Answer:
Experiment 1
Explanation:
I don’t know if this is right
How can we classify the group of elements by just looking at its valence configuration?
Electron configurations
Valence electrons are electrons used in forming bonds and are in the outer shell of an element.
The bond that occurs can be either an ionic bond or a covalent bond
Valence electron determination using electron configurations.
The main group elements usually have valence electron configurations in the s and p subshells
While the transition elements in the subshells (n-1) d
Further explanation
The location of the elemental groups in the periodic system is determined by the number of valence electrons filling the last sub-shell
The period of an element is determined from the valence shell (the biggest main quantum number (n) )
In an atom, there are levels of energy in the shell and subshell
This energy level is expressed in the form of electron configurations.
Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d, and f. The maximum number of electrons for each subshell is
s: 2 electrons
p: 6 electrons
d: 10 electrons and
f: 14 electrons
Charging electrons in the subshell uses the following sequence:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.
Many ski resorts and mountain cities can be reached directly by planes which deposit travelers a mile or more above sea level. This can result in altitude sickness due to hypoxemia, or reduced oxygen in the blood, caused by the unaccustomed exposure to the lower atmospheric pressure at high elevations. On a given day, the prevailing atmospheric pressure in Yellowstone, MT (elevation 2031 meters) might be 0.775 atm. Calculate this pressure expressed in mmHg and in torr.
Answer:
589 torr or mmHg.
Explanation:
We know that 1 atmospheric pressure is equal to 760 torr or 760 mmHg so calculate 0.775 atm pressure in term of mmHg and torr. We perform the following steps which is
1 atm -------- 760 torr or mmHg
0.775 atm ------- X
By cross multiplication we get
X = 760 x 0.775
X = 589 torr or mmHg
So we can conclude that if 0.775 atm is equals to 589 torr.
please help? Liquid, Chemical Properties, Compounds or Products?
Answer:
They are compounds.
Explanation:
..........
Answer:
compounds!!
Explanation:
...........
If the volume of water in a cylinder is 8.0mL, but changes to 10.0mL when a solid is carefully lowered into it, the volume of the solid is?
Answer:
2 mL.
Explanation:
From the question given above, the following data were obtained:
Volume of water = 8 mL
Volume of water + solid = 10 mL
Volume of solid =?
The volume of the solid can be obtained as follow:
Volume of solid = (Volume of water + solid) – (Volume of water)
Volume of solid = 10 – 8
Volume of solid = 2 mL
Therefore, the volume of the solid is 2 mL
A solution is prepared by mixing 50.00 mL of 0.100 M HNO3 and 100.00 ml of 0.200 M Ca(NO3)2. Calculate the molarity of the nitrate ion in the final solution.
A solution is prepared by mixing 50.00 mL of 0.100 M HNO3 and 100.00 ml of 0.200 M Ca(NO3)2. The molarity of the nitrate ion in the final solution is 0.1667 M.
What is molarity ?The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.
Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in liters, is the most widely used unit to express solution concentration: liters of solution/moles of solute equals M. One liter of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.
50.0 mL x 0.100 M
= 5.00 millimoles of HNO3
=0.00500 moles
100.0 mL x 0.200 M
= 20.0 millimoles of HNO3
=0.0200 moles
The whole solution has a volume of 150.0 mL
= 50.0+100.0
= 150
The whole solution contains 25.0 millimoles of HNO3
= 5.00+20.0
= 25
millimoles / mL = Molarity
25.0 / 150.0
= 0.1667 M
moles / Liters = Molarity
0.0250 / 0.1500
= 0.1667 M
Thus, The molarity of the nitrate ion in the final solution is 0.1667 M.
To learn more about molarity, follow the link;
https://brainly.com/question/8732513
#SPJ2
Which nuclear equation represents a spontaneous decay?
Answer:A
Explanation:
1. [tex]^{222}Rn_{86}[/tex] → [tex]^{218}Po_{84} + ^{4}He_{2}[/tex]
What is a spontaneous decay?
Spontaneous fission (SF) is a form of radioactive decay where an atom's nucleus splits into two smaller nuclei and generally one or more neutrons.Out of the given options, only option 1. [tex]^{222}Rn_{86}[/tex] → [tex]^{218}Po_{84} + ^{4}He_{2}[/tex] is an example of spontaneous decay since an atom nucleus is splitting into two daughter nuclei's.Spontaneous decay would refer to whether or not decay was stimulated by bombardment with neutrons or alphas while random decay refers to the selection of which nuclei actually decayLearn more:
brainly.com/question/1898040
How many moles would be in 85.OmL of 0.750M KOH?
Answer: There are 0.0637 moles present in 85.0 mL of 0.750 M KOH.
Explanation:
Given: Volume = 85.0 mL (1 mL = 0.001 L) = 0.085 L
Molarity = 0.750 M
It is known that molarity is the number of moles of solute present in liter of a solution.
Therefore, moles present in given solution are calculated as follows.
[tex]Molarity = \frac{moles}{Volume (in L)}\\0.750 M = \frac{moles}{0.085 L}\\moles = 0.0637 mol[/tex]
Thus, we can conclude that there are 0.0637 moles present in 85.0 mL of 0.750 M KOH.
Write the equilibrium expression for the following reactions:
1. 4NH3 (g) + 5O2 (g) ↔ 4NO (g) +6H2O (g)
2. ZrI4 (s) ↔ Zr (s) + 2I2 (g)
3. NH3 (g) + HCl (g) ↔ NH4Cl (s)
Answer:
1. Kc = [NO]⁴ [H₂O]⁶ / [NH₃]⁴ [O₂]⁵
2. Kc = [I₂]²
3. Kc = 1/[NH₃] [HCl]
Explanation:
The equilibrium constant (Kc) is equal to the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactant raised to their stoichiometric coefficients. It only includes gases and aqueous species.
1. 4 NH₃(g) + 5 O₂(g) ↔ 4 NO(g) + 6 H₂O(g)
Kc = [NO]⁴ [H₂O]⁶ / [NH₃]⁴ [O₂]⁵
2. ZrI₄(s) ↔ Zr(s) + 2 I₂(g)
Kc = [I₂]²
3. NH₃(g) + HCl(g) ↔ NH₄Cl(s)
Kc = 1/[NH₃] [HCl]
Given the following equation: 3C12 (g) + 8NH3 (g) → N2(g) +
ONH4Cl (S)
How many moles of NH3 are required to produce 12 moles of
NH4Cl?
Answer:
The balanced equation will be your greatest asset in Solving this.
The Balanced Equation is
3Cl2 + 8NH3---> N2 + 6NH4Cl
So
From this reaction...
3 moles of NH3 is required to produce 6 moles of NH4Cl
Now the question asked.... How Many Moles of NH3 will be needed to produce 12moles of NH4Cl?...
The answer is simply 6moles of NH3.
Why?
Since 3moles of NH3 produce 6 moles of NH4Cl
It makes sense that
6moles of NH3 will produce 12moles of NH4Cl.
Its a simple Ratio.
Hope this helps...
I'm Open to questions if you have any.
Have a great Day!
Under the right conditions aluminum will react with chlorine to produce aluminum chloride.
2 Al + 3 Cl2 - 2 AlCl3
How many grams of aluminum are needed to react completely with 11.727 liters of chlorine?
Answer:
[tex]m_{Al}=9.42gAl[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction:
2 Al + 3 Cl2 --> 2 AlCl3
Whereas there is a 2:3 mole ratio of aluminum to chlorine; it will be possible for us to calculate the required grams of aluminum by using the equality 22.4 L = 1 mol, the aforementioned mole ratio and the atomic mass of aluminum (27.0 g/mol) to obtain:
[tex]m_{Al}=11.727LCl_2*\frac{1molCl_2}{22.4LCl_2}*\frac{2molAl}{3molCl_2} *\frac{27.0gAl}{1molAl} \\\\m_{Al}=9.42gAl[/tex]
Regards!
Zirconium has an atomic number of 40, And an atomic mass of 91. How many electrons does zirconium have?
A. 91
B. 51
C. 40
D. 131
Answer:
40
Explanation:
because the atomic number is how many electrons
C. Balance these fossil-fuel combustion reactions. (1 point)
The question is incomplete. The complete question is :
C. Balance these fossil-fuel combustion reactions. (1 point)
C8H18(g) + 12.5O2(g) → ____CO2(g) + 9H2O(g) + heat
CH4(g) + ____O2(g) → ____CO2(g) + ____H2O(g) + heat
C3H8(g) + ____O2(g) → ____CO2(g) + ____H2O(g) + heat
C6H6(g) + ____O2(g) → ____CO2(g) + ____H2O(g) + heat
Solution :
C8H18(g) + 12.5O2(g) → __8__CO2(g) + 9H2O(g) + heat
When 1 part of octane reacts with 12.5 parts of oxygen, it gives 8 parts of carbon dioxide and 9 parts of water along with liberation of energy.
CH4(g) + __2__O2(g) → __1__CO2(g) + __2__H2O(g) + heat
When 1 part of methane reacts with 2 parts of oxygen, it gives 1 part of carbon dioxide and 2 parts of water along with liberation of energy.
C3H8(g) + __5__O2(g) → __3__CO2(g) + __4__H2O(g) + heat
When 1 part of propane reacts with 5 parts of oxygen, it gives 3 part of carbon dioxide and 4 parts of water along with liberation of energy.
C6H6(g) + __1/2__O2(g) → __6__CO2(g) + __3__H2O(g) + heat
When 1 part of propane reacts with 1/2 parts of oxygen, it gives 6 part of carbon dioxide and 3 parts of water along with liberation of energy.
Balance the following equation by LCM method.Mg + H2O = Mg(OH)2 + H2
Answer:
Mg + 2H₂O —> Mg(OH)₂ + H₂
Explanation:
Mg + H₂O —> Mg(OH)₂ + H₂
The above equation can be balance as illustrated below:
Mg + H₂O —> Mg(OH)₂ + H₂
There are 2 atoms of H on the left side and a total of 4 atoms on the right side. It can be balance by writing 2 before H₂O as shown below:
Mg + 2H₂O —> Mg(OH)₂ + H₂
Now, the equation is balanced
****Check***
Element >>>>> Reactant >>>> Product
Mg >>>>>>>>>> 1 >>>>>>>>>>> 1
H >>>>>>>>>>> 4 >>>>>>>>>>> 4
O >>>>>>>>>>> 2 >>>>>>>>>>> 2
The balanced equation of Mg + H2O = Mg(OH)2 + H2 is given as
Mg + 2H₂O —> Mg(OH)₂ + H₂
What is the balance equation?Generally, the equation for the Chemical equation is mathematically given as
Mg + H₂O —> Mg(OH)₂ + H₂
Therefore, We se that we have on the LHS
Mg=1
H=2
O=1
and on The RHS
Mg=1
H=4
O=2
Therefore to balance, we add 2 to H and 1 to O giving
Mg + 2H₂O —> Mg(OH)₂ + H₂
Read more on Chemical equation
https://brainly.com/question/11231920
Equal masses of gaseous N2 and Ar are placed in separate flasks of equal volume at the same temperature. Tell whether each of the following statements is true or false. a. There are more molecules of N2 present than atoms of Ar. Blank 1 b. The pressure is greater in the Ar flask. Blank 2 c. The N2 molecules collide more frequently with the walls of the flask than do the Ar atoms.
Answer:
c. The N2 molecules collide more frequently with the walls of the flask than do the Ar atoms.
Explanation:
The statements are:
a. There are more molecules of N2 present than atoms of Ar. FALSE. Because 1 mol of molecules of N2 = 28g and 1 mol of molecules of Ar = 40g. As there are equal MASSES, you will have more molecules of N2 than Ar molecules
b. The pressure is greater in the Ar flask. FALSE
Because pressure is directly proportional to amount of molecules. As molecules N2 > Molecules Ar. The pressure is greater in N2 flask
c. The N2 molecules collide more frequently with the walls of the flask than do the Ar atoms. TRUE
The collision probability of N2 is higher because there are more molecules presents
1. Phosphorous reacts with bromine to form phosphorous tribromide. If 35.0 grams of bromine
reacted and 27.9 grams of phosphorous tribromide are actually formed.
what is the percent yield of phosphorous tribromide (PBr3)?
2 P + 3 Br2 ---> 2 PBr3
(Note that the molar masses: P=30.97g, Br = 79.90g) Show your steps
*
Please help me
Answer:
70.6 %
Explanation:
First step, we define the reaction:
2P + 3Br₂ → 2PBr₃
We determine the moles of reactant:
35 g . 1mol / 159.8 g = 0.219 moles
We assume, the P is in excess, so the bromine is the limiting reagent.
3 moles of Br₂ can produce 2 moles of phophorous tribromide
Then, 0.219 moles may produce (0.219 . 2) /3 = 0.146 moles of PBr₃
We convert moles to mass:
0.146 mol . 270.67 g /mol = 39.5 g
That's the 100 % yield reaction, also called theoretical yield. The way to determine the % yield is:
(Yield produced / Thoeretical yield) . 100
(27.9 / 39.5) . 100 = 70.6 %
how will you know whether the crystallization point is reached
Answer:
Place a glass rod in the solution, if the crystallisation point has been reached, you should notice small crystals formed on it.
What does the number 7 mean in the following example-73Li?
a. The number of protons
b. The atomic mass
c. The atomic number
d. The number of electrons
Answer:
7 is the mass number of li and 3 is the atomic number
a 3
b 7
c 3
d 4
What is the name of the molecule formed when two amino acids join
together?
O A. Peptide
B. Nucleic acid
C. Amine
O D. Disaccharide
Peptide is the name of the molecule formed when two amino acids join together. Therefore, the correct option is option A.
What is peptide?
Short strands of amino acids connected by peptide bonds are called peptidides. A polypeptide is a peptide chain that is longer, continuous, and unbranched. Proteins are polypeptides with a molecular weight of 10,000 Dalton or higher. Oligopeptides, which comprise dipeptides, tripeptides, and tetrapeptides, are chains of fewer than twenty amino acids.
Peptides, along with nucleic acids, oligosaccharides, carbohydrates, and others, belong to the vast chemical families of biological polymers or oligomers. Proteins are made up of one or even more polypeptides structured in a biologically useful manner. They are frequently coupled to other proteins, other macromolecules like DNA or RNA, or ligands like coenzymes and cofactors. Peptide is the name of the molecule formed when two amino acids join together.
Therefore, the correct option is option A.
To know more about peptide, here:
https://brainly.com/question/14351838
#SPJ7
does the nitro group on the pyridine ring make the ring more electron rich or more electron deficient
Answer:
more electron deficient
Explanation:
The nitro group is an electron withdrawing group. It withdraws electrons from the pyridine ring by resonance.
This electron withdrawal by resonance makes the pyridine ring less electron rich or more electron deficient.
Hence, the nitro group makes the pyrinde ring more electron deficient
Calculate the pH when (a) 24.9 mL and (b) 25.1 mL of 0.100 M HNO3 have been added to 25.0 mL of 0.100 M KOH solution.
Answer:
Suppose you added some solid NaCl to a saturated solution of NaCl at 20℃ and warmed the mixture to 40℃. What would happen to the added NaCl?
Explanation:
can you help with this one
The base area of a pyramid is 1,225m2.if the pyramid is 11.3m high,what is it's volume
Answer:
Volume = 4614 m³
Explanation:
The volume of a pyramide is given by the following formula:
Volume = 1/3 * base area * heightWe are already given all the required information to calculate the volume by inputting the data:
Volume = 1/3 * 1225 m² * 11.3 mVolume = 4614 m³The pyramid's volume is 4614 cubic meters.
Calculate the percent composition by mass of iron in Fe(NO3)3
Answer:
It's 23.14 percent
Explanation:
First, the mass of all the elements are:
N = 14
O = 16
Fe = 56
In this molecule you have 3 atoms of N, and 9 atoms of O, so:
3•14 = 42
16•9 = 144
The whole mass of the molecule is:
56 + 42 + 144 = 242
242/100 = 2.42, so 1% is 2.42
56/2.42 = 23.14%
Which one of the following is an example of a difficulty caused by thermal
expansion?
A. milkshakes melting
B. paint chipping off the side of a house
C. buckled railroad tracks on a hot day
D. sagging power lines on a cold day
Answer:buckled railroad tracks on a hot day
Explanation: i just did it
Im stuck on these two questions anyone have the right answer?
What type of decay changes the atomic number of the atom?
B. Translocation
C. Translation
D. Transuranium
A. Transmutation
Answer:
d
Explanation:did test
What happens to the speed of motion of the particles of a gas when a certain volume of the gas is heated at constant pressure? Explain your answer.
Answer:
The particles begin to move faster as the gas is heated. Since the gas remains at a constant pressure and volume, the particles are not able to spread out, so they move around the container even faster.
Explanation:
its just what happens
When a. certain volume of gas is heated at constant pressure, the speed of motion of the gas increases with temperature increase.
Amontons’s law.Anontons law states that If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. If the volume is held constant, the increased speed of the gas molecules results in more frequent and more forceful collisions with the walls of the container, therefore increasing the pressure.
Read more on Kinetic Molecular Theory:
https://brainly.com/question/2901837
#SPJ2
What is the perfect composition of calcium in calcium chloride?
Answer: 63.96%.
Explanation:
In 111g of Calcium chloride, there is 40g of Calcium and 71g of Chlorine. Percentage Composition of Chlorine is 63.96%.
Hope This Helps!
What is the answers?
Is my answer right?
Answer:
I say the correct answers are primary and secondary and teriary.
Explanation:
I say you are right!!
Consider the equation A(aq) 2B(aq) 3C(aq) 2D(aq). In one experiment, 45.0 mL of 0.050 M A is mixed with 25.0 mL 0.100 M B. At equilibrium the concentration of C is 0.0410 M. Calculate K. g
Answer:
K = 0.0396
Explanation:
Based on the reaction:
A + 2B ⇄ 3C + 2D
Where equilibrium constant, K, is:
K = [C]³[D]² / [A] [B]²
The initial concentrations of A and B are:
[A]₀ = 0.050M * (45.0mL / 70.0mL) = 0.0321M
[B]₀ = 0.100M * (25.0mL / 70.0mL) = 0.0357M
As [C] = 0.0410M, the molar concentration of D is:
0.0410M * (2mol D / 3mol C) = 0.0273M = [D]
And the concentration of A and B that reacted was:
0.0410M * (2mol B / 3mol C) = 0.0273M B
0.0410M * (1mol A / 3mol C) = 0.0137M A
Equilibrium concentration B and A:
0.0357M - 0.0273M = 0.0084M = [B]
0.0321M - 0.0137M = 0.0184M = [A]
And K is:
K = [0.0410M]³[0.0273M]² / [0.0184M] [0.0084M]²
K = 0.0396a. acidic
b. basic
; neutral
d. will not be affected
Find the molarity of 10% NaOH.[MOE 2003
a. 1.5
b! 2.5
c. 4
d. 0.4
10 ml of 2.5 N NaOH is mixed with 20 ml of
N HCI. The mixture is diluted to 100 ml. WI
is the nature of mixture?
IMOF 20
1. You didn't post the question to Number 1.
2.
10% means There's 10g in 100ml of this solution.
This is the weight/volume(w/v) expression of concentration.
So
We have Mass =10g
volume =100ml
Molarity = Moles of solute/volume of solution(in LITRES)
Moles=Mass/Molar mass
Molar mass of NaOH=40g/mol
Mole=10/40
=0.25mole
Volume =100ml =0.1Litres
MOLARITY=0.25/0.1 =
=2.5M
OPTION B.
3. NOTE: THE MOLARITY AND NORMALITY OF NAOH AND HCL ARE THE SAME(This doesn't happen for all compounds tho)
So We can take 2.5N(Normality) of NaOH to be 2.5M(Molarity) NaOH
I think you forgot to write the Normality of the second one. I'll take it to be 1N. Maybe you can then Input supposed value when you're solving on your own
So
1N HCl is same as 1M HCL
We were given their respective volumes
2.5M NaOH can also be written as 2.5mole/volume(in Liters)
The volume of NaOH =10ml or 0.01L
Moles = 2.5mole/L x 0.01L
You notice that Liters on top and bottom cancels out... leaving the moles
So
Mole=0.01x2.5 = 0.025moles of NaOH
we're gonna do the same for 1N HCl in 20ml(0.02L)
So
Mole = 1 x 0.02 =0.02moles
Total Mole = 0.02 + 0.025 =0.045moles
The Final Volume is 100ml as stated in the question. It was diluted to 100ml or 0.1L
So
Final Concentration In Molarity
= Total Moles/Volume in L
=0.045/0.1
=0.45M.