Answer:
they speed up
Explanation:
if you give more heat to a substance they gain more energy which makes them speed up. if you add more particles to a substance the particles gain more pressure which if inside a container can put more strain on the container
example - a balloon
the more air you put into a balloon, the more likely it is to burst because there are more particles colliding with the sides of the container and there is less space
if you put the balloon under a heat source it is more likely to burst because the heat gives the particles more energy which then makes them collide with the container more as they are moving around more
the volume of vessel is 6 litres. convert it into ml
Answer:
6000 ml
Explanation:
1 liter is a 1000 ml
How are moles and particles related? How could you find the number of particles in 4 moles of a substance?
Answer:
so in one mole of atom there are 6.02×10^23.
answers to B is 2.41×10^24
Explanation:
use this equation
number of particle=moles X 6.02×10^23
=4 X 6.02 ×10^23
=2.41×10^24
hope this make sense:)
The number of particles present in 4 moles of a substance is 24.088 particles.
What is moles?Moles is a unit to express the amount of any substance and in one mole of any substance 6.022 × 10²³ particles of that substance are present and this number is known as Avogadro's number.
As in 1 mole = 6.022 × 10²³ particles are present
In 4 moles = 4 × 6.022 × 10²³ = 24.088 particles are present
Hence, 24.088 particles are present in 4 moles.
To know more about Avogadro's number, visit the below link:
https://brainly.com/question/10614569
How or why does lead affect blood flow?
Answer:
lead causes vessels to constrict, limiting the space for blood to flow (compare the size of the red circles.) This narrowing increases blood pressure, forcing the heart to work harder.
Answer:
By mimicking calcium and increasing cell stress, lead causes vessels to constrict, limiting the space for blood to flow. This forces the heart to work harder because the narrowing increases blood pressure.
There are moles of Carbon if I have 2.25 x 1023 atoms of Carbon? A. 0.19 moles b. 5.38 moles c. 0.37 moles d. 2.67 moles
Answer:
c. 0.37 moles
Explanation:
To find the number of moles (n) in a certain number of atoms of a substance, we divide the number of atoms by Avogadro number (nA), which is 6.02 × 10²³ atoms.
That is,
n = number of atoms ÷ 6.02 × 10²³
According to this question, there are 2.25 x 10²³ atoms of carbon (C). The number of moles contained in this carbon is as follows:
n = 2.25 x 10²³ ÷ 6.02 × 10²³
n = 2.25/6.02 × 10 (23 - 23)
n = 0.374 × 1
n = 0.374moles
Lime is added to a lake to neutralize the effects of acid rain. The pH value of the
lake water rises from 4 to 7. What is the change in concentration of H+ ions in the
lake water?
Answer:
The change in concentration of H+ ions is -9.99×10⁻⁵
Explanation:
When pH rises, we talk about neutralization and, there is a decline in proton's concentration.
pH lower than 7 is acid
pH higher than 7 is basic
Protons are neutralized by hydroxides to make water as this:
H₃O⁺ + OH⁻ ⇄ H₂O
pH = - log [H₃O⁺]
[H₃O⁺] = 10^-pH
In conclussion: [H₃O⁺]₁ = 10⁻⁴ → 1×10⁻⁴
[H₃O⁺]₂ = 10⁻⁷ → 1×10⁻⁷
1×10⁻⁷- 1×10⁻⁴
The change in concentration of H+ ions is -9.99×10⁻⁵
Which represents a balanced nuclear equation?
1) 23/11Na ——>24/11Mg+1/1H
2) 24/11Na ——>24/12Mg+0/-1e
3) 24/13Al ——>24/12Mg+0/-1e
4) 23/12Mg ——>24/12Mg+1/0n
Answer:
The correct option is 2.
Explanation:
In a nuclear reaction balanced we have that:
1. The sum of the mass number (A) of the reactants (r) is equal to the sum of the mass number of the products (p) [tex] \Sigma A_{r} = \Sigma A_{p} [/tex]
2. The sum of the atomic number (Z) of the reactants is also equal to the sum of the atomic number of the products [tex]\Sigma Z_{r} = \Sigma A_{p}[/tex]
So, let's evaluate each option.
1) [tex]^{23}_{11}Na \rightarrow ^{24}_{11}Mg + ^{1}_{1}H[/tex]
The mass number of the reactant is:
[tex]A_{r} = 23 [/tex]
The sum of the mass number of the products is:
[tex] A_{p} = 24 + 1 = 25 [/tex]
This is not the correct option because it does not meet the first condition ([tex] \Sigma A_{r} = \Sigma A_{p}[/tex]).
2) [tex]^{24}_{11}Na \rightarrow ^{24}_{12}Mg + ^{0}_{-1}e[/tex]
The mass number of the reactant and the products is:
[tex]A_{r} = 24 [/tex]
[tex] A_{p} = 24 + 0 = 24 [/tex]
Now, the atomic number of the reactants and the products are:
[tex]Z_{r} = 11 [/tex]
[tex] Z_{p} = 12 + (-1) = 11 [/tex]
This nuclear reaction is balanced since it does meet the two conditions for a balanced nuclear equation, ([tex] \Sigma A_{r} = \Sigma A_{p}[/tex] and [tex] \Sigma Z_{r} = \Sigma Z_{p}[/tex]).
3) [tex]^{24}_{13}Al \rightarrow ^{24}_{12}Mg + ^{0}_{-1}e[/tex]
The mass number of the reactant and the products is:
[tex]A_{r} = 24 [/tex]
[tex] A_{p} = 24 + 0 = 24 [/tex]
Now, the atomic number of the reactants and the products are:
[tex]Z_{r} = 13 [/tex]
[tex] Z_{p} = 12 + (-1) = 11 [/tex]
This reaction does not meet the second condition ([tex] \Sigma Z_{r} = \Sigma Z_{p}[/tex]) so this is not a balanced nuclear equation.
4) [tex]^{23}_{12}Mg \rightarrow ^{24}_{12}Mg + ^{1}_{0}n[/tex]
The mass number of the reactant and the products is:
[tex]A_{r} = 23 [/tex]
[tex] A_{p} = 24 + 1 = 25 [/tex]
This reaction is not a balanced nuclear equation since it does not meet the first condition ([tex] \Sigma A_{r} = \Sigma A_{p}[/tex]).
Therefore, the correct option is 2.
I hope it helps you!
Make a flow chart on uses of metals and non metals
you have to make flow chart with explanation
Answer:
Metals:
1. Metals are strong than non metals
2. Metals can be formed in wires, thin sheets, utensils and any other heavy meachinary for industries.
3. Metals are used for building construction and used in many other manufacturers
Non Metals:
1. Non metals are less stronger than metals.
2. Non metals can be used for manufacturing bottles, toys, bags, files etc.
3. Non metals are used in making of bottles, jars, chairs etc.
Thank you.....
Have a good day.....
Determine the number of electrons and protons in the following element: Tc Group of answer choices 43 protons, 43 electrons 43 protons, 56 electrons 56 protons, 43 electrons 99 protons, 43 electrons
I NEED THIS NOW PLZ NO LINKS OR ILL REPORT
Which is an example of a chemical change? *
cutting paper in half
wax melting off a candle
the wick in a candle burning to ash
painting a wall blue
Answer:
the third one...........
Answer:
wax melting off a candle
You have 350 mL of 3.4 M hydrochloric acid (HCl). How many grams of HCl gas are dissolved? Bonus: what is the volume of the HCl at STP?
Answer:
1. 43.44g of HCl
2. 26.67 L of HCl
Explanation:
1) Molarity of a solution = number of moles (n) ÷ Volume (V)
According to the provided information in this question,
V = 350 mL = 350/1000 = 0.350L
Molarity = 3.4 M
Using Molarity = n/V
3.4 = n/0.350
n = 3.4 × 0.350
n = 1.19mol
Using the formula below to calculate the mass of HCl;
mole = mass/molar mass
Molar mass of HCl = 1 + 35.5 = 36.5g/mol
mole = mass/MM
mass = 1.19 mol × 36.5g/mol
mass = 43.44g of HCl
2) At STP, HCl has a pressure of 1atm, a temperature of 273K
V = ?
n = 1.19 mol
R = 0.0821 Latm/molK
Using PV = nRT
V = nRT/P
V = 1.19 × 0.0821 × 273/1
Volume = 26.67L
The boiling point of heavy water is?
Answer:
The boiling point of heavy water is 101.4C
please mark me brainlest pls
Answer: 101.42 Celsius
Explanation:
The boiling point of heavy water is 101.42 Celsius which is higher than the boiling point of normal water (100 Celsius)due to its higher molar mass
explain how ships made of steel float on water
Answer:
The air that is inside a ship is much less dense than water. That's what keeps it floating
Will give brainliest
What is ozone depletion in simple words
Answer:
Ozone layer depletion is the thinning of the ozone layer present in the upper atmosphere. This happens when the chlorine and bromine atoms in the atmosphere come in contact with ozone and destroy the ozone molecules. One chlorine can destroy 100,000 molecules of ozone. It is destroyed more quickly than it is created
Answer:
Ozone depletion, gradual thinning of Earth’s ozone layer in the upper atmosphere caused by the release of chemical compounds containing gaseous chlorine or bromine from industry and other human activities. The thinning is most pronounced in the polar regions, especially over Antarctica. Ozone depletion is a major environmental problem because it increases the amount of ultraviolet (UV) radiation that reaches Earth’s surface, which increases the rate of skin cancer, eye cataracts, and genetic and immune system damage. The Montreal Protocol, ratified in 1987, was the first of several comprehensive international agreements enacted to halt the production and use of ozone-depleting chemicals. As a result of continued international cooperation on this issue, the ozone layer is expected to recover over time.
the PH of a solution with a [H+] of 1x10^9 is ?
Answer:
9
Explanation:
pH = -log[H+] = -log(1x10^9) = 9
Complete the symbol equation for the preparation of sodium sulfate
2NaOH(aq) + H2SO4(aq) => Na2SO4(s) + 2H2O(l)
This is a neutralization reaction.
Which type of bond is found in an alkane?
O A. Double only
B. Single and double
O C. Single only
O D. Single and triple
Considering the definition of alkanes, single bonds are found in an alkane.
Definition of AlkanesAlkanes are a class of hydrocarbons (compounds containing only carbon and hydrogen) that are made up of a variable number of carbon atoms joined together by single bonds. In turn, each carbon atom bonds to hydrogen atoms, which may eventually be replaced by other atoms or functional groups.
In other words, alkanes are open or closed chain molecules that are linked by simple bonds.
Alkanes are saturated hydrocarbons because the bonds between carbon atoms are simple and stable. And as mentioned, the hydrogen atoms bonded to each carbon atom can be replaced by other atoms, such as halogens (fluorine, bromine, chlorine) or various groups or “radicals”. In the latter case, the structure becomes more complex giving rise to branched alkanes.
SummaryIn summary, single bonds are found in an alkane.
Learn more about alkanes:
brainly.com/question/1831557
brainly.com/question/27455385
brainly.com/question/4299529
#SPJ1
Answer: C) single only
Explanation:
just got it right
The fat adipose cells is broken down into fatty acids. Which pathway is involved in this process?
Answer:
the anwer is glycolysis
If a student has 125 mL of a 4.00 M CuSO4 solution and needs a 1.50 M solution, what volume do they need to dilute it to?
Answer:
333.3mL
Explanation:
Using the formula as follows:
C1V1 = C2V2
Where;
C1 = initial concentration (M)
C2 = final concentration (M)
V1 = initial volume (mL)
V2 = final volume (mL)
According to the information provided in this question,
C1 = 4.00M
C2 = 1.50M
V1 = 125mL
V2 = ?
Using C1V1 = C2V2
4 × 125 = 1.5 × V2
500 = 1.5V2
V2 = 500/1.5
V2 = 333.3mL
Therefore, the CuSO4 solution needs to be diluted to 333.3mL to make 1.50 M solution.
Predict the product(s) of the following neutralization reaction. Type the balanced the equation.
HNO3 + Ba(OH)2
Answer:
The products from the neutralization reaction are barium nitrate and water.
The balanced chemical equation is
2 [tex]HNO_{3}[/tex] + 1 [tex]Ba(OH)_{2}[/tex] --> 1 [tex]Ba(NO_3)_{2}[/tex] + 2 [tex]H_{2}O[/tex].
249 g of potassium iodide, KI, is mixed with 496.5 g of lead(II) nitrate, Pb(NO3)2.
The equation of the reaction is represented below.
[Pb(NO3)2 = 331; KI = 166; PbI2 = 461, KNO3 = 101]
Calculate the number of moles of excess reagent left.
Give your answer to three significant figures.
Answer: The number of moles of excess reagent left is 0.750 moles
Explanation:
The number of moles is calculated by using the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For KI:Given mass of [tex]KI[/tex] = 249 g
Molar mass of [tex]KI[/tex] = 166 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of KI}=\frac{249g}{166g/mol}=1.5mol[/tex]
For [tex]Pb(NO_3)_2[/tex]:Given mass of [tex]Pb(NO_3)_2[/tex] = 496.5 g
Molar mass of [tex]Pb(NO_3)_2[/tex] = 331 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of }Pb(NO_3)_2=\frac{496.5g}{331g/mol}=1.5mol[/tex]
The given chemical equation follows:
[tex]2KI+Pb(NO_3)_2\rightarrow 2KNO_3+PbI_2[/tex]
By stoichiometry of the reaction:
If 2 moles of KI reacts with 1 mole of lead(II) nitrate
So, 1.5 moles of KI will react with = [tex]\frac{1}{2}\times 1.5=0.75mol[/tex] of lead(II) nitrate
As the given amount of lead(II) nitrate is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.
Thus, KI is considered a limiting reagent because it limits the formation of the product.
Moles of excess reactant ([tex]Pb(NO_3)_2[/tex]) left = [1.5 - 0.75] = 0.750 moles
Hence, the number of moles of excess reagent left is 0.750 moles
S
O
sulfur dioxide
3. In liquid sulfur dioxide, which of the following types of intermolecular force(s) would be present?
London Dispersion Forces
Dipole-Dipole
II.
Hydrogen Bonding
IV
Covalent Bonds
A. I
B. I and II
C. I,II, and I
D. I, II, III, and IV
Answer:
B
Explanation:
B
will give brainliest. In the Solubility lab, sugar was the and water was the solute / solution O solution / solute solute / solvent solvent/solute
Answer:
Sugar was the solute and water was the solvent.
Who can answer these?
NEED HELP ASAP PLEASE
Identify the type of bonding, covalent, ionic, or metallic, between
the atoms in an oxygen molecule.
Answer:
here hope it helps
Explanation:
covalent bonds
Which of the following most likely happens when the volume of a gas increases the number of collisions of gas particles remains same. The number of collisions of gas particles increases. The pressure of the gas remains the same. The pressure of the gas decreases
Answer:
D. The pressure of the gas decreases!
Explanation:
According to Boyle's Law, there is an inverse relationship between the volume of a gas and its pressure!
So, if the volume of a gas increases, its pressure will decrease; the same thing will happen if the pressure of the gas increases -- the volume will decrease!
↑P↓V and ↓P↑V <---- this is what it would look like visually!!
Hope this helps! :)
When the volume of a gas increases then the pressure of the gas decreases.
What is ideal gas equation?Ideal gas equation is a hypothesis which tells about the behavior of gas in different conditions and it will be represented as:
PV = nRT
From this equation it is clear that pressure and volume are inversely proportional to each other:
P ∝ 1/V
Means if pressure increases ten volume decreases or if pressure decreases then volume increases.
Hence option (4) is correct.
To know about ideal gas equation, visit the below link:
https://brainly.com/question/25290815
How do countries with different currencies trade goods with each other?
A.
They trade actual physical products to avoid confusion over currency differences.
B.
They negotiate to determine which country's currency will be used for the whole exchange.
C.
They create a new shared currency, such as the European Union countries' euro.
D.
They use the exchange rate to convert one country's currency to another's.
Answer:
D- They use the exchange rate to convert one's Country's currency to another's
Explanation:
2. How much heat must be absorbed by a sample of 1337 grams (g) of ice at -10°C in order to turn it into water vapor at 120°C?
Answer:
jk
Explanation:
2. Which element below would be the best choice when creating a covalent molecule with an
Oxygen atom?
A. Na
B. Mg
C. Ne
D. O
co2(g)+H20+148Kcal---->H2Co3 Endotérmica o exotérmica
endothermic
requires energy to occure
Which formula contains 2 non metals
Answer:
The answer is SiO2
Explanation:
Because nonmetals are those who gain electrons and form ve ions