HELP!!!!
four different liquid compounds in flasks at 20 C are represented above. the table below identifies the compounds. flask c shows the most particles in the vapor phase. which of the following is not shown in the model but best helps to explain why flask c must contain pentane
Answers
Answer: C , The strength of the intermolecular forces between the particles in the liquids.
Explanation:
Since we have 4 boiling flasks with liquids that are at a temp of 20⁰C and out of them all, flask C the has most amount of vapour Particles inside of it, because of that we can conclude that it has the weakest Intermolecular force out of the rest of the boiling flasks since at a temp of 20⁰C it has the most amount of gas particles compared with the other flasks, and not to forget the data in the graph shows us the formula and boiling point of flask C that contains pentane and from that data given we can tell that since the boiling point of pentane Is low then it has to have a weak intermolecular forces, causing it to have more vapour Particles than other flasks, proving the answer to be C since showing the strength of the attraction will explain everything we need to know about flask C and why does it have more vapour Particles than the other flasks.
Note:
(A) is not the answer since all the liquid particles in each flask are in random constant motion at a temp of 20⁰C so it does not justify why flask C has more vapour Particles.
(B) is not the answer since showing the relative speeds of each vapour Particle will not justify why flask C has the most amount of gas particles with the respect of its temperature.
(D) is not the correct answer since we already have data given in the graph about the boiling point of pentane and it's formula so showing the particulate representation is useless.
The best explanation is the strength of intermolecular force between the particles in a liquid. Thus option C is correct.
What is intermolecular force?Intermolecular force is defined as the attractive and repulsive force that rises between the molecules of a compound. They are electrostatic in nature.
There are basically five type of intermolecular force.
Dipole-Dipole interactionIon Dipole interactionIon induced dipole interactionDipole induced dipole interactionDispersion forceThe first three forces are collectively known as Vander wall force.
Thus, the best explanation is the strength of intermolecular force between the particles in a liquid. Thus option C is correct.
To learn more about intermolecular force, refer to the link below:
https://brainly.com/question/9328418
#SPJ2
Related Questions
Study the chemical equation.
Na + Cl2 → NaCl
Is the chemical equation properly balanced?
Answers
A student electrolysed some water. She collected 20 cm of oxygen, What volume of hydrogen could she also
have collected at the same time?
Answers
According to the chemical formula of water the volume of hydrogen collected on electrolysis of water will be double of water thus volume of hydrogen is 40 cm.
What is chemical formula?Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ1
b) Explain how a burette and a conical flask should be rinsed before a titration experiment?
Answers
[tex] \large \text{Answer} \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ \\ [/tex]
If you rinse the burette with the solution to be used, then any tiny amounts of liquid remaining are the same as the solution used to fill the burette, so they will not change the concentration of the solution in any way. This is to prevent contamination.
~⭐Hope it helps you ⭐~
the electron pair geometry around the central iodine in I3- is
Answers
The electron pair geometry around the central iodine in I3- is trigonal bipyramidal.
The shapes of molecules is determined by the Valence Shell Electron Pair Repulsion theory (VSEPR). According to this theory, The shape of a molecule depends on the number of electron pairs that surround the valence shell of the central atom in the molecule.
In the structure I3-, the iodine is sp3d hybridized and has a bond angle of 180°. There are three iodine atoms. The central iodine atom is surrounded by two bond pairs and three lone pairs. The electron pair geometry around the central iodine in I3- is trigonal bipyramidal.
Learn more: https://brainly.com/question/8646601
Why does sugar taste sweet
PLEASE EXPLAIN
Answers
Answer:
Because i comes from cane.
what scientist is credited with formulating the octet rule
Answers
Answer:
The electron configuration of the neon atom. American chemist Gilbert Lewis (1875-1946) used this observation to explain the types of ions and molecules that are formed by other elements. He called his explanation the octet rule.
1. Which of these is an agent of chemical weathering?
copper patina
iron oxide
acid rain
iron
Answers
Answer:
Test answers
1. Water carving out a limestone cave
2. Oxidation
3. Acid rain
(Got 100%)
Explanation:
The primary agents of chemical weathering are water, oxygen and acids. So acid rain is an agent of chemical weathering. Option C is correct.
Which are the agents of chemical weathering ?Water, and many chemical compounds found in water, is the main agent of chemical weathering. One of the most abundant rock-forming minerals, chemically reacts with water and water-soluble compounds to form clay.
Water contains many weak acids such as carbonic acid. The primary agents of chemical weathering are water, oxygen and acids.
These react with surface rocks to form new minerals that are stable in, or in equilibrium with, the physical and chemical conditions present at the earth's surface.
Hence, option C is correct.
To learn more about chemical weathering follow the link below;
https://brainly.com/question/14426457
#SPJ2
2. Some water returns to the air from lakes and the oceans. This process is called: A. Evaporation B. Condensation C. Groundwater
Answers
Answer:
A. evaporation
Explanation:
Answer:
This process is called (A) evaporation.
Evaporation is the process is where water turns into a vapor or air.I hope this helped at all.
Why is lead(II) nitrate: “Pb(NO3)2” and not “Pb3NO2”?
Just a bit confused because it looks a bit funny compared to how I learned how to write compounds.
Answers
Explanation:
this is because the combining capacity, ie valency, of Pb is 2 of which NO3 is 1. So, when they will combine by cross method, the compound become Pb(NO3)2 (lead II nitrate).
hope this helps you.
Which of the following best describes the relationship between a
mutation and a resulting change in the coat color of a mouse?
Answers
Answer:
A I think
Explanation:
need help!!
Is the atomic number of an atom equal to the electrons in an atom
Answers
Answer:
YES.
Explanation:
The atomic number is the number of protons. Because the number of protons is EQUAL to the number of electrons, they're basically equal.
Calculate the energy of a photon of light emitted from a hydrogen atom when an electron falls from level n
Answers
Answer: E
1
−
E
4
=
Δ
E
=
−
2.18
×
10
−
18
J
(
1
n
2
f
−
1
n
2
i
)
=
−
2.18
×
10
−
18
J
(
1
1
2
−
1
4
2
)
=
−
2.18
×
10
−
18
J
(
15
16
)
=
−
2.04
×
10
−
18
J
After you obtain the energy, then you can realize that that energy has to correspond exactly to the energy of the photon that came in:
|
Δ
E
|
=
E
photon
=
h
ν
=
h
c
λ
where
h
is Planck's constant,
c
is the speed of light, and
λ
is the wavelength of the incoming photon. Thus, the wavelength is:
⇒
λ
=
h
c
E
photon
=
(
6.626
×
10
−
34
J
⋅
s
)
(
2.998
×
10
8
m/s
)
2.04
×
10
−
18
J
=
9.720
×
10
−
8
m
=
97.20 nm
Explanation:
help me please?????
Answers
Wines are produced from fermentation of crushed grapes. What causes the either white or red color of wine
Answers
Answer:
The cause of the color "white" in wine is because the grape's skin is removed before fermentation.
The cause of the color "red" in wine is because the grape's skin is still intact while fermentation
6. A 10.0 g sample of krypton has a temperature
of 25 °C at 575 mmHg. What is the volume, in
milliliters, of the krypton gas?
Answers
Considering the definition of ideal gas law, the volume of the Krypton gas is 3840 mL.
An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P×V = n×R×T
where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.
Now, taking into account this law, and isolating the pressure variable (P), you get:
[tex]V=\frac{nxRxT}{P}[/tex]
In this case, you know:
n= [tex]10 gramsx\frac{1 mole}{83.80 grams} =[/tex]0.119 moles, where 83.80[tex]\frac{grams}{mole}[/tex] is the molar mass of Krypton, that is, the amount of mass that a substance contains in one mole.R= 0.082 [tex]\frac{atmL}{moleK}[/tex]T= 25 C=298 kP= 575 mmHg=0.756579 atm (being 1 atm=760 mmHg)Replacing in the ideal gas law:
[tex]V=\frac{0.119 molesx0.082 \frac{atmL}{moleK}x298K}{0.756579 atm}[/tex]
Solving:
V=3.84 L= 3840 mL (being 1 L=1000 mL)
Finally, the volume of the Krypton gas is 3840 mL.
Learn more:
https://brainly.com/question/4147359?referrer=searchResults
A clasping handshake may be used as an analogy for an enzyme-catalyzed reaction because it represents the specific manner in which an enzyme ________. folds to form secondary and tertiary structures interacts with water binds substrate is denatured by low pH
Answers
A clasping handshake is similar to the way in which enzymes bind to substrates in enzyme-catalyzed reactions.
Enzymes are biological catalysts that speed up the rates of biological reactions by lowering the minimum energy required by reactants in order to arrive at products.
Enzymes are able to achieve this feat by substrate-enzyme binding. The substrate binds to the enzyme in its active site, becomes products, and the products are released from the active site of the enzyme. Thus, the enzyme is free for the binding of another substrate.
More on enzyme-catalyzed reactions can be found here: https://brainly.com/question/6658074
Rocks and fossils leave evidence of the conditions that were present when they formed.
true of false
Answers
what is the mass percent of hydrogen in water
Answers
Answer:
11.11%
Explanation:
The percentage of an element in a compound is 100 times the fraction, so for water the mass percent hydrogen is 11.11%
Hope this helps :)
Rock candy is composed of large sugar crystals, which are made of sugar molecules. Growing the crystals in water with food dyes makes colored crystals. A friend has a plan to make jewelry using rock candy and claims that the jewelry will look like and last as long as jewelry made from gemstones. Use evidence about the bonding in ionic and molecular compounds to evaluate this claim.
Answers
It is possible to form jewelry from rock candy that will look like and last as long as jewelry made from gemstones since the both materials contains a crystalline lattice.
Ionic bonding comprises of units cells of oppositely charged ions that come together to form a crystal lattice. Molecular compounds such as gemstones are also composed of unit cells which also give a well defined crystal lattice.
We must note that the strength of these materials come from the fact that all have a well defined crystal lattice in which particles are well ordered. It is possible to form jewelry from rock candy that will look like and last as long as jewelry made from gemstones since the both materials contains a crystalline lattice.
Learn more: https://brainly.com/question/7563411
6. (04.02 MC) Two chemical reactions are shown:
A. Ca(OH)2 → CaO + H2O
B. 4K + O2 → 2K2O
Which statement is true? (4 points)
A) Both are synthesis reactions.
B) Both are decomposition reactions. C) A is a synthesis reaction, and B is a decomposition reaction.
D) A is a decomposition reaction, and B is a synthesis reaction.
Answers
A. Ca(OH)₂ → CaO + H₂O is a decomposition reaction
B. 4K + O₂ → 2K₂O is a synthesis reaction.
The correct answer to the question is Option (D) A is a decomposition reaction, and B is a synthesis reaction.
A decomposition reaction is a reaction in which a large compound is broken into two or more products for example:XY —> X + YA synthesis reaction is a reaction in which two or more substances combine to produce a single product. For exampleC + D —> CDWith the above information in mind, we conclude that:
A. Ca(OH)₂ → CaO + H₂O is a decomposition reaction
B. 4K + O₂ → 2K₂O is a synthesis reaction.
The correct answer to the question is Option (D) A is a decomposition reaction, and B is a synthesis reaction.
Learn more: https://brainly.com/question/16987748
Answer:
d
Explanation:
How much heat is required for 10 g of steam specific heat
capacity = 2.01 J/gºC) at 120°C to be heated to 160°C?
Answers
Answer:
145°C is allowed
Explanation:
step step by step explanation
Question 1 (4 points)
Using the 4 pictures below, write a lab safety rule that could go with EACH of the pictures. You should have 4 rules in total (one for each picture)
Answers
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Blank # 1 - keep safe distance from the burner
Blank # 2 - Place the equipments on the right place after use
Blank # 3 - perform experiments with proper lab equipment and safety tools
Blank # 4 - Don't break any test tube or lab equipment
(maybe it can be hazardous)
Two students, Janelle and Corey, are ready to test their designs.
Janelle made her solar oven by lining a piece of poster board with aluminum foil, shaping it into a cone, and placing it over a piece of black paper in an empty box. The food will go in a plastic sandwich bag on top of the black paper in the center of the cone. The image shows Janelle's cone oven.
cone shaped solar oven
Corey made his solar oven by lining the inside of a shoe box with black paper, placing a piece of plastic wrap over the bottom of the shoe box, and lining the lid of the box with aluminum foil. He used a pencil to prop the lid open at an angle. The food will go on the black paper under the plastic wrap. The image shows Corey's shoe box oven.
shoe box solar oven
Janelle's and Corey's designs both use aluminum foil, black paper, and either a plastic bag or plastic wrap. What is the purpose of each of these materials in the designs?
Answers
Anwser
my anwser is both will absorb and the will retain
Janelle made her solar oven by lining a piece of poster board with aluminum foil, shaping it into a cone, and placing it over a piece of black paper in an empty box. The food will go in a plastic sandwich bag on top of the black paper in the center of the cone. The image shows Janelle's cone oven.
cone shaped solar oven
Corey made his solar oven by lining the inside of a shoe box with black paper, placing a piece of plastic wrap over the bottom of the shoe box, and lining the lid of the box with aluminum foil. He used a pencil to prop the lid open at an angle. The food will go on the black paper under the plastic wrap. The image shows Corey's shoe box oven.
shoe box solar oven
Janelle's and Corey's designs both use aluminum foil, black paper, and either a plastic bag or plastic wrap so that means that they both absorb and they will retain and is u ever do it do not put it under a shave
Look at the three kinds of houses shown in the simulation. Which house do you think will best resist damage from a tsunami? Which house will suffer the most damage from a tsunami? Do you think any of the houses will survive a large tsunami? Write down your predictions. https://app.edmentum.com/redirect//358692this link will help the people answer my question the link
Answers
Answer:
all the houses will be damaged
Explanation:
i voted for it
3. A baseball bat striking a baseball and sending it toward left field is an example
of energy transformation. True or false. Please help it’s due tomorrow!!!
Answers
Answer:
TRUE
Explanation:what is the mass of the ice (in kg) composing the iceberg?
Answers
Answer:
picture pls
Explanation:
Calculate the mass of iron formed when 299g of iron (ii) oxide is reduced by excess carbon monoxide
Answers
Answer:
Mass = 88.12 g
Explanation:
Given data:
Mass of iron oxide = 126 g
Mass of iron formed = ?
Solution:
Chemical equation:
Fe₂O₃ + 3CO → 2Fe + 3CO₂
Number of moles of iron oxide:
Number of moles = mass/molar mass
Number of moles = 126 g/ 159.69 g/mol
Number of moles = 0.789 mol
Now we will compare the moles of iron with iron oxide.
Fe₂O₃ : Fe
1 : 2
0.789 : 2/1×0.789 = 1.578 mol
Mass of iron:
Mass = number of moles ×molar mass
Mass = 1.578 mol × 55.84 g/mol
Mass = 88.12 g
during an earthquake, geologists use a machine called what
Answers
Answer:
sesimographs
Explanation:
Answer:
A seismometer
Explanation:
it measures seismic waves
Which of the following is an organic compound?
sulfur oxide (SO)
sodium chloride (NaCl)
water (H 2O)
carbon monoxide (CO)
Answers
Answer:
Carbon monoxide (CO)
Explanation:
Organic compounds are generally any chemical compounds that contain "carbon-hydrogen bonds". Due to carbon's ability to catenate, millions of organic compounds are known. The study of the properties, reactions, and syntheses of organic compounds comprise the discipline known as organic chemistry.
In your own words, explain in a simple and short way of what matter is, and how is it described.
Answers
Answer:
The basic thing that all things are made up of
Explanation: