how does a battery work ?​

Answers

Answer 1
A battery is a device that stores chemical energy and converts it to electrical energy. ... The flow of electrons provides an electric current that can be used to do work. To balance the flow of electrons, charged ions also flow through an electrolyte solution that is in contact with both electrodes.
Answer 2

Answer:

I completely agree with the first person's response.

Explanation:

They deserve Brainliest. Have a great summer.


Related Questions

An athlete running the velocity 3m/s due east is confronted with two trade winds. One wind travelling at 10m/s in a direction north 65degrees east and another wind travelling at 8m/s in a direction south 70degrees east. Find the resultant velocity and direction of the athlete

Answers

Answer:

v = 10.09 m / s,   8.78 North of East

Explanation:

The easiest way to solve this exercise is to decompose the velocities into a coordinate system, where the x-axis coincides with the West-East direction and the y-axis coincides with the South-North direction.

athlete's velocity v₁ₓ = 3 m / s

wind speed 2 v₂ = 10 m / s with direction 65 north of east

          sin 65 = v_{2y} / v₂

          cos 65 = v₂ₓ / v₂

          v_{2y} = v₂ sin 65

          v₂ₓ = v₂ cos 65

          v_{2y} = 10 sin 65 = 9.06 m / s

          v₂ₓ = 10 cos 65 = 4.23 m / s

wind speed 3 v₃ = 8 m / s with direction 70 south of east

This angle measured from the positive side of the x-axis is

          θ = 360 - 70

          θ = 290

          sin 290 = v_{3y} / v₃

          cos 290 = v₃ₓ / v₃

          v_{3y} = v₃ sin 290

          v₃ₓ = v₃ cos 290

           v_{3y} = 8 sin 290 = -7.52 m / s

          v₃ₓ = 8 cos 290 = 2.74 m / s

now we can find each component of the velocity

         

X axis

        vₓ = v₁ + v₂ₓ + v₃ₓ

        vₓ = 3 + 4.23 + 2.74

        vₓ = 9.97 m / s

Y axis  

        v_y = v_{2y} + v_{3y}

        v_y = 9.06 - 7.52

         v_y = 1.54 m / s

to find the modulus let's use the Pythagorean theorem

         v = [tex]\sqrt{v_x^2 + v_y^2 }[/tex]

         v = [tex]\sqrt{9.97^2 + 1.54^2}[/tex]

         v = 10.09 m / s

let's use trigonometry for the direction

         tan θ = v_y / vₓ

        θ = tan⁻¹ v_y / vₓ

        θ = tan-1 1.54 / 9/97

         θ = 8.78

           

the address is 8.78 North of East

The specific heat capacity of sea water is 4100 J/Kg°C and the boiling point of 100.6 °C. (i) Calculate the energy required to raise the temperature of 0.900 kg of this sea water from 10 °C up to its boiling point. Also mention the equation to be used. *

Answers

Answer:

334.314 (kJ)

Explanation:

1) the formula for the required energy is: Q=c*m(Bp-t), where c - 4100 J/kg*C; m - 0.9 kg; Bp - 100.6 C; t - 10 C.

2) according to the formula above:

Q=4100*0.9*(100.6-10)=41*9*906=334314 (J).

Water is being heated on the stove at 90 ⁰C. What is this temperature on the Fahrenheit degrees?

Answers

Answer:

194 degrees farenheit! hot

Explanation:

(90°C × 9/5) + 32 = 194°F

Answer:

194

Explanation:

to get from celcius to Fahrenheit

multiply temperature by 2 and add 30

2
Select the correct answer.
Which statement is true about acceleration?
OA.
It is the rate of change of speed per unit time.
OB.
It is the rate of change of displacement per unit time.
Ос.
It is the rate of change of velocity per unit time.
OD.
It is the rate of change of position per unit time.
Reset
Next

Answers

Answer:

the answer is C ----- it is the rate of change of velocity per unit time

Explanation:

acceleration

[tex] = \frac{velocity(v)}{time(t)} [/tex]

Q= Which one of the following statement is incorrect?
A. When a switch is closed in a circuit, no current flows.
B. A switch is a device for turning on and off an electric current.
C. An electric current is a complete loop around which a current can flow.
D. An electric current is a flow of charge

Answers

Answer:

A.

Explanation:

I think it might be the big number A

A piece of iron has a mass of 30 g and its volume is 6.2 cm3. What is its density?

Answers

Answer:

Density = 4.84 g/cm³

Explanation:

Given the following data;

Mass = 30 g

Volume = 6.2 cm³

To find the density of the piece of iron;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the equation;

[tex]Density = \frac{mass}{volume}[/tex]

Substituting into the equation, we have;

[tex]Density = \frac{30}{6.2}[/tex]

Density = 4.84 g/cm³

a ball of mass 0.2 kg is dropped from a height of 20m on impact to the ground it loses in 30 joule of energy calculate the height it reaches on rebound​

Answers

Answer:

new PE at top=original PE - energy lost

mgh=.2(9.8)20-30

Explanation:

mgh=.2(9.8)20-30 = 9.2

A rocket of mass M when empty carries a mass M of fuel. The rocket and fuel travel at speed v.
The engine of the rocket is fired and all of the fuel is expelled. The speed of the rocket increases
to 2v.

What happens to the kinetic energy of the rocket?
A It doubles.
B It halves.
C It increases by a factor of four.
D It stays the same.

Answers

The kinetic energy of the rocket should be A. it doubles.

What is kinetic energy?

Kinetic energy represents the energy where an object or a particle should be the reason for its motion. It transfers energy than it should be done on an object by applying a net force, so the object speeds up and thereby gains kinetic energy. In the case when the speed increased to 2v so the kinetic energy should also doubles.

Learn more about speed here: https://brainly.com/question/17052831

In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm, then what amount of elastic potential energy will be stored in it?

Answers

Answer:

4E

Explanation:

The elastic potential energy of an elastic material (e.g a spring, a wire), is the energy stored when the material is stretched or compressed. It is given by

U = [tex]\frac{1}{2}kx^2[/tex]               --------------------(i)

Where;

U = potential energy stored

k = spring constant of the material

x = elongation (extension or compression of the material).

From the first statement;

when elongation (x) is 4cm, energy stored (U) is E

Substitute these values into equation (i) as follows;

E = [tex]\frac{1}{2}k(4)^2[/tex]

E = 8k

Make k subject of the formula    

k = [tex]\frac{E}{8}[/tex]   [measured in J/cm]

From the second statement;

It is stretched by 4cm.

This means that total elongation will be 4cm + 4cm = 8cm.

The potential energy stored will be found by substituting the value of x = 8cm and k = [tex]\frac{E}{8}[/tex] into equation (i) as follows;

U = [tex]\frac{1}{2}\frac{E}{8} (8)^2[/tex]  

U = [tex]\frac{1}{2}{8E}[/tex]

U = [tex]{4E}[/tex]

Therefore, the potential energy stored will now be 4 times the original one.

2. Two charges at fixed locations produce an electric field as shown
below. If point charge. Y. is negative, which direction will it travel?

Answers

Answer:

sum of the two forces as both point to the right is a force that points to the right,

Explanation:

The force on the cast load at point Y is given by

        F = q_y  E

force is a vector magnitude so its result is

        ∑ F = Fₐ + F_b

indicate that the charge at y is negative, we analyze the direction of the force created by each charge

Charge A

as the electric field is incoming the charge is negative and as the test charge is negative both repel each other, consequently the force points to the right

Charge B

in this case the electric field lines are salient, therefore the charge is positive, consequently the force on the charge at y is attractive and points to the right

the sum of the two forces as both point to the right is a force that points to the right, that is, in the direction of the charge located at B

The vine has a fixed end, so Tarzan's path is circular. So the vine must not only support Tarzan's weight (or some component of it) but must also provide centripetal force to curve Tarzan's velocity. At Tarzan's lowest point, this can be expressed as:_________.

Answers

Answer: hello your question lacks some data attached below is the missing data

answer : T - mg = ma[tex]_{c}[/tex]

Explanation:

Given that the vine has a fixed end and Tarzan's path is circular

At Tarzans lowest point the point can be expressed as shown below.

It can be expressed as : T - mg = ma[tex]_{c}[/tex]

Explain why magnetic damping might not be effective on an object made of several thin conducting layers separated by insulation.

Answers

Answer:

The eddy currents will be very small.

Explanation:

An object made of several thin conducting layers separated by insulation may not be affected by magnetic damping because the eddy current produced in each layer due to induction will be very small and the opposing magnetic flux produced by the eddy currents will be very small.

HELP PLEASE ?? can u answer this multiple choice for me please?

Answers

Answer:

.04 kg m/s

Explanation:

Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.

Before the collision, the data given for the toy train:

v = 0.5m/s

m = 75g

We need to convert grams into the SI unit of mass, kg.

75g / 1000g * 1kg = 0.075kg

Using p = mv, we can determine:

p = 0.075kg * 0.5m/s = 0.0375 kg m/s

Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.

what happens when a light ray is incident normally to the interface of two media?

Answers

Explanation:

ahhh, maybe you mean , what happens when a light ray hits the interface of two media perpendicular to the normal.

if that is the case then the light ray will not bend but it will travel in the same direction in the second medium as it was travelling in it's first medium

hope this helps bro

A 15.0 kilogram cart initially traveling at 2.0 meters per second east accelerates uniformly at 0.75 meter per second squared east for 6.0
seconds. What is the speed of the cart at the end of this 6,0 second interval? Please include all work - including givens, formula, substitution,
and units for full credit. (2)

Answers

Answer:

Explanation:

Since this is not parabolic motion, it is one-dimensional motion. Very simple. What we are given is

mass: 15.0 kg

initial velocity: 2.0 m/s

acceleration: .75 m/s/s

time: 6.0 seconds

Since we are looking for final velocity, the equation we need for this is

v = v0 + at that says final velocity is equal to the initial velocity plus the acceleration of the object times how long it travels. We don't have a need for the mass here at all.

[tex]v=2.0\frac{m}{s}+.75\frac{m}{s^2}(6.0s)[/tex]

Notice that one of the seconds labels to the right of the plus sign cancel out, leaving us with like units...which we HAVE to have if we want to add.

Simplifying a bit gives us

v = 2.0 m/s + 4.5 m/s so

v = 6.5 m/s

What is the three-body problem? Explain at a level so an 8th grader could understand

Answers

Answer:

In physics and classical mechanics, the three-body problem is the problem of taking the initial positions and velocities (or momenta) of three point masses and solving for their subsequent motion according to Newton's laws of motion and Newton's law of universal gravitation.[1] The three-body problem is a special case of the n-body problem. Unlike two-body problems, no general closed-form solution exists,[1] as the resulting dynamical system is chaotic for most initial conditions, and numerical methods are generally required.

Hope this answer is right!

The reading on your speedometer is the

A) average velocity
B) none of these is correct
C) speed
D) instantaneous velocity

Answers

The answer is speed!!
If you need why it is speed comment, if helped mark me the brainiest!!
The answer is c) speed

What are the wavelengths of x-rays and gamma rays?
a.
x-rays - 3 pm to 20 nm
gamma rays- less than 3 pm
c.
x-rays - 3 mm
gamma rays- 20 to 50nm
b.
x-rays - 400nm
gamma rays- 700nm
d.
None of the above

Answers

Answer:

1. less. 2 greater. 3. the same. 8. An FM radio station broadcasts its signal at a fre​- ... wave 3. | 3x108 = 269.15x107). = 3.20m. 2. An electromagnetic AM-band radio wave could have Base your answers to questions 9 and 10 on the informa- ... X rays. -Microwaves. -Long

A spring with a spring constant of 200 is compressed 0.5 . What is the potential energy stored in the spring

Answers

Answer:

E = 25 J

Explanation:

Given that,

Spring constant, k = 200

Compression, x = 0.5

We need to find the potential energy stored in the spring. The formula for the stored potential energy in the spring is given by :

[tex]E=\dfrac{1}{2}kx^2[/tex]

Put all the values,

[tex]E=\dfrac{1}{2}\times 200\times 0.5^2\\\\E=25\ J[/tex]

So, 25 J of potential enersy is stored in the spring.

Based on the law of conservation of energy, how can we reasonably improve a machine’s ability to do work?

Answers

Answer:

We can reasonably improve a machines ability to do work by reducing the friction between the moving parts of machine.

Explanation:

According to the law of conservation of energy, the energy can neither be created nor destroyed.

Kiedy błyska blisko slyszymy krótki grzmot, kiedy daleko długi. Dlaczego ?

Answers

Answer:

it is becuase light travel faster then sound thus light come to us first

Explanation:

to dlatego, że światło podróżuje szybciej niż dźwięk, to światło dociera do nas jako pierwsze

what the balance electrons for calcium​

Answers

Answer:

its two valence electrons

Explanation:

Calcium is a group 2 element with two valence electrons. Therefore, it is very reactive and gives up electrons in chemical reactions.

UR WELCOME!! :)

50N force accelerated a body at a rateof 8 metres per second square. Calculate the mass of the body​

Answers

Answer:

m=6.25kg

Explanation:

Force= mass × acceleration

50=m×8

make m subject of the formula...

m=50/8

m=6.25kg

Answer:

[tex]\boxed {\boxed {\sf 6.25 \ kilograms}}[/tex]

Explanation:

According to Newton's Second Law of Motion, force is the product of mass and acceleration.

[tex]F= m \times a[/tex]

We know the force is 50 Newtons and the acceleration is 8 meters per second squared. Let's convert the units to make the problem and unit cancellation easier.

1 Newton is equal to 1 kilogram meter per square second (1 kg*m/s²), so the force of 50 N is equal to 50 kg*m/s².

Now we know 2 values:

F= 50 kg*m/s²a= 8 m/s²

Substitute the values into the formula.

[tex]50 \ kg *m/s^2= m \times 8 \ m/s^2[/tex]

Since we are solving for the mass, we must isolate the variable, m. It is being multiplied by 8 meters per square second and the inverse of multiplication is division. Divide both sides by 8 m/s².

[tex]\frac {50 \ kg *m/s^2}{8 \ m/s^2}= \frac{m \times 8 \ m/s^2}{8 \ m/s^2}[/tex]

[tex]\frac {50 \ kg *m/s^2}{8 \ m/s^2}= m[/tex]

The units of meters per square second (m/s²) cancel.

[tex]\frac {50 \ kg }{8 }=m[/tex]

[tex]6.25 \ kg =m[/tex]

The mass is 6.25 kilograms.

hich of these best describes Earth’s mantle?

Most dense layer, consists of the outer and inner parts
Thinnest under the oceans and thickest under continents
Middle layer, density increases with depth as pressure increas

Answers

Answer:

Middle layer, density increases with depth as pressure increases

Explanation:

The Earth's mantle is the middle layer of the earth. It is the largest layer of the earth consisting of about 83 % of the earth's volume and continues to a depth of 2900 km. Also, the mantle is hot and made of solid rock. It is hot since it is close to the core and its pressure and density increases with depth causing it to be more solid.

So, the Earth's mantle is the middle layer, density increases with depth as pressure increases.

NEED ANSWER QUICK, WILL GIVE BRAINLIEST! How many nails do sapiens have?
A. 6
B. 10
C. 3
D. None

Answers

Answer:

nice calculations!

Explanation:

None of the above. Or is it regarding toe alone with finger nails?

What would be the weight (in Newtons) of a person with a mass of 80 kg on Earth, where the acceleration due to gravity is approximately 9.8 m/s/s? *
please help asap

Answers

Answer:

ml tayo 1v1 durugin kita

Explanation:

ano takot ml 1v1

A fixed mass of gas has a volume of 25 cm³. The pressure of the gas is 100 kPa.
The volume of the gas is slowly decreased by 15 cm³ at constant temperature.
What is the change in pressure of the gas?
A)67 kPa
B)150 kPa
C)170 kPa
D)250 kPa​

Answers

Answer:

67 kPa

Explanation:

Given that,

Initial volume, V₁ = 25 cm³

Initial pressure, P₁ = 100 kPa

Final volume, V₂ = 15 cm³

We need to find the change in pressure of the gas. The relation between the volume and pressure of a gas is given by :

[tex]P\propto \dfrac{1}{V}\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}\\\\P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{100\times 25}{15}\\\\=166.66\ kPa[/tex]

or

= 167 kPa

The change in pressure,

= P₂ - P₁

= 167 kPa - 100 kPa

= 67 kPa

Hence, the correct option is (a).

As an IT technician for your company, you have been notified that the Windows domain does not seem to be functioning properly. Being familiar with domains, you are fairly confident you know what the issue is. But just to be safe, you take the applicable time to gather additional information and to identify what, if anything, has changed.

Which of the following is the BEST next step?

A. Determine the appropriate fix.
B. Create a hypothesis.
C. Implement the fix.
D. Identify what has changed.
E. Gather information.

Answers

Answer: Create a hypothesis

Explanation:

From the information given, information has been gathered and the identification to ascertain if there's a change. Then, an hypothesis has to be created in order to know what the problem is.

One has to carry out some research in order to know what went wrong and should also validate the hypothesis by consulting with ones peers. By doing this, the most likely causes of the issues will be gotten.

What state of matter did the earth need to be in order for planetary differentiation to occur?
Answer: Gas, liquid, or solid?

Answers

Gas. I know this because first you will need to do the equator so I will say gas

A man who weighs 75kg on the surface of the earth whose mass is 6*10^24kg. If the radius of earth is 6480km ,calculate the force of attraction between them.

Answers

Answer:

but I don't know what the answesorryr

Answer:

the force of attraction between them???

Other Questions
Why does white privilege exist? In your opinion, was the Civil War inevitable? Were the North and the South doomed from the beginning to eventually battle each other over their differences? (Your answer needs to be one paragraph with at least five sentences.) which of the following is a proportion 4/6 =9/12, 6/9= 8/12, 8/10=6/8 , 3/4=12/15 The summation symbol, is the Greek capital symbol and it is used like the English S. Why do you think it was chosen to represent a Sigma Notation? Mike is studying the phylogenetic tree for big cats.A big cat phylogenetic tree is shown. A bracket goes to clouded leopard and to another bracket. That bracket goes to 2 additional brackets. One bracket goes to tiger and snow leopard. The other bracket goes to janguar and another bracket. The other bracket has lion and leopard.He made several statements about the tree. Which statement is not true?The leopard is more closely related to the jaguar than to the snow leopard.The leopard is more closely related to the tiger than to the clouded leopard.The leopard is more closely related to the snow leopard than to the clouded leopard.The leopard is more closely related to the tiger than to the snow leopard. Question and choices are in the photo please explain the answer If the company's return on assets is 13% and the industry average is 10%, the company's return on assets ratio is _____ the industry average. Compare and contrast the older multiplexing techniques such as frequency division and time division multiplexing with the newer techniques such as discrete multitone and orthogonal frequency division multiplexing. What appears to be the trend in these newer protocols? Aluminum reacts with oxygen to form aluminum oxide. Select the correct unbalanced skeleton equation for this reaction. A. Al(s) + 0(g) - AIO(s) B. Al203(s) - Al(s) + 02(8) C. Al(s) - 02(8) + Al203(s) D. Al(s) + 02(8) - Al203(s) Which of the following is the correct graph of a linear equation below Y +3 equals -2/3 times X -4 If consumers increase their purchases of goods and services, then a likely outcome for our economy is A) rising GDP. B) rising unemployment. C) decreasing factory orders. D) slowing economic growth. Which line of latitude and longitude is Europe located? a car's acceleration is negative. This means the car is _____.a. slowing down b. speeding upc. changing directiond. traveling in a circle Which relationship has a zero slope?A two column table with five rows. The first column, x, has the entries, negative 3, negative 1, 1, 3. The second column, y, has the entries, 2, 2, 2, 2.A two column table with five rows. The first column, x, has the entries, negative 3, negative 1, 1, 3. The second column, y, has the entries, 3, 1, negative 1, negative 3.A coordinate plane with a straight line starting at (negative 5, negative 5) and passing through the origin, and ending at (5, 5)A coordinate plane with a straight line starting iat (negative 2, 5) and passing the x-axis at (negative 2, 0), and ending at (negative 2, 5). Rewrite this paragraph and make it better: My father is a teacher. I admire him a lot. I am considering becoming a teacher too. My older brother works for a big company. My father really loves learning, so he is a natural teacher. My father always helped me with my homework. I guess I will become a teacher. * Sebastian bought x gallons of gas at a price of $2.91 per gallon at his local gas station. When he paid for the gas, Sebastian also paid $11.40 for granolabars and a box of tissues.If Sebastian filled 10 gallons of gas, how much did he spend in all at the gas station? Which organism in the food chain is impacted the most by Biomagnification Suppose the ABC bank has excess reserves of $3,000 and checkable deposits of $50,000. If the reserve requirement is 20 percent, what is the size of the bank's actual reserves? a. $53,000 b. $13,000 c. $10,000 d. $7,000 We discussed two types of demand in class. The first type is associated with the primary product (e.g., automobiles) and the second type is related to a component part of the primary product (e.g., tires). In order, these are:_______.a. Dependent and independent demand b. Primary and forecast demand c. Independent and dependent demand d. Independent and secondary demand e. Dependent and linked demand 3(x+4)>12can yall help me fr