For any particular electron donor the most free energy will be released when molecular oxygen serves as the electron acceptor because molecular oxygen is a stronger electron acceptor then most other available electron acceptors.
Oxygen is a highly electronegative due to its size. Its high electronegativity increases the electron affinity of oxygen to a very large extent.
At the end of the electron transport chain, most of the electron loses their energy when molecular oxygen serves as the electron acceptor.
Because at the end of the electron transport chain, water can easily form hydronium ion by combining readily with Hydrogen (H+).
To know more about Electron Acceptor, visit,
https://brainly.com/question/840722
#SPJ9
The number of ______________________ can be used to identify an element.
What rule can you state about the relationship between phase changes and heat energy?
The terms change of phase and change of state are synonymous. A change in phase is always accompanied by a change in heat. However, the temperature remains constant. When we heat a solid, the energy supplied is used to increase the kinetic energy of its molecules, resulting in an increase in temperature.
What happens to energy when the phases change?A system undergoing a phase change absorbs or releases energy. Energy changes are equal in magnitude but opposite in sign for systems undergoing complementary phase changes. The heat energy added during the phase change overcomes some of the forces that hold the molecules together, allowing them to move further apart. The added heat energy is stored as potential energy, or energy of position, during the phase change because the molecules are now further apart. A change in phase is always accompanied by a change in heat. However, the temperature remains constant. When we heat a solid, the energy supplied is used to increase the kinetic energy of its molecules, resulting in an increase in temperature.To learn more about phase changes, refer to:
https://brainly.com/question/25664350
#SPJ4
The density of silver is 10.5 g/cm3. What mass of silver would occupy a volume of 56.0 cm3?
Answer:
28 g
Explanation:
d = m/V
m = dV = 10.5 x 56.0 = 28 g
Is milk going sour caused by heating
Answer:
Both are chemical changes and both are physical changes.
Explanation:
Milk can go sour in the fridge and I don't really know about the conserve mass one.
You have 7 moles of H2O. How many particles are present?(Avogadro's Number is 6 x 10^23) a 4.2 x 10^23 b 4.2 x 10^24 c 4.2 d 42
Answer
b. 4.2 x 10²⁴
Explanation
Given:
Moles of H2O = 7 moles
Avogadro's Number is 6 x 10²³
What to find:
The number of articeles of H2O present in 7 moles of H2O.
Solution:
1 mole f any substanc contains 6 x 10²³ partcicles
Therefore 7 moles of H2O will contain
[tex]\frac{7\text{ }moles}{1\text{ }mole}\times6\times10^{23}\text{ }particles=4.2\times10^{24}\text{ }particles[/tex]The correct answer is option:
b. 4.2 x 10²⁴
Question 19
How many hydrogen ions (protons; H-) would need to bond with the carbonate anion to create carbonic acid?
A. 1
B. 2
C. 3
D. 4
2 hydrogen ions (protons; H-) would need to bond with the carbonate anion to create carbonic acid.
In what bonds does carbonic acid consist?One carbon-oxygen double bond and two carbon-oxygen single bonds make up the structure of carbonic acid, as can be seen from the example given above. One hydrogen atom is joined to each of the oxygen atoms involved in a single bond with the carbon.
Do hydrogen bonds exist in carbonic acid?In the dimers of carbonic acid, bifurcated hydrogen bonds frequently occur, creating a complicated picture with several orbital interactions of different intensities. The lowest energy dimers are made up of two anti-anti monomers interacting through the strongest C=OH-O hydrogen bonds.
To know more about double bond :
https://brainly.com/question/16626126
#SPJ9
determine the average value of the translational kinetic energy of the molecules of an ideal gas at (a) 0.00 oc and (b) 100 oc. what is the translational kinetic energy per mole of an ideal gas at (c) 0.00 oc and (d) 100 oc?
If the volume of the gas is increased to 9.90 l (at constant temperature), then its pressure will be 373 mmg.
According to Boyle's law, if the temperature of a gas is constant then the volume and pressure of the gas can be in relation to each other at different times.
We are given:
The initial volume of the gas V1 = 4.90 L
The initial pressure P1 = 755 mmg
The final volume of the gas V2 = 9.90 L
The final pressure of the gas P2 = ?
Using Boyle's law equation we can find the final pressure.
The equation is
P1V1 = P2V2
P2 = P1V1/V2
P2 = 755 x 4.90 / 9.90
P2 = 373 mmg
Thus, the final pressure is 373 mmg. Hence we can conclude that as the pressure decreases then volume of gas increases.
If you need to learn more about pressure click here:
https://brainly.com/question/28012687
#SPJ4
Can someone help me with level 17 of Covalent Bonds o the Collision app? This is the last one and it's urgent.
The covalent compounds formed from the given elements are as follows:
Water; H₂OCarbo (iv) oxide; CO₂, and Nitrogen trifluoride; NF₃What are covalent compounds?Covalent compounds are compounds that are formed as a result of covalent bonds formed between atoms of different elements.
Covalent bonds are formed as a result of sharing of electrons between atoms of different elements usually non-metals.
Due to differences between the electronegativities of atoms of nom-metals, the electrons shared in covalent compounds are not always shared equally. Thus, several other intermolecular forces exist between molecules of covalent compounds.
Some of the intermolecular forces that exist in covalent compounds include:
London Dispersion forcesDipole Dipole forcesHydrogen bondingGiven the following elements: nitrogen, fluorine, oxygen, carbon, and hydrogen.
The covalent compounds that can be formed representing the given intermolecular forces are as follows:
Water; H₂O - hydrogen bonding exists between water moleculesCarbo (iv) oxide; CO₂ - London dispersion forces are the major intermolecular forces present in carbo (iv) oxide given moleculesNitrogen trifluoride; NF₃ - dipole dipole forces predominate in nitrogen trifluoride molecules.
Learn more about covalent compounds at: https://brainly.com/question/3447218
#SPJ1
How many moles of nitrate ions are there in 8.92 mol Ba(NO3)2?
Answer:
1 mole of Barium Nitrate has One mole of Barium ions, two moles of Nitrate ions
Marcie fills a graduated cylinder with 15.0 mL of water (Vi). Paul finds the mass of a marble to be 2.21g, then drops the marble into the graduated cylinder. If the meniscus on the graduated cylinder is now at 16.3 mL (Vf), what is the density of the marble?
The density of the marble is 1.7kg/m³
Density is the amount of mass per unit of volume
Marcie fills a graduated cylinder with 15.0 mL of water (Vi) paul finds the mass of a marble to be 2.21g, then drops the marble into the graduated cylinder if the meniscus on the graduated cylinder is now at 16.3 mL (Vf)
We have to find density of the marble = ?
Volume = (Vi) - (Vf) = 15.0 mL - 16.3 mL
Volume = 1.3mL
Mass = 2.21g
Density = mass/volume means ρ = m/V
Density = 2.21g / 1.3mL
Density = 1.7kg/m³
The density of the marble is 1.7kg/m³
Know more about density
https://brainly.com/question/17970912
#SPJ1
A gas has a volume of 6 L when its temperature is 300 K. What will the gas's new volume be if the temperature is reduced to 200 K?
The volume of fuel is 6 liters and the temperature is about 300 degrees. Gasoline laws relate to volume, strain, temperature, and amount of fuel. New fuel volume when the temperature drops to 200 ok: the old way to fine-tune gasoline. 273 ok (0°C) and pressure 1.00 atm.
Temperature is a measure of hot or cold expressed in many scales, including Fahrenheit and Celsius. Temperature indicates the route wherein heat energy will spontaneously waft—i.e., from a hotter body (one at a better temperature) to a colder frame (one at a decreased temperature). warmness is the overall energy of the motion of the molecules of a substance, while temperature refers back to the measure of the average energy of the motions of the molecules inside the substance.
Temperature is just a size that shows the average kinetic strength of one atom or molecule. hence, whilst we say something is hot or bloodless, we're normally using some other reference factor to outline the hotness and coldness of a frame. A thermometer is a tool that measures temperature. it can measure the temperature of a stable along with food, a liquid inclusive of water, or fuel along with air.
Learn more about Temperature here:
https://brainly.com/question/24746268
#SPJ1
The mass number of a fluorine atom with 4 neutrons is ________________.
Group of answer choices
5
23
13
9
Answer:
9
Explanation:
The mass will only be 9 if there are 4 neutrons, hope this helps
the chemical formula for an ionic compound represents the group of answer choices number of ions in each molecule. total number of ions in the crystal lattice. number of atoms in each molecule. ratio of the combined ions present in a sample.
The chemical formula for an ionic compound represents the ratio of the combined ions present in a sample.
A sample of an ionic compound doesn't represent a multiple of distinct molecules, like a sample of a covalent compound, where the chemical formula does represent the number of atoms in a single, differentiated molecule. Ionic compounds form crystal lattices where each positively charged cation is surrounded by negatively charged anions and vice versa. Thus, the chemical formula of an ionic compound merely describes the ratio of cations and anions present in the crystal lattice.
The total number of ions in the lattice can, on the other hand, be calculated using the mass of the sample and Avogadro's number.
You can learn more about ionic compounds here:
brainly.com/question/9167977
#SPJ4
HELP WILL GIVE BRAINLIST
A student measures the density of a piece of plastic to be 0.90 g/ml. However, the accepted value for the density of that type of plastic is 1.1 g/ml. What is the percent error in her measurements?
Answer: The density of a substances is generally known as mass per unit volume. And The SI unit is Kg/m3. Mass Versus Weight: Always there is confusion in people between mass and weight. Actually, the mass of an object is referred to its weight. In the scientific concepts mass refers loosely to the amount of matter in an object.
Explanation:
FeSO4(aq) + K3PO4 (aq) —>
K2CO3 (aq) + CdI2 (aq) —>
CaCo3 (aq) + HNO3 (aq) —>
An ionic equation is a chemical equation in which the electrolytes in aqueous solution are described as dissociated ions.
What is the difference between ionic equation and net ionic equation?A complete ionic equation also contains the spectator ions, whereas a net ionic equation just displays the chemical species that are involved in a reaction.A molecular formula has two or more atoms bonded together, whereas a chemical formula can only refer to one atom. They are both elements, and their chemical symbols are unchanged.An ionic equation is a chemical equation in which the electrolytes in aqueous solution are described as dissociated ions. It is similar to a molecular equation in that it expresses compounds as molecules.3FeSO4(aq) + 2K3PO4(aq) = Fe3(PO4)2(s) + 3K2SO4(aq)
ionic equation : 3Fe(2+)(aq) + 3SO4(2-)(aq)+ 6Na(+)(aq) + 2PO4 (3-) (aq) → Fe3(PO4)2(s)+ 6Na(+) + 3SO4(2-)(aq)
net ionic equation: 3Fe(2+)(aq) + 2PO4 (3-)(aq) → Fe3(PO4)2(s)
K2CO3(aq) + CdI2(aq) = 2KI(aq) + CdCO3(s)
net ionic equation for K2CO3(aq) + CdI2(aq) = 2KI(aq) + CdCO3(s).
2HNO3 + CaCO3 = Ca(NO3)2 + H2O + CO2
ionic equation : CaCO3(s) + 2H+(aq) → Ca2+(aq) + CO2(g) + H2O()
To learn more about : Ionic equation
Ref : https://brainly.com/question/19705645
#SPJ13
write a balanced chemical equation based on the following description: propanol, c₃h₇oh(l) burns in air to produce gaseous carbon dioxide and water vapor
The balanced chemical equation of combustion of propanol is 2 C₃H₇OH +9 O₂[tex]\rightarrow[/tex] 6 CO₂ +8 H₂O.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/19626681
#SPJ1
How many moles of cobalt atoms are in 29.4 grams of cobalt?
0.4988699069454786 Moles of cobalt atoms are in 29.4 grams of cobalt.
How to convert grams of cobalt into moles of cobalt ?In order to convert grams of cobalt into moles of cobalt :
n = m / M,
n - number of moles.
m in grams - specific mass.
M is the molar mass of this material.
n = 29.4 g / 58.933200 g/mol
n = 0.4988699069454786 moles
A mole is defined as 6.0221076 × [tex]10^{23}[/tex] of any chemical unit, be it atoms, molecules, ions or others. A mole is a convenient unit to use because any substance has a large number of atoms, molecules or otherwise.
To learn more about moles of cobalt , visit;
https://brainly.com/question/25506615
#SPJ13
Ostriches are mostly active during the day, so they should be classified as__________.
A)
crepuscular
B)
perennial
C)
diurnal
D)
nocturnal
E)
biurnal
Answer:
C
Explanation:
ostriches are classified as diurnal
Answer: The answer is diurnal!
Explanation: Nocturnal animals, such as the owl or bat, stay awake during the night and sleep during the day! Which for diurnal animals, they sleep during the night, and roam around during the day! Such as us humans are both because some people may work during the night and sleep during the day! The most common for humans is us sleeping at night though and awake during the day!
which of the following is a derived unit (a) kg ( b) meter ( c) kelvin ( d ) newton
Among the given options, the derived unit is Newton. Option d is correct.
Derived units are measure units that have been derived from more than one base unit. Also understood as the units derived from the fundamental units. They either lack dimension or are the products of base units, like derived unit of force is Newton. A total of 22 derived units exist. The basic 7 derived units are Length is meter(m), Mass is kg (kilogram) ,Time is s (second), Electric Current is A (Ampere) ,Thermodynamic Temperature is K (degrees Kelvin) ,Amount of Substance is mol (mole) and Luminous Intensity is cd (candela)
Learn more about Derived units here https://brainly.com/question/4950932
if 100 mg of ferrocene is reacted with 75 mg of anhydrous aluminum chloride and 40 microliters of acetyl chloride and 100 mg of product is isolated, what is the percent yield assuming the product is only mono acetylferrocene? answer with just the number and no % sign.
Fe(C 5H 5) 2 describes the organometallic compound ferrocene. The molecule is a complex made up of a core iron atom and two cyclopentadienyl rings.
AlCl3 is the chemical formula for aluminum chloride, sometimes referred to as aluminum trichloride.
Acetic acid is the source of the acyl chloride known as acetyl chloride. AcCl is a frequent way to shorten its formula.
"81.3%"
One mole of ferrocene combines with one mole of acetyl chloride in accordance with the reaction's stoichiometry to produce one mole of mono acetylferrocene.
The limiting reagent is the one that is minimally present. Ferrocene is the limiting agent as a result.
The limiting reagent controls how the product is formed. So,
In a reaction, one mole of ferrocene yields one mole of mono acetylferrocene.
reaction forms with 0.0005375 moles of ferrocene Mono acetylferrocene, 0.0005375 mole
0.0005375 moles of product were produced.
Mono acetylferrocene's molar mass is 228.07 g/mole.
Produced mono acetylferrocene mass equals moles times molecular weight, or 0.0005375 x 228.07 g, or 0.123 grammes, or 123 mg.
assuming a 100 mg experimental yield
% yield is equal to (Experimental Yield / Theoretical Yield) / 100, which equals (100/ 123) / 100, or 81.3%.
To know more about mono acetylferrocene, click on the link below:
https://brainly.com/question/14211561
#SPJ9
How many mols of sodium are present in 6.7 grams of sodium?
The answer is 22.98977. We assume you are converting between grams Na and mole.
During the determination of molar mass of co2 experiment, suppose you measure the atmospheric pressure of the lab as 752 torr and the temperature of the lab as 21°c. If the vapor pressure of water is 18. 65 torr at 21°c, what is the pressure, in atm, of the co2 collected?.
The pressure of the CO₂ collected in atm is 0.965 atm.
We need to know about pressure to solve this problem. Pressure is unit that describe how much force applied on a surface area. It can be determined as
P = F / A
where P is pressure, F is force and A is area.
From the question above, we know that
Pvapor = 18.65 torr
P = 752 torr
From partial pressure, we can conclude that
P = Pco₂ + P vapor
752 = Pco₂ + 18.65
Pco₂ = 752 - 18.65
Pco₂ = 733.35 torr
Convert to atm
Pco₂ = 733.35 torr
Pco₂ = 733.35/760 atm
Pco₂ = 0.965 atm
Find more on pressure at: https://brainly.com/question/25965960
#SPJ4
(ii) In this lattice, the ratio of positive ions to negative ions is 1:1
In the lattice of a different ionic compound, the ratio of positive ions to
negative ions is 1:2.
Suggest why this ratio varies in different ionic compounds.
The ratio varies in different ionic compounds because different ionic compounds have different ratios of positive ions to negative ions.
How do lattices function?An ordered grid of points known as a lattice is used to visualize how crystallizing particles are structured. The unit cell of the crystal is defined by the lattice points. The smallest part of a crystal, known as a unit cell, is repeatedly translated in three dimensions to create the whole crystal.
The crystal structure (or crystal lattice) of an ionic compound is determined by the size of the ions and the stoichiometry (ratio of cations to anions) of the ions. Many ionic compounds have variations in this ratio.
A recurring three-dimensional pattern of atoms or groups of atoms in a crystal is known as a crystal lattice structure.
To learn more about lattice click on the link below:
https://brainly.com/question/4792664
#SPJ9
4. List the basic tenants of the Kinetic Molecular Theory.
Answer:
The five main postulates of the KMT are as follows: (1) the particles in a gas are in constant, random motion, (2) the combined volume of the particles is negligible, (3) the particles exert no forces on one another, (4) any collisions between the particles are completely elastic, and (5) the average kinetic energy of ...
Explanation:
A 1.0 m solution of HC1 in benzene has a freezing point of 0.4 °C. Is HC1 an electrolyte in benzene? Explain.
Based on the freezing point depression value of HCl in benzene, HCl does not act as an electrolyte in benzene.
What is the effect of solute on the freezing point of a solvent?The freezing point of a solvent such as water is lowered by the solute which ionizes in it.
The freezing point of a solution depends on the number of particles in the solution.
The formula for freezing point depression is given below:
ΔTf = i * Kf * m
HCl remains as molecules and does not ionize in a solution of Benzene. This is because benzene is a nonpolar solvent.
Therefore, the equation for the dissolution of HCl in benzene is given below:
HCl (g) → HCl (in benzene solution)
1 mol of HCl gas gives 1 mol of HCl molecules in solution.
Therefore, HCl remains a molecule and does not act as an electrolyte in benzene.
Learn more about freezing point depression at: https://brainly.com/question/24314907
#SPJ1
Using the fictional periodic tale which of the following is the correct molar mass of H₂SO4
A
B
C
D
45.77 g
82.98 g
115.58 g
180.78 g
The mass of 6.022*10*23 atoms, molecules, or formula units make up one mole of a substance, which is known as the molar mass. This value is given in grams per mole.
The mass of a sample of a chemical compound divided by the quantity, or number of moles in the sample, measured in moles, is known as the molar mass of that compound. A substance's molar mass is a bulk characteristic rather than a molecular one.
Units: g/mol. Determine the atomic masses of each atom.Count the number of those atoms that are in the formula:The sum of all atomic masses. (Note: You must multiply it by the quantity of each atom in the formula if there are multiples of that atom.)Atomic masses:
Hydrogen - 1.01Sulphur - 32.06Oxygen - 16Number of atoms:
S - 1; O - 4; H - 2;
Molar mass = 32.06 + (1.01 * 2) + (16 * 4)
= 98.08 g/mol
To know more about molar mass, click on the link below:
https://brainly.com/question/837939
#SPJ9
Explain covalent bond?
please explain why and reason
Answer:
I think the right answer was "because they have already formed bonds to become more stable"
Explanation:
the reason you got the question wrong was because not all unstable elements have to be bonded with a gas molecule. It could be a metal for example.
it's hard to find these unstable elements in natural nature because since they are so unstable, they can't "wait" so they form bonds as soon as they can when they get the chance.
nature isn't controlled by scientists too, so these unstable elements form bonds with almost anything possible when they have the chance to become more stable
Answer the following questions using the information from these videos. Be sure to use complete sentences.
1) What are the suspects accused of doing?
2) Describe how the suspects used the zinc metal and the zinc chloride solution to change the copper coins to silver.
(Hint: Additive or Displacement plating?)
3) How did the suspects make the silver coins look gold?
Based on the electroplating process video:
The suspects were accused of producing fake gold coins.The suspects used the zinc metal and the zinc chloride solution to change the copper coins to silver by additive plating.The suspects made the silver coins look gold by holding it over a roaring bunsen flame.What is electroplating?Electroplating is the process by which a metal is used to coat the surface of another substance.
The process of electroplating is done in order to improve the quality of the material being coated as well as to make it more durable.
In the video, the copper coins were plated with zinc by dipping the coins into a solution of sodium zincate.
The sodium zincate is prepared by dissolving powdered zinc in a sodium hydroxide solution.
The undissolved zinc powder in the solution will form a fine film of zinc over the copper making it looks shiny like zinc.
The zinc-coated coin is then held over a bunsen flame until it turns shiny gold.
Learn more about electroplating at: https://brainly.com/question/3913850
#SPJ1
a chemical ____ is a process in which some substances change chemically into different substances
Answer:
Explanation:
a chemical reaction is a process in which the some substances go into reactant and some into products , the reactant molecule produce the new molecules in the form of product, it's also called the breaking of chemical bonds and forming the new bonds .