Answer:
30m³
Explanation:
Calculation for the volume the balloon would have
First step is to calculate the Constant
Constant=30pka*5m³
Constant=150m³
Now let calculate the Volume using this formula
Balloon Volume=Constant/ Pressure
Let plug in the formula
Balloon Volume=150m³/5kpa
Balloon Volume=30m³
Therefore the volume that the balloon would have when the pressure inside the ballon has fallen to 5kpa is 30m³
From what Tim explains in the movie, what can you infer about the temperature inside a refrigerator?
Answer:
It's closest to 3 degrees celsius
Explanation:
An object moving at a constant velocity accelerates at a constant rate of 2.5 m/s2 for a distance of 30 m. At the end of the acceleration the object has a velocity of 90 m/s. What was its velocity before accelerating?
Answer:
The initial velocity is 89.16m/s
Attached is the solution
Explanation:
A person runs 15.0 km north then turns around and runs 10.0 Km south. what is his dstance
Answer:
25km
Explanation:
The person runs 15km Northward
Turns around and runs 10km southward
The distance is the length of path covered by the person running.
This is given as:
Distance = Distance North + Distance South
Distance = 15km + 10km = 25km
Answer:
25km
Explanation:
cant explain but ik
A car starts from rest and accelerates at a constant rate of 3.5 m/s2. What is the car’s velocity after the car has traveled 800 m?
Answer:
Attached is the answer
Explanation:
The car’s velocity after the car has traveled 800 m is 74.83 m/sec.
What is velocity?When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time.
Using equation of motion, initial velocity u = 0 and acceleration a = 3.5 unit and distance travelled is 800 m.
v² = u² + 2as
v² = 0 + 2*3.5*800
v² = 5600
v = 74.83 m/sec
The car’s velocity after the car has traveled 800 m is 74.83 m/sec.
To learn more about velocity refer to the link
brainly.com/question/18084516
#SPJ2
What could you do to find the density of a fork, knife, and a spoon?
Answer:
Density is equal to mass divided by volume.
Explanation:
Density = mass / volume
or
p=m/v
Answer:
Use the formula D=m/v
Explanation: In order to find the volume for these objects, use a ruler and measure the length, width, and height. Proceed to multiply them all together, L*W*H. To find the mass of an object, I would say to use a triple beam balance. After finding both the mass and volume of you object, use the formula D = m/v and you'll get your answer.
If the base runner leaves the base before the ball is caught in the outfield, what should the defence do?
Answer:
Well it depends
Explanation:
If the runner leaves the base before
the ball is caught the defence cannot do anything exept
catch the ball if they catch the ball while he is still running he has to get back to the base before they could tag him or the base if they tag him or the base before he can get back to his base he is out if they did not catch the ball the runner can run as long as he wants just cant get taged the defence has to get the ball in as fast as possible to get the runner out.
According to Einstein's famous formula, the relationship between mass and energy can be written E = M ∙ c2, where E = energy in joules, m = mass in kilograms and c = speed of light in meters per second. Sweden's annual energy use amounts to approximately 1.35 ∙ 10 up tp 18J. Suppose that all this energy could be created by converting matter into energy. If so, how much mass would be needed to cover the country's annual energy use?
The speed of light is 3 ∙ 10 up to 8 m / s
Answer:
the amount of mass needed is: 4.5 10^9 kg
Explanation:
Use the given equation:
E = m * c^2
with E = 1.35 * 10^(18) J
and c = 3 * 10^8 m/s
and solve for the mass as shown below:
m = 1.35 * 10^(18) / 3 * 10^8 ≈ 4.5 10^9 kg
Microwaves are sent through a material causing the molecules in the material to twist and vibrate, causing the material to heat up. What is this twisting and vibration of the molecules creating heat an example of?(1 point)
a macroscopic change creating a macroscopic output
a microscopic change creating a macroscopic output
a macroscopic change creating a microscopic output
a microscopic change creating a microscopic output
Answer: The answer is C
Explanation:
Can someone help? Please?
Answer:
A. Speed
Explanation:
Speed is the magnitude of velocity, which is given in the question. Velocity is a vector quantity and therefore has both a magnitude and a direction. Only the former is implied in the question.
A force is exerted on a box an an equal and opposite force is exerted by the box. what explains this?
Answer: What is the force that opposes motion between two surfaces in contact with each ... How is the relationship among mass, force and acceleration explained? ... When a force is exerted on a box, an equal and opposite force is exerted by the box.
A 30 kg dog runs at a speed of 15
What is the dog's kinetic energy?
Someone pls help me with this!
Answer:
F=8.87 N
Explanation:
Coulomb's Law
The electrostatic force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.
Written as a formula:
[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]
Where:
[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]
q1, q2 = the objects' charge in coulomb
d= The distance between the objects in meters
Object 1 has a charge of
[tex]q_1=-2.3\cdot 10^{-6}\ c[/tex]
Object 2 has a charge of
[tex]q_2=-4.2\cdot 10^{-6}\ c[/tex]
They are separated by a distance of
d = 0.099 m
Calculate the force:
[tex]\displaystyle F=9\cdot 10^9\frac{2.3\cdot 10^{-6}*4.2\cdot 10^{-6}}{0.099^2}[/tex]
F=8.87 N
Please help me this is worth allot
A device that makes energy easier is a machine. true or false
Answer:
trueeeeeeeeeeeeeeeeee
it serves as the fuctional unit of the nervous system
Answer:
i would say the neuron
dew forms when humid air cools overnight. if the temperature falls below freezing, blank will form instead
which wave carries the highest energy?
Answer:
Gamma rays
Explanation:
Please help i don't get it.
Which image matches the Topographic Map Shown?
Also, please explain how your answer is the correct answer. Why is your answer correct?
Answer:
the answer is 4
Explanation:
the picture matches eachother that's why I picked 4
Answer:
devils tower
Explanation:
on the topographic map the circular lines stop at at certain point because the moutain doesnt get any pointyer if you know what that means
in other words if the map continued with the circular lines all the way to the centerit would have been that snowny mountain
A 5.0\, \text {kg}5.0kg5, point, 0, start text, k, g, end text box is at rest on a table. The static friction coefficient \mu_sμ
s
mu, start subscript, s, end subscript between the box and table is 0.500.500, point, 50, and the kinetic friction coefficient \mu_kμ
k
mu, start subscript, k, end subscript is 0.300.300, point, 30. Then, a 20\,\text N20N20, start text, N, end text horizontal force is applied to the box.
What is the best estimate of the magnitude of the box’s acceleration?
Answer:
25 N
Explanation:
When a force is applied to an object, for it to move it has to overcome the frictional force. The frictional force is perpendicular to the surface on which it acts. For an object at rest, it is acted upon by static friction, this friction must be overcome before the object can move, while a moving object is resisted by kinetic friction that prevents it from moving.
Since the box is at rest, it is acted upon by a static friction.
mass = 5 kg, acceleration due to gravity = 10 m/s², static friction coefficient = 0.5
Weight of the box = mass * acceleration due to gravity = 5 * 10 = 50 N
The applied horizontal force (F) is:
[tex]F=\mu_s*weight=0.5*50\\\\F=25\ N[/tex]
Answer:
0 m/s^2
Explanation:
khan academy
What distance is required for a train
to stop if its intial Velocity is 23 m/s
and its deceleration is 0.25m/s (Assume the train decelerates at a constant rate.)
Explanation:
what is time in this question
PLZ PLZ PLZ PLZ PLZ PLZ PLZ HELPPPPPPPPPPPPPPPPP
Answer:
endoplasmic reticulum
4- Protein foods?? pls answer these i really need these
The #1 answer would be meats and eggs. But, as a veggan, I present you with meatless protien-rich food!
1 - Pea protein (used in Beyond Meat, which tastes just like meat btw!)
2 - Soy protein such as tofu
3 - Nuts
4 - Beans! oml so many beans have MORE protien than meat!! ikr!?!?
may I have Brainliest pls =)
Compare between Convex lens and concave lens
Answer:
A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses.
a b c or d for not heat
Answer:
a
Explanation:
How many protons will every atom of Carbon (C) have?
14
12
13
6
Answer:
6 protons
Explanation:
The following number - 0.050437 - written to TWO significant figures would be
Answer:
0.050000
Explanation:
your welcome :)
What part of a motor causes its electromagnet to turn in the same direction
consistently, transforming electrical energy into mechanical energy?
A. Commutator
B. Loop of wire
C. Permanent magnets
D. Battery
PLS HELP
Answer:
A. Commutator
Explanation:
Commutator is part of a motor causes its electromagnet to turn in the same direction consistently, transforming electrical energy into mechanical energy.
What is energy?Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.
A commutator is a rotary electrical switch in certain types of electric motors and electrical generators.
Commutator is part of a motor causes its electromagnet to turn in the same direction consistently, transforming electrical energy into mechanical energy.
To learn more about energy refer to the link:
brainly.com/question/1932868
#SPJ5
Following through when hitting a baseball
A cell of e.m.f 1.5 v and internal resistance 2.5 ohm is connected in series with an ammeter of resistance 0.5 ohm and a resistor of resistance 7.0 ohm. Calculate the current in the circuit.
Answer:
The current in the circuit is 0.15 Ampere
Explanation:
The given parameters of the cell are;
The electromotive force (e.m.f.) of the cell, E = 1.5 V
The resistance of the cell, r = 2.5 ohm
The resistance of the ammeter = 0.5 ohm
The resistance of the resistor = 7.0 ohm
The formula for the e.m.f., E of a cell is given as follows;
e.m.f. E = I·(R + r)
Where;
I = The current in the circuit
R = The sum of the resistances in the circuit = 7.0 Ω + 0.5 Ω + 2.5 Ω = 10 Ω
Therefore, we have;
[tex]The \ current \ in \ the \ circuit, \ I = \dfrac{E}{R + r}[/tex]
Substituting the known values, gives;
[tex]I = \dfrac{1.5 \ V}{7 \ \Omega + 0.5 \ \Omega + 2.5 \ \Omega} = \dfrac{1.5 \ V}{10 \ \Omega} = 0.15 \ A[/tex]
The current in the circuit, I = 0.15 Ampere.
An empty airplane with a mass of 200,000 kg must have a speed of 82 m/s to achieve takeoff. Once it is fully loaded, the airplane has a mass of 350,000 kg. It has 3200 m of runway. a) How much force is needed to get the full airplane safely in the air?
b) How much runway would the empty airplane use if its engines generated the same force?
Answer:
a) A force of 367718.75 newtons is needed to get the full airplane safely in the air.
b) The empty airplane would need a runway of 1828.571 meters.
Explanation:
a) This problem can be solved by using the Work-Energy Theorem, which states that work needed by the airplane to get minimum speed is equal to its change in translational kinetic energy, both measured in joules. The resulting formula is presented below:
[tex]F\cdot \Delta s = \frac{1}{2}\cdot m \cdot (v_{f}^{2}-v_{o}^{2})[/tex] (1)
Where:
[tex]F[/tex] - Minimum net force, measured in newtons.
[tex]\Delta s[/tex] - Runway length, measured in meters.
[tex]m[/tex] - Mass of the airplane, measured in kilograms.
[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds of the airplane, measured in meters per second.
If we know that [tex]m = 350000\,kg[/tex], [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 82\,\frac{m}{s}[/tex] and [tex]\Delta s = 3200\,m[/tex], then the minimum net force needed by the airplane to get itself safely in the air:
[tex]F = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot \Delta s}[/tex]
[tex]F = \frac{(350000\,kg)\cdot \left[\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (3200\,m)}[/tex]
[tex]F = 367718.75\,N[/tex]
A force of 367718.75 newtons is needed to get the full airplane safely in the air.
b) If we know that [tex]m = 200000\,kg[/tex], [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 82\,\frac{m}{s}[/tex] and [tex]F = 367718.75\,N[/tex], then the length of the runway is:
[tex]\Delta s = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot F}[/tex]
[tex]\Delta s = \frac{(200000\,kg)\cdot \left[\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (367718.75\,N)}[/tex]
[tex]\Delta s = 1828.571\,m[/tex]
The empty airplane would need a runway of 1828.571 meters.