g Suppose you are titrating an acid of unknown concentration with a standardized base. At the beginning of the titration, you read the base titrant volume as 1.84 mL. After running the titration and reaching the endpoint, you read the base titrant volume as 27.30 mL. What volume, in mL, of base was required for the titration?

Answers

Answer 1

Answer:

25.46 mL

Explanation:

In a titration we use the volume and concentration of a solution to determine the previously unknown concentration of other solution. Let's consider the titration of an acid of unknown concentration with a standardized base (a base whose concentration we know). The generic neutralization reaction is:

HA + BOH ⇒ BA + H₂O

The base is in the buret and we will add it to the acid until the equivalence point is reached. The volume of base used is equal to the difference between the final reading of the buret and the initial reading of the buret.

V = 27.30 mL - 1.84 mL = 25.46 mL


Related Questions

Share the same molecular formula but have different connectivity of atoms and different physical properties.

Answers

Answer:

Constitutional Isomers

Explanation:

Constitutional isomers can be regarded as structural isomers ,these are compounds that have the same molecular formula with different structural formulas. Example is Butane and isobutane; both compound posses the same molecular formula(C4H10) with different structural formulas. compounds of Constitutional isomers are differ in term of connectivity, which

is the way the constituent atoms are been connected to another. It should be noted that Constitutional Isomers Share the same molecular formula but have different connectivity of atoms and different physical properties.

during the process of photosynthesis, green plants produce...

Answers

Answer: photosynthesis

Explanation:

they use carbon dioxide and energy from the sun to make sugar molecules and oxygen

What happens to an electroscope when a negatively charged rod is brought close to the metal sphere at the top?

Answers

Answer:

When the negatively-charged rod is brought close to the electroscope, positive charges are attracted to it and negative charges are repelled away from it. The electroscope has a net neutral charge and the rubber rod has a net negative charge. If they are brought into contact, they will both take a net negative charge.

Explanation:

I looked it up

Three acid samples are prepared for titration by 0.01 M NaOH:

1. Sample 1 is prepared by dissolving 0.01 mol of HCl in 50 mL of water.
2. Sample 2 is prepared by dissolving 0.01 mol of HCl in 60 mL of water.
3. Sample 3 is prepared by dissolving 0.01 mol of HCl in 70 mL of water.

a. Without performing a formal calculation, compare the concentrations of the three acid samples (rank them from highest to lowest).
b. When the titration is performed, which sample, if any, will require the largest volume of the 0.01 M NaOH for neutralization?

Answers

B is the correct answer

HELPP!
how many grams are in 1.50 x 10(24) atoms of copper?

Answers

Answer:

2266g

Explanation:

mass = no.of molecules /6.o23*1o(23) * molar mass

molar mass of co2= 44g /mol

1.5 .10^25/6.023 .10^23 =51.5 moles of co2

51.5 .44g/mol =2266 g

1 mole is equal to 6.023 × 10 ²³ molecules. 2266 grams are in 1.50 x 10²⁴ atoms of copper.

What do you mean by mole ?

The term mole is defined as the amount of substance of a system which contains as many elementary entities.

One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.

The mole concept can be used to convert between mass and number of particles.

mass = number of molecules / 6.023 × 10²³ × molar mass

molar mass of CO2 = 44g /mol

1.5 .10^25 / 6.023 × 10^23

= 51.5 moles of CO2

= 51.5 .44g/mol

= 2266 g

Thus, 2266 grams are in 1.50 x 10²⁴ atoms of copper.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ6

can yall please help im very slow

Answers

Answer:

turtle

Explanation:

they are slow and they take there time

Waves are generated when energy passes through causing them to move matter through ____ ?

Answers

Answer:

sending heat waves and vibrations

Guanidine is a neutral compound but is an extremely powerful base. In fact, it is almost as strong a base as a hydroxide ion. Identify which nitrogen atom in guanidine is so basic, and explain why guanidine is a much stronger base than most other amines.

Answers

Answer:

See explanation

Explanation:

The molecule called guanidine is shown in the image attached to this answer. It contains three nitrogen atoms. Two among them are sp3 hybridized while one of them is sp2 hybridized.

Guanidine is more basic than other amines because its protonanation leads to the formation of three equivalent resonance structures thereby making its protonated form quite stable. This effect is not observed in other amines.

Also, the sp2 hybridized nitrogen atom is more basic and more easily protonated because when it is protonated, three equivalent resonance structures are obtained.

Write a word equation for
H2O2 + liver

Answers

Answer:

h2o2 and liver produce oxygen gas

You dissolve 14 g of Mg(NO3)2 in water and dilute to
750 mL. What is the molarity of this solution?

Answers

Answer:

0.127M

Explanation:

Molarity of a solution = number of moles (n) ÷ volume (V)

Molar mass of Mg(NO3)2 = 24 + (14 + 16(3)}2

= 24 + {14 + 48}2

= 24 + 124

= 148g/mol

Using the formula, mole = mass/molar mass, to convert mass of Mg(NO3)2 to mole

mole = 14g ÷ 148g/mol

mole = 0.095mol

Volume = 750mL = 750/1000 = 0.75L

Molarity = 0.095mol ÷ 0.75L

Molarity = 0.127M

What happens to milk when it is poured from a rectangular container into a round glass? (2 points)

Group of answer choices

The milk changes state from a liquid to a solid in the round glass.

The volume of the milk increases when it is poured into a round glass.

The volume of the milk decreases when it is poured into a round glass.

The milk takes the shape of the round glass.

Answers

Answer:

The milk takes shape of the round glass.

If we have 1.23 mol of NaOH in solution and 0.85 mol of Cl2 gas is available to react, which one is the limiting reactant? Give your reason.​

Answers

Answer:

NaOH is the limiting reactant.

Explanation:

Hello there!

In this case, since the reaction taking place between sodium hydroxide and chlorine has is:

[tex]NaOH+Cl_2\rightarrow NaCl+NaClO+H_2O[/tex]

Which must be balanced according to the law of conservation of mass:

[tex]2NaOH+Cl_2\rightarrow NaCl+NaClO+H_2O[/tex]

Whereas there is a 2:1 mole ratio of NaOH to Cl2, which means that the moles of the former that are consumed by 0.85 moles of the latter are:

[tex]n_{NaOH}=0.85molCl_2*\frac{2molNaOH}{1molCl_2}\\\\n_{ NaOH}=1.7molNaOH[/tex]

Therefore, since we just have 1.23 moles out of 1.70 moles of NaOH, we infer this is the limiting reactant.

Regards!

You have 100 mL of a solution of benzoic acid in water; the amount of benzoic acid in the solution is estimated to be about 0.30 g. The distribution coefficient of benzoic acid in diethyl ether and water is approximately 10. Calculate the amount of acid that would be left in the water solution after four 20-mL extractions with ether.

Answers

Answer:

0.00370 g

Explanation:

From the given information:

To determine the amount of acid remaining using the formula:[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{(initial \ mass \ of \ solute )_{water}} = (\dfrac{v_2}{v_1+v_2\times k_d})^n[/tex]

where;

v_1 = volume of organic solvent = 20-mL

n = numbers of extractions = 4

v_2 = actual volume of water = 100-mL

k_d = distribution coefficient = 10

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = (\dfrac{100 \ ml}{100 \ ml +20 \ ml \times 10})^4[/tex]

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = (\dfrac{100 \ ml}{100 \ ml +200 \ ml})^4[/tex]

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = (\dfrac{1}{3})^4[/tex]

[tex]\dfrac{(final \ mass \ of \ solute)_{water}}{0.30 \ g} = 0.012345[/tex]

Thus, the final amount of acid left in the water = 0.012345 * 0.30

= 0.00370 g

What is the pOH of 0.5 M KOH?

Answers

Answer:

pOH = 0.3

Explanation:

As KOH is a strong base, the molar concentration of OH⁻ is equal to the molar concentration of the solution. That means that in this case:

[OH⁻] = 0.5 M

With that information in mind we can calculate the pOH by using the following formula:

pOH = -log[OH⁻]pOH = -log(0.5)pOH = 0.3

The value of ΔH° for the reaction below is -6535 kJ. ________ kJ of heat are released in the combustion of 16.0 g of C6H6 (l)?

2C6H6 (l) + 15O2 (g) → 12CO2 (g) + 6H2O (l)

Answers

Answer:

the value of H° is below -6535 kj. +6H2O

Explanation:

6H2O answer solved

For the given reaction, 2 moles of C₆H₆ the heat energy released is - 6535 KJ. Then, for 16 g of the compound or 0.205 moles needs 669.83 KJ of heat released in combustion.

What is combustion ?

Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, typically oxygen, resulting in the release of heat, light, and various combustion products, such as carbon dioxide and water vapor.

The process of combustion involves a rapid and exothermic (heat-releasing) oxidation reaction that produces a flame, which is visible in many cases.

Here, 2 moles of the hydrocarbon releases - 6535 KJ of energy.

molar mass of C₆H₆ = 78 g/mol

then no.of moles in 16 g = 16 /78 = 0.205 moles.

then energy released by 0.205 moles  = 0.205 moles × 6535 KJ /2 moles = 669.83 kJ

Therefore, the heat energy released by 16 g of the compound in combustion is 669.83 kJ.

Find more on combustion :

https://brainly.com/question/13153771

#SPJ2

chemistry please help​

Answers

a. Process: I think it’s the Haber Process.

b. The substance represented by the letter C is Hydrogen.

c. The conditions represented by Y and Z needed for the process are 450 degrees Celsius and 200 atm, respectively.

d. i. The catalyst used is a finely divided iron (Fe) catalyst.
ii. I think the main ore from which the catalyst is extracted is Iron.

e. Balanced chemical equation for the reaction shown in the diagram:
N2(g) + 3H2(g) ⇆ 2NH3 (g)

f. One use of Ammonia is as a fertilizer.

To determine the freezing point depression of a LiCl solution, Toni adds 0.411 g of LiCl to the sample test tube along with 19.7 mL of distilled water. Determine the molal concentration (m) of the resulting solution. MWLiCl

Answers

Answer:

LiCl = 0.492 m

Explanation:

Molal concentration is the one that indicates the moles of solute that are contained in 1kg of solvent.

Our solute is lithium chloride, LiCl.

Our solvent is distilled water.

We do not have the mass of water, but we know the volume, so we should apply density to determine mass.

Density = mass / volume

Density . volume = mass

1 g/mL . 19.7 mL = 19.7 g

We convert g to kg → 19.7 g . 1 kg / 1000g = 0.0197 kg

Let's determine the moles of LiCl

0.411 g . 1 mol / 42.394 g = 9.69×10⁻³ moles

Molal concentration (m) = 9.69×10⁻³ mol / 0.0197 kg → 0.492 m

The molal concentration of the resulting solution is 0.492 m. The concentration number of moles of solute in one kg of solvent.

What is Molal concentration?

It is the measure of the concentration number of moles of solute in one kg of solvent.

To calculate the molal concentration first calculated the mass of [tex]\bold {LiCl}[/tex],

[tex]\rm \ mass = density \times volume[/tex]

Put the values,

m = 1 g/mL x  19.7 mL

m = 19.7 g     or

m = 0.0197 kg

Calculate the moles of LiCl:

[tex]n =\rm \dfrac { 0.411 \ g \times 1 mol }{ 42.394 \ g }\\\\n = 9.69\times 10^{-3} \ moles[/tex]

So, now the molal concentration,

[tex]m = \rm \dfrac { 9.69\times 10^{-3}\ mol} {0.0197 \ kg} \\\\m = 0.492[/tex]

Therefore, the molal concentration of the resulting solution is 0.492 m.

Learn more about molal concentration:

https://brainly.com/question/4580605

cấu hình electron của nguyên tử Ca

Answers

Explanation:

Do đó cấu hình electron của canxi là: 1s2 2s2 2p6 3s2 3p6 4s2.

All bases dissociate
True or false

Answers

Answer:

verdadero

Explanation:

porque esoo [tex]\lim_{n \to \infty} a_n x_{123} \frac{x}{y} \sqrt[n]{x} x^{2} \sqrt{x} \pi \neq \lim_{n \to \infty} a_n \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right] \int\limits^a_b {x} \, dx \left \{ {{y=2} \atop {x=2}} \right.[/tex] 

why it is wrong to use the term 'Pure Air' in Science?

Answers

Explanation:

Air is a combination of other gases, dust particles, pollens, spores etc. This means that air is a heterogeneous mixture where particles are unevenly distributed.

Air is not considered as a pure substance because there is not one element present in air. A substance which contains only one type of element is called a pure substance.

Therefore, it is wrong to use the term 'Pure Air' in Science.

Why is the reaction between potassium (K) and chlorine (Cl) considered an oxidation-reduction reaction? (4 points) K(s) + Cl2(g) → 2KCl(s) Select one: a. Chlorine reduces in size when it reacts with potassium. b. Chlorine takes electrons from potassium in the reaction. c. Potassium reduces in strength when it bonds with chlorine. d. Potassium takes chlorine's place in the reaction.

Answers

Answer:

(b) Chlorine takes electrons from potassium in the reaction.

Explanation:

Oxidation-Reduction: A reaction in which electrons are exchanged from one substance to another, also called redox.

In K(s) + Cl2(g) → 2KCl(s) , the electrons are being exchanged between one another. In this case, Chlorine atoms are taking electrons from potassium.

you're welcome

The reaction has been termed the oxidation-reduction reaction, as Chlorine takes electrons from potassium. Thus, option C is correct.

The reaction between Chlorine and Potassium has resulted in the formation of Potassium Chloride. The reaction has been termed the ionic redox reaction.

The redox reaction can be described as the oxidation-reduction reaction in which the oxidation of an atom by the loss of electrons, results in the reduction of another atom by the gain of the electron.

In the reaction of Chlorine and Potassium, there has been the loss of electron potassium and the gain of electrons by Chlorine. Thereby Potassium is getting oxidized, and Chlorine is getting reduced.

Thus, the reaction has been termed the oxidation-reduction reaction, as Chlorine takes electrons from potassium. Thus, option C is correct.

For more information about the oxidation-reduction reaction, refer to the link:

https://brainly.com/question/4222605

A solution containing 1.22 g of a diprotic acid H2CH2O4 (malonic acid)
was titrated with 45.5 mL of NaOH to reach the second equivalence
point. What is the concentration of the NaOH solution? (MW_malonic
acid = 104.06 g/mol)

Answers

Answer:

0.515 M

Explanation:

The reaction that takes place is:

H₂CH₂O₄ + 2NaOH → Na₂CH₂O₄ + 2H₂O

First we convert 1.22 g of malonic acid into moles, using its molar mass:

1.22 g ÷ 104.06 g/mol = 0.01172 mol

Then we convert 0.01172 malonic acid moles into NaOH moles, using the stoichiometric coefficients of the balanced reaction:

0.01172 mol H₂CH₂O₄ * [tex]\frac{2molNaOH}{1molH_2CH_2O_4}[/tex] = 0.02344 mol NaOH

Finally we calculate the concentration of the NaOH solution, using the number of moles and given volume:

Converting 45.5 mL ⇒ 45.5/1000 = 0.0455 L

0.02344 mol / 0.0455 L = 0.515 M

You have reacted 100.00mL of 1.353M aqueous sulfuric acid with 12.618g of sodium hydroxide solid. If all of the heat generated by this reaction is transferred to a 1.317kg block of copper metal initially at 16.82°C, what is the final temperature of the block of copper metal? (Specific heat of copper = 0.375J/g*°C)

Answers

Answer:

70.137 °C

Explanation:

The reaction generated from the question can be expressed as:

[tex]2NaOH_{(s)} + H_2SO_{4(aq)} \to Na_2SO_{4(aq)} +2H_2O_{(l)}[/tex]

The enthalpy reaction:

[tex]\Delta H^0 _{rxn} = \sum \Delta H^0 _{f (products)} - \sum \Delta H^0 _{f (reactants)}[/tex]

[tex]\Delta H^0 _{rxn} =[2 \times \Delta H^0 _f (H_2O) + \Delta H^0 _f (Na_2SO_4) ] -[2 \Delta \times H^0 _f (NaOH) + \Delta H^0 _f (H_2SO_4) ][/tex]

Repacing the values of each compound at standard enthalpy conditions;

[tex]\Delta H^0 _{rxn} =[2 \times -279.4 + (-1384.49)]-[(2\times -418) -913]\ kJ[/tex]

[tex]\Delta H^0 _{rxn} =-194.29 \ kJ[/tex]

no of moles of NaOH = 12.618g/39.99 g/mol

= 0.3155 mol

no of moles of H₂SO₄ = molarity of H₂SO₄ × Volume

= 1.3553 mol/L × 100 × 10⁻³ L

= 0.13553 mol

From the reaction,

1 mol of NaOH = 2 × mol of H₂SO₄

Since mol of NaOH is greater than that of  H₂SO₄, then NaOH is the excess reagent and H₂SO₄ is the limiting reactant

1 mol of H₂SO₄ yields = - 194.29 kJ

0.13553 mol of H₂SO₄ will yield;

[tex]= \dfrac{-194.29 \ kJ}{1 \ mol} \times 0.13553 \ mol[/tex]

= -26.332124 kJ

= -26332.12 J

Finally,

Heat(q) = [tex]m_{(copper)} \times C_{(copper)}\times \Delta T[/tex]

26332.12 J = 1.317 × 10³ g × 0.375 J/g°C ×ΔT

26332.12 J = 493.875 J/° C  × ΔT

26332.12 /  493.875 = ΔT

ΔT = 53.317 °C

[tex]T_f - T_i = 53.317 ^0 C[/tex]

[tex]T_f[/tex]- 16.82 °C = 53.317 °C

[tex]T_f[/tex] = (53.317 + 16.82) °C

[tex]T_f[/tex] = 70.137 °C

HELP!!! i will give brainliest!!

Different chemical elements have different chemical symbols, and this is determined by their atomic structure. Look at the two chemical symbols in the image. Compare and contrast the atomic symbols and the atomic structure of fluorine and oxygen.

Answers

Answer:

Explanation:

fluorine have gained one electron that is why the sign is -1. they both have different number of protons. They have different neutron numbers. F have 10 and O have 8.

hope this helps :)

QUESTIONS :
1.
Many of the flavours and smells of fruits are esters. A learner prepared an ester with a sme
Ilke banana in the school laboratory using pentanol and ethanoic acid. She set up the
apparatus as shown in the diagram below.
PAPER TOWEL DIPPED
-WATER BATH
IN COLD WATER
PEITANOL ETHANOIC
ACID+ 4 DROPS OF
SULPHURIC ACID
1.1 Which property of sulphuric acid makes it suitable to use as a catalyst for the
preparation of esters?
1.2 Why do we heat the test tube in a water bath and not directly over a flame?
1.3 With reference to the characteristic smells of esters, name TWO examples where
esters are used in different industries.
1.4 State ONE function of the wet paper towel in the opening of the test tube.
1.5 Write down the IUPAC name of an ester fomed.​

Answers

Answer:

See explanation

Explanation:

Esterification is a reaction that involves the combination of an alkanoic acid and an alkanol. The product is always a sweet smelling substance.

Sulphuric acid acts as a catalyst in this reaction because it is a dehydrating agent thereby pushing the equilibrium position towards the right by the removal of water molecules.

The test tubs is heated in a water bath and not directly moved the flame because the alcohol is flammable. Also heating in a water bath helps to separate the reaction mixture from the newly formed ester.

Esters are used in industries that produces soaps and perfumes. There is a great need for the use of fragrances which are ester compounds in these industries.

The wet paper towel in the opening of the test tube cools the top of the test tube. It usually serves as a kind of condenser preventing an excess loss of vapour from the reaction mixture.

The reaction of pentanol and ethanoic acid yields pentyl ethanoate according to IUPAC nomenclature.

Plutonium-238 is a radioactive element that decays over time into a less harmful element at a rate of 0.8 % per year. A power plant has 50 pounds of plutonium-238 to dispose of. How much plutonium-238 will be left after 10 years

Answers

Answer:

46 pounds

Explanation:

Let the amount of Plutonium-238 left after 10 years be P

Let the initial mass of Plutonium-238 be Po

Let the rate of decay be r

Let the time taken be t

Hence;

P = Poe^-rt

P= 50e^-0.008×10

P= 46 pounds

What are fluids? Why are they so called?​

Answers

Fluids are liquid and gases. They take the shape of their containers. They are called fluids because of their ability to flow.

Which equation represents an addition reaction?

Answers

Answer:

Reactions in which a multiple bond between two atoms becomes partly or fully saturated by covalent attachments... A typical addition reaction may be illustrated by the hydrochlorination of propene (an alkene), for which the equation is CH3CH = CH2 + HCl → CH3C+HCH3 + Cl− → CH3CHClCH3.

Explanation:

thank me later

CH3CH = CH2 + HCl → CH3C+HCH3 + Cl− → CH3CHClCH3.

This reaction is the example of addition reaction.

What is an addition reaction?

An addition reaction is defined as a chemical reaction in which two or more molecules combine to produce a bigger molecule. This type of reaction is called addition reaction.

So we can conclude that the formation of bigger molecule is the example of addition reaction.

Learn more about reaction here: https://brainly.com/question/26018275

#SPJ2

An unknown organic compound composed of carbon, hydrogen and oxygen was analyzed and found to be 50.84% C, 8.53% H and the rest being oxygen. Which of the following represents the correct empirical formula for the compound?
(a) CH2O
(b) C3H602
(c) C4H803
(d) C2H40
(e) C5H1003

Answers

Answer:

e) C5H10O3

Explanation:

According to the information given in this question;

50.84% represents C

8.53% represents H

[100% - (50.84 + 8.53)]

= 100 - 59.37

= 40.63% of Oxygen (O)

This percentage means that;

Carbon = 50.84g

Hydrogen = 8.53g

Oxygen = 40.63g

By dividing by their respective atomic masses, we convert to moles:

C = 50.84g ÷ 12 = 4.24mol

H = 8.53g ÷ 1 = 8.53mol

O = 40.63g ÷ 16 = 2.54mol

Next we divide by the smallest no of the values (2.54mol)

C = 4.24 ÷ 2.54 = 1.669

H = 8.53 ÷ 2.54 = 3.358

O = 2.54 ÷ 2.54 = 1

To get a simple whole number ratio, we multiply the results by 3

C = 1.669 × 3 = 5.007

H = 3.358 × 3 = 10.074

O = 1 × 3 = 3

Simple whole number ratio of carbon, hydrogen and oxygen is 5:10:3. Hence, the empirical formula is C5H10O3.

What is used to measure P? To measure T? in Gas laws​

Answers

Answer:

P = pressure T = temperature

Other Questions
Replanting trees on a bare hillside is an EXAMPLE of Which is true about biomechanical principles? a. Allows for more specific feedback to ehance performance b. Courses are not required for a degree in physical education c. There are 10 biomechanical principles d. None of the above History should be studied because it is essential to individuals and to society, and because it harbors beauty. There are many ways to discuss the real functions of the subject - as there are many different historical talents and many different paths to historical meaning.History should be studied because it is essential to individuals and to society, and because it harbors beauty. There are many ways to discuss the real functions of the subject - as there are many different historical talents and many different paths to historical meaning.Peter N. Sterns, "Why Study History?" 1998 According to the writer, what is the best reason for why history is important? Write the word sentence as an inequality.3.2 less than a number t is at most 7.5 please help me im in need of serious help or ill flunk :( A newly constructed water treatment facility cost $2 million. It is estimated that the facility will need renovating every 30 years at a cost of $1 million. Annual repairs and maintenance are estimated to be $100,000 per year. At an interest rate of 6%, determine the capitalized cost of the facility Right-of-way isA. the immediate use of a certain part of the roadwayB. the permission to disobey a traffic control deviceDC. taken, not given to youdifferent in each US state Which is a common symbol of love and commitment?a national flaga white dovea wedding ringa music note 6. Which of the following represent kinetic energy? *(1 Point)the water behind a damO a boulder hug from a net over a pita calculator falling to the floorthe string on a bow before being released What is the answer? The question is on the picture HELP ME PLZ WILL MARK U AS BRAINLIEST What is the value of xA. 100 B.50 C.25 D.35 Ayuda con estos ejercicios Porfavor es para Maana Find the measurement of PON Write a function for:The output is 5 less than twice the input.O y= 1/2x-5y=5 - 2xO y=2x - 5O y= 5x - 2 Need help with this please! How do the friendships that Bruno has in Berlin at the beginning of the movie compare with his friendship with Shmuel? World War II is often referred to as the "Good War." Evaluate that title for the war. Is it appropriate? Why or why not? f(x)=4 hallar el dominio, codominio, ceros o raices, vertices, asintotas, tabla de valores, graficas, identificar el tipo de funcion what do ribosomes do in animal cells