help out here plzzzzzzzzzzzzz

Help Out Here Plzzzzzzzzzzzzz

Answers

Answer 1

Answer:

Chromosomes are duplicated in the "s phase" of interphase.


Related Questions

Please please help me please please

Answers

Answer: 1. A, 2.B, 3. D, 4. B, 5. C

Explanation:

i have P.E. too lol have a great day!

An electric range burner weighing 699.0 grams is turned off after reaching a temperature of 482.0°C, and is allowed to cool down to 22.7°C.

Calculate the specific heat of the burner if all the heat evolved from the burner is used to heat 560.0 grams of water from 22.7°C to 80.3°C.


J/g°C

Answers

Answer:

0.42 J/gºC

Explanation:

We'll begin by calculating the heat energy used to heat up the water. This can be obtained as follow:

Mass (M) of water = 560 g

Initial temperature (T₁) = 22.7 °C

Final temperature (T₂) = 80.3 °C.

Specific heat capacity (C) of water = 4.18 J/gºC

Heat (Q) absorbed =?

Q = MC(T₂ – T₁)

Q = 560 × 4.18 (80.3 – 22.7)

Q = 2340.8 × 57.6

Q = 134830.08 J

Finally, we shall determine the specific heat capacity of the burner. This can be obtained as follow:

Mass (M) of burner = 699 g

Initial temperature (T₁) = 482.0°C

Final temperature (T₂) = 22.7 °C

Heat (Q) evolved = – 134830.08 J

Specific heat capacity (C) of the burner =?

Q = MC(T₂ – T₁)

–134830.08 = 699 × C (22.7 – 482.0)

–134830.08 = 699 × C × –459.3

–134830.08 = –321050.7 × C

Divide both side by –321050.7

C = –134830.08 / –321050.7

C = 0.42 J/gºC

Therefore, the specific heat capacity of the burner is 0.42 J/gºC

If 263 ml of a gas is collected at 47°c and 2.77 atm, what will the final temp be in C if the volume decreases to 195 mL and the pressure increases to 3.87 atm?
im stoopid so yeh pls help

Answers

Answer:

[tex]58.48^{\circ}\text{C}[/tex]

Explanation:

[tex]P_1[/tex] = Initial pressure = 2.77 atm

[tex]V_1[/tex] = Initial volume = 263 mL

[tex]T_1[/tex] = Initial temperature = [tex]47^{\circ}\text{C}=(47+273.15)\ \text{K}[/tex]

[tex]P_2[/tex] = Final pressure = 3.87 atm

[tex]V_2[/tex] = Final volume = 197 mL

[tex]T_2[/tex] = Final temperature

We have the relation

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow T_2=\dfrac{P_2V_2}{P_1V_1}\times T_1\\\Rightarrow T_2=\dfrac{3.87\times 195}{2.77\times 263}\times (47+273.15)\\\Rightarrow T_2=331.63\ \text{K}=331.63-273.15\\\Rightarrow T_2=58.48^{\circ}\text{C}[/tex]

The final temperature will be [tex]58.48^{\circ}\text{C}[/tex].

what is the molar mass of aspartic acid​

Answers

What is the molar mass of aspartic acid, C404H7N?

ANSWER: 133g/mol

The molar mass of aspartic acid is 133.05g/mol.

What is molar mass?

The molar mass is the mass per unit amount of substance of a given chemical entity. It is denoted by a symbol M. The SI unit of molar mass is kg/mol.

What is aspartic acid?

Aspartic acid is one of the building-block of amino acids which is responsible for synthesizing proteins and regulating hormones in the human body.

The chemical formula of aspartic acid is C4H7NO4.

Atomic mass of C = 12.011u, H = 1.007u, N = 14.006u, O = 16u

Molar mass of C4H7NO4 = 4(12.011)+7(1)+14.006+4(16)

                 = 48.044+7+14.006+64

                 = 133.05g/mol

Hence, the molar mass of aspartic acid is 133.05g/mol.

To learn more about molar mass here

https://brainly.com/question/12127540

#SPJ2

What is the molarity of a solution made by dissolving 5 mol of H3PO4 in 0.05 L of solution?
Need Fast!

Answers

Answer:

"100" is the molarity of solution.

Explanation:

The given values are:

Moles of solute,

= 5 mol

Liters of solution,

= 0.05 L

Now,

The molarity of a solution will be:

=  [tex]\frac{Moles \ of \ solute}{Liters \ of \ solution}[/tex]

On substituting the values, we get

=  [tex]\frac{5}{0.05}[/tex]

=  [tex]100[/tex]

Question 7
3 pt:
N2 + 312 --> 2N13
If 81.3 grams of lodine is reacted with 4.49 grams of nitrogen what is the theoretical yield?
(Include the correct number of significant figures but no units)
Question 8

Answers

Answer:

84.3 g of nitrogen triiodide is the theoretical yield.

Explanation:

Hello there!

In this case, according to the chemical reaction:

[tex]N_2 + 3I_2 \rightarrow 2NI_3[/tex]

It is possible to compute the theoretical yield of nitrogen triiodide by each reactant via stoichiometry as shown below:

[tex]m_{NI_3}^{by\ N_2}=4.49gN_2*\frac{1molN_2}{28.01gN_2} *\frac{2molNI_3}{1molN_2}*\frac{394.72gNI_3}{1molNI_3} =126.55gNI_3\\\\m_{NI_3}^{by\ I_2}=81.3gI_2*\frac{1molI_2}{253.81gI_2} *\frac{2molNI_3}{3molI_2}*\frac{394.72gNI_3}{1molNI_3} =84.29gNI_3[/tex]

Therefore, we infer that the smallest amount is the correct theoretical yield as it comes from the limiting reactant, in this case, diatomic iodine as it yields 84.3 g (three significant figures) of nitrogen triiodide as the theoretical yield; incidentally, nitrogen acts as the excess reactant.

Best regards!

How many moles are there in 8.0 grams of CaCO3

Answers

Answer: moles = 0.0799305403604264

Explanation:

A 16.4 g sample of calcium chloride is dissolved in enough water to make 750.0 mL of solution. Calculate the molarity of calcium chloride in this solution. plz help!!!

Answers

SIMP FOR LEVI AKRAMEN

The molarity is an important method to calculate the concentration of a solution. The molarity of calcium chloride of 16.4 g in 750.0 mL of solution is 0.196 mol L⁻¹.

What is molarity?

The molarity of a solution is defined as the number of moles of the solute present per litre of the solution. It is mainly employed in calculating the molarity of a binary solution. It is represented as 'M' and unit is mol L⁻¹.

The equation used to calculate the molarity is given as:

Molarity = Number of moles of the solute / Volume of the solution in litres

Molar mass of CaCl₂ = 110.98 g/mol

Given mass = 16.4 g

Number of moles = 16.4 / 110.98 = 0.147

750.0 mL = 0.75 L

Molarity = 0.147 / 0.75 = 0.196 mol L⁻¹

Thus the molarity is 0.196 mol L⁻¹.

To know more about molarity, visit;

https://brainly.com/question/16727614

#SPJ2

During a lab experiment performed at STP conditions, you prepare HCl by reacting 100. ml of Cl2 gas with an excess of H2 gas.
How many ml of a solution of Ba(OH)2 0.230M do you need to neutralize all the HCl produced?

Answers

Answer:

19.4 mL Ba(OH)2

Explanation:

H2(g) + Cl2(g) --> 2HCl(aq) (make sure this equation is balanced first)

At STP, 1 mol gas = 22.4 L gas. Use this conversion factor to convert the 100. mL of Cl2 to moles.

0.100 L Cl2 • (1 mol / 22.4 L) = 0.00446 mol Cl2

Use the mole ratio of 2 mol HCl for every 1 mol Cl2 to find moles of HCl produced.

0.00446 mol Cl2 • (2 mol HCl / 1 mol Cl2) = 0.00892 mol HCl

HCl is a strong acid and Ba(OH)2 is a strong base so both will completely ionize to release H+ and OH- respectively. You need 0.00892 mol OH- to neutralize all of the HCl. Note that one mole of Ba(OH)2 contains 2 moles of OH-.

0.00892 mol OH- • (1 mol Ba(OH)2 / 2 mol OH-) • (1 L Ba(OH)2 / 0.230 M Ba(OH)2) = 0.0194 L = 19.4 mL Ba(OH)2

The first step in answering this reaction is to write down the required reaction equations and then answer the questions from stoichiometry(mass-mole relationship).

The first equation is;

[tex]H2(g) + Cl2(g) ------->2HCl(g)[/tex]

The second equation is

[tex]2HCl(g) + Ba(OH)2(aq) -------> BaCl2(aq) + 2H2O(l)[/tex]

From stoichiometry;

1ml = 1cm3

Since hydrogen is in excess, chlorine is the limiting reactant

1 mole of Cl2 occupies 22400cm3

x moles of Cl2 occupies 100cm3

x = 1 * 100/22400

x = 0.00446 moles of Cl2

According to the reaction equation;

1 mole of Cl2 yields 2 moles of HCl

0.00446 moles of Cl2 yields 0.00446 * 2/1

= 0.00892 moles of HCl

From the reaction equation;

2 moles of HCl reacts with 1 mole of Ba(OH)2

0.00892 moles of HCl reacts with 0.00892 * 1/2 = 0.00446 moles of Ba(OH)2

Since 0.00446 moles of Ba(OH)2 reacted

number of moles = concentration * volume

number of moles =  0.00446 moles

concentration = 0.230M

Let the volume in ml be V

0.00446 =  0.230 * V/1000

V = 0.00446 * 1000/ 0.230

V = 19.39 ml

Volume in ml = 19.39 ml of Ba(OH)2

Learn more: https://brainly.com/question/9743981

What is the molarity of ZnCl, that forms when 20.0 g of zinc completely reacts with CuCl2, according to the following reaction? Assume a final
volume of 285 mL

Zn(s) + CuCl2(aq) → ZnCl2(aq) + Cu(s)

Answers

1.61m :) use the photo below

Joseph rides his bike for 30 miles in one hour
going west . Is it speed velocity or acceleration

Answers

Answer:

velocity

Explanation:

because he is going 30 miles west

Study the diagram of the two animals.




Which statement best describes the animals?


Animal X begins life as a tadpole, and animal Y begins life as a larva that looks like the adult.

Animal X begins life as a larva that looks like the adult, and animal Y begins life as a tadpole.

Both animal X and animal Y begin life as a tadpole and change form as they develop.

Both animal X and animal Y begin life as a larva that looks like the adult.

Answers

Both animal X and animal Y begin life as a tadpole and change form as they develop

Answer:

it is c, for those who want an answer fast

Explanation:

Who kept scientific experiments from being performed in the middle
ages?
A. The Government
B. The Judicial System
C. The Board of Science
D. The Church

Answers

Answer:

D. The Church

plz mark me as brainliest

Please Answer Giving Brainleist
What gas in the air is used by plants to make their own food?

A) Nitrogen

B) Water vapor

C) Carbon dioxide

D) Oxygen

Answers

Answer:

C) Carbon dioxide is the answer.

Answer:

C. Carbon Dioxide

Carbon is absorbed by plants and chemically converted to oxygen via photosynthsis.

Hope this helps!

Bonds are formed because atoms are more stable when they have the valence shell in the electron noble gas configuration (full outer valence shell). What is the net charge of either molecular
ionic compounds?
o
А
Positive
B
Negative
O &
D
Zero-neutral

Answers

I would say answer choice A) positive after checking, hope this helps

When the Sun and Moon are aligned in the same direction, the tides are higher than normal, known as________

Answers

Answer:

spring tides is the correct answer of your question

What resists pH change by reacting with acids and bases?

Answers

A buffer resists the change of ph. That is because a buffer is made of an acid and it’s conjugate base. This mixture will react with any solution that is added to neutralize it. If an acid is added to a buffer, the base in that buffer will react with the added acid to create water and a neutral salt. This reaction results in very little ph change

Consider 4.70 L of a gas at 365 mmHg and 20. ∘C . If the container is compressed to 2.00 L and the temperature is increased to 36 ∘C , what is the new pressure, P2, inside the container? Assume no change in the amount of gas inside the cylinder.

Answers

Answer:

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Explanation:

CH4 Structural formulas​

Answers

Explanation:

Methane = CH4

(formula)

Balance the following equations:
C3H8 (g) + O2 (g) → CO2 (g) + H2O (g)
NH3 (g) O2 (g) NO2 (g) H2O (g)
Al(NO3) Na3S Al2S3 NaNO3

Answers

Explanation:

C3H8 + 502 ----> 3CO2 + 4H20

4NH3+7O2------> 4NO2+6H2O

2Al(NO3)3 + 3Na2S -------> Al2S3+6NaNO3

the exact position of the electrons of an atom cannot be determined because they are in constant ___

Answers

movement
i’m pretty sure-

The models show the phases of a substance at various temperatures. Which model BEST communicates the kinetic energy and particle arrangement of a liquid? A. Model D, because it has high kinetic energy so the particles in the model have ionized B. Model B, because it has some kinetic energy and the particles have a free flowing shape C. Model C, because it has high kinetic energy so the particles in the model have no definite shape D. Model A, because it has some kinetic energy and the particles move freely

Answers

Answer: Model B. I have included a graph for this question. Model D is incorrect because that is a model for plasma as liquid doesn't contain ionized particles. Model C is incorrect as that represents a solid. Model A is incorrect because that is showing a gas; the particles are moving very freely

According to the forces of attraction, model B  communicates the kinetic energy and particle arrangement of a liquid.

What are forces of attraction?

Forces of attraction is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

The physical properties such as melting point, boiling point, density  are all dependent on forces of attraction which exists in the substances.

Learn more about forces of attraction,here:

https://brainly.com/question/23841038

#SPJ2

Your question is incomplete  but most probably your full question was, The models show the phases of a substance at various temperatures. Which model BEST communicates the kinetic energy and particle arrangement of a liquid? A. Model D, because it has high kinetic energy so the particles in the model have ionized B. Model B, because it has some kinetic energy and the particles have a free flowing shape C. Model C, because it has high kinetic energy so the particles in the model have no definite shape D. Model A, because it has some kinetic energy and the particles move freely

what is the electron configuration of S and Cl?

Answers

Answer:

S is [Ne] 3s²3p⁴

Cl is [Ne] 3s² 3p⁵

Explanation:

7) What is the speed of a jet plane
that flies 7200 km in 9.5 hours?

Answers

Answer:

68,400

Explanation:

How can we find life on other planets?

Answers

Through satellites...

does anyone know the answer???​

Answers

Answer:

ethyl ethernal

Explanation:

no explanation

How many atoms are in a ring made of pure gold, Au (element 79), if there are 0.092 moles of gold in it?

Answers

Answer:

i think it wil be 567489

Explanation:

ik im right :)

what is the pH level of soda?​

Answers

Cherry Coke was found to be the next most acidic (pH of 2.522), and Coke was the third most acidic soda tested (pH of 2.525). Battery acid has a pH of 1.0. Pure water at room temperature has a pH of 7.0. The results show that a soda's acidity is not the whole story when it comes to tooth erosion.

A compound contains 53% Al and 47% O by mass. What
is the empirical formula of this compound?

Answers

Answer:

Al2O3

Explanation:

Empirical formula is found by converting percent composition into a mole ratio.

First, assume you have a 100g sample of the substance. This allows you to make your percent composition into grams.

100% = 100g

53% = 53g Al

47% = 47g O

Next, divide each substance's mass by their molar mass. This converts your number to moles.

[tex]53g Al / 27g Al = 1.96 mol\\\\47g O/16g O = 2.93mol[/tex]

Next, divide both mol answers by the smallest number of moles.

[tex]1.96mol/1.96mol = 1\\2.93mol/1.96mol = 1.5[/tex]

Usually, these answers would be your subscripts for your empirical formula. However, we cannot have a decimal subscript, so we will multiply our answers by a factor of 2 to get to a whole number. This gives us 2 moles of Al and 3 moles of oxygen, or a formula of Al2O3.

Considering the definition of empirical formula, the correct answer is the second option: the empirical formula is Al₂O₃.

Definition of empirical formula

The empirical formula is the simplest expression to represent a chemical compound, which indicates the elements that are present and the minimum proportion in whole numbers that exist between its atoms, that is, the subscripts of chemical formulas are reduced to the most integers. small as possible.

Empirical formula in this case

Assuming a 100 grams sample, the percentages match the grams in the sample. So you have 53 grams of Al and 47 grams of O.

Then it is possible to calculate the number of moles of each atom in the molecule, taking into account the corresponding molar mass:

Al: [tex]\frac{53 grams}{27 \frac{grams}{mole} }[/tex]= 1.9629 moles

O: [tex]\frac{47 grams}{16 \frac{grams}{mole} }[/tex]= 2.9375 moles

The empirical formula must be expressed using whole number relationships, for this the numbers of moles are divided by the smallest result of those obtained. In this case:

Al: [tex]\frac{1.9629 moles}{1.9629 moles}[/tex]= 1

O: [tex]\frac{2.9375 moles}{1.9629 moles}[/tex]≅ 1.5

You cannot have a decimal subscript, so you will multiply our answers by a factor of 2 to get to a whole number:

Al: 1× 2= 2

O: 1.5× 2= 3

Therefore the Al:O mole ratio is 2: 3

Finally, the correct answer is the second option: the empirical formula is Al₂O₃.

Learn more about empirical formula:

brainly.com/question/5115389?referrer=searchResults

brainly.com/question/4594902?referrer=searchResults

brainly.com/question/13725914?referrer=searchResults

brainly.com/question/13112542?referrer=searchResults

Physical chemistry is the bridge between physics and chemistry.

a. True
b. False

Answers

Answer:

Im gonna go with.... B. False

________________________________

*rate this answer and say thanks please!

┈╱▔╲▂╱╱╱╱▂╱▔╲┈┈

▕▔╲┈╱▔╲┈┈╱╲╱▔▏┈

▕▏┈▏╱▉╲┈┈╱▉╲▕▏┈

┈╲▃▏▔▔▔╲▂▂▂▕╱┈┈

┈┈┈▏┊┊┳┊╲▂╱┳▏┈┈

┈┈▕╲▂┊╰━━┻━╱┈┈┈

┈┈╱┈┈▔▔╲▂▂╱╲┈┈┈

Yes it is true. That physical chemistry is a bridge between physics and chemistry. Because here we study the physical behaviours of the chemical reactions.

Other Questions
If you borrow $675 for six years at an interest rate of 10% how much total will you pay back? Which word or phrase best clarifies the relationship between ideas in these sentences? the Byzantine Roman civilization lasted a long, long time. Empire lasted for about a thousand years. O A. However O B. Likewise C. On the other hand O D. Thus30 POINTSSSS!!!! Artistic achievement was financially supported during the Renaissance via (1) Super PACS (2) Investments from banks (3) Insurance payments (4) Patronage Why did late-1890s newspapers publish sensational stories about Cuba and the Spanish-American War? Newspapers used the stories to sell more papers. The stories were meant to attract more Spanish and Cuban readers in the United States. The stories helped elected US officials learn about what was happening. Newspapers wanted other countries to know that the United States was watching Cuba closely. Read the following, then select the best prediction.Brian has been working hard to bring his Biology grade up. His parents hired a tutor for him and he studied for this exam all weekend. As the teacher hands out the exam, Brian takes a deep breath and gets out his pencil.The test will be extremely difficult.Brian's friend will get a better score.Brian's pencil will break.Brian will do well on the test. Your brother who studied abroad has written to you saying he wants to come back to your country to get a job tell him why it is wise and unwise A.75B.80C.95D.110 !!!OMGG I NEED HELP QUESTION AT THE BOTTOM!!!! Question 4 of 10What was an argument used in favor of dropping atomic bombs on Japan?A. It would prove to Great Britain that the United States was asuperpower.B. It would prevent high casualties that would be caused by aninvasion of mainland Japan.C. It would prevent high casualties of civilians in Japanese cities.D. It would convince Germany it had to surrender.SUOMI Can someone plssss help? what is the 30th term In the sequence 10,7,4,1-3,...determine the term to term rule answer this plsequation 9(2j + 5j). use mathematical properties to create two expressions that are equivalent to the expression you created can anyone help me fast similarities of opera buffa and opera seria I Need Some Help With This, I can't Understand it. Am Giving 20 Points If 95 grams of Iron are needed to react with sulfur, how many grams of sulfur are involved in this reaction? 2 Fe + 3 S=Fe2S3 Use the letters to match with the numbers!!! Answer plz for an exam thank you !!! Which set of ordered pairs represents a function? Find the sum of the measures of the interior angles of a convex 45-gon. Please help and I will give you brainliest