How did buddhism influence east asian arts and crafts.

Taking into account the Doppler efect, the speed of the bat is closest to 5.02 [tex]\frac{m}{s}[/tex].

The Doppler effect is defined as the apparent frequency change of a wave produced by the relative movement of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave motion when the sender and receiver, or observer, move relative to each other.

The following expression is considered the general case of the Doppler effect:

[tex]f1=f\frac{v+-vR}{v+-vE}[/tex]

Where:

In the numerator if the receiver approaches the sender

In the denominator if the sender moves away from the receiver

In the numerator if the receiver moves away from the emitter

In the denominator if the sender approaches the receiver

In this case, a bat emits a sound at a frequency of 3.00×10⁴ Hz= 30,000 Hz as it approaches a wall.

The bat detects beats such that the frequency of the echo is 900 hz higher than the frequency the bat is emitting.

So, you know:

Replacing in the expression is considered the general case of the Doppler effect:

[tex]30900 Hz=30000 Hz\frac{340 \frac{m}{s} +vbat}{340\frac{m}{s} -vbat}[/tex]

Solving:

[tex]\frac{30900 Hz}{30000 Hz} =\frac{340 \frac{m}{s} +vbat}{340\frac{m}{s} -vbat}[/tex]

[tex]1.03=\frac{340 \frac{m}{s} +vbat}{340\frac{m}{s} -vbat}[/tex]

1.03×( 340[tex]\frac{m}{s}[/tex] -vbat)= 340 [tex]\frac{m}{s}[/tex] + vbat

1.03×340[tex]\frac{m}{s}[/tex] - 1.03×vbat= 340 [tex]\frac{m}{s}[/tex] + vbat

350.2[tex]\frac{m}{s}[/tex] - 1.03×vbat= 340 [tex]\frac{m}{s}[/tex] + vbat

350.2[tex]\frac{m}{s}[/tex] - 340 [tex]\frac{m}{s}[/tex]= vbat + 1.03×vbat

10.2 [tex]\frac{m}{s}[/tex]= 2.03×vbat

10.2 [tex]\frac{m}{s}[/tex]÷ 2.03 = vbat

5.02 [tex]\frac{m}{s}[/tex]= vbat

In summary, the speed of the bat is closest to 5.02 [tex]\frac{m}{s}[/tex].

Learn more about the Doppler effect:

From the options given, the only option which would result on having a reduced error margin, is to increase the sample size.

Recall :

Margin of Error = Zcritical × σ/√n

Hence, only the sample size will cause a decrease in the margin of error of the interval.

Learn more : https://brainly.com/question/25569754

Answer:

By their names. If the names are not known you should mark them as speaker 1, speaker 2, speaker 3, etc.

Explanation:

Answer: Phase I results in two diploid daughter cells and phase II results in four diploid daughter cells

Explanation:

i took the test

...

Thats really nice

Answer:  hums 202 Which of the following describes a consumer installment loan? A. A loan you get based on the tax refund that you expect to receive. B. A loan that is repaid in equal monthly payments for a specific period of time, usually several years. C. A loan where you have to promise to give the bank your assets if you do not repay the loan. D. A loan for consumer goods where you own the item(s) at the end of the payment period.

Explanation: all you have to do is search up the answer to this on brainly

Do you ever wish your dreams could come true?

Dream of things that won't make you boo.

Dreams can come real,

just make sure you make them feel.

If it's a nightmare make sure you hide up the back stairs,

and if it's a good dream make sure you make it seen.

So I really wish dreams were real,

that way I could start to feel.

Explanation: Sorry it isn't that good I did the best I could. It's also rrrreeeealllllllyyyyy short sooo.......

Answer:

T-Shirt Cost = £7

Hat Cost = £3

Explanation:

Important Information:

4 t-shirts and a hat costs £31.00

2 t-shirts and a hat costs £17.00.

Here we assume t-shirt be x and hat be y.

Explanation/Solution:

Based on the above information, the calculation is as follows:

4x + y = 31

2x + y = 17

Now subtract equation 2 from 1

2x = 14

x = 7

So y is

4(7) + y = 31

28 + y = 31

y = 3

Therefore we can conclude that The t-shirt cost £7 and Hat cost £3.

A ratio which estimates the risk associated with investing in a business firm is called: solvency ratio.

Solvency ratio can be defined as a key metric that is typically used to measure the ability of a business firm to meet its long-term debt obligations.

Basically, a solvency ratio measures the financial position of a business firm and the extent to which its assets cover long-term debt obligations (commitments), especially for future payments and the liabilities.

In conclusion, a ratio which estimates the risk associated with investing in a business firm is called solvency ratio.

Read more: https://brainly.com/question/16352505

Answer: potassium sulfate

Explanation:

It should be noted that the working capital will be $1584000, the current ratio is 2.80 while the quick ratio is 2.20.

From the complete information, the working capital is calculated thus:

= Current asset - Current liabilities

= 2464000 - 880000

= 1584000

The current ratio will be:

= Total current asset / Total current liabilities

= 2464000 / 880000

= 2.80

The quick ratio will be calculated thus:

Total current asset = 2464000

Less: Inventory = 420000

Less: Prepaid expenses = 108000.

Total quick assets = 1936000

Total current liabilities = 8800000

Quick ratio = 2.20

Learn more about quick ratio on:

https://brainly.com/question/5651245

Considering the situation described in the question, the type of sample Inspector used is called Simple Random Sampling

Simple Random Sampling is a random sampling technique in which participants are taken randomly from a given population.

Here, the given population is the hospital chain with multiple locations; since the inspector only randomly selects some of their locations, this is a simple random sampling.

Hence, in this case, it is concluded that the correct answer is Simple Random Sampling

Learn more about Random Sampling here: https://brainly.com/question/17831271

Answer:

12

Explanation:

speed=distance÷time

Answer:

Third option: Folding

Explanation:

When the movement of tectonic plates causes stress and pressure on a rock, and it bends, it is called folding.

Hope this helps :)

The expression that represents the difference of squares for this situation is [tex]x^2-c^2[/tex]

Given the generic x by x grid has c blocks moved to create an (x-c) by (x+c) grid, to get the difference of two squares, we will take the product of the expressions as shown:

[tex]=(x-c)(x+c)\\=x^2+xc-xc-c^2\\=x^2 -0-c^2\\=x^2-c^2[/tex]

Hence the expression that represents the difference of squares for this situation is [tex]x^2-c^2[/tex]

Learn more here: https://brainly.com/question/11084694

Stokes' theorem says that the surface integral of the curl of the vector field F across the surface S is equal to the line integral of F along the boundary of S.

In this case, the boundary is a circle in the x,y-plane with radius 2. (To see this, set z = 0 and rearrange the equation for the paraboloid as x² + y² = 4.)

Then

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s = \int_{\partial S} \vec F \cdot d\vec r[/tex]

where

[tex]\vec r = 2\cos(t) \,\vec\imath + 2\sin(t) \,\vec\jmath[/tex]

parameterizes the circular boundary of S with 0 ≤ t ≤ 2π. Then

[tex]d\vec r = \dfrac{d\vec r}{dt}\,\dt = (-2\sin(t)\,\vec\imath + 2\cos(t)\,\vec\jmath)\,dt[/tex]

and the integral becomes

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s = \int_{\partial S} \vec F \cdot d\vec r[/tex]

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s = \int_0^{2\pi} \vec F(\vec r(t)) \cdot \frac{d\vec r}{dt}\,dt[/tex]

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s \\= \int_0^{2\pi} ((2\cos(t))^2 \sin(0)\,\vec\imath + (2\sin(t))^2\,\vec\jmath + (2\cos(t))(2\sin(t))\,\vec k) \cdot(-2\sin(t)\,\vec\imath + 2\cos(t)\,\vec\jmath)\,dt[/tex]

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s = \int_0^{2\pi} 8\sin^2(t)\cos(t) \, dt[/tex]

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s = \int_0^{2\pi} 8\sin^2(t) \, d(\sin(t))[/tex]

[tex]\displaystyle \iint_S (\nabla\times\vec F)\cdot d\vec s = \frac83 (\sin^3(2\pi)-\sin^3(0)) = \boxed{0}[/tex]

Answer:

does not,

does not,

and has not

Explanation:

Dark matter doesn't absorb light, doesn't emit radiation and has not been observed directly.

Dark matter can be defined as often invisible substances that are difficult to spot and observed because they don't absorb, emit or reflect light.

This ultimately implies that, dark matter doesn't affect human view because they do not interact or interfere with electromagnetic radiation.

However, humans can see through the (weakly interacting) dark matter but it has not been observed directly by scientists and astronmers.

Read more on dark matter here: https://brainly.com/question/20339321

#SPJ2

Answer It's D (1924 - 1929)

hope this helps :)

Explanation: edge 2023

Based on the given value of sample size and the population standard deviation, the required test for the null hypothesis is the Z test of population mean.

Learn more : https://brainly.com/question/25576166

Answer:

Yes every cell undergoes mitosis

Greek Mythology is simply described as different kinds of stories about the gods, goddesses, etc., of Ancient Greeks. The word halcyon originate from a Greek legend is described below;

As a result of the calmness of the waters, halcyon therefore means having a sense of peace or tranquility.

Conclusively, In Greek mythology, there is a goddess Halcyon who is also called Alcyone in Greek. She is known as the daughter of Aeolus, the ruler of the winds.

Learn more about Greek words from

https://brainly.com/question/1481538

Answer:

carbon

Explanation:

yes

Examples of sustainable technology include:

Sustainable technology is a form of technology that have a positive social, economic or environmental impact. Sustainable technologies are innovations with positive impacts with the aim of reducing the negative impact humanity have created on earth.

Examples of sustainable technology include:

Find out more at: https://brainly.com/question/2991944

Answer:

like hw

Explanation:

It looks like the integral is

[tex]\displaystyle \int_C xy \, dx + x^2y^3 \, dy[/tex]

Let's close the loop by adding a line integral over the line segment joining (1, 4) to (0, 0). Then the closed loop is the triangular region

T = {(x, y) : 0 ≤ x ≤ 1 and 0 ≤ y ≤ 4x}

Since the integrand has no singularities over or on the boundary of T, we have by Green's theorem

[tex]\displaystyle \int_C xy \, dx + x^2y^3 \, dy = \iint_T \left(\frac{\partial(x^2y^3)}{\partial x} - \frac{\partial(xy)}{\partial y}\right) \, dx \, dy = \int_0^1 \int_0^{4x} (2xy^3 - x) \, dy \, dx[/tex]

Compute the double integral:

[tex]\displaystyle \int_0^1 \int_0^{4x} (2xy^3 - x) \, dy \, dx = \int_0^1 \int_0^{4x} \left(128x^5 - 4x^2\right) \, dx = \frac{60}3[/tex]

From this result, we subtract the line integral over the extra line segment we added. Parameterize this path by

C' : {(1 - t, 4 - 4t) : 0 ≤ t ≤ 1}

The line integral over C' is

[tex]\displaystyle \int_{C'} xy \, dx + x^2y^3 \, dy = \int_0^1 (1-t)(4-4t)(-dt) + (1-t)^2(4-4t)^3(-4\,dt)[/tex]

[tex]\displaystyle \int_{C'} xy \, dx + x^2y^3 \, dy = \int_0^1 \left(256 t^5-1280 t^4+2560 t^3-2564 t^2+1288 t-260 \right) \, dt = -44[/tex]

so that the line integral over C alone is 60/3 - (-44) = 64.

Answer:

probaly awnser C

Explanation:

or B or a

The character trait that defines the boy in Casabianca is: his loyalty.

Casabianca is the name of the young boy who is one of the major character sin "Casabianca".

In Casabianca, the boy, out of loyalty and having a strong sense of duty, had to put up bravery to remain at his post on a French ship that caught fire during the attack of the British.

In spite of the obvious dangers, he remained at his post while waiting for orders from the captain (his dad).

Therefore, the character trait that defines the boy in Casabianca is: his loyalty.

Learn more here:

https://brainly.com/question/11992416

Considering the definition of enthalpy of vaporization, the amount of heat that would be involved in condensing 15.8 g of CH₃OH is 18.8 kJ.

When a material changes phase from solid to liquid, or from liquid to gas, a certain amount of energy is involved in this phase change.

In case of phase change from liquid to gas, this amount of energy is known as enthalpy of vaporization (symbolized as ∆Hvap).

So, the enthalpy of vaporization is the amount of energy required to change a unit of mass (for example, moles or kg) of a substance from phase liquid to phase gas at constant temperature and pressure.

In this case, you know that enthalpy of vaporization is ∆Hvap = 38.0 kJ/mol.

On the other side, you want to vaporize 15.8 g of CH₃OH.  Then, being the molar mass of the compound 32 [tex]\frac{g}{mole}[/tex] (that is, the amount of mass contained in one mole), the number of moles to be vaporized is:

[tex]15.8 gramsx\frac{1 mole}{32 grams} =0.49375 moles[/tex]

Then, the amount of heat that would be involved in condensing 15.8 g of CH₃OH is calculated taking into account the enthalpy of vaporization by:

0.49375 moles× 38.0 [tex]\frac{kJ}{mol}[/tex]= 18.76 kJ ≅ 18.8 kJ

Finally, the amount of heat that would be involved in condensing 15.8 g of CH₃OH is 18.8 kJ.

Learn more:

Explanation:

density = mass / volume

96.4 g of aluminum / volume = 2.7

therefore,

96.4 = 2.7 × volume

volume = 96.4 / 2.7 = 35.7037037... ml

back to iron :

7.87 = mass / 35.7037037...

mass = 7.87 × 35.7037037... = 280.9881481... g

it would be 280.9881481... g of iron in the same volume.