree of precision of a quadrature formula whose error term is h4 120 f(5)) is:

Option a - 4

Option b - 2

Option c-  3

Option d- 5

Given a 3x3 matrix A with eigenvalues -1 and 3, and corresponding eigenvectors V1 = [-1, 3, -1] and V2 = [0, 2, 3], we can determine various products and properties of the matrix A.

(a) To find the product Av2, we simply multiply the matrix A by the vector V2. The resulting product is [0, 2, 10].

(b) To find the product A(3v1 - v3), we first calculate 3v1 - v3, which is equal to [-4, -10, 6]. Then, we multiply the matrix A by this vector to obtain the product [-4, -10, 10].

(c) Two eigenvectors corresponding to the eigenvalue -1 can be identified as V1 = [-1, 3, -1] and any scalar multiple of V1, such as [2, -6, 2].

(d) To determine if A is diagonalizable, we check if it has three linearly independent eigenvectors. In this case, A has two distinct eigenvalues (-1 and 3), and we are given that the eigenspace corresponding to each eigenvalue has a basis with two vectors in total. Since the sum of the dimensions of the eigenspaces is equal to the dimension of A (3), A is diagonalizable.

To diagonalize A, we construct a matrix P with the eigenvectors as its columns. We have P = [V1, V2, V3] = [-1, 0, 2; 3, 2, -6; -1, 3, 2]. Then, we calculate P-1 and find D, the diagonal matrix of eigenvalues: D = diag(-1, 3). Finally, we obtain the diagonalized form P-1AP = D, where P-1 is the inverse of matrix P.

Learn more about eigenvalue here:

https://brainly.com/question/32575123

#SPJ11

Answer:

Its right infront of you.....

1/5

Step-by-step explanation:

Answer:

2. n(2n+5)=26.

Step-by-step explanation:

If Sam has n stamps, and Nate has 5 more than twice that amount, the equation would be: 2. n(2n+5)=26.

Answer:

4/5 to 80%

7/20 to 35%

9/4 to 225%

25/1000 to 2.5%

Step-by-step explanation:

i)

The graph is attached  as an image.

ii.)  We notice that all the lines have the same slope of 2 which shows a consistent rate of change

A graph is described as as the pictorial representation of that represents any given data in a chronological manner that is ascending to descending type.

1. y =2x+8

x = 1

Y = 2(1)+8

Y= 2+8

Y = 10

2. y =2x + 2

x=2

Y= 2(2) +2

=4+2

Y=6

3. y= 2x – 3

x = 3

Y = 2(3) -3

Y= 6-3

Y=3

4. y = 2x -6

x=4

Y = 2(4) -6

Y= 8-6

Y=2

Learn more about graphs at:

https://brainly.com/question/19040584

#SPJ1

Answer:

a) x-intercepts at -6 and 2

b) y-intercept at -12

c) minimum at (-2, -16)

Step-by-step explanation:

Answer: See explanation

Step-by-step explanation:

Total number of children = 369

Percentage of children on museum trip = 20%

Number of children on museum trip = 20/100 × 369

= 1/5 × 369

= 73.8 = 74 approximately

Number of children in school = 369 - 73.8 = 295.2 = 295 approximately

Answer:

C

Step-by-step explanation:

basically see where each dot is and the number its beside and the number its above answer for example the first one is in between 20 and 30 so its 25 and its above 1  so it would 1, 25 u just do that for all the dots :)

Answer:

Altitude of the right triangle is 4 cm.

Step-by-step explanation:

The altitude divides the right triangle's hypotenuse as 2 cm and 8 cm long.Let's use formula for similar right triangles proportional equation.I'll show you the diagram with steps.

To represent this situation, we can use the following equation:x = the number of packs of stickers Isabella bought x packs of stickers, and each pack costs $3.

So the total cost of the stickers is given by the following equation:3x = total cost of stickers Since she spent a total of $18 on stickers, we can set the equation equal to 18 to get:3x = 183x/3 = 18/3x = 6Therefore, Isabella bought 6 packs of stickers to give to her friends.

To solve this problem, let's assume that Isabella bought "x" packs of stickers.

According to the given information, each pack costs $3. So, the total amount Isabella spent on stickers is $18.

We can represent this situation with the following equation:

3x = 18

Here, "3x" represents the cost of "x" packs of stickers, and it is equal to $18.

To find the number of packs Isabella bought, we can solve the equation for "x".

Dividing both sides of the equation by 3, we get:

x = 18 / 3

x = 6

Therefore, Isabella bought 6 packs of stickers.

To know more about equation ,Visit:

https://brainly.com/question/29174899

#SPJ11

The given information is that Isabella bought packs of stickers, each pack costs $3. She spent a total of $18 on stickers. It is asked to find number of packs did she buy.

Therefore, the answer for this question is that Isabella bought 6 packs of stickers.

Let the number of packs that Isabella bought be p. Each pack costs $3, so she spent a total of $18 on stickers. Using these terms, we can set up the equation:3p = 18To solve for p, we divide both sides of the equation by 3:p = 6. Therefore, the answer for this question is that Isabella bought 6 packs of stickers.

To know more about equation visit

https://brainly.com/question/29538993

#SPJ11

Answer:

y=9

x= -2, 4

Step-by-step explanation:

Answer:

B

Step-by-step explanation:

Just put B

Answer:

false

it can have more

Answer:

Yes

What solid shape do the two nets make?

1. Rectangular Prism

2. Triangular Prism

Brainlist Pls!

Answer:

2

Step-by-step explanation:

because if 10 is the whole line of the base at the bottom of the trapezoid

and 8 is the whole top 10-8=2

Answer:

axis of symm:  x = -1

vertex:  (-1, -4)

domain:  all real numbers

range:  y ≥ -4

x-intercepts:  1, 3

y-intercept:  -3

minimum at (-1, -4)

Step-by-step explanation:

Answer:

x=10

Step-by-step explanation:

x+1=11

Answer:

X-10

Step-by-step explanation:

3(x+1)=33

3x+3=33

3x+3-3=33-3

3x=30

x=10

Answer:

14

Step-by-step explanation:

Answer:

14

Step-by-step explanation:

4+3+2+5=14

Answer:

The answer would have to be shown in your working out, so look down below for an explanation.

Step-by-step explanation:

You would make each equation with the same letter equal to each other

5x- 10= 7x-20

3y= 5y-16

Then you would solve the equations

5x-10 = 7x-20

+20        +20

5x +10= 7x

-5x        -5x

10= 2x

x= 5

-

3y = 5y-16

+16      +16

3y+16=5y

-3y       -3y

16 = 2y

y = 8

And there's  how you would prove that x=5 and y=8

Answers:

Level 1 Q:

[tex]5x+4x=90\\9x=90\\x=10[/tex]

Level 2 Q:

[tex]48+2x=90\\2x=42\\x=21[/tex]

Level 3 Q:

[tex]25+(x-18)=90\\x=83[/tex]

Answer: Decrease it’s a negative

Step-by-step explanation:

The sample space, in terms of the condition (functional or defective) of each nozzle after a year, can be represented using the symbols "f" and "d" to denote a functional and defective nozzle, respectively.

The possible outcomes in the sample space can be described as a combination of these symbols. For example, if we have three nozzles, the sample space could include outcomes such as "fff" (all three nozzles are functional), "dfd" (the first and third nozzles are functional, while the second one is defective), "ffd" (the first two nozzles are functional, while the third one is defective), and so on.

Each outcome in the sample space corresponds to a particular arrangement or configuration of functional and defective nozzles after a year. The sample space encompasses all the possible combinations and provides a comprehensive representation of the different outcomes that can occur.

To learn more about sample space, click here: brainly.com/question/30464166

#SPJ11

The general solution to the given system of differential equations is:

x(t) = c1 + c2e^tcos((√3t)/2) + c3e^tsin((√3t)/2)

y(t) = c1 + c2e^tcos((√3t)/2) + c3e^tsin((√3t)/2)

where c1, c2, and c3 are constants determined by initial conditions or specific constraints.

To solve the system using the elimination method, we need to eliminate one variable at a time. Let's start by eliminating x.

x' = x - y ...........(1)

y'' = -2x' + e^t ...........(2)

First, differentiate equation (1) with respect to t to get:

x'' = x' - y' ...........(3)

Now substitute the value of x' from equation (3) into equation (2):

y'' = -2(x' - y) + e^t

y'' = -2x' + 2y + e^t ...........(4)

To eliminate x', we subtract equation (4) from equation (2):

y'' - y' = e^t ...........(5)

Next, differentiate equation (5) with respect to t:

y''' - y'' = e^t ...........(6)

Now we have two equations:

y'' - y' = e^t ...........(5)

y''' - y'' = e^t ...........(6)

To solve these equations, we can solve equation (6) for y'' and substitute it into equation (5):

(y''' - e^t) - (y'' - y') = e^t

y''' - y'' + y' - e^t = e^t

y''' - y'' + y' = 2e^t ...........(7)

Equation (7) is a third-order linear homogeneous differential equation for y.

To find the general solution to equation (7), we solve its characteristic equation:

r^3 - r^2 + r = 0

Factoring out an r, we get:

r(r^2 - r + 1) = 0

This equation has one real root r = 0 and two complex roots r = (1 ± √3i)/2.

Therefore, the general solution for y is:

y(t) = c1 + c2e^tcos((√3t)/2) + c3e^tsin((√3t)/2)

Now, we can substitute the general solution for y into equation (5) to solve for x:

y'' - y' = e^t

(c2e^tcos((√3t)/2) + c3e^tsin((√3t)/2))' - (c2e^tcos((√3t)/2) + c3e^tsin((√3t)/2)) = e^t

Differentiating and simplifying, we get:

(-c2e^t(√3/2)sin((√3t)/2) + c3e^t(√3/2)cos((√3t)/2)) - (c2e^tcos((√3t)/2) + c3e^tsin((√3t)/2)) = e^t

Simplifying further, we get:

(-c2e^t(√3/2)sin((√3t)/2) + c3e^t(√3/2)cos((√3t)/2)) - c2e^tcos((√3t)/2) - c3e^tsin((√3t)/2) = e^t

Now, equating the coefficients of e^t and the trigonometric terms, we can solve for c1, c2, and c3.

This completes the solution process using the elimination method for the given system of differential equations.

To learn more about differential equations visit : https://brainly.com/question/1164377

#SPJ11

Answer:

V = 314

Step-by-step explanation:

Volume of a cone:

V = πr²(h/3)

Given:

r = 5

h = 12

Work:

V = πr²(h/3)

V = 3.14(5²)(12/3)

V = 3.14(25)(4)

V = 314

Answer:

The volume of the cone is 311.1in³.

Step-by-step explanation:

V = ⅓Bh where B = πr²

V = ⅓πr²h

V = ⅓(22/7)(5²)12

V = 0.33(3.142)(25)12

V = 311.1in³