Answer:
The mass of the solution is 140 grams.
Explanation:
The mass of the solution is given by the sum of the solute's mass and the solvent's mass:
[tex] m_{sol} = m_{ste} + m_{svt} [/tex]
Where:
[tex] m_{sol} [/tex]: is the mass of the solution
[tex]m_{ste}[/tex]: is the mass of the solute
[tex]m_{svt} [/tex]: is the mass of the solvent
The solute is the salt (40.0 g) and the solvent is the water (100 g), so:
[tex] m_{sol} = m_{ste} + m_{svt} = 40 g + 100 g = 140 g [/tex]
Therefore, the mass of the solution is 140 grams.
I hope it helps you!
Which atom contains no neutrons in the nucleus?
WARNING: NO LINKS OR YOU WILL BE REPORTED!!!!!
DON'T PUT IMPROPER ANSWER BECAUSE YOU WILL BE REPORTED!
Answer:
Hydrogen
Explanation:
BECAUSE IT HAS NO NEURTONS!!
YALL KNOW WHATS UPPPPP
HAIIIII REEEEEEE
answer this question no links
Answer:
it is b, a stethiscope is the thing they put on your heart
Explanation:
How many grams of oxygen are present in 10g of H2 SO4?
(Please Help Im blowing most of my points for this)
In earthquake-prone areas, engineers design buildings that are resistant to earthquake damage. Here’s a diagram of an earthquake-resistant building in Japan. Explain how features A, B, and C help protect the building from earthquake damage. In your explanation, describe how you could model each feature using marshmallows and toothpicks.
Answer:
In this earthquake-resistant building, two steel supports in the shape of an X (A) help to reinforce walls. Concrete walls with steel bars in them (B) lessen any rocking movements. Shock absorbers (C) take up some of the building’s kinetic energy during a quake. I could use the toothpicks as the two steel in the shape of an X. The concrete walls and the shock absorbers would be the marshmallows.
Features shown by points A, B & C are reinforce walls, concrete walls and shock absorbers respectively.
What is earthquake?Earthquake is a kind of natural disaster in which an intense shaing of the earth's outermost layer takes place.
According to the image following points we will consider as:
Two steel supports in the shape of an X (A) help to reinforce walls in this earthquake-resistant structure.Any rocking movements are reduced by concrete walls with steel bars (B).During a quake, shock absorbers (C) absorb some of the kinetic energy of the building.We can use the toothpicks in the shape of X as the two steel and concrete walls & the shock absorbers as the marshmallows.
Hence, marshmallows are used as the concrete walls and toothpicks are used as two steel rods.
To know more about earthquake-resistant building, visit the below link:
https://brainly.com/question/15732302
#SPJ2
PLEASE HELP HELP ME. THIS IS DUE TODAY PLEASE
Answer:
5.B 6.A
Explanation:
(sorry if this is short)
A .3 piece of copper is heated and fashioned into a bracelet. The amount of energy transferred by heat to the copper is 63500 J. If the specific heat of copper is 390 J/g degrees celsius, what is the temperature change during this process
Answer:
600k
Explanation:
6300j//390j/g
=600k
How many molecules are in 0.33 moles of CaCO3?
If a response is towards a stimulus it's described as _______; if a response is away from the stimulus it's described as _____.
Answer: Positive tropism, negative tropism
Explanation:
Stimulus can be define as external and internal agent which generate a response in an organism. If the growth and action is towards the stimulus it is called as positive tropism. If the growth and action is away from the stimulus it is called as negative tropism. Example, the growth of the stem towards the sunlight is called positive tropism whereas the growth of the root away from the sunlight is called negative tropism. Here, sunlight is the stimulus.
What is the difference between a cup of tea at 95°C, and a drop of tea at 95°C?
Answer:
See the explanation below
Explanation:
Both the cup of coffee and drop of coffee have the Same temperature of 95°C.
Although the difference is the cup of coffee has more heat contained in it than the drop of coffee. An explanation is when we heat a cup of coffee it will take more time to Attain in 95°C while the drop of coffee will take less time
An aqueous solution has a hydroxide-ion concentration of 1.0x10^-3M. What is the pH of the solution?
a.11
b.3
c.-3
d.7
what mass of O2 is needed to completely react with 500 g of Fe
Answer:
solution given:
Explanation:
4Fe +3O2------------>2Fe2O3
4mole. 3mole. 2 mole
224g. 96g. 320g
we have
224 g of fe needed to react completely with 96 g of O2
500g of fe needed to react completely with
96 ×500/224=214.3g of O2
214.3g of O2 is a required answer.
"The mass of [tex]O_{2}[/tex] will be 214.3g to completely react with 500 g of Fe."
What is mass?
A physical body's mass is the amount of matter it contains. It can also use to measure moment of inertia, or the resistance to movement when one net force is exerted. The degree of an object's gravitational pull to other bodies is also determined by its mass. The kilogram is the SI base unit of mass.
The reaction between Fe and [tex]O_{2}[/tex] can be written as:
[tex]4Fe+3O_{2}[/tex] → [tex]2Fe_{2}O_{3}[/tex]
It can be see that 4 mole of iron is reacts with 2 mole of oxygen and its form 2 mole of [tex]2Fe_{2}O_{3}[/tex]
So, 224 g of iron is needed in the reacted with oxygen (96 g).
500 g of iron will be needed = 96× 500/224= 214.3g of [tex]O_{2}[/tex].
To know more about mass click here.
https://brainly.com/question/19694949.
#SPJ2
How many moles of calcium oxide are formed when 3 moles of calcium react with oxygen?
Answer:
3 moles of CaO
Explanation:
The chemical balanced equation is;
2Ca + O₂ → 2CaO
The ratio of calcium(Ca) to Calcium Oxide(Cao) in this equation is 2:2.
Now, when 3 moles of calcium react with oxygen, Cao produced will be;
3 moles of O₂ × 2 moles of CaO/2 moles of Cao = 3 moles of CaO
Which of the following organs produce enzymes that help chemical digestion happen?
A liver
B small intestine
C large intestine
D rectum
Answer:
A liver
B small intestine
What is the mass of 1.72 moles of sodium nitrate? Use the periodic table and the polyatomic ion resource.
Answer:
[tex]\boxed {\boxed {\sf 146 \ g \ NaNO_3}}[/tex]
Explanation:
To convert from moles to mass, the molar mass is used. This tells us the grams in 1 mole of a substance.
1. Write FormulaWe know the compound is sodium nitrate.
Sodium: NaNitrate: NO₃Sodium has an oxidation state of +1 and nitrate's is -1. When they bond, sodium gives an electron to nitrate and the charges balance out. We don't need to add any additional subscripts.
Sodium nitrate: NaNO₃2. Calculate Molar MassThe molar mass is found on the Periodic Table. It is the same as the atomic mass, but the units are grams per mole. Look up the values for the individual elements.
Na: 22.9897693 g/mol N: 14.007 g/mol O: 15.999 g/molNotice that in the formula, oxygen has a subscript of 3. We must multiply oxygen's molar mass by 3 before adding the other molar masses.
O₃: 3(15.999 g/mol)= 47.997 g/molNaNO₃= 22.9897693+14.007+ 47.997 = 84.9937693 g/mol3. Calculate MassUse the molar mass as a ratio.
[tex]\frac {84.9937693 \ g \ NaNO_3}{1 \ mol \ NaNO_3}[/tex]
Multiply by the given number of moles: 1.72
[tex]1.72 \ mol \ NaNO_3 *\frac {84.9937693 \ g \ NaNO_3}{1 \ mol \ NaNO_3}[/tex]
The units of moles of sodium nitrate cancel.
[tex]1.72*\frac {84.9937693 \ g \ NaNO_3}{1}[/tex]
[tex]146.1892832 \ g \ NaNO_3[/tex]
4. RoundThe original measurement of moles has 3 significant figures, so our answer must have the same. For the number we found, that is the ones place.
146.1892832The 1 in the tenths place tells us to leave the 6.
[tex]146 \ g \ NaNO_3[/tex]
1.72 moles of sodium nitrate has a mass of approximately 146 grams.
Suppose that the student took one more volume
reading of 24.2 mL but forgot to measure the
pressure.
Compute the pressure expected for that
volume. kg/cm2?
Answer:
2.13 Kg/cm².
Explanation:
We'll begin by calculating the constant that exist between the pressure and the volume. This can be obtained by using the Boyle's law equation as shown below.
Boyle's law states that
PV = K
Where
P is the pressure.
V is the volume.
K is the constant.
We shall determine the value of K as follow:
Pressure (P) = 1.15 Kg/cm²
Volume (V) = 44.8 mL
Constant (K) =?
PV = K
1.15 × 44.8 = K
K = 51.52 Kg/cm²•mL
Finally, we shall determine pressure, when the volume is 24.2 mL. This can be obtained as follow:
Volume (V) = 24.2 mL
Constant (K) = 51.52 Kg/cm²•mL
Pressure (P) =?
PV = K
P × 24.2 = 51.52
Divide both side by 24.2
P = 51.52 / 24.2
P = 2.13 Kg/cm²
Therefore, the pressure is 2.13 Kg/cm².
Which of the following statements is true?
Mushrooms and algae are part of the fungi group.
Fungi are a special type of plant.
Fungi can feed off both living and dead organisms.
Fungi can make their own food using photosynthesis.
Answer:
Mushroom and algae are part of the fungi group
Which of the following describes a crystal? *
A homogeneous solid
has a highly ordered microscopic structure
has a geometrically regular form
All of the options describe crystals
Answer:
has a highly ordered microscopic structure
How does the CO2 level affect photosynthesis?
Answer:
Elevated [CO2] increases the availability of carbon in leaves causing greater Rubisco activity and higher rates of photosynthesis. Greater photosynthesis increases the content of non-structural carbohydrates in leaves which can lead to greater starch reserves and increased auxin biosynthesis.
Explanation:
Hope it helps
FOLLOW MY ACCOUNT PLS PLS
Que representa en la reacción química
Na2SO4(s)+H2O(1)=
Answer: The given reaction is a double displacement reaction.
Explanation:
A chemical reaction equation in which both positive and negative ions of two different reactants are exchanged then it is called a double displacement reaction.
For example, [tex]Na_{2}SO_{4} + H_{2}O \rightarrow H_{2}SO_{4} + Na_{2}O[/tex]
Here, hydrogen ions of [tex]H_{2}O[/tex] are replaced by the sodium ions of [tex]Na_{2}SO_{4}[/tex]. Also, sulfate ion of [tex]Na_{2}SO_{4}[/tex] are replaced by oxygen ion of [tex]H_{2}O[/tex].
Thus, we can conclude that the given reaction is a double displacement reaction.
-what color is the tube
-is the reaction reversible
-has the reaction reached equilibrium
Answer:
-what color is the tube: Transparent
-is the reaction reversible: what reaction
-has the reaction reached equilibrium: I don't see a reaction
BTW you didn't provide all the information.
Given the data table below, which metal will take the least amount of
energy to increase its temperature?
metal. c(j/gk)
Al. 0.921
Ba. 0.201
Mg. 1.04
Ni. 0.502
K. 0.754
Answer:
Barium
Explanation:
The specific heat of a material is a property defined as the amount of energy required to increase the temperature of 1g of this material in 1°C = 1K
In this way, the metal that takes the least amount of energy to increase its temperature is the metal that has the lowest specific heat.
In the problem, this metal is Barium (Ba = 0.201J/gK)
Cuando se trata Ca3P2 con agua, los productos son Ca(OH)2 y PH3. Calcular el peso máximo obtenido al reaccionar 2 g de Ca3P2 con 1 g de H2O.
Answer:
0.629 gramos de PH3 es la máxima de cantidad que puede ser producida.
Explanation:
¡Hola!
En este caso, dado que tenemos la siguiente reacción química, la cual se puede balancear directamente:
[tex]Ca_3P_2+6H_2O\rightarrow 3Ca(OH)_2+2PH_3[/tex]
Podemos calcular la masa máxima de cualquier producto, digamos PH3, al comparar la masa de este, que 2 g the Ca3P2 y 1 g de H2O producen por separado y de acuerdo a la estequiometría:
[tex]2gCa_3P_2 *\frac{1molCa_3P_2 }{182.18gCa_3P_2 }*\frac{2molPH_3}{1molCa_3P_2 } *\frac{34gPH_3}{1molPH_3 } =0.747gPH_3\\\\1gH_2O *\frac{1molH_2O }{18.02gH_2O}*\frac{2molPH_3}{6molH_2O} *\frac{34gPH_3}{1molPH_3 } =0.629gPH_3[/tex]
De este modo, infermos que solamente 0.629 gramos the PH3 pueden ser obtenidos al ser el agua el reactivo límite.
¡Saludos!
15. If you dilute a 6 M solution of HCl from 5 mL to 50mL, what is the concentration of this new solution? (M1V1 = M2V2)
A) 1.6 M
B) 0.6 M
C) 8.6 M
D) 0.006 M
Answer:
B) 0.6M
Explanation:
I apologize in advance if it is not correct :l
The (M1V1= M2V2) is given for you to plug in the correct numbers so let's jot this down.
(M1*V1= M2*V2)
so they give us 6M which would be our (M1), from this we can also conclude that 5mL is also V1; ( if you notice the M1's and V1's are always found next to eachother). This leads us to our 50mL, this would be our V2 because the volume went from 5mL to 50mL. Now lets put this in order based on what we know.
M1= 6M (M1*V1= M2*V2)
V1= 5mL
M2= ?
V2= 50mL
now we plug in what we know into the equation to find the unknown (M2)
(6M*5mL= M2*50mL)
now we could do the long math, but I don't think your on brainly to do the hard way. so lets keep it simple!
We are going to put the 50mL under the (6M*5mL) for division.
[tex]\frac{(6M*5mL)}{(50mL)}[/tex] This is honestly MUCH easier, than manually answering. you just put that in the calculator and it'll give you B) 0.6M
honestly though I might not know what I'm doing cuz im currently doing my test and decided to answer this question ;)
Good Luck!
Which of these statements describes a difference between the mechanics of
airplane flight and rocket flight?
A. Airplanes must carry an oxidizer along with fuel.
B. Airplanes need only upward thrust as a force for flight.
C. Rockets need only upward thrust as a force for flight.
D. Rockets need air molecules from the atmosphere to generate
thrust
Answer:
C. Rockets need only upward thrust as a force for flight.
Explanation:
This is correct
Answer:
c
Explanation:
Gases in the atmosphere that trap heat energy are called
Answer:
Greenhouse Gases
Explanation:
Where is most of the high-level waste stored in the United States?
salt mines
at the nuclear reactor site
mountain peaks
the ocean
volcanic fissures
Answer:
at the nuclear reactor site
Explanation:
In the United States, liquid high-level waste is stored in underground tanks pending vitrification. High-level waste is stored at the nuclear reactor site.
Such waste was created by the weapons programs of the cold war and the Manhattan project. This waste can not be vitrified as there were not enough funds for further processing.
Answer:
at the nuclear reactor site
Explanation:
You are about to watch a video about a scientist who studies jellies like the one shown in this image. One thing she investigates is changes to the number of jellies living in an area. What ideas do you have about why the number of organisms in an area might increase?
The reason behind an increased population of any organism is a lack of predators, favorable habitat, good food source.
What are jellyfishes?Jellyfishes are umbrella-shaped, free-living marine animals.
They have long tentacles which are highly dangerous.
They are not true fishes.
The reasons for the increase in the number of organisms in an area:
Predators are animals who eat another small animal for their survival. If there is less number of predators of any organism, their population increase.
Favorable environmental conditions are another reason for the population increase of a population.
Food availability.
Thus, these are the reason for an increase in population.
Learn more about jellyfishes, here:
https://brainly.com/question/1397196
so2+o2 = so3 método de tanteo
Answer:
I dont understand
Explanation:
818191919
Which of the following statements describes how humans would be affected if the ozone layer of Earth’s atmosphere were very damaged?
A. People would not spend as much time indoors.
B. The amount of food people eat each year would increase.
C. Human skin would burn much faster even with less exposure to sunlight.
D. Plants and flowers would grow much larger and produce more oxygen for people to breathe.
i thank its B my big brother helped me we thank its b
grams. Number only, rounded to the
One mole of silver weighs
hundredths place (.01) *Y
Answer:
107.87 grams
Explanation:
One mole of silver weighs 107.87 grams .