The system's steady-state response is 0.05 m for F(t) = 200 cos(10t) N. The steady-state response of the system is 0.10 m for F(t) = 200 cos(20t) N.
Part A's excitation frequency is 10 rad/s, while the system response frequency is 20 rad/s. According to the frequency response function, the steady-state response has a magnitude of 0.25 m.
Therefore, the steady-state response is 0.25 m cos (10t + 0.8 radians), where 0.8 radians is the phase angle of the system response.
Both the system response frequency and the excitation frequency for part b are 20 rad/s. According to the frequency response function, the steady-state response has a magnitude of 0.5 m.
The question is incomplete I answered it in general way.
Given ωn= 20 rad/s and δst = 0.05 m, the frequency response function of the vibration system is given. If the excitation function is a. F(t) = 200 cos(10t) N, b. F(t) = 200 cos(20t) N, Using the figures above to obtain the steady-state responses of the system.
To know more about steady-state response
https://brainly.com/question/27548387
#SPJ4
classify each of the following amines as primary (1∘), secondary (2∘), or tertiary (3∘):
Amine classification: Primary, Secondary Amines, which are derivatives of ammonia, are categorized as primary (1°), secondary (2°), and tertiary (3°) based on how many hydrogen atoms in the ammonia molecule have been replaced by alkyl or aryl groups.
A primary amine is created when one alkyl group replaces one hydrogen atom in NH 3. primary, secondary, tertiary, or quaternary amine as 1o, 2o, 3o, or 4° (CH3)4N+ .
(C₂H₅)CHNH₂ N atom is directly connected with only one C atom (i.e. one alkyl group) So, it is a primary amine.
An intermolecular interaction involves primary and secondary amines. This is because the nitrogen in one molecule and the hydrogen in another molecule form a hydrogen bond. This intermolecular interaction is more prevalent in primary amines compared to secondary amines.
To know more about Amine
https://brainly.com/question/29076299
#SPJ4
two prospectors are pulling on ropes attached around the neck of a donkey that does not want to move. one prospector pulls with a force of 50 lb, and the other pulls with a force of 75 lb. if the angle between the ropes is 25 degrees, then how much force must the donkey use in order to stay put? 8. a cannon ball is placed on a 12 degree incline., a force of 9.6 pounds is required to keep the ball in place. determine the weight of the ball.
The ball in place. determine the weight of the ball. Fr = 14920 is the correct answer.
Using the formula of Force
The Donkey is reportedly being dragged by two prospectors using ropes with gives of F1 = 50 lb and F2 = 75 lb and an angle of 25° between the ropes.
Therefore, the Donkey must exert force that is equivalent to and directed in the opposite direction as the force that the rope is applying to the Donkey.
Consequent force is
Fr = [tex]F1^{2}[/tex] + [tex]F2^{2}[/tex] + 2F1F2 Cos (25°)
After entering the values, we obtain
Fr = [tex]50^{2}[/tex] + [tex]75^{2}[/tex] + (2)(50)(75) Cos (25°)
Fr = 2500 + 5625+ (2)(50)(75) (0.906)
Fr = 2500 +5625 + 6795
Fr = 14920
To learn more about Force:
https://brainly.com/question/12785175
#SPJ4
What are the three importance of carbon dioxide?
The fact that CO2 is a greenhouse gas is important. This implies that CO2 traps heat near to Earth in the atmosphere. It enables our planet to retain part of the heat from the Sun so that not all of the energy escapes back into space.
What function does carbon dioxide serve?Carbon dioxide is a crucial greenhouse gas that helps keep heat in our atmosphere. Without it, our planet would be too cold to support life. But other aspects of Earth's climate are being impacted by an increase in average global temperatures spurred on by growing CO2 levels in our atmosphere.
What three functions does carbon serve?All known biological systems depend on carbon, and life would not be possible without it. There is carbon in the form of hydrocarbons, such as fossil fuel, methane gas, and crude oil, that are not found in food or wood. Since carbon fibers are strong, lightweight, and long-lasting materials, they have a variety of purposes.
To know more about carbon dioxide visit:-
https://brainly.com/question/1923482
#SPJ4
the man at a wishes to throw two darts at the target at b so that they arrive at the same time.
"If the darts are thrown at the same speed then (B) Projectile that travels along trajectory B was projected earlier and (C) Second dart must be projected at angle, such that 0 + 0,8 = 90° is correct."
Initial speed of dart A = u'
Angle of dart A = θ'
Initial speed of dart B = u''
Angle of dart B = θ''
Both darts start out at the same speed,
Thus, u' = u'' = u
The darts are launched one at a time from the same location A, but not simultaneously. However, they cover the same horizontal distance and arrive at B simultaneously.
Since both darts' horizontal ranges are equal,
= [ u²sin(2θ') / g ] = [ u²sin(2θ'') / g ]
= sin(2θ') = sin(2θ'')
Although θ' is not equal to θ", we can infer that θ" >θ' from the figure.
Since both are acute angles,
= sinθ'' > sinθ'
Multiplying both sides by 2u/g, we get,
= [ 2u X sinθ'' / g ] > [ 2u X sinθ' / g ]
so that the two darts' respective trajectories are as follows:
= T'' > T'.
Thus, statement B and C are correct options.
The given question is incomplete. The complete question is '(A) Projectile that travels along trajectory A was projected earlier (B) Projectile that travels along trajectory B was projected earlier. (C) Second dart must be projected at angle e, such that 0 + 0,8 = 90° (D) Second dart must be projected at angle , >, STA.'
To know more about darts:
https://brainly.com/question/30073861
#SPJ4
What are the 7 types of electromagnetic waves from left to right?
Radio waves, microwaves, infared waves, visible light, ultra-violet, x-Rays and gamma rays are the 7 types of electromagnetic waves from left to right.
The electromagnetic spectrum's longest wavelengths are found in radio waves, a kind of electromagnetic radiation.
Wavelengths of electromagnetic radiation, which include microwaves, typically range from one meter to one millimeter.
Longer wavelengths than visible light characterize infrared electromagnetic energy, also referred to as infrared light.
The area of the electromagnetic spectrum that is visible to the human eye is referred to as the visible spectrum.
A type of electromagnetic radiation with a shorter wavelength than visible light is ultraviolet radiation (UV).
A penetrating kind of high-energy electromagnetic radiation is an X-ray or, much less frequently, an X-radiation.
Sharp electromagnetic radiation waves called gamma rays, also referred to as gamma radiation, are created when atomic nuclei break down radioactively.
For more information on electromagnetic waves kindly visit to
https://brainly.com/question/3101711
#SPJ4
What are the 4 types of diseases with examples?
Infectious diseases, deficient diseases, hereditary diseases (covering both genetic disorders and non-genetic hereditary diseases), and physiological diseases are the four primary categories of disease.
Give examples of the different diseases.Asthma. Chronic pulmonary condition known as asthma is characterized by episodes of airway blockage and narrowing that result in wheezing, coughing, chest tightness, and shortness of breath. Autoimmune Conditions. ALPS, or Autoimmune Lymphoproliferative Syndrome Cholera. Coronaviruses. The dengue virus.
Which five diseases are they?Each year, infectious diseases afflict billions of individuals worldwide. These infectious diseases are the five most prevalent, say the WHO and CDC. Infectious diseases are illnesses brought on by pathogens—dangerous organisms—that enter your body from the outside.
To know more about types of diseases visit:-
https://brainly.com/question/8611708
#SPJ4
the equipment you have to use is a force sensor, multiple carts, multiple masses, multiple springs, a track and some clamps. by putting the cart in motion and observing the oscillation we can see the reduction in amplitude over time and use that to model the decaying amplitude. that model will allow us to evaluate b for the oscillation. our guided question is: is the damping coefficient of a spring-cart system independent of mass?
Yes, the damping coefficient of a spring-cart system independent of mass. Mass doesn't affect the damping coefficient (since that is assumed constant).
Damping coefficient - The system’s damping coefficient is a measure of how quickly it returns to rest as the frictional force dissipates its oscillation energy.
Damping is experienced by most oscillatory systems such as harmonic oscillators. These systems, when displaced from their equilibrium position, experience a restoring force proportional to their displacement. If a frictional force proportional to the velocity is also applied, the system exhibits damped harmonic oscillation. In a damping phenomenon, the amplitude of the oscillation is decreasing gradually instead of sudden decreasing. When there is a damping in the system then the amplitude decreases and the period increases.
So, We can see that mass will absolutely affect the damping ratio, but not the damping coefficient (since that is assumed constant).
learn more about Damping coefficient:
https://brainly.com/question/20115234
#SPJ4
ezrah attached a baseball to a small rope that is 0.50 meters in length. He then began spinning the string with rotational speed of 2.0 rotations per second. predict how to tangential velocity of the ball would change if ezrah reduced the length of the rope to 0.25 meters and rotational speed is help constant
if Ezra reduced the length of the rope to 0.25 meters and rotational speed is held constant, There is a change of 3.14 m/sec in the velocity when length of rope is reduced from 0.50 to 0.25 m.
What is rotational speed?The no. of revolutions made by a rotating object in a given defined time is termed as rotational speed.
Solution:
Given:
initially length of rope i.e. R = 0.50m
2 rotations per second = 1 rotation =0.5 sec= T
now after changing ropes length R=0.25 m
Initially velocity of the ball rotating on R =0.50m
⇒v=2πR/T
⇒v=2*3.14*0.50/0.5
⇒v=6.28 m/sec
6.28 m/sec is the velocity of the ball rotating on R =0.50m.
Now to find the velocity of the ball rotating on R =0.25m we use the following eq.
⇒v=2πR/T
⇒v=2*3.14*0.25/0.5
⇒v=3.14 m/sec
3.14 m/sec is the velocity of the ball rotating on R =0.25m
Hence, there is a change of 3.14 m/sec in the velocity when length of rope is reduced from 0.50 to 0.25 m.
To know more about rotational speed visit
https://brainly.com/question/17025846
#SPJ1
Imagine a scientist detects an electromagnetic wave with a higher frequency than that of most gamma-ray waves. The scientist calls these waves delta rays. Which of these statements would be true of delta rays?.
The correct answer is option B,
Delta rays would have the same wavelength as most gamma rays.
The term "delta ray" is commonly used to refer to any rebound particle produced by secondary ionization.
A delta ray is a secondary electron with sufficient energy to escape from the initial radiation beam and trigger more ionization.
J. J. Thomson was the author of the phrase.
Gamma radiation, commonly referred to as gamma rays, are piercing electromagnetic radiation waves that result from the radioactive disintegration of atomic nuclei.
It comprises of electromagnetic waves with the shortest wavelengths, often shorter than X-rays.
Delta rays are by-products of the secondary ionization of molecules.
They are composed of sluggish electrons and other ionizing radiation-produced particles and have extremely little penetration strength.
Ionizing radiation causes particles to discharge their atoms, creating delta rays as a result.
For more questions on Delta rays
https://brainly.com/question/28978012
#SPJ4
The complete question may be like this:
Imagine a scientist detects an electromagnetic wave with a higher frequency than that of most gamma-ray waves. Scientist calls these waves delta rays. Which of these statements would be true of delta rays?
A.) Delta rays would have more energy than most gamma rays do.
B.) Delta rays would have the same wavelength as most gamma rays.
C.) Delta rays would have a longer wavelength than most gamma rays have.
D.) Delta rays would travel faster than most gamma rays.
What are 2 literary devices we see in satire?
The 2 literary devices we see in satire are:
Irony: Gap between what is said and what is meant.
Hyperbole: A literary term for exaggerating a particular event or person.
What is satire?
Satire is a genre of visual, literary, and performing arts, usually fiction, rarely non-fiction, is intended to embarrass or disclose Improve a company, government, or society itself. Although satire is usually intended to be humorous, its more important purpose is often constructive social criticism, drawing witty attention to specific and broader societal issues.
The hallmark of satire is strong sarcasm and irony - according to literary critic Northrop Fry, "in satire sarcasm is warlike" - but parody, burlesque, exaggeration, juxtaposition, comparison, Analogies, double entenders, are all commonly used in satirical speaking and writing. This "belligerent" cynicism and cynicism often professes to condone (or at least take for granted) exactly what the satirist wants to question.
The 2 literary devices we see in satire are:
Irony: Gap between what is said and what is meant.
Hyperbole: A literary term for exaggerating a particular event or person.
To know more about Satire, visit:
https://brainly.com/question/4230795
#SPJ4
How do you calculate the speed of emitted photoelectrons?
The formula to calculate speed of emitted photoelectron is KE = 1/2mv²
What is Photoelectric effect?The process through which electrons leave a metal's surface after absorbing electromagnetic radiation is known as the photoelectric effect.
Since photons are the units of light, according to Einstein's theory, when a photon collides with a metal's surface, the full photon's energy is transferred to the electron. A portion of this energy is utilized to free the electron from the metal atom's hold, while the remainder is transferred as kinetic energy to the ejected electron.
Three crucial aspects of the photoelectric effect are not explicable by classical physics: (1) the lack of a lag time; (2) the independence of the photoelectrons' kinetic energy from the strength of the incident radiation; and (3) the presence of a cut-off frequency.
To learn more about Photoelectrons from given link
https://brainly.com/question/30007912
#SPJ4
What type of friction is sliding?
Sliding friction, also known as kinetic friction, is indeed a contacting force that opposes the motion of two items sliding against one another or between a body and a substrate.
How can kinetic friction be determined?
Ff=kFN F f = k F N, where k is the multiplier of frictional force and FN is the object's normal force, is the equation for kinetic friction.
Which four forms of kinetic friction are there?
The force that prevents one solid item from moving across another is known as friction. Surface tension, sliding friction, rolled tension, and fluid friction are the four main categories of friction.
To know more about kinetic friction visit :
https://brainly.com/question/13828735
#SPJ4
a 7500 kg rocket blasts off vertically from the launch pad with a constant upward acceleration of 2.25 m>s and feels no appreciable air resistance. when it has reached a height of 525 m, its engines suddenly fail; the only force act- ing on it is now gravity. (a) what is the maximum height this rocket will reach above the launc
2=2×9.8(48.6)2=121mThe maximum displacement above pad is given by '
ymax=y1+y2=525+121=646 m The velocity just before crashing is given by vA22=vC2+2gymax ⇒(3) By substitution in (2) get that vA2=2×9.8×646≈113 m/s vA2=2×9.8×646 ≈113m/s the maximum height this rocket will reach above the launc is ymax=646M.
What is subject to the effects of gravity?Whether an object is moving or not, gravity still exerts a pull on it.In real life, an object's gravitational pull does not vary considerably when it ascends above the Earth.
when only gravity is exerting a force on it?An object is considered to be in terminal decline when gravity is the only force affecting it.9.8 m/s is the acceleration caused by gravity.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
What is the unit of wavelength?
The unit of wavelength depends on the type of wave being described. In the International System of Units (SI), the unit of wavelength is the meter (m). This is the case for most types of waves, including electromagnetic waves (such as light), sound waves, and mechanical waves.
What is wavelength?
Wavelength is the distance between two consecutive points of the same phase on a wave. It is the distance traveled by a wave in one period (the time it takes for the wave to complete one cycle). The wavelength is usually denoted by the Greek letter lambda (λ).
For example, the wavelength of a radio wave might be measured in meters, the wavelength of visible light might be measured in nanometers (nm), and the wavelength of a sound wave might be measured in centimeters (cm).
In some fields of physics, other units of length may be used to express wavelength. For example, in the field of quantum mechanics, the unit of length is often the angstrom (Å), which is equal to 0.1 nanometers (nm).
Therefore, the unit of wavelength varies depending on the type of wave.
To learn more about wavelength from the given link:
https://brainly.com/question/29548846
#SPJ4
a 500 w heating unit is designed to operate with an applied potential difference of 115v. by what percentage will the power drop if the applied potential difference is reduced to 100v?
We change [V 1] to 115 V, [V 2] to 110 V, and [P 1] to 500 W in the equation above. As a result, the output power will decline by 8.5%, which will also result in an 8.5% fall in heating output.
How much heat is produced by 500W?A low-wattage 500W heater can effectively heat places up to 57 square feet and offers a heating output of 1706 BTU. The smallest 200W heater, which can heat places up to 23 square feet, has a heating output of 682 BTU.
How much energy does an electric heater use?Since they convert all of the electricity they consume into heat, electric heaters are all believed to be 100% efficient, but this does not imply that their operating costs are low.
To know more about potential difference visit:-
https://brainly.com/question/12198573
#SPJ4
T/F observations in the x-ray portion of the spectrum are routinely done from the surface of the earth.
Observations in the X-ray portion of the spectrum are routinely done from the surface of the Earth is a false statement .
The electromagnetic spectrum's infrared region is where the earth emits the most energy. When the energy from the sun reaches the surface of the Earth, 49.4% of it is infrared radiation, 42.3% of it is visible light, and 8.3% of it is ultraviolet radiation.After being received from the sun, energy is reflected back into the atmosphere ( in the form of light ). The energy radiated by the Earth is significantly weaker than the Sun because it is much cooler. As a result, it emits infrared radiation ( long wavelength )As a result, the planet emits the most energy in the infrared region of the electromagnetic spectrum is correct statement .
To know more about X-ray portion
https://brainly.com/question/20432333
#SPJ4
a force of 40Nis applied at the end of a wire 4m long and produces an extension of 0.24mm. if the diameter of the wire is 2.0mm. calculate the stress and strain of the wire
Answer:
stress = 13000000 N/m or Pa
Strain = 6x10^-5
Explanation:
Radius - d/2
Radius = 2 /2
Radius = 1 mm
Stress = F/A
stress = F / (πr^2)
Stress = 40 / (π(1 / 1000)^2)
Stress = 12732395 ≈ 13000000 N/m or Pa
Strain = Extension / Original length
Strain = (0.24 / 1000) / 4
Strain = 6x10^-5
I hope my answer helps you.
two people are pulling on the ends of a rope. each person pulls with a force of 100 n. the tension in the rop is:
Option C 100 N is correct. Given that no element of the system is in motion, a person pulling with 100 N of force at either end of the rope is met with a 100 N tension in the rope.
Because the rope is subjected to the same pulling force on both sides, it is in a state of static equilibrium (i.e. it is at rest consequently has a net force of zero). Tension on a rope will be zero if it is pulled from its ends by two opposing forces of 100N each since both forces have identical magnitude but operate in different directions on the same body and cancel each other out.
The complete question is- Two people are pulling on the ends of a rope. Each person pulls with a force of 100 N. The tension in the rope is:
A 0 N
B 50 N
C 100 N
D 141 N
E 200 N
Learn more about force here-
https://brainly.com/question/13191643
#SPJ4
Which of the following actions, if done independently; would increase the maximum height reached by the ball?
a. reducing the spring constant k
b. increasing the spring constant k
c. decreasing the distante the spring is compressed
d. increasing the distance the spring is compressed
e. decreasing the mass of the ball
Increasing the spring constant k, increasing the distance the spring is compressed, decreasing the mass of the ball will increase the maximum height reached by the ball.
What is meant by maximum height reached by the object?
An object thrown vertically up will rise to its maximum height in direct proportion to its initial velocity, u.
First, as compression distance and spring constant k are raised while mass is decreased, maximum height will increase. As a result, we can select the best course of action by first raising the spring constant. Next, we have the option of extending the distance. Lastly, the spring is compressed, reducing the ball's bulk.
To learn more about the maximum height of the object from the given link
https://brainly.com/question/13665920
#SPJ1
What are the benefits of wind and solar?
As they lessen reliance on combustion-based electricity generation, wind and solar energy boost air quality, public health, and greenhouse gas emissions.
What are three advantages of solar energy?Solar energy has advantages as a renewable energy source. The fact that solar energy is a completely renewable energy source is the most significant of all the advantages of solar panels. Reduces electricity costs and has many uses. Costs of maintenance are low.
What advantages do solar panels offer?A clean, emission-free, and sustainable energy source is home solar power. Home solar energy, as opposed to fossil fuels like coal and natural gas, doesn't emit hazardous pollutants or greenhouse gases like carbon dioxide into the air and water supplies.
To know more about benefits of wind and solar visit :-
https://brainly.com/question/29234403
#SPJ4
How many Scope 3 categories are there?
The majority of an organization's overall greenhouse gas (GHG) emissions frequently come from scope 3 emissions, also known as value chain emissions. Scope 3 emissions are divided into 15 categories by the GHG Protocol.
A Scope 3 analysis is what is it?Greenhouse gas emissions from a corporation that it directly manages. indirect greenhouse gas emissions caused by the electricity or other energy a corporation utilizes. indirect greenhouse gas emissions of a firm that are not covered by Scope 2.
What makes Scope 3 crucial?In many industries (and more than 90% in many global corporations, according to CDP reporting), scope 3 emissions, also known as "Value Chain emissions," make up the bulk of total emissions. These emissions are regarded as essential to combating climate change.
To know more about scope 3 emissions visit:-
https://brainly.com/question/29546969
#SPJ4
When it comes to travel documents in an electronic travel system what is the status of an ao.
An AO is an Authorization Order, which is a document that is used to authorize a traveler to travel. It is typically issued by the travel agency or airline and is used to confirm the traveler's identity and travel plans.
help me plsplsplsplsplsplsplspls
Answer:2.15 (rounded to 2 decimal place)
Explanation:Mass = 28g
Volume =?
Density = 13 g/ml
Volume = Mass/Density
Volume = 28/13
volume= 2.15384615
When an object of ma m1 i hung on a vertical pring and et into vertical imple harmonic motion, it
ocillate at a frequency of 12. 0 Hz. When another object of ma m2 i hung on the pring along with the
firt object, the frequency of the motion i 4. 00 Hz. Find the ratio m2 /m1 of the mae
The ratio of the mass of the objects which are hung in the vertical spring is 9
The frequency of the spring with mass m₁ = 12 Hz
The frequency of the spring with the mass m₂ = 4 Hz
The ratio of the mass can be found using the formula,
[tex]\displaystyle f = \frac{1}{2 \pi} \sqrt{\frac{k}{m} }[/tex]
where f is the frequency of the spring
k is the spring constant
m is the mass
Then, the ratio of masses is
m₂ / m₁ = f₁² / f₂²
Let us substitute the known values in the above equation, we get
m₂/m₁ = 12² / 4²
= 144 / 16
= 9
Therefore, the ratio of mass is 9
Learn more about the frequency in
https://brainly.com/question/30031128
#SPJ4
What happens when the magnet moves toward the loop?
An electric current flows through a loop of wire when you move a bar magnet toward it! Faraday's law, which describes this physical process, is the foundation of electric generators. One of the pillars of electromagnetic is the Faraday law.
What occurs when you get the magnet nearer to the loop?The flux increases quickly as the magnet approaches the coil and eventually reaches the magnet inside the coil. Magnetic flux begins to decrease through the coil as it moves through it.
What occurs when the magnet's north pole moves in the direction of the loop?Since the intensity of the field lines directing from the front to the back of the loop are becoming stronger as the magnet's north pole approaches the loop, the flux through the loop caused by the magnet's field increases.
To know more about magnet visit:-
https://brainly.com/question/2841288
#SPJ4
Is gravitational potential energy a renewable or non-renewable?
Answer:
It is renewable.
Explanation:
The gravity of the earth is infinite and so it is renewable energy.
Gravitational potential energy is neither renewable nor non-renewable as it is a form of energy that exists due to the position of an object in a gravitational field. It is a type of potential energy that is associated with an object's position in a gravitational field and its mass. The amount of gravitational potential energy an object has depends on its mass, height above the reference level, and the strength of the gravitational field.
What is renewable or non renewable energy ?Renewable and non-renewable energy sources refer to the sources of energy that are used to generate electricity or power and are consumed over time. Examples of renewable energy sources include solar, wind, and hydropower, while non-renewable energy sources include fossil fuels such as coal, oil, and natural gas.
Therefore, gravitational potential energy is not considered a renewable or non-renewable energy source as it is not a source of energy that is harvested or consumed. Rather, it is a property of an object that can be converted into other forms of energy such as kinetic energy when the object falls or is released from its position in a gravitational field.
To know more about Energy ;
https://brainly.com/question/1932868
#SPJ2.
The velocity of a body change from vi to 30m/in 20econd if the rate of change of velocity i 4m/2 find vi
The velocity of a body change from vi to 30m/s in 20econd if the rate of change of velocity is 4m/s, initial velocity is -50 m/s.
To find the initial velocity, vi, of a body that undergoes a change in velocity, you can use the formula:
vi = vf - at
where vi is the initial velocity, vf is the final velocity, a is the acceleration (rate of change of velocity), and t is the time over which the acceleration occurs.
In this case, you are given that the final velocity is 30 m/s, the acceleration is 4 m/s^2, and the time is 20 seconds. Plugging these values into the formula gives:
vi = 30 m/s - 4 m/s^2 * 20 s
vi = 30 m/s - 80 m/s
vi = -50 m/s
Therefore, the initial velocity of the body is -50 m/s.
To know more about velocity
https://brainly.com/question/28738284
#SPJ4
Q4. State the energy transformations in the following cases.
a) electric iron __________ to __________
b) in lighting a candle ________ to _______
c) battery ___________ to ____________
d) boiling water on a gas hob _____ to ____
What is the name of the electrical component used to measure the current in a circuit?
Ammeter is the name of the electrical component used to measure the current in a circuit.
What is ammeter?An instrument used to measure the current in a circuit is called an ammeter, which is short for ampere meter. Amperes (A) are units used to measure electric currents. The circuit in which the current is to be measured and the ammeter are linked in series to allow for direct measurement. A typical ammeter has a low resistance so that it won't significantly lower the voltage in the circuit being measured.Microammeters and milliammeters are terms used to describe devices that measure currents in the milliampere or microampere range. The Earth's magnetic field was necessary for the operation of the earliest ammeters, which were laboratory instruments. Improved instruments were created by the late 19th century that could be put in any orientation and permitted precise measurements in electric power systems. It is generally represented by letter 'A' in a circuit.For more information on ammeter kindly visit to
https://brainly.com/question/22787866
#SPJ4
Mr. Chang's class participated in a science experiment where they placed three substances outside in the sunlight to determine which substance would increase in temperature more quickly. How would the motion of the particles of each substance be described if they are allowed to sit in the sun for a duration of 10 minutes?.
In order to find out which substance would raise in temperature most quickly, Mr. Chang's class conducted a scientific experiment outside in the sunlight using three different substances.
If particles of each substance were permitted to sit in the sun for 10 minutes, how would their motion be described? B. Physical alterations are non-chemical changes that are made to an item or substance. They alter an object's physical characteristics, such as its size, color, texture, volume, or density. To find out more about the science underlying the treat or to find some more at-home experiments, see the resources listed below. Just keep in mind that science is best when it is shared, so tell your friends about your experiment.
To learn more about temperature please click on below link
https://brainly.com/question/11464844
#SPJ4