HELP ASAP!!! PLEASE!!

Answer:

Revolutions

Explanation:

Answer:

12 N/cm²

Explanation:

From the question given above, the following data were obtained:

Weight (W) of block = 240 N

Area (A) = 20 cm²

Pressure (P) =?

Next, we shall determine the force exerted by the block. This can be obtained as follow:

Weight (W) of block = 240 N

Force (F) =.?

Weight and force has the same unit of measurement. Thus, we force applied is equivalent to the weight of the block. Thus,

Force (F) = Weight (W) of block = 240 N

Force (F) = 240 N

Finally, we shall determine the pressure on the floor as follow:

Force (F) = 240 N

Area (A) = 20 cm²

Pressure (P) =?

P = F/A

P = 240 / 20

P = 12 N/cm²

Therefore, the pressure on the floor is 12 N/cm².

Answer:

The law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction. For example, when wood burns, the mass of the soot, ashes, and gases, equals the original mass of the charcoal and the oxygen when it first reacted. So the mass of the product equals the mass of the reactant

Answer:

0.4

Explanation:

Given that a particular inductor is connected to a circuit where it experiences a change in current of 0.8 amps every 0.10 sec. If the inductor has a self-inductance of 2.0 V, what is the inductance

Using the power formula

P = IV

Substitute all the parameters

P = 0.8 × 2

P = 1.6 W

But P = I^2 R

Substitute power and current

1.6 = 0.8^2 R

R = 1.6 / 0.64

R = 2.5 ohms

Inductance = reciprocal of resistance

Inductance = 1 / 2.5

Inductance = 0.4

Answer:

B

Explanation:

But molecules at a higher temperature have more energy.

Answer: B. Raising the temperature of the air

Answer:

45kw45_32+675&453try to get it done

Answer:

A: 9 kg

Explanation:

on edge! hope this helps!!~ ∩(︶▽︶)∩

Answer:

the nuclear fusion process

Explanation:

:)

Answer:

nuclear fusion (not fission)

Explanation:

a p e x :))

Answer:

a) The diagrams can be seen in the picture attached

(b) By comparing the diagrams we can conclude that the resultant R₁ = R₂ = R₃

Further explanation

Vector is quantity that has magnitude and direction.

One example of a vector is acceleration.

Acceleration is rate of change of velocity.

a = acceleration ( m/s² )

v = final velocity ( m/s )

u = initial velocity ( m/s )

t = time taken ( s )

d = distance ( m )

Let us now tackle the problem !

This problem is about Vector and Vector Diagram.

Given:

Vector A = -200 j

Vector B = -250 i

Vector C = (150 sin 30.0°) i + (150 cos 30.0°) j = 75 i + 75√3 j

Unknown:

R₁ = A + B + C = ?

R₂ = B + C + A = ?

R₃ = C + B + A = ?

Solution:

R₁ = A + B + C  = (-200 j) + (-250 i) + (75 i + 75√3 j)

R₁ = -175i + (75√3 - 200)j

R₂ = B + C + A = (-250 i) + (75 i + 75√3 j) + (-200 j)

R₂ = -175i + (75√3 - 200)j

R₃ = C + B + A  = (75 i + 75√3 j) + (-250 i) + (-200 j)

R₃ = -175i + (75√3 - 200)j

From the results above, it can be concluded that the resultants above produce the same results. This can be confirmed from the diagrams in the attachment.

Explanation:

Answer:189000J

Explanation:KE=1/2mv^2

1/2(420g)(30m/s)^2

=189000J

Answer:

I think the answer is A. Slow down

Explanation:

Answer:

The time it will take the mega-ray blaster to hit the ground is 2.57 s.

Explanation:

Given;

initial velocity of Optimus Prime, u = 24 m/s

height of fall of the mega-ray blaster, h = 94 m

The time of fall of the mega-ray blaster is calculated using the following kinematic equation;

[tex]h = ut + \frac{1}{2}gt^2\\\\94 = 24t + \frac{1}{2}(9.8)t^2\\\\94 = 24t + 4.9t^2\\\\4.9t^2 +24t -94 = 0\\\\Use \ formula \ method \ to \ solve \ for \ "t"\\\\a = 4.9 , b = 24, c = -94\\\\t = \frac{-b \ +/- \ \sqrt{b^2 -4ac} }{2a} \\\\t = \frac{-24 \ +/- \ \sqrt{(24)^2 -4(-94 \times4.9)} }{2(4.9)} \\\\t = \frac{-24 \ +/- \ \sqrt{2418.4} }{9.8}\\\\t = \frac{-24 \ +/- \ 49.177 }{9.8}\\\\t = \frac{-24 \ +\ 49.177 }{9.8} \ \ or \ \ t = \frac{-24 \ -\ 49.177 }{9.8} \\\\[/tex]

[tex]t = 2.57 \ s \ \ or \ \ t = -7.47 \ s[/tex]

t = 2.57 s

Therefore, the time it will take the mega-ray blaster to hit the ground is 2.57 s.

Answer: 432m

Explanation:

Convert 3 min to seconds

1 min = 60 sec

3 min = 180 sec

Multiply the speed times time to get distance.

2.4 x 180 = 432m

Answer:

h = 9.83 cm

Explanation:

Let's analyze this interesting exercise a bit, let's start by comparing the density of the ball with that of water

let's reduce the magnitudes to the SI system

         r = 10 cm = 0.10 m

         m = 10 g = 0.010 kg

         A = 100 cm² = 0.01 m²

the definition of density is

          ρ = m / V

the volume of a sphere

         V = [tex]\frac{4}{3} \ \pi r^{3}[/tex]

          V = [tex]\frac{4}{3}[/tex] π 0.1³

          V = 4.189 10⁻³ m³

let's calculate the density of the ball

           ρ = [tex]\frac{0.010}{4.189 \ 10^{-3} }[/tex]

           ρ = 2.387 kg / m³

the tabulated density of water is

         ρ_water = 997 kg / m³

we can see that the density of the body is less than the density of water. Consequently the body floats in the water, therefore the water level that rises corresponds to the submerged part of the body. Let's write the equilibrium equation

            B - W = 0

            B = W

where B is the thrust that is given by Archimedes' principle

           ρ_liquid  g V_submerged = m g

           V_submerged = m / ρ_liquid

we calculate

            V _submerged = 0.10 9.8 / 997

             V_submerged = 9.83 10⁻⁴ m³

The volume increassed of the water container

           V = A h

            h = V / A

let's calculate

            h = 9.83 10⁻⁴ / 0.01

            h = 0.0983  m

this is equal to h = 9.83 cm

Answer:

Explanation:

B

Answer:

No, it would not still be water. it would be hydrogen peroxide

Explanation:

water is [tex]H_{2} O[/tex]. Adding another oxygen would make it [tex]H_{2} O_{2}[/tex], which is hydrogen peroxide

Answer:

It would be Hydrogen peroxide

Explanation:

Atoms actually prefer being configured as water (H2O). Adding on the extra oxygen takes a lot of energy (and other chemicals). That's why we see lots of water and not much hydrogen peroxide around in nature. The reason hydrogen peroxide (H2O2) is dangerous is because it actually wants to drop off that extra oxygen and become water. Anything that does this is called an oxidising agent. An oxygen atom on it's own is pretty unstable and really wants to snatch up electrons from somewhere. First it'll probably gobble up some free floating hydrogen and make some more water with it. In our bodies we don't have much free floating hydrogen, so it runs out pretty quick. The oxygen atom army then has to start breaking up bigger molecules to steal the hydrogens and sometimes even the nitrogens. This breaks up the molecules that form the structures of your body and leaves you with a jumble of random configurations of atoms where the oxygen atoms passed through. Now, before you ask, normally oxygen doesn't do it to you because it exists in the air as O2, bonded to itself. The isolated oxygen atoms only exist for a brief time after they've split up from the hydrogen peroxide.

Answer:

one could freeze and the second would thaw

Explanation:

sorry if its wrong

The two examples of how land can have a dramatic change in temperature

is during freezing and thawing.

Cold temperatures which is common during the winter period is

characterized by the formation of snow and freezing of smaller water

bodies.

There may be a short phase in which there is relative sunlight which melts

the frozen substances thereby forming liquids . This is usually as result of

the temperature being on the increase in the atmosphere.

Read more on https://brainly.com/question/25671319

Answer:

the molecules will begin to move slowly and will turn to ice

Explanation:

hope this was good or not not sure if am right but yeah

Explanation:

Such spheres are intimately connected. Many animals (biosphere), for example, migrate through to the sky, while groundwater (hydrosphere) also flows through the ground (lithosphere). The domains are actually so closely related that a shift in one globe always results in a shift in one or both of some other spheres.

Answer:

pratyush the first boy984

Answer:

Gravity

because it's factorised by mass of a body.

For other forces, they deal with charges of negligible mass and weights

Answer:

Gravity

Explanation:

question: is this actually hypothetical?

Explanation:

also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .

Answer:

the same thing the last guy said

Answer:

2.9m/s and 140N

Explanation:

For speed convert rev/s to m/s

(Rev/8s)=(2π/8)(5m) = 3.9m/s

For Centripetal Force

Fc = (ac)(m) = (v^2/r)(m) = [(3.9m/s)^2/(5.0m)][45kg] = 140N

Answers go to two significant figures.

Answer:

A High-to-Low

Explanation:

its like water running down a hill.

Answer:

d = 113.6 m

Explanation:

For this exercise, the first thing we must notice is that the speed of the laser beam in the fiber is constant, so we can use the uniform motion relationships to find the necessary distance

          v = d / t

let's reduce to SI units

         t = 557 ns = 557 10⁻⁹ s

         d = v t

         d = 2.04 10⁸ 557 10⁻⁹

         d = 1.136 102 m

         d = 113.6 m

This is the distance of the fiber for the laser to arrive with the desired delay

Answer: 6

Explanation:

Of those 25 elements found in living things, 6 of them can be found in all of them. These 6 are very integral to life as when they combine, they make up cells, tissues and other body components.

These elements are: Carbon, Oxygen, Nitrogen, Hydrogen, Phosphorus and Sulfur. Their combinations can either create organic or inorganic compounds.

Answer:

19

Explanation:

i got 19... not sure if 6 is correct

Answer:

4

Explanation:

because people could lie about it

Answer:

[tex]a=12.97\ m/s^2[/tex]

Explanation:

Given that,

The length of a string, l = 0.87 m

Speed of the ball, v = 3.36 m/s

We need to find the acceleration of the ball. The acceleration acting on the ball is centripetal acceleration. It is given by :

[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{(3.36)^2}{0.87}\\\\=12.97\ m/s^2[/tex]

So, the acceleration of the ball is [tex]12.97\ m/s^2[/tex].