help please 100 point

To minimize the annual holding and setup costs of purchasing bathroom tissue, you should buy single rolls of bathroom tissue. Purchasing the bathroom tissue in 12-packs is not more economical in this scenario.

To determine the optimal choice between buying single rolls and 12-packs of bathroom tissue, we need to consider the annual holding and setup costs.

a. To minimize the annual holding and setup costs, we need to compare the costs of buying single rolls versus 12-packs.

For single rolls:

Cost per roll = $0.45

Holding cost per roll per year = opportunity cost of money * cost per roll = 0.25 * $0.45 = $0.1125

Setup cost per purchase = $1

Consumption rate = 1 roll every 3 months = 4 rolls per year

For 12-packs:

Cost per pack = $5

Number of rolls in a 12-pack = 12

Holding cost per roll per year = 0.25 * ($5 / 12) = $0.1042

Setup cost per purchase = $1

To minimize the annual holding and setup costs, we need to compare the costs of purchasing the required number of single rolls and the cost of purchasing 12-packs.

b. Comparing the costs, it is more economical to purchase single rolls because the holding cost per roll per year is lower for single rolls ($0.1125) compared to 12-packs ($0.1042). Additionally, the setup cost is the same for both options ($1).

Therefore, to minimize the annual holding and setup costs, you should buy single rolls of bathroom tissue rather than 12-packs.

To know more about economical click here: brainly.com/question/14355320

#SPJ11

the general solution to the Cauchy-Euler equation x³y'" - 2x²y" - 2xy' + 8y = 0 is given by y(x) = c₁x² + c₂x⁻¹ + c₃x⁻¹ln(x) where c₁, c₂, and c₃ are constants.

To solve the Cauchy-Euler equation x³y'" - 2x²y" - 2xy' + 8y = 0, we'll make the substitution y = [tex]x^r[/tex], where r is a constant.

Let's differentiate y with respect to x:

y' = [tex]rx^{r-1}[/tex]

y" = [tex]r(r-1)x^{r-2}[/tex]

y'" = [tex]r(r-1)(r-2)x^{r-3}[/tex]

Now, substitute these derivatives into the original equation:

[tex]x^3(r(r-1)(r-2)x^{r-3} - 2x^2(r(r-1)x^{r-2}) - 2x(rx^{r-1}) + 8x^r = 0[/tex]

Simplifying, we get:

[tex]r(r-1)(r-2)x^r - 2r(r-1)x^r - 2rx^r + 8x^r = 0[/tex]

Combining like terms, we have:

r(r-1)(r-2) - 2r(r-1) - 2r + 8 = 0

Simplifying further, we get:

r³ - 3r² + 2r - 2r² + 2r + 8 - 2r + 8 = 0

r³ - 3r² + 8 = 0

To solve this cubic equation, we can try to find a rational root using the Rational Root Theorem or use numerical methods to approximate the roots.

By inspection, we find that r = 2 is a root of the equation. This means (r - 2) is a factor of the equation.

Using long division or synthetic division, we can divide r^3 - 3r^2 + 8 by (r - 2):

  2  |   1    -3    0    8

      |       2   -2   -4

_______________________

       1    -1   -2    4

The quotient is r² - r - 2.

Factoring r² - r - 2, we get:

r² - r - 2 = (r - 2)(r + 1)

So the roots of the equation r³ - 3r² + 8 = 0 are: r = 2, r = -1 (repeated root).

Therefore, the general solution to the Cauchy-Euler equation x³y'" - 2x²y" - 2xy' + 8y = 0 is given by:

y(x) = c₁x² + c₂x⁻¹ + c₃x⁻¹ln(x)

where c₁, c₂, and c₃ are constants.

Learn more about Cauchy-Euler equation here

https://brainly.com/question/31419735

#SPJ4

Given question is incomplete, the complete question is below

Solve the Cauchy-Euler equation:

x³y'" - 2x²y" - 2xy' + 8y = 0

Answer:

She would have ran 8 laps.

Step-by-step explanation:

4/4 = 1 mile so therefore she would need 8/8 for it to be 2 miles

Answer:

[tex] m\angle SYX=76\degree [/tex]

Step-by-step explanation:

[tex] m\angle SYX = m\angle UYV[/tex]

(Vertical angles)

[tex] \because m\angle UYV=76\degree [/tex]

[tex] \therefore m\angle SYX=76\degree [/tex]

Answer:

33

Step-by-step explanation:

well we know you have a right angle and a right angle is equivalent to 90 degrees and you also have angle 57 now we know a triangle is equal to 180 so take 90+57=180 add the 90 and 57 then subtract the anwser from 180

Answer:

C?

Step-by-step explanation:

Answer: 106,000 dollars

Step-by-step explanation:

She paid 36,000 dollars as income tax and 60,000 on the rent property tax and 96,000 dollars + 10,000 dollars is 106,000 dollars.

Answer:

total surface area (TSA) = [tex]2bs[/tex] + [tex]b^{2}[/tex]

                      length      = 6 mi

                    slant height = 7 mi

           ∴ TSA                   = 2 × 6 × 7 + [tex]6^{2}[/tex]

                                       = 84 + 36

                                      = 120

The surface area of the square pyramid is 120 sq. mi.

Given:

side length (s) = 6 mi

slant height (l) = 7 mi

*image of a typical square pyramid is shown in the attachment below.

Recall:

Formula for surface area of square pyramid (SA) = [tex]A + \frac{1}{2} Pl[/tex]

Where,

[tex]A =[/tex] area of the base = [tex]s^2 = 6^2 = 36[/tex] sq mi

[tex]P =[/tex] perimeter of the base = [tex]4(s) = 4\times 6 = 24[/tex] mi

[tex]l =[/tex] slant height = 7 mi

Plug in the values

[tex]SA = 36 + \frac{1}{2}\times 24\times 7\\SA = 36 +84\\SA = 120[/tex]

The surface area(SA) of the square pyramid is 120 sq. mi

Learn more about surface area of a square pyramid here:

https://brainly.com/question/8830629

Mean of the sampling distribution (wx): $900

Standard error of the mean (σx): Approximately $32.92

To find the mean and standard error of the mean of the sampling distribution, we can use the Central Limit Theorem.

The Central Limit Theorem states that for a large enough sample size, the sampling distribution of the sample means will be approximately normally distributed, regardless of the shape of the population distribution.

In this case, the population mean is μ = $900 and the population standard deviation is σ = $180. We are drawing random samples of size n = 30 from this population.

The mean of the sampling distribution (wx) will be equal to the population mean (μ), which is $900.

The standard deviation of the sampling distribution (σx), also known as the standard error of the mean, can be calculated using the formula:

σx = σ / √n

where σ is the population standard deviation and n is the sample size.

Substituting the given values, we have:

σx = $180 / √30

Calculating this value, we find:

σx ≈ $32.92

Therefore, the mean of the sampling distribution (wx) is $900, and the standard error of the mean (σx) is approximately $32.92.

Please note that the Central Limit Theorem assumes a sufficiently large sample size (typically n ≥ 30) for the approximation to hold.

To know more about sampling distribution:

brainly.com/question/13501743

#SPJ4

Answer:

m [tex]\leq[/tex] 24

Step-by-step explanation:

-4m ≥ 96

(divide both sides by -4)

m [tex]\leq[/tex] 24

(sign flips because dividing by a negative)

The correlation coefficient (p(Z, W)) between Z and W is sqrt(2) / 2.

To find the covariance of Z and W and the correlation coefficient (p(Z, W)), we can use the properties of covariance and correlation for independent random variables.

Given that X and Y are independent N(0, 2) random variables, we know that their means are zero and variances are 2 each.

Covariance:

Cov(Z, W) = Cov(7 + X + Y, 1 + Y)

Since X and Y are independent, the covariance between them is zero:

Cov(X, Y) = 0

Using the properties of covariance, we have:

Cov(Z, W) = Cov(7 + X + Y, 1 + Y)

= Cov(X, Y) + Cov(Y, Y)

= Cov(X, Y) + Var(Y)

Since Cov(X, Y) = 0 and Var(Y) = 2, we can substitute these values:

Cov(Z, W) = 0 + 2

= 2

Therefore, the covariance of Z and W is 2.

Correlation Coefficient:

p(Z, W) = Cov(Z, W) / (sqrt(Var(Z)) * sqrt(Var(W)))

To calculate p(Z, W), we need to find Var(Z) and Var(W):

Var(Z) = Var(7 + X + Y)

= Var(X) + Var(Y) (since X and Y are independent)

= 2 + 2 (since Var(X) = Var(Y) = 2)

= 4

Var(W) = Var(1 + Y)

= Var(Y) (since 1 is a constant and does not affect variance)

= 2

Now we can calculate p(Z, W):

p(Z, W) = Cov(Z, W) / (sqrt(Var(Z)) * sqrt(Var(W)))

= 2 / (sqrt(4) * sqrt(2))

= 2 / (2 * sqrt(2))

= 1 / sqrt(2)

= sqrt(2) / 2

Therefore, the correlation coefficient (p(Z, W)) between Z and W is sqrt(2) / 2.

Know more about the correlation coefficient click here:

https://brainly.com/question/29704223

#SPJ11

The required answer is  based on the given data, we do not have sufficient evidence to support the claim that less than 10 percent of the test results are wrong at a 0.05 significance level.

To test the claim that less than 10 percent of the test results are wrong, use a hypothesis test with a significance level of 0.05. Let's define the null and alternative hypotheses:

Null Hypothesis (H0): The proportion of wrong test results is 10 percent or more.

Alternative Hypothesis (Ha): The proportion of wrong test results is less than 10 percent.

Use the binomial distribution to analyze the data. Let p be the true proportion of wrong test results. Since we want to test that the proportion is less than 10 percent, set p = 0.10 for the null hypothesis.

Given that 29 out of 308 tested subjects had wrong test results,  calculate the sample proportion, denoted by p^, as follows:

p^ = 29 / 308 = 0.094

To conduct the hypothesis test, we can use the z-test for proportions. The test statistic is calculated as:

z = (p^ - p) / [tex]\sqrt{}[/tex]((p x (1 - p)) / n)

In this case, since we are testing whether the proportion is less than 10 percent, calculate a one-tailed z-test.

Substituting the values into the formula:

z = (0.094 - 0.10) / [tex]\sqrt{}[/tex]((0.10 x (1 - 0.10)) / 308)

Simplifying the expression:

z = -0.006 /[tex]\sqrt{}[/tex] (0.09 / 308)

z ≈ -0.006 / 0.017

Calculating the z-value:

z ≈ -0.353

To determine the critical value for a one-tailed test at a significance level of 0.05, we can consult the z-table or use statistical software. For a significance level of 0.05, the critical z-value is approximately -1.645 (since we are testing for less than 10 percent, in the left tail).

Since the calculated z-value (-0.353) is greater than the critical z-value (-1.645), we fail to reject the null hypothesis. There is not enough evidence to conclude that the proportion of wrong test results is less than 10 percent.

Therefore, based on the given data, we do not have sufficient evidence to support the claim that less than 10 percent of the test results are wrong at a 0.05 significance level.

Learn more about hypothesis testing  here:

https://brainly.com/question/30542688

#SPJ4

Answer: you know it’s 9mins but Im not sure how I should make the equation probably I think (53= 9T + 4)

Step-by-step explanation:

The linear transformation T: R^2 → R^2, defined by T(v) = Av, where A = [[-2, -2], [1, 2]], maps a two-dimensional vector space onto itself. The dimension of R^2 is 2.

In the given linear transformation T: R^2 → R^2, the transformation is defined as T(v) = Av, where A is the transformation matrix. The given matrix A = [[-2, -2], [1, 2]] represents the coefficients of the linear transformation. This means that the transformation T takes a two-dimensional vector v in R^2 and applies the matrix A to it.

The dimension of R^2 is 2, indicating that the vector space R^2 consists of all ordered pairs (x, y) where x and y are real numbers. In this case, the linear transformation T maps a vector in R^2 to another vector in R^2, so both the input and output dimensions are 2.

The dimension of R^n refers to the number of components or variables in a vector in R^n. For example, R^2 consists of vectors with two components, while R^3 consists of vectors with three components. In this case, the dimension of R^2 is 2 because each vector in R^2 has two components.

To summarize, the given linear transformation T: R^2 → R^2, with the matrix A = [[-2, -2], [1, 2]], maps a two-dimensional vector space onto itself. The dimensions of both R^2 and R^2 are 2, representing the number of components in the vectors of each space.

Learn more about linear transformation here:

https://brainly.com/question/13595405

#SPJ11

Answer:

20 inches

Step-by-step explanation:

Since the cape is trapezoid shaped and has an area of 600 in², the area of a trapezoid is given by

A =1/2(a + b)h where a = length along the top of the cape = 24 in, b =  length along the bottom of the cape = 36 in and h = height of the cape

So, h = 2A/(a + b)

= 2 × 600 in²/(24 in + 36 in)

= 1200 in²/60 in

= 20 in

So, the height of the cape is 20 inches

Answer:

the complementary angle is 14°

the supplementary angle is 104°

Step-by-step explanation:

76+14=90

76+104=180

Answer:

y=-3x+5.5

Step-by-step explanation:

The answer is Y=-3x+5.5 because we already know the slope which is -3. Now all you have to do is change the Y-Intercept. As you can tell the Y-Intercept is not a whole number. So you have to change it to a decimal to get the point that you want. You can put the last part of the equation as 5.5 or 5.55. It doesn't matter but 5.5 is more official. If you find any fault in my answer let me know. Thanks. Have a good day!

Answer:

if you round of. 20 the answer is 10

Answer:

B-16

Step-by-step explanation:

jsjjsjdjsjsjxjsjsijsjdjdjjsjzjzijzjsndjidjsjsid

Given:

The vertices of a triangle are A(-1,-1), B(-1,-5), C(0.5,-5).

The figure is translated 2 units left.

To find:

The vertices and the diagram of the triangle after the given translation.

Solution:

if a figure is translated 2 units left, then

[tex](x,y)\to (x-2,y)[/tex]

Using the above rule, we get

[tex]A(-1,-1)\to A'(-1-2,-1)[/tex]

[tex]A(-1,-1)\to A'(-3,-1)[/tex]

Similarly,

[tex]B(-1,-5)\to B'(-1-2,-5)[/tex]

[tex]B(-1,-5)\to B'(-3,-5)[/tex]

And,

[tex]C(0.5, -5)\to C'(0.5-2,-5)[/tex]

[tex]C(0.5, -5)\to C'(-1.5,-5)[/tex]

So, the vertices of the triangle after the translation are A'(-3,-1), B'(-3,-5), C'(-1.5,-5).

Therefore, the correct option is B.

Answer:

B

Step-by-step explanation:

Area of circle = pi × r squared

A= 3.14....× (1.5×1.5)

A= 7.068583471

A= 7.07in( to nearest hundredth)

The probability that the bottle contains between 12.19 and 12.25 ounces is 0.1525.

Given, mean (μ) = 12.29 ounces and standard deviation (σ) = 0.04 ounce.

We need to find the probability that the bottle contains between 12. 19 and 12.25 ounces.

So, let X be the amount of beer filled by the machine. Then, X ~ N(12.29, 0.04²)

Let Z be the standard normal random variable.

Then, Z = `(X - μ)/σ`

Substituting the values, we get,Z = `(X - 12.29)/0.04`

For X = 12.19, `Z = (12.19 - 12.29)/0.04 = -2.5`

For X = 12.25, `Z = (12.25 - 12.29)/0.04 = -1

`Now we need to find the probability of Z being between -2.5 and -1.P(Z lies between -2.5 and -1) = P(-2.5 < Z < -1)

We know that P(Z < -1) = 0.1587 and P(Z < -2.5) = 0.0062

From standard normal distribution table, we get

P(-2.5 < Z < -1)

= P(Z < -1) - P(Z < -2.5)P(-2.5 < Z < -1)

= 0.1587 - 0.0062 = 0.1525

Therefore, the probability that the bottle contains between 12.19 and 12.25 ounces is 0.1525.

#SPJ11

Let us know more about probability: https://brainly.com/question/32117953.

Answer:

B

Step-by-step explanation:

I did it on khan academy

Answer:

Z=[tex]7\sqrt{2}[/tex] m

Step-by-step explanation:

This is a 45º-45º-90º triangle. That means the side lengths are x, x, and [tex]x\sqrt{2}[/tex].

In this case 14 m is equal to [tex]x\sqrt{2}[/tex]. Now solve for X, which is equal to Z.

The rest of the work is written down in the file attached

Don't forget the units though!

hope I could help

To sketch the graph of a function that has a local maximum at 6 and is differentiable at 6, we can consider a function that approaches a maximum value at 6 and has a smooth, continuous curve around that point.

In the graph, we can depict a curve that gradually increases as we move towards x = 6 from the left side. At x = 6, the graph reaches a peak, representing the local maximum. From there, the curve starts to decrease as we move towards larger x-values.

The important aspect to note is that the function should be differentiable at x = 6, meaning the slope of the curve should exist at that point. This implies that there should be no sharp corners or vertical tangents at x = 6, indicating a smooth and continuous transition in the graph.

By incorporating these characteristics into the graph, we can represent a function with a local maximum at 6 and differentiability at that point.

To learn more about differentiable click here:

brainly.com/question/24898810

#SPJ11

Given that, height of the right-angled triangle = 4m. Width of the right-angled triangle = 1m. Let's assume that the rectangular enclosure will be built at the base of the right-angled triangle. The area of the rectangular enclosure can be obtained using the formula, Area of rectangle = length × breadth. Length of the rectangle = height of the right-angled triangle = 4mLet the breadth of the rectangle be x, then the length is the width of the right-angled triangle + x = 1 + x Hence, the area of the rectangular enclosure is given by: Area = Length × Breadth= (1+x)×4= 4x + 4m²Now, the maximum area can be obtained by differentiating the above expression with respect to x and equating it to zero: dA/dx = 4 = 0x = -1. This is not a valid solution since we cannot have a negative breadth, hence we conclude that the area is maximum when the breadth of the rectangular enclosure is equal to the width of the right-angled triangle, i.e., when x = 1m. Thus, Area of the rectangular enclosure = Length × Breadth= (1+1)×4= 8 m². Hence, the largest the area of Gottfried’s enclosure can be is 8 m².

To know more about Gottfried’s enclosure, click here:

https://brainly.com/question/29293732

#SPJ11

Let's assume the height of the TV set is h inches.

a. The height of the TV set is h inches.

Given that the length is 21 inches more than the height, the length can be represented as h + 21 inches.

b. The length of the TV set is h + 21 inches.

According to the given information, the diagonal of the TV set is 39 inches. We can use the Pythagorean theorem to relate the height, length, and diagonal:

(diagonal)^2 = (height)^2 + (length)^2

Substituting the values, we have:

39^2 = h^2 + (h + 21)^2

Expanding and simplifying:

1521 = h^2 + h^2 + 42h + 441

2h^2 + 42h + 441 - 1521 = 0

2h^2 + 42h - 1080 = 0

Dividing the equation by 2 to simplify:

h^2 + 21h - 540 = 0

We can solve this quadratic equation by factoring or using the quadratic formula. Factoring gives us:

(h - 15)(h + 36) = 0

So h = 15 or h = -36.

Since the height of the TV set cannot be negative, we discard h = -36.

Therefore, the height of the TV set is 15 inches.

Substituting this value back into the length equation, we have:

Length = h + 21 = 15 + 21 = 36 inches.

So, the dimensions of the TV set are:

a. The height of the TV set is 15 inches.

b. The length of the TV set is 36 inches.

Learn more about height of the TV set from

https://brainly.com/question/29205009

#SPJ11

Answer:

Is this high school math or middle school?.

Step-by-step explanation:

a²+b² = c²

8²+2²

↓    ↓

64+4

   ↓

square root 68 and it should give you 8.24 and then you round.