A cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. The entropy of the gas is 1.18 J/K and the change in the entropy of the environment is -1.18 J/K.
A cylindrical weight with a mass (m) of 3 kg is dropped, that is, its initial velocity (u) is 0 m/s and travels 10 m (s). Assuming the acceleration (a) is that of gravity (9.8 m/s²). We can calculate the velocity (v) of the weight in the instant prior to the collision with the piston using the following kinematic equation.
[tex]v^{2} = u^{2} + 2as = 2 (9.8 m/s^{2} ) (10m) \\\\v = 14 m/s[/tex]
The object with a mass of 3 kg collides with the piston at 14 m/s, The kinetic energy (K) of the object at that moment is:
[tex]K = \frac{1}{2} m v^{2} = \frac{1}{2} (3kg) (14m/s)^{2} = 294 J[/tex]
The kinetic energy of the weight is completely converted into heat transferred into the gas cylinder. Thus, Q = 294 J.
Given all the process is at 250 K (T), we can calculate the change of entropy of the gas using the following expression.
[tex]\Delta S_{gas} = \frac{Q}{T} = \frac{294 J}{250K} = 1.18 J/K[/tex]
The change in the entropy of the environment, has the same value but opposite sign than the change in the entropy of the gas. Thus, [tex]\Delta S_{env} = -1.18 J/K[/tex]
A cylindrical weight with a mass of 3 kg is dropped onto the piston from a height of 10 m. The entropy of the gas is 1.18 J/K and the change in the entropy of the environment is -1.18 J/K.
Learn more: https://brainly.com/question/22655760
In experiment 9, in one operation, we heat up the alcohol with acid and do a concurrent distillation. What was the purpose of doing this
Answer:
we heat up because the component with lower boiling evaporates first,
leaving the other behind
Which spheres include the water cycle? (Select all that apply.)
biosphere
geosphere
hydrosphere
atmosphere
Answer:
A, B, C, D
Explanation:
The water cycle is included in the atmosphere (water vapor in the air), the geosphere (water collection), the hydrosphere (water on earth: lakes, oceans, rivers), and the biosphere (where water interacts with all living things).
In an ecosystem, the water cycle is included in all the spheres that is biosphere,geosphere,hydrosphere and atmosphere.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ2
What will happen to the temperature of an object if the kinetic energy of the particles increases?
The temperature of an object will increase if the kinetic energy of the particle increases.
Kinetic energy is an energy that is said to be in motion. According to the kinetic molecular theory of ideal gas, the particles of the gas are usually moving in constant random motion and they exert no force on each other.
Also, the temperature varies directly proportional to the average kinetic energy of the gas particles. As a result, when the kinetic energy of the particles increases, the temperature will also increase.
Learn more about the kinetic theory of gas here:
https://brainly.com/question/9949658?referrer=searchResults
The table below shows the dimensions of two colored cubes.
Dimensions of Cubes
Cube Side (cm) Mass
(g)
Yellow 3 135
Black 2 48
Answer: The correct answer is black because the product of its side and mass is lower.
Explanation: The density of a substance is defined as the amount of matter that can be stored in a given volume.
Hence, the black cube will be denser because the product of its side and mass is lower.
Answer: it was wrong on my test
Explanation:
literally dont believe them
PLS HELP THIS IS TO HARD PLS
Select the container from the figure (Figure 1) that represents the dilution of a 4 % (m/v) KCl solution to each of the following: Figure1 of 1 There is a diagram showing several containers. One container is filled with 4 percent of mass to volume solution of NaCl. Container 1 is filled with a solution in which volume is two times less than the volume of NaCl solution. Container 2 is filled with a solution of a volume two times larger compared to the NaCl solution. Container 3 is filled with a solution of a volume two times larger than the volume of the solution in container 2. Part A 2 % (m/v) KCl
From the dilution formula, we have that at constant value of the solute, the volume of the solution is inversely proportional to the concentration.
The correct responses are;
Part A: Container 2Part B: Container 3Reasons:
The given parameters are;
The concentration of the KCl solution = 4% m/v
Taking the solution as solution of KCl
The volume of the solution in container 1 = Two times less than the volume of KCl solution.
[tex]V_{container \, 1} = \displaystyle \mathbf{ \frac{1}{2} \cdot V_{4\% \, solution}}[/tex]
The volume of the solution in container 2 = Two times larger compared to the volume of KCl solution.
[tex]V_{container \, 2} = \mathbf{\displaystyle 2 \times V_{4\% \, solution}}[/tex]
The volume of the solution in container 3 = Two times larger than the container two solution volume.
[tex]V_{container \, 3} = \displaystyle \mathbf{ 2 \times V_{container \, 2}}[/tex]
Therefore;
[tex]V_{container \, 3} = \displaystyle 2 \times 2 \times V_{4\% \, solution} = \mathbf{4 \times V_{4\% \, solution }}[/tex]
Part A Required:
a. To select the container that represent the dilution of the 4% solution to 2%
Solution:
The dilution formula is; C₁·V₁ = C₂·V₂
Therefore;
[tex]\displaystyle V_1 = \mathbf{\frac{C_1 \cdot V_1}{C_2}}[/tex]
C₁ =4%, C₂ = 2%, we get;
[tex]\displaystyle V_1 = \frac{4 \cdot V_1}{2} = 2 \cdot V_1[/tex]
The volume of the container that represents a 2% dilution is container 2
which is filled with a solution of a volume two times larger compared to the
KCl solution.
Part B:
Required:
The container diluted to a 1% m/v KCl solution.
Solution;
Using the dilution formula, we have;
C₁ = 4%, C₂ = 1%
Therefore;
[tex]\displaystyle V_1 = \frac{C_1 \cdot V_1}{C_2}[/tex]
[tex]\displaystyle V_1 = \frac{4 \cdot V_1}{1} = \mathbf{4 \cdot V_1}[/tex]
The volume of the solution is four times the volume of the 4% KCl solution, which is equivalent to the volume in container 3.
Possible parts of the question are;
Select the container that represents the dilution of the 4% (m/v) KCl solution to obtain the solutions that follows;
Part A: a 2% (m/v) KCl solution
Part B: a solution that is a 1% (m/v) KCl solution
Please see attached drawings
Learn more here:
https://brainly.com/question/11493179
Determine the molarity for each of the following Solution: 98.0 of phosphoric acids H3PO4 in 1.00L of Solution.
The molarity of the solution is 0.01.
Brainliest?
How much does a cloud weigh in pounds?
Answer:
1.1 million pounds
Explanation:
Answer:
1.1 million pounds
Explanation:
that's a lot of water above us!!
What would be the freezing point of a solution that has a molality of 1.506 m which was prepared by dissolving biphenyl (C12H10) into naphthalene
The freezing point of a solution prepared by dissolving biphenyl (C12H10) into naphthalene is 67.99oC.
Freezing point can be obtained from;
ΔT = K m i
ΔT = freezing point depression
m = molality of the solution = 1.506 m
i = Van't Hoff factor = 1 for molecular substances
K = Freezing constant of naphthalene = 8.15 oC/m
ΔT = 8.15 oC/m × 1.506 m × 1 = 12.27oC
Freezing point of pure naphthalene = 80.26 °C
ΔT = Freezing point of pure naphthalene - Freezing point of solution
Freezing point of solution = Freezing point of pure naphthalene - ΔT
Freezing point of solution = 80.26 °C - 12.27oC = 67.99oC
Learn more:
The octahedral complex ion [MnCl6] 3- has more unpaired spins than the octahedral complex ion [Mn(CN)6] 3- . How many unpaired electrons are present in each species
[MnCl6] 3- is high spin and has five unpaired electrons while [Mn(CN)6] 3- has only two unpaired electrons.
A complex may be low spin or high spin depending on the kind of ligand attached to the central metal atom/ion. If the ligand is a weak field ligand, the complex may be high spin (maximum number of unpaired electrons). If the complex is low spin, there are few unpaired electrons (minimum number of unpaired electrons). In that case, the ligand is a strong field ligand.
In the octahedral geometry, [MnCl6] 3- is high spin and has five unpaired electrons since the chloride ion is a weak field ligand. On the other hand [Mn(CN)6] 3- has only two unpaired electrons because the cyanide ion is a strong field ligand.
Learn more: https://brainly.com/question/6111443
What is the SI unit of time?
OA.
second
OB.
minute
OC. hour
OD. day
Res
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The correct choice is ~ A
S.I unit of time is Second
Oxidation Unit Test
Use the galvanic cell reaction to answer the question.
2Cr(s) + 3Cu2+(aq) → 2Cr3+ (aq) + 3Cu(s)
Which half reaction occurs at the cathode?
(1 point)
The reduction half equation of the galvanic cell is is; 3Cu2+(aq) + 3e ------> 3Cu(s).
A galvanic cell is a cell that produces chemical energy by a spontaneous chemical reaction. The equation of the reaction is; 2Cr(s) + 3Cu2+(aq) → 2Cr3+ (aq) + 3Cu(s). We can see that chromium was oxidized and copper was reduced.
Since reduction occurs at the cathode, it follows that the reduction half equation is; 3Cu2+(aq) + 3e ------> 3Cu(s).
Learn more about galvanic cell; https://brainly.com/question/25606438
hydrodistillation explain ????
Answer:
Explanation:
Hydrodistillation is a traditional method for the extraction of bioactive compounds from plants. In this method, plant materials are packed in a still compartment then water is added in sufficient amount and brought to a boil. ... The vapor mixture of water and oil is condensed by indirect cooling with water.
What does IUPAC stand for?
Answer: International Union of Pure and Applied Chemistry
The International Union of Pure and Applied Chemistry (IUPAC), established in 1919, is the international body that represents chemistry and related sciences and technologies.
can someone tell me if I got this right? so I'm supposed to Match the vocabulary terms with their detentions
Answer:
I hope that help you
Explanation:
energy is change from one form to another called _energy conversion
energy can neither be created nor destroyed it can only be transformed from one form to another called --The law of conservation of energy
cause to change in form character or function called - convert
the last sentensce
energy transformation
A 0.48-mole sample of helium gas occupies a volume of 11.7 L . What is the volume of 0.72 mol of helium gas under the same conditions
AnswerExplanation:I finsished d
Answer:
17.55L
Explanation:
0.48mol : 11.7
0.72mol : x
0.48x = 8.424
x = 17.55
an expression of Avogradros law
Answer:
The formula for Avagadro's law is V1/n1 = V2/n2, where V = volume and n = amount of gas (in moles).
Explanation:
guys help me, please
Answer:
radiation, conduction, convection, conduction
Answer:
radiation , conduction, convection, conduction
The strongest intermolecular interactions between propanol (CH3CH2CH2OH) molecules arise from hydrogen bonding
a. True
b. False
The claim that the strongest intermolecular interactions between propanol molecules arises from hydrogen bonding is True.
Intermolecular forces are weaker attraction forces that are utilized to define physical characteristics of molecules such as:
boiling point temperature densitymelting pointsHydrogen bonding is an type of intermolecular forces.
It is a type of dipole-dipole interaction that only happens when a hydrogen atom is connected to the atomic element of oxygen, nitrogen, or fluorine.
From the question given, in the propanol (CH3CH2CH2OH) molecule, the hydrogen usually has a partially positive charge which attracts the partially negative charge of the oxygen.
Therefore, we can conclude that the claim is True.
Learn more about Hydrogen Bonding here:
https://brainly.com/question/10904296?referrer=searchResults
Cesium-137 is part of the nuclear waste produced by uranium-235 fission. The half-life of cesium-137 is 30.2 years. How much time is required for the activity of a sample of cesium-137 to fall to 8.32 percent of its original value
Answer:
la primera va con la última
HELP HELP HELP ASAPPPP!
So the question is:
Relate the electron configuration pattern to the general trends in atomic properties in the periodic table including definitions
a. Atomic radii (size)
b. Electronegativity
c. Ionization energy
Answer:
b. Electronegativity
Explanation:
electronic configuration
When the following equation is balanced, the coefficients are ________.
NH3 (g) + O2 (g) ---> NO2 (g) + H2O (g)
a. 1,1,1,1
b. 4,7,4,6
c. 2,3,2,3
d. 1,3,1,2
e. 4,3,4,3
Answer:
B
Explanation:
Option B is the correct answer. When you add 7 in front of the O2 in the left side, and then you add 4 and 6 in front of NO2 and H2O respectively, the number of oxygen atoms is the same in both sides.
answer this please thank you
Answer:
6am
Explanation:
answer this please thank you
The melting point of H₂O(s) is 0 °C. Would you expect the melting point of H₂S(s) to be 85 °C, 0 °C or -85 °C.? Justify your choice
Answer:
-85 °C
Explanation:
O and S are in the same group( Group 16). Since S is below O it's atomic mass is higher than O. So molar mass of H2S is higher than H2O. The strength of Vanderwaal Interactions ( London dispersion forces) increases when the molar mass increases. However, only H2O can form H bonds with each other. This is because electronegativity of O is higher than S and therefore H in H2O has a higher partial positive charge than H of H2S.
H bond dominate among these 2 types of forces so the strength of attractions between molecules is higher in H2O than H2S. Therefore more energy should be supplied for H2O to break inter
molecular forces and convert from solid to liquid state than H2S. So mpt of H2O must be higher than that of H2S.
Hello can someone please help me. Me and my mom went to the doctor and the doctor told me I can’t have sex till 19 because of my health problems. But they didn’t tell me what health problems! Can someone tell us there any health things or a name for that?
Answer:
bladder or bowel diseases, or arthritis. These might be your answer.
When the pressure of an equilibrium mixture of SO2, O2, and SO3 is doubled at constant temperature, what the effect on Kp
When the pressure of the equilibrium mixture of SO2, O2, and SO3 is doubled at constant temperature, the Kp is also doubled.
The equation of the reaction is given by; 2SO2 + O2 → 2SO3. The Kp of the reaction is obtained from;
Kp = pSO3^2/pSO2^2 . pO2
Since the Kp depends on the individual partial pressures of each of SO2, O2, and SO3 at equilibrium, if the pressure of the equilibrium mixture is doubled, the Kp is also doubled.
Learn more: https://brainly.com/question/11324711
plate tectonics-1.gif
What is the above image a representation of?
Answer:
Subduction Process where the oceanic plate subducted under the continental plates because it denser than the Continental plate.
Kinetic energy is described as - The answers are stored energy - destroyed energy movement or created energy if you answer the question I will give you the brainiest.
1Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.
Dissolution of KOH, ΔHsoln:
KOH(s) → KOH(aq) (10.1)
Neutralization of solid KOH, ΔHneut:
KOH(s) + HCl(aq) → H2O(l) + KCl(aq) (10.2)
1) Using Hess's law, show how to combine Reaction 10.1 and Reaction 10.2 to give
KOH(aq) + HCl(aq) → H2O(l) + KCl(aq) (10.3)
2)How should ΔHsoln and ΔHneut be combined (mathematically) to give the change in enthalpy for Reaction 10.3, ΔH?
Using Hess's law we found:
1) By adding reaction 10.2 with the reverse of reaction 10.1 we get reaction 10.3:
KOH(aq) + HCl(aq) → H₂O(l) + KCl(aq) ΔH (10.3)
2) The ΔHsoln must be subtracted from ΔHneut to get the total change in enthalpy (ΔH).
The reactions of dissolution (10.1) and neutralization (10.2) are:
KOH(s) → KOH(aq) ΔHsoln (10.1)
KOH(s) + HCl(aq) → H₂O(l) + KCl(aq) ΔHneut (10.2)
1) According to Hess's law, the total change in enthalpy of a reaction resulting from differents changes in various reactions can be calculated as the sum of all the enthalpies of all those reactions.
Hence, to get reaction 10.3:
KOH(aq) + HCl(aq) → H₂O(l) + KCl(aq) (10.3)
We need to add reaction 10.2 to the reverse of reaction 10.1
KOH(s) + HCl(aq) + KOH(aq) → H₂O(l) + KCl(aq) + KOH(s)
Canceling the KOH(s) from both sides, we get reaction 10.3:
KOH(aq) + HCl(aq) → H₂O(l) + KCl(aq) (10.3)
2) The change in enthalpy for reaction 10.3 can be calculated as the sum of the enthalpies ΔHsoln and ΔHneut:
[tex] \Delta H = \Delta H_{soln} + \Delta H_{neut} [/tex]
The enthalpy of reaction 10.1 (ΔHsoln) changed its sign when we reversed reaction 10.1, so:
[tex] \Delta H = \Delta H_{neut} - \Delta H_{soln} [/tex]
Therefore, the ΔHsoln must be subtracted from ΔHneut to get the total change in enthalpy ΔH.
Learn more here:
https://brainly.com/question/2082986?referrer=searchResultshttps://brainly.com/question/1657608?referrer=searchResultsI hope it helps you!
Question 2
Which of the following models the arrangement of atoms in a gas?
O None of these
PLEASE HELP ASAP
Answer:
The option where the atoms are furthest apart.
Explanation:
Gasses are the most energetic of the three basic states of matter, their atoms have more kinetic energy than either solids or liquids and will therefore also have the most spread out atoms.