Answer:
it allow us to compare the amount of energy passing through each tropical level over a period of time
Using this chemical stoichiometry, determine the number of moles of carbonic acid that can be produced from 2 mol NaHCO3 and 7 mol HCl.
Answer:
reaction is NaHCO3 + HCL = H2CO3 + NaCl
the ratios are 1:1
the 8 moles of HCl are in excess
so if you use 4 moles of NaHCO3 then you will obtain 4 moles of carbonic acid
hope that helps
Explanation:
The partial pressure of CO2 gas in a bottle of carbonated water is 4.60 atm at 25 ºC. How much CO2 gas (in g) will be released from 1.1 L of the carbonated water when the partial pressure of CO2 is lowered to 1.28 atm? At 25 ºC, the Henry’s law constant for CO2 dissolved in water is 1.65 x 103 atm, and the density of water is 1.0 g/cm3.
If the partial pressure of CO₂ in a bottle of carbonated water decreases from 4.60 atm to 1.28 atm, the mass of CO₂ released is 0.265 g.
The partial pressure of CO₂ gas in a bottle of carbonated water is 4.60 atm at 25 ºC. We can calculate the concentration of CO₂ using Henry's law.
[tex]C = k \times P = \frac{1.65 \times 10^{-3} M }{atm} \times 4.60 atm = 7.59 \times 10^{-3} M[/tex]
We can calculate the mass of CO₂ in 1.1 L considering its molar mass is 44.01 g/mol.
[tex]\frac{7.59 \times 10^{-3} mol}{L} \times 1.1 L \times \frac{44.01 g}{mol} = 0.367 g[/tex]
Now, we will repeat the same procedure for a partial pressure of 1.28 atm.
[tex]C = k \times P = \frac{1.65 \times 10^{-3} M }{atm} \times 1.28 atm = 2.11 \times 10^{-3} M[/tex]
[tex]\frac{2.11 \times 10^{-3} mol}{L} \times 1.1 L \times \frac{44.01 g}{mol} = 0.102 g[/tex]
The mass of CO₂ released will be equal to the difference in the masses at the different pressures.
[tex]m = 0.367 g - 0.102 g = 0.265 g[/tex]
If the partial pressure of CO₂ in a bottle of carbonated water decreases from 4.60 atm to 1.28 atm, the mass of CO₂ released is 0.265 g.
Learn more: https://brainly.com/question/18987224
The partial pressure of CO₂ gas in a bottle of carbonated water is 4.60 atm at 25 ºC. How much CO₂ gas (in g) will be released from 1.1 L of the carbonated water when the partial pressure of CO2 is lowered to 1.28 atm? At 25 ºC, the Henry’s law constant for CO₂ dissolved in water is 1.65 x 10⁻³ M/atm, and the density of water is 1.0 g/cm³.
Explain how signals are processed and stored by the brain.
[tex] \: \: \: \: [/tex]
Neurons communicate with each other by sending chemical and electrical signals. Each neuron is connected with other neurons across tiny junctions called “synapses”. Impulses rush along tiny fibres, like electrical wires, from one neuron to the next. Electrical impulses travel through neuronshope it helps[tex] \: \: \: \: \: \: \: [/tex]
how many moles of s atoms are in 1 mol of CaSO4
I think u asked for the atoms of sulfur? its 4..
Explanation:
calcium = 4
sulfur = 4
oxygen = 4
I hope this is correct
(100 POINTS!!!!) In one to two sentences, describe the process by which the ionic compound, LiCl, would dissolve in the polar solvent, CH3COCH3
Answer:
LICL as an Ionic compounds has covalent ability and they are soluble in polar solvent such as CH3COCH3 but they are insoluble in non-polar solvents. Due to their polarity, CH3COCH3 will decreases the electrostatic forces of attraction thereby resulting in free ions in aqueous solution.
Water is the known as a polar solvent that can dissolve an ionic compounds very easy and as a polar solvent, the arrangement of oxygen and hydrogen atoms in water is in bent shape.
Ionic compounds like LICL that is very polar is soluble in the polar solvent water.
Polar solvents like CH3COCH3 will dissolve polar and ionic solutes because of the attraction of the opposite charges on the solvent and solute particles.
Learn more from
https://brainly.com/question/25422160
Explanation:
Which of the four is least like the other three? A)Platinum B)Ivory C)Silver D)Gold
Answer:
B) Ivory
Explanation:
Ivory is a hard, white material from the tusks and teeth of animals, that consists mainly of dentine, one of the physical structures of teeth and tusks.
Platinum, Silver, and Gold are precious metals, meaning they are rare metallic chemical elements of high economic value, shiny, hard, strong with high melting points
Ivory is regarded as the least of the options. Ivory consists of dentine and
are usually found in the tusks and teeth of animals such as elephants. They
however don't have much value as the other metals in the options.
Precious metals include the following:
PlatinumSilverGoldThey are used for ornamental purposes. They are usually mined and refined
to produce a variety of objects.
Their use are however legal and they are expensive which makes the Ivory
the least out of the options provided.
Read more about Precious metals here https://brainly.com/question/1336406
Write the formula of the conjugate base of C6H5SH.
Answer:
C6H5S^-
Explanation:
This is because you are removing the hydrogen to make it a conjugate base.
The formula for conjugate base of C6H5SH is C6H5S⁻.
What is conjugate base?Conjugate base is defined as the substance which is formed when an acid liberate its protons.
The acid donate protons and the acid changes into base.
Conjugate acid is defined as the pair of compound that differs by its protons by gaining protons.
Conjugate acid and base are based in acid base theory.
Thus, the formula for conjugate base of C6H5SH is C6H5S⁻.
To learn more about conjugate base, refer to the link below:
https://brainly.com/question/12883745
#SPJ2
Under an O2(g) pressure of 1.00 atm, 28.31 mL of O2(g) dissolves in 1.00 L H2O at 25 °C. What will be the molarity of O2 in the saturated solution at 25 °C when the O2 pressure is 4.47 atm? Assume that the solution volume remains at 1.00 L.
In the first case, the molarity of oxygen gas is 0.0012 mol/L. In the second case, the molarity of oxygen gas is 0.0052 mol/L .
We have to obtain the number of moles of oxygen as follows;
P = 1.00 atm
V = 28.31 mL or 0.02831 L
n = ?
R = 0.082 atm LK-1mol-1
T = 25 °C + 273 = 298 K
n = PV/RT
n= 1.00 atm × 0.02831 L/ 0.082 atm LK-1mol-1 × 298 K
n = 0.0012 moles
Molarity = Number of moles/Volume = 0.0012 moles/1.00 L = 0.0012 mol/L
For the second case;
P = 4.47 atm
V = 28.31 mL or 0.02831 L
n = ?
R = 0.082 atm LK-1mol-1
T = 25 °C + 273 = 298 K
n = PV/RT
n = 4.47 atm × 0.02831 L/0.082 atm LK-1mol-1 × 298 K
n = 0.1265/24.436
n = 0.0052 moles
Molarity of oxygen = 0.0052 moles/1.00 L = 0.0052 mol/L
Learn more: https://brainly.com/question/2510654
HELP QUICK carbon dioxide makes up less than 1 percent of earths atmosphere, and oxygen makes about about 20 % These percentages are maintained most directly by what
Answer:
respiration and photosynthesis
Explanation:
The percentages of carbon dioxide and oxygen in Earth's atmosphere are maintained most directly by cellular respiration and photosynthesis.
What is photosynthesis?Photosynthesis simply refers to a biological and chemical process through which green plants convert light energy derived from the Sun into chemical energy, so as to make their food while using carbon dioxide (CO₂) and releasing oxygen.
On the other hand, cellular respiration is a series of metabolic reactions that occur in living cells and it involves the use of oxygen that are typically produced by green plants (autotrophs) during photosynthesis.
This ultimately implies that, the percentages of carbon dioxide (1%) and oxygen (20%) that are contained in Earth's atmosphere are maintained most directly by cellular respiration and photosynthesis.
Read more on photosynthesis here: brainly.com/question/3529377
How are mass and weight alike?
A. Both change with gravitational force.
B. Both are measured in pounds.
C. Both depend on how much matter an object has.
D. Both are the same everywhere in the universe.
Answer:
C. Both depend on how much matter an object has.
Explanation:
weight is the gravitational force acting on an object, so it does vary depending on gravity.
Hope it help and if it its correct please give brainliest
Stay Safe And Heal thy
Thank You
Suppose you are performing a precipitation titration to study the K sp of zinc(II) iodate, Z n ( I O 3 ) 2 . The literature value of K sp is 3.9 × 10 − 6 . If you use 0.200 M K I O 3 as the titrant, what concentration of I O 3 − (in M) do you predict will be needed to start precipitation in a 0.229 M solution of Z n ( N O 3 ) 2 ?
The predicted concentration of IO₃⁻ needed to start the precipitation titration is 1.703 × 10⁻⁷ M
The dissociation of zinc (II) iodate can be expressed as:
[tex]\mathbf{Zn (IO_3)_2 \to Zn^{2+} + 2IO_3^-}[/tex]
Given that the solubility product constant Ksp value = 3.9 × 10⁻⁶
For the above dissociation,
[tex]\mathbf{Ksp = [Zn^{2+ }] [IO_3^-]^2}[/tex]
Since [tex]\mathbf{ [Zn^{2+ }] = [Zn(NO_3)_2] = 0.229 \ M}[/tex]
∴
[tex]\mathbf{3.9\times 10^{-8} =(0.229) \times [IO_3^-]^2}[/tex]
[tex]\mathbf{ [IO_3^-]^2 = \dfrac{3.9\times 10^{-8} }{(0.229)}}[/tex]
[tex]\mathbf{ [IO_3^-]^2 = 1.703 \times 10^{-7} \ M}[/tex]
Therefore, we can conclude that the initial predicted concentration of IO₃⁻ needed to start the precipitation titration is 1.703 × 10⁻⁷ M
Learn more about solubility product constant here:
https://brainly.com/question/17274813?referrer=searchResults
How many atoms can be found in a sample of 75g of silicon
Answer:
[tex]\boxed {\boxed {\sf 1.6 \times 10^{24} \ atoms \ Si}}[/tex]
Explanation:
We are asked to find how many atoms are in a sample of 75 grams of silicon.
1. Convert Grams to MolesFirst, we must convert grams to moles using the molar mass. This is the mass of 1 mole of a substance. The molar mass is found on the Periodic Table because it is equal to the atomic mass, but the units are grams per mole instead of atomic mass units.
Look up the molar mass of silicon.
Si: 28.085 g/molWe convert using dimensional analysis, so we must set up a conversion factor.
[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
We are converting 75 grams of silicon to moles, so we multiply by this value.
[tex]75 \ g \ Si*\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
Flip the conversion factor so the units of grams of silicon cancel.
[tex]75 \ g \ Si*\frac {1 \ mol \ Si}{28.085 \ g \ Si}[/tex]
[tex]75 *\frac {1 \ mol \ Si}{28.085 }[/tex]
[tex]\frac {75}{28.085} \ mol \ Si[/tex]
[tex]2.670464661 \ mol \ Si[/tex]
2. Convert Moles to AtomsNext, we convert moles to atoms using Avogadro's Number, or 6.022 ×10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of silicon.
Set up another conversion factor, this time with Avogadro's Number.
[tex]\frac {6.022 \times 10^{23} \ atoms \ Si}{1 \ mol \ Si}[/tex]
Multiply by the number of moles we found.
[tex]2.670464661 \ mol \ Si*\frac {6.022 \times 10^{23} \ atoms \ Si}{1 \ mol \ Si}[/tex]
The units of moles of silicon cancel.
[tex]2.670464661 *\frac {6.022 \times 10^{23} \ atoms \ Si}{1 }[/tex]
[tex]2.670464661 * {6.022 \times 10^{23} \ atoms \ Si}[/tex]
[tex]1.60815382 \times 10^{24} \ atoms \ Si[/tex]
The original value of grams (75) has 2 significant figures, so our answer must have the same. For the number we found, that is the tenths place. The 0 in the hundredths place tells us to leave the 6 in the tenths place.
[tex]1.6 \times 10^{24} \ atoms \ Si[/tex]
Which diagram best illustrates the difference between distance and
displacement?
Answer:
It is the one that has start and finish and a compass on it...I am sorry I can share images for some reason. And underneath the compass, it says 1.0 Mile. It also has a compass in the bottom right-hand corner.
Explanation:
I just took the quiz and got it correct!
HELP
How can you tell if mass is being conserved
what is chemical reaction ?
How many atoms are in mercury phosphate
Answer:
There are 95 atoms in mercury phosphate
Explanation:
You just add the atomic number for both elements
Science 5th grade very PLZ answer correctly TYSM WILL MARK AS BRAINLIST IF ANSWERED TODAY!
Answer:
A
Explanation:
Conducts electricity:
-Steel
-Gold
-Copper
-Aluminum
Does not conduct electricity:
-Plastic
-Glass
-Rubber
-Wood
Metallic bonding causes metals to conduct electricity. Some metals are more highly conductive than others.
Hope this helps :)
Answer:
The first table correctly classifies the materials.
Explanation:
In table 1, all the elements on the left side are transition metals, expect for steel. Steel is not an element, it's an alloy (Which is a combination of two or more elements).Transition metals are very good conductors of heat and electricity. The reason why transition metals make such good conductors is because their outer electrons can move freely in their atom.
The right side of table 1 correctly classifies the materials that do not conduct electricity. The reason why those materials are poor conductors is because they all have their electrons tightly bound to their atoms.
In table 2, it classifies copper has a poor conductor which is wrong. It also classifies wood as a good conductor which also wrong for the reasons I stated above.
Calculate the freezing point of a solution of 3.46 g of a compound, X, in 160 g of benzene. When a separate sample of X was vaporised, its density was found to be 3.27 g/Lat 116°C and 773 torr. The freezing point of pure benzene is 5.45°C, and Kis 5.12°C kg/mol.
Answer:
Calculate the freezing point of a solution of 3.46 g of a compound,X,in 160 g of benzene. When separate sample of X was vaporised, its density was found 3.27 g/L at 116 c and 773 torr. The freezing point of pure benzen is 5.45 c, and kf is 5 .12 c/m.
Explanation:
First determine molar mass from
P*molar mass = density*R*T
Solve for molar mass. Then
moles = grams/molar mass
Solve for moles
molality = moles/kg solvent
Solve for molality
delta T = Kf*m
Solve for delta T, then convert to freezing point
To prepare 250.0 mL of 2.5 M KCl you will need to dilute _____ mL of 8.0 M KCl solution to a volume of 250.0 mL.
Answer:
78.125ml
Explanation:
Number of moles in 250ml of 2.5M KCl is (250÷1000)litres×2.5M so we divide these moles by 8M. The answer gotten will be in litres so multiply by 1000 to get it in ml
Usain Bolt went from 0.0 to
11.0m/s in 3.4s. What was his
acceleration?
Answer:
Answer: Change in speed = 11 m/sTime taken = 3.4sHence, acceleration = (11/3.4) m/s² = 3.235 m/s²
Explanation:
(winks and runs off)
Acceleration is 3.235 m/s² when Usain Bolt went from 0.0 to 11.0 m/s in 3.4 seconds.
What is acceleration?
Acceleration is defined as a rate at which the velocity changes with time with respect to both speed and direction.An object is said to be accelerated if it's speeds up r slows down.
Motion along a circle is always accelerated even when speed is constant it's direction is continuously changing.Acceleration is a vector quantity as it has both magnitude as well as direction.The magnitude of acceleration is described by Newton's second law of motion.
Formula of acceleration is change in speed /time.Substituting the given values in the given formula,(11.0-0.0)/3.4=3.235 m/s².
Thus, the acceleration is 3.235 m/s² when Usain Bolt went from 0.0 to 11.0 m/s in 3.4 seconds.
Learn more about acceleration,here:
https://brainly.com/question/12550364
#SPJ2
Diamond has a macromolecular structure and iodine is a simple covalent molecule. Use your knowledge of structure and bonding to explain why diamond has a higher melting point than iodine.
Answer:
Diamond is covalently bonded and has a giant covalent structure. Covalent bonds require lots of energy to break as they are strong so diamond has the highest melting point. Iodine has only weak intermolecular forces (instantaneous dipole-dipole interactions or London forces) whereas hydrogen fluoride has a permanent dipole and can hydrogen bond (as well as having London forces).
Explanation:
hope to help
How much Ba(OH)2, in grams, is needed to make a 1.00m aqueous solution?
Answer:
We can say that we need 171 g barium hydroxide needed to make one model equals solution.
Explanation:
I hope this answered your question.
Can anyone help me with this question?
sure i can help
so u have to ask someone else
Calculate the molarity of a solution that has 18.0 g of glucose, C6H12O6, dissolved in 80.0 g of water.
Answer:
same question
Explanation:
A solution is prepared by dissolving 15.0 g of pure HC2H3O2 and 25.0 g of NaC2H3O2 in 775 mL of solution (the final volume). Incorrect answer icon Incorrect. Did you use the correct form of the H-H equation
why the back torn of camel is important?
The back torn of Camel is important because it acts as a storage facility for
fats.
Camels are found in desert regions where there is scarcity of
Food WaterThis makes the food it eats to get stored at the back in the hump
region as fats so as to enable it survive long periods of unavailability of food.
The fats are gradually metabolized into nutrients which is used by the body
cells to ensure adequate energy availability and optimal survival.
Read more about Camels here https://brainly.com/question/24478294
I will give brainlist
How much Ba(OH)2, in grams, is needed to make a 1.00m aqueous solution?
Answer:
We can say that we need 171 g barium hydroxide needed to make one model equals solution.
Explanation:
I hope this answered your question.
171 gram of Ba(OH)2, in grams, is needed to make a 1.00 m aqueous solution.
What is mass?Mass is the quantity of matter. The mass is calculated by the density divide by the volume.
In 1.00 solution, the mass of Ba(OH)2 is 171 gram.
Thus, the mass of Ba(OH)2 is 171 gram.
Learn more about mass
https://brainly.com/question/19694949
#SPJ2
Someone help pls this is due today
Answer:
arrow down is gravity
Explanation:
Answer: The person above me is right
Explanation:
Have a Great day!
A cylinder contains helium gas with a volume of 2.60 L at 20 C and 768 mm Hg. If the balloon ascends to an altitude where the helium pressure is 614 mm Hg, what is the volume of gas? (Assume the temperature has not changed)
a. 12.2
b. 1.2
c. 20.2
d. 3.2
Answer: 3.2 [D]
Explanation:
Use Boyles law
(Might want to rotate image, sorry!)
13500 mL convert to milliliters of mercury
Answer:
5.627 × 1019 milliliters
Explanation:
is this what you wanted?