How can you reduce the amount of waste you send to landfills?

Answers

Answer 1

Answer:

for reducing your landfill contribution

Reduce and reuse: The most obvious and easiest way to reduce your landfill contribution is by reducing and reusing as much as possible. ...

1,Recycle: ...

2,Compost: ...

3,Electric or gas dryer: ...

4,Drive less: ...

5,Reusable water bottle: ...

6,Plant a tree: ...

7,Recycle electronics

Answer 2

There are several ways you can reduce the amount of waste you send to landfills:

Reduce your consumption: One of the most effective ways to reduce waste is to simply consume less. This can involve reducing your use of single-use plastics, choosing products with minimal packaging, and opting for products that are made to be reused or recycled.

Recycle: Recycling is a process that converts waste materials into new products. By recycling, you can help to conserve natural resources and reduce the amount of waste that goes to landfills.

Compost: Composting is the process of breaking down organic material, such as food waste and yard trimmings, into a soil-like substance called compost. This can be used to enrich the soil and help plants grow.

Donate or sell gently used items: Rather than throwing away gently used items, consider donating them to a thrift store or selling them online. This can help to extend the life of these items and reduce the amount of waste that ends up in landfills.

Reuse: Look for ways to reuse items rather than throw them away. For example, you can use a reusable water bottle instead of disposable plastic bottles, or bring a reusable bag to the grocery store instead of using plastic bags.

Learn more about Chemical landfills here: https://brainly.com/question/9085477


Related Questions

Help me! Who ever gets to answer and has the best answer gets brainliest (very easy!)

Answers

Fire-3
Decay-1
Earth-2

Answer:

Fires --> These consume fuel and convert chemical energy stored in that fuel into thermal light and sound energy.

Decay -->The breakdown of dead plants and animals releases thermal energy.

Earth --> Thermal energy comes from deep inside and it is called geothermal energy.

If a compressed air cylinder for scuba diving contains 6.0 L of gas at 18°C and 200 atm pressure, what volume does the gas occupy at 1.0 atm and 25°C?​

Answers

Answer:

[tex]V_2=1228.9L[/tex]

Explanation:

Hello there!

In this case, given the pressure, temperature and volume of the gas, we notice that we need the combined ideal gas as shown below:

[tex]\frac{P_2V_2}{T_2} =\frac{P_1V_1}{T_1}[/tex]

Thus, solving for the final volume, V2,  we would obtain:

[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]

Now, we plug in the data and make sure the temperature must be in Kelvins to obtain:

[tex]V_2=\frac{200atm*6.0L*(25+273)K}{(18+273.15)K(1.0atm)}\\\\V_2=1228.9L[/tex]

Best regards!

Help me! Who ever gets to answer and has the best answer gets brainliest

Answers

Answer:

Decay-the breakdown of dead plants..

Earth- thermal energy comes from deep inside...

Fires- these consume feul...

Explanation:

Answer:

Fires - These consume fuel and covert chemical energy stored in that fuel into thermal, light and sound energy

Decay - The breakdown of dead plants and animals produces thermal energy

Earth - Thermal energy comes from deep inside and is called geothermal energy

Explanation:

Fires, when you burn wood, you convert chemical energy from the wood into thermal (warmth from the fire), light (glow from the fire), sound (crackling sound of wood burning)

Decay - I can't explain that one to you but there are power plants that use decomposition to produce energy

Earth - Beneath the crust there is the mantle, which consists of molten rock which produces a lot of thermal energy. This can be seen in geysers, where the molten rock heats water and hot water can burst out of the surface. Applies to hot springs too

Which substance is soluble in water?

Answers

Things like salt, sugar and coffee dissolve in water. They are soluble. They usually dissolve faster and better in warm or hot water. Pepper and sand are insoluble, they will not dissolve even in hot water.

A student is heating a crystal of alum to
determine the hydrate formula. If she removes
it from the heat before all the water has been
removed, what will happen to the calculated
hydrate formula?
A. It will not be affected by the error.
B. The mole ratio will indicate less water than was
actually present.
C. The mole ratio Will indicate less alum than was
actually present.

Answers

I think It’s probably a

What would happen to the position of the equilibrium when the following changes are made to the reaction below?
2HgO(s) ↔ Hg(l) + O2(g)

1.) The pressure on the system decreases.

Answers

Any impact on pressure will only affect gas molecules. So in this question the reactant has 0 gas molecules and the products have 1 gas molecule (the O2 molecule).

This means when you decrease the pressure the equilibrium will shift in order to oppose this change.

As you decreased the pressure it will move to the reaction that will increase the pressure back to equilibrium. So if you decrease pressure the equilibrium will shift to the right hand side (forward reaction) to oppose the change in pressure and a higher yield of Hg(l) and O2(g) will be produced.

.....plllzzz heeelp me fast?? ​

Answers

Answer:

Explanation:

It is 11

It’s 11 dndndnenddnnenrfjdnnrfnnd

A student prepared a stock solution by dissolving 20.0 g of NaOH in enough water to make 150. mL of solution. She then took 15.0 mL of the stock solution and diluted it with enough water to make 65.0 mL of a final solution. What is the concentration of NaOH for the final solution

Answers

Answer:

[tex]0.769\ \text{M}[/tex]

Explanation:

Mass of stock solution = 20 g

Molar mass of NaOH = 40 g/mol

Volume of stock solution = 0.150 mL

[tex]M_2[/tex] = Concentration of NaOH for the final solution

[tex]V_1[/tex] = Amount of stock solution taken = 15 mL

[tex]V_2[/tex] = Total volume of solution = 65 mL

Molarity is given by

[tex]M_1=\dfrac{\text{Mass}}{\text{Molar mass}\times \text{Volume}}\\\Rightarrow M_1=\dfrac{20}{40\times 0.15}\\\Rightarrow M_1=\dfrac{10}{3}[/tex]

We have the relation

[tex]M_1V_1=M_2V_2\\\Rightarrow M_2=\dfrac{M_1V_1}{V_2}\\\Rightarrow M_2=\dfrac{\dfrac{10}{3}\times 15}{65}\\\Rightarrow M_2=0.769\ \text{M}[/tex]

The concentration of NaOH for the final solution is [tex]0.769\ \text{M}[/tex].

A gas goes from 1L at 273 K to 2 L when heated. What is the new temp?

Answers

Answer:

Given : Diatomic molecule at 273K

'q' absorbed = positive = +100Cal = 100 x 4.184J = 418.4J

'W' done by system = negative = -209J

By first law of thermodynamics;

ΔU = q + W = 418.4 + (-209) = 209.4J

We know for diatomic molecule Cv=25R and CvΔT=ΔU

CvΔT=209.4

 25RΔT=209.4

ΔT=5R209.4×2

And, Heat exchange=Cm×ΔT 

where; Cm is molar heat capacity

Cm=ΔTHeat Exchange

substituting values for Heat Exchange = 418.4 and ΔT=5R209.4×2

Cm=5R

Which describes bonding electrons in a polar covalent bond?


electrons that are not shared equally

electrons that are shared in diatomic molecules

electrons that are shared equally

Answers

Answer:

I think the third one

Explanation:

i think

Answer:

electrons that are NOT shared equally

Explanation:

Chlorofluorocarbons may be harming the ozone layer by ____.
a.
adding more ozone molecules
c.
destroying ozone molecules
b.
blocking ultraviolet radiation
d.
adding carbon dioxide molecules


Please select the best answer from the choices provided

Answers

Answer:

The awnser is C. Hope that helps!!!

.) Neon and HF have approximately the same molecular masses. a.)Explain why the boiling points of Neon and HF differ b.)Compare the change in the boiling points of Ne, Ar, Kr, and Xe with the change of the boiling points of HF, HCl, HBr, and HI, and explain the difference between the changes with the increasing atomic or molecular mass.

Answers

Answer:

See explanation

Explanation:

a) The magnitude of intermolecular forces in compounds affects the boiling points of the compound. Neon has London dispersion forces as the only intermolecular forces operating in the substance while HF has dipole dipole interaction and strong hydrogen bonds operating in the molecule hence HF exhibits a much higher boiling point than Ne though they have similar molecular masses.

b) The boiling points of the halogen halides are much higher than that of the noble gases because the halogen halides have much higher molecular masses and stronger intermolecular forces between molecules compared to the noble gases.

Also, the change in boiling point of the hydrogen halides is much more marked(decreases rapidly)  due to decrease in the magnitude of hydrogen bonding from HF to HI. The boiling point of the noble gases increases rapidly down the group as the molecular mass of the gases increases.

You have to prepare a pH 5.00 buffer, and you have the following 0.10 M solutions available: HCOOH (pka=3.74), HCOONa, CH3COOH (pka=4.74), CH3COONa, HCN (pka=9.31), and NaCN. Which solutions would you use?

Answers

Answer:

CH3COOH - CH3COONa since its pKa is closest to the required pH.

Explanation:

Hello there!

In this case, in agreement with the theory of buffers as solutions able to withstand severe pH changes due to the addition of acidic or basic substances, it is possible to set up a generation equilibrium expression for the acids herein given:

[tex]Ka=\frac{[A^-][H_3O^+]}{[HA]}[/tex]

Which leads to the Henderson-Hasselbach equation:

[tex]pH=pKa+log(\frac{[A^-]}{[HA]} )[/tex]

Thus, since all the buffers have [A-]=[HA]=0.10M, the log part becomes 0 and therefore the best buffer will have the closest pKa to the required pH, which is CH3COOH - CH3COONa since its pKa is 4.74.

Best regards!

[tex]CH_3COOH\; and\; CH_3COONa[/tex] can be used to prepare a pH buffer, if 0.10 M solution available of the solutions.

What is buffer?

Buffer is a solution, that resist change in pH, by adding or removing H+ ions to the solution.

Maintaining a constant pH is necessary to complete many reactions.

In blood, bicarbonates maintain the pH of the body.

[tex]CH_3COOH\; and\; CH_3COONa[/tex] have approx the nearest pH, so they can be used to make a buffer.

Thus, the correct options are [tex]CH_3COOH\; and\; CH_3COONa[/tex]

Learn more about buffer

https://brainly.com/question/24188850

How do chemists count the number of representative particles in a substance?

Answers

The mole allows chemists to count the number of representative particles

29. Which is the electron configuration of an atom
in the excited state?
(1) 1s 2s²2p2
(2) 1s 2s22p'
(3) 1s 2s22p5352
(4) 1s²2s²2p%35'

Answers

2 is right am 70 percent sure

2Na(s) + Cl2(g) - 2NaCl(s) + 822 kj

Answers

Answer:

Is there any other part to this question? If not I'm pretty sure the answer is 205.5 kJ

Explanation:

Answer:

822 kJ; 411 kJ/mol.

Explanation:

A chemist measures the enthalpy change during the following reaction: ()()()Use this information to complete the table below. Round each of your answers to the nearest kJ/mol. 1. ()()()Solution:  given reaction is 2Na + Cl2 --> 2NaCl         delta H = -822 KJ 1) 1/2Na + 1/4Cl2 --> 1/2NaCl divide the coficiant of given.

Reactants for a certain reaction are combined in a solution. Which solution
would have the most successful collisions and so enable the reaction to
proceed quickly?
A. A solution at low concentration and low temperature
B. A solution at high concentration and low temperature
O C. A solution at high concentration and high temperature
D. A solution at low concentration and high temperature

Answers

The correct answer is solution B!

The gases are contained in a reaction vessel and are in equilibrium at 298 K

X2Zi â 2XZ2(g)


a. Activation energy
b. Total mass of the system
c. Molar concentration of XZ4(g)
d. Number of molecules present
e. Equilibrium constant

1. Is decreased by the addition of a catalyst?
2. Is decreased when the volume of the reaction vessel is increased and equilibrium is reestablished at 298 K?

Answers

Answer:

1) Activation energy  ( A )

2) Molar concentration of X[tex]_{2}[/tex]Z[tex]_{4}[/tex](g) ( C )

Explanation:

X[tex]_{2}[/tex]Z[tex]_{4}[/tex](g) ⇄ 2XZ

1) Activation energy Is decreased by the addition of a catalyst

while Equilibrium constant will Increase and other options will still remain unaffected

2)Molar concentration of X[tex]_{2}[/tex]Z[tex]_{4}[/tex](g) Is deceased when the volume of the reaction vessel is increased and equilibrium is reestablished at 298 K

while Number of molecules present will Increase

Calculate the pH of a 0.10 M NH4Cl solution.

Answers

Answer:

Answer: pH = 2.72

Explanation:

Calculate the pH of 0.010 M HNO2 solution. The K, for HNO2 is 4.6 x 104 

What is mass times acceleration equal to?

Answers

Answer:

Mass (kg) × Acceleration (m/s²) = Force (N)

Newton's second law of motion is F = ma, or force is equal to mass times acceleration.

What is the hydronium ion concentration of a solution whose pH is 4.12?
a. 5.1 x 10–6 M
b. 7.6 x 10–5 M
c. 6.4 x 10–5 M
d. 4.4 x 10–8 M

Answers

A is may be the correct answer

how many grams of silver chloride are produced from 15.0 g of silver nitrate​

Answers

Answer:

4.2 g

Explanation:

Which statement defines enzymatic activity? Enzymes are required to slow down biological reactions within cells. Specific enzymes can catalyze a wide variety of chemical reactions. Enzymes regulate cellular functions through feedback mechanisms. Enzymes bind substrates so that reactive groups have many different orientations.

Answers

Answer:

Enzymes are required to slow down biological reactions within cells,

this could be not sure

Answer:

D

Explanation:

Enzymes bind substrates so that reactive groups have many different orientations.

what is one property of skim milk indicating that it is a colloidal dispersion?​

Answers

Answer:

it's dairy

Explanation

2. A chemical's flash point is the​

Answers

Flash point is the minimum temperature at which a liquid forms a vapor above its surface in sufficient concentration that it can be ignited.

In what form metals are found in nature

Answers

Answer:

Metals in nature are found in rock form, mineral forms etc..

Answer:

Metals are found in rock

For each of the environments below: (1) identify your system and surroundings and (2) predict whether it would be endothermic or exothermic.a.Wood burningSystem:Surroundings:Enthalpy Change:b.Water freezingSystem:Surroundings:Enthalpy Change:c.Sweat evaporatingSystem:Surroundings:Enthalpy Change:d.Chemical hand-warmerSystem:Surroundings:Enthalpy Change:

Answers

Answer:

A) Wood burning

system : Wood.

surroundings : atmosphere

Enthalpy : Exothermic

B) Water Freezing system

System : Refrigerator

surroundings :  water in the refrigerator

enthalpy change : Endothermic

C) Sweat evaporating

System :  Human being

surroundings : Air nearby

Enthalpy change : exothermic

D) Chemical Hand-warmer

system : Hand warmer pack

Surroundings : human palms

Enthalpy Change : Exothermic

Explanation:

A) Wood burning

system : Wood

surroundings : atmosphere

Enthalpy : Exothermic

This system give away energy to its surroundings hence its enthalpy change is exothermic

B) Water Freezing system

System : Refrigerator

surroundings :  water in the refrigerator

enthalpy change : Endothermic

The system absorbs heat from what is put inside(surroundings ) of it hence this is na endothermic system

C) Sweat evaporating

System :  Human being

surroundings : Air nearby

Enthalpy change : exothermic

This is an exothermic reaction ( enthalpy change ) because the system gives out heat to the surrounding

D) Chemical Hand-warmer

system : Hand warmer pack

Surroundings : human palms

Enthalpy Change : Exothermic

There is movement of heat from the system to the surrounding hence it is an exothermic reaction

- Rachel performed an investigation to study the thermal conductivity of four different materials. She started with four identically shaped rods—each made of a different material. Then, she placed one end of each rod into a pot of boiling water, which was at 100°C.

- After five minutes, Rachel measured the temperatures of the ends of the rods that were sticking up out of the pot to see whether they got hot. Her results are shown below.

Thermal Conductivity Investigation
Material Temperature of End of Rod After 5 Minutes
Material 1 41°C
Material 2 53°C
Material 3 98°C
Material 4 59°C

- Rachel knows that one of the materials is copper and that copper conducts thermal energy very well. Which of the materials is most likely copper?


A.
material 1
B.
material 3
C.
material 4
D.
material 2

Answers

Answer:

I will have the maths book

Answer:98

Explanation:

6. Menthol is a member of the terpene family of natural products. It exists in a (1R, 2S, 5R) form and a (IS, 2R, 5S) form. Are these two compounds enantiomers or diastereomers?
​​

Answers

Here ya go if you need the link we’re I found this answer key https://studylib.net/doc/8708211/exam-2---chemistry

A reaction has a theoretical yield of 27.6 g. When the reaction is carried out, 13.4 g of the product is obtained. What is the percent yield?

A) 48.6 %
B) 206 %
C) 370 %
D) 64.7 %

Answers

I believe it’s A

13.4 is 48.6% of 27.6

Answer:

yee I'm excellent in maths and science

Other Questions
Do you have todescribe each nounin a sentence? CAN SOMEONE HELP ME WITH THIS PLZ! Who helped forge Germany into a single nation? Giuseppe Garibaldi Mohandas Gandhi Otto von Bismarck Giuseppe Mazzini Question 7 of 10Which story element most clearly shows direct characterization?O A. The way a character dressesO B. The narrator's comments about a character's true natureC. A character's private thoughts and feelings while aloneO D. How other characters act when a specific character is aroundSUBMIT What is the primary source of energy for all food chains?? A force of 50N on a particle of mass 'm' the particles starts from rest and travels in a straight line through a distance of 25m in 5 seconds what is the mass of the object The following types of contracts should be in writing: Contracts involving interests in land. Contracts that cannot, by their terms, be Select within one year from the day after the date of formation. Select or secondary, contracts, such as promises to answer for the debt or duty of another. Promises made in Select of marriage. Under the Uniform Commercial Code, contracts for the sale of goods priced at Select or more. An 886 mL sample of Neon gas is at 752 torr and 299 K. What will be the new volume if, with the pressure and amount of gas held constant the temperature is increased to 371 K? Brainliest if helping How did the treaties ending World War I sow the seeds for future conflict? *Don't get it from a website* Where does The energy come from to heat the oceans what sentence about kepler-22b is not supported by facts in the passage What happens when a neutral atom gains an electrons? Why did the United States and Soviet Union negotiate the SALT I and SALT II treaties?to stimulate the Soviet Unions economyto reduce tensions between the two countriesto encourage the two countries to spend less on their militariesto encourage the Soviet Union to allow greater freedom of speech Please help me.... I didn't understand the question HS: Algebra 2A [M] (Prescriptive) (GP)/ 5 Quadratic Functions2. Determine whether the function is linear or quadratic. Identify the quadratic, linear, and constant terms.y=(x - 5)(5x+4)-5x?linear functionlinear term: 15xconstant term: -25quadratic functionquadratic term: 5x?linear term: 15xconstant term: -25quadratic functionquadratic term: -5x?linear term: -21%constant term: -20linear functionlinear term: -21xconstant term: -20Congratulations! You have shown ocompleting one or more activities. Iunchack Hide excused activities !!HELP !! BRAINLEST!!!!IMPARFAIT Choose the correct form of the verb according to the context of the statement.Je ___ au march quand j'ai vu un oiseau.O allais O vaisQuand j'tais petit , j' ___ trs timide. O avaisO etais Sophie et ses copines ___ a la poupe, comme toujoursO jouaientO jouent Seismologists use the Richter scale to express the energy, or magnitude, of an earthquake. The Richter magnitude of an earthquake, M, is relatedenergy released in ergs E shown by the formulaMflog (10)A recent earthquake in Peru registered a 4.0 on the Richter scale. How much energy in ergs was released by this earthquake?(Enter you answer in terms of 10 and use Shift 6^ for exponents)ergs Who kno this songShorty Be MineSong by Pretty Ricky PLZS HELP NEED BY TODAY!!