Answer:
the electric energy travels through the plug or wire or whatever is connecting the energy source to the lightbulb, which conducts electricity, and to the light bulb. the electric energy is transfered into light energy and thermal energy
Explanation:
i hope i understood this question and answered it correctly XD
Mary has a mass of 40 kg and sprints at 1 m/s. How much kinetic energy does she have?
¼
She has a kinetic energy of 20 J.
Roberto has twice the mass his sister Mary has (see above) but runs at the same velocity as Mary.
Will his kinetic energy be twice as much? Show your work.
Why does time seem to flow only in one direction? ...
Answer:
Mass is relative too. Thus, as much fuel as you pack you will never reach the velocity of light. At the velocity of light, if you were somehow to reach it, your mass will be infinite and it will so require infinite force to push you, so no going beyond that speed. This is the reason time flows in a single direction.
Explanation:
To minimize signal distortion, at each end of the J-1939 CAN-bus there is a(n)_____________resistor.
What is the approximate value of log⁵³ 217895.4
Answer:
3.09594
Explanation:
hope this helps
The student investigates how the resistance of a thermistor varies with temperature. The student has a power supply, a thermistor, an ammeter, a voltmeter and some connecting leads. Describe an investigation the student could carry out to measure the resistance of a thermistor between –10 °C and 70 °C.
Your answer should include:
1. Any other apparatus the student will need
2. The measurements to be taken
3. How the data should be processed.
(This question is worth 6 marks on my assignment so I just really want to get down the best possible answer for it.)
The characteristics of the thermistors allow to design an experiment to analyze the dependence of resistance with temperature;
1) We set up the circuit
2) We look for the current of the circuit and we keep it fixed.
3) We look for the thermistor resistances for each temperature.
4) Plot Resistance versus Temperature.
A Thermitor is an element whose resistance changes with temperature, for example a platinum resistance.
An experiment that we can carry out to measure is to set up the attached circuit where we have:
A DC power supply. A resistor to control the maximum current in the circuit and avoid thermal problems in the thermistor. A thermistor. A thermometer placed next to the thermistor. A source of heat under the thermistor under a glass with ice and water, but without affecting the other elements of the circuit.
Let's start by looking for the current in the circuit.
In thermistors, the resistance for room temperature is given, so if we measure the voltage across the fixed resistor, we can shrink the voltage across the thermistor.
[tex]V_{source} = V_R + V_{therm} \\V_{therm} = V_{source} - V_R \\ i = \frac{V_{therm} }{R_{therm}}[/tex]
This current remains fixed, since the fixed resistance is greater than the resistance of the thermistor throughout the range.
Second step.
Now we can change the temperature that is measured in the thermometer, for each temperature the voltage in the fixed resistance is measured, the resistance in the thermistor is calculated.
[tex]R_{therm} = \frac{V_{source} - V_R}{i}[/tex]
Third step.
We end with a graph of resistance versus temperature of the curve obtained, it is possible to understand the behavior of the resistance of the thermistor with temperature.
In conclusion with the characteristics of thermistors we can design an experiment to analyze the dependence of resistance with temperature:
1) We set up the circuit
2) We look for the current of the circuit and we keep it fixed.
3) We look for the thermistor resistances for each temperature.
4) Plot Resistance versus Temperature.
Learn more about thermistors here: brainly.com/question/15690488
A 0.60 kg mass is moving horizontally with a speed of 7.0 m/s when it strikes a vertical wall. The mass rebounds with a speed of 4.20 m/s. What is the magnitude of the change in linear momentum of the mass
Answer: The magnitude of the ball's momentum change is
Δp=m∣ν
i
−ν
f
∣=(0.70kg)∣(5.0m/s)−(−2.0m/s)∣=4.9kg⋅m/s.
Explanation:
Find the gravitational potential energy of a body of mass 25kg,kept at a height of 4m
Answer:
Massm=2.5kg
Massm=2.5kgGravitational potential energy is the work done against force of gravity is stored in the body at a height h .
Massm=2.5kgGravitational potential energy is the work done against force of gravity is stored in the body at a height h .P.E.=U=mgh
Massm=2.5kgGravitational potential energy is the work done against force of gravity is stored in the body at a height h .P.E.=U=mghU=2.5×10×15
Massm=2.5kgGravitational potential energy is the work done against force of gravity is stored in the body at a height h .P.E.=U=mghU=2.5×10×15U=25/10×10×=375j
PLEASE ANSWER ASAP!!
Which part of the graph represents how much energy the reactants need to gain to become products? F Potential energy HA Н G Reaction progress
A. H minus F
B. H
C. G
D. F
(NO LINKS)
Plzzzz help meeeeeeee
Answer:
15m²
8.6m²
lcm²
6000cm²
0.1km²
40cm²
5210 mm²
500m²
0.0087mm²
500cm²
Cuáles son las diferencias, con respecto al proceso de extracción y tratamiento, entre
el gas propano y el gas metano.
Answer:
la burguesía era de clase alta y en su mayoría rica. La gente de clase trabajadora generalmente trabajaba con un salario mínimo y solo tenía suficiente dinero para poner comida en la mesa. En este momento, la gente veía a los trabajadores de clase media como menos que otras personas.
Explanation:
an empty bottle weight 22.4 g when empty,406g when filled with water and 52.8g when filled with liquid x
Answer:
question is incomplete
Gas sample A has a mass of 32.00 grams. Gas sample B has a mass of 28.00
grams. If the two gas samples are both at 25°C, which sample has the greatest
average kinetic energy?
Answer:
I think 32.00
Explanation:
Because the equation is mass times velocity so is you mutiply 32 by 25 and 28 times 25 sample A would be greater.
The sample with the greatest average kinetic energy is sample A
The average kinetic energy of a sample can be estimated by the formula one-half of the mass sample multiplied by the speed (RMS) squared.
Mathematically, we have:
[tex]\mathbf{K.E_{avg} = \dfrac{1}{2}mv_{rms}^2}[/tex]
If the mass of sample A = 32.00 grams, andThe mass of sample B = 28.00Provided that the speed (RMS) is constant, the average kinetic energy of sample A will be greater than the average kinetic energy of sample B because sample A has a greater mass than sample B.
Learn more about average kinetic energy here:
https://brainly.com/question/13868723
Please help !!!
Will give the brainliest..
Please answer correctly..
Explanation:
hope this is right!!!!!!!!!!!!!
1. a. Electron 1 -1
b. Proton 2000 +1
c. Neutron 2000 0
2. a. An uncharged nucleon is neutron. It is a chargeless subatomic particle.
b. The particle with the least mass is electron. The mass of an electron is so small that it is considered to be negligible while calculating the atomic mass of an element.
c. The particle with the same mass as a neutron is proton. However if we see the absolute mass of neutron and proton then it is seen that neutron has a greater mass than proton.
d. The particle with the same amount of charge as an electron is proton. Note that the amount of charge is only same. Electron is negatively charged while proton is positively charged.
e. A particle that is negatively charge is electron. The relative charge of electron is -1.
Hope you could understand.
If you have any query, feel free to ask.
Thirty Joules of energy are transferred out of a system. The energy is lost through heat, mechanical, and electrical energy. If mechanical energy took up 10 J and electrical energy took up 5 J, how many Joules were lost through heat energy?
OPTIONS
5 J
15 J
30 J
45 J
Answer:
its 15 J i belive
Explanation:
Explain when acceleration remains constant.
Explanation:
acceleration remains constant when velocity does not increase or decrease
A ball is released freely from the top of a building 80m high. Find its speed.
At the top of the building, the speed of the ball is zero.
The speed increases steadily as the ball falls.
When it hits the street, its speed is 39.6 m/s.
about how much more energy is released in a 6.5 richter magnitude earthquake than in one with magnitude 5.5?
Answer:
For example, an earthquake of magnitude 5.5 releases about 32 times as much energy as an earthquake measuring 4.5. Another way to look at this is that it takes about 900 magnitude 4.5 earthquakes to equal the energy released in a single 6.5 earthquake.
Explanation:
who agree?? with this
Explanation:
ME!!!!!!!!!!!!!!!!!!
Answer:
I Fully Agree with this becoz it is only the key...
Do u agree?
what is the model size to actual size
Answer:
You have to divide your real measurement to the model. For example, if your real measurement is 5m and your model is 20cm, divide 5/20 =1/4 and that means the ratio would be 1:4.
Explanation:
An object's _____ energy that is used to perform work is equal to its potential energy plus its kinetic energy.
You and your friend are pushing a box at the same constant speed. You pushed 20 feet in 10 minutes, your friend was pushing for 5 minutes. What distance must she travel so the two of you can travel at the same speed?
Answer:
60 N.C
Explanation:
The box will move in the direction of the push and pull with a force of 60 N. C.
If you and your friend are pushing a box at the same constant speed. You pushed 20 feet in 10 minutes, your friend was pushing for 5 minutes. , then the distance must she travel so the two of you can travel at the same speed would be 30 feet.
What is speed?The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.
As given in the problem If you and your friend are pushing a box at the same constant speed. You pushed 20 feet in 10 minutes, your friend was pushing for 5 minutes.
The distance traveled by box = 20 + 10
= 30 feets
Thus, the distance must she travel so the two of you can travel at the same speed would be 30 feet.
To learn more about speed here, refer to the link given below ;
brainly.com/question/7359669
#SPJ2
which is not a general characteristic of starburst galaxies?
Starburst galaxies is simply known as the rate at which the galaxy is now converting gas into stars. The statement that is not a general characteristic of starburst galaxies is that The "starburst" is thought to be caused by the presence of a supermassive black hole in the galaxy's center.
The starburst galaxy is also regarded as the free quantity of gas with which stars can be formed.They are known to be rare. A starburst is known to be an astrophysical process. It is the process of star formation happening at a rate that is large when compared to the rate that is often observed.
See full question below
Which is not a general characteristic of starburst galaxies?
The "starburst" is thought to be caused by the presence of a supermassive black hole in the galaxy's center. The observed features that us to classily a galaxy as a 'starburst" galaxy must be only temporaryphenomena in the galaxy' Supernovae occur so frequently that their effects combine to drive a galactic wind that blows material into intergalactic space. The galaxy's rate of star formation is many times higher than the rate of star formation in the Milky WayLearn more from
https://brainly.com/question/6939136
What are the main pieces of evidence we use to differentiate a black hole binary from a neutron star binary
Answer:
Black hole accretion disk emit in the X-rays but neutron star disks are cooler
Hope this Helps
Potassium chlorate gives Potassium chloride+Oxygen
Find the Balancing Chemical Equation for the above
Answer:
The balanced equation is given as: $ 2KCl{O_3} \to 2KCl + 3{O_2} $.when two waves in the same medium hit each other, the resulting displacement of the medium is
Explanation:
The resulting displacement of the medium during complete overlap is -1 unit. This is still destructive interference since the two interfering pulses have opposite displacements.
for hundreds of years scientists deny the existence of rogue waves until the presence of when was finally caught on record. when and where was the first time a rogue wave was measured?
Answer:
A rogue wave estimated at 18.3 meters (60 feet) in the Gulf Stream off of Charleston, South Carolina. At the time, surface winds were light at 15 knots.
Explanation:
Rogue, freak, or killer waves have been part of marine folklore for centuries, but have only been accepted as real by scientists over the past few decades.
Rogues, called 'extreme storm waves' by scientists, are those waves which are greater than twice the size of surrounding waves, are very unpredictable, and often come unexpectedly from directions other than prevailing wind and waves.
Most reports of extreme storm waves say they look like "walls of water." They are often steep-sided with unusually deep troughs.
Since these waves are uncommon, measurements and analysis of this phenomenon is extremely rare. Exactly how and when rogue waves form is still under investigation, but there are several known causes:
Constructive interference. Extreme waves often form because swells, while traveling across the ocean, do so at different speeds and directions. As these swells pass through one another, their crests, troughs, and lengths sometimes coincide and reinforce each other. This process can form unusually large, towering waves that quickly disappear. If the swells are travelling in the same direction, these mountainous waves may last for several minutes before subsiding.
Focusing of wave energy. When waves formed by a storm develop in a water current against the normal wave direction, an interaction can take place which results in a shortening of the wave frequency. This can cause the waves to dynamically join together, forming very big 'rogue' waves. The currents where these are sometimes seen are the Gulf Stream and Agulhas current. Extreme waves developed in this fashion tend to be longer lived.
Hope this helps, have a nice day/night! :D
On January 1st, 1995, the first accurate measurement of a rogue wave took place. It was captured by a laser detector on Statoil's Draupner oil drilling rig, which is situated 100 miles off the Norwegian coast.
What is rogue wave?
Although rogue, freak, or killer waves have been mentioned in maritime legend for many years, scientists have only recently acknowledged their existence.
Scientists refer to these waves as "rogues," or "severe storm waves," since they are more than twice as large as the waves around them, very unpredictable, and frequently arrive from directions other than the prevailing wind and waves.
Extreme storm waves are typically described as looking like "walls of water" in reports. Frequently, they have steep sides and exceptionally deep valleys.
Measurements and analyses of this phenomenon are extremely rare because these waves are not common.
Learn more about rogue waves, refer the link:
https://brainly.com/question/14097449
#SPJ2
A system releases 622 kJ of heat and does 105 kJ of work on the surroundings. What is the change in internal energy of the system
Answer:
Δ-727 or -7.27x10²kJ
Explanation:
ΔV=q-w
(q)= -622
(w)= -105
(both negative because it indicate loss of energy)
ΔV= -622+(-105)
ΔV= -727 kJ
The change in internal energy of the system when it released a heat of 622 kJ and does a work of 105 kJ on the surroundings is -727 kJ.
What is change in internal energy?Internal energy is all the energy contained in an object.
To calculate the change in internal energy of the system, we use the formula below.
Formula:
ΔU = Q-W............. Equation 1Where:
ΔU = Change in internal energy of the system,W = work done by the systemQ = Heat released by the system.From the question,
Given:
Q = - 622 kJ ( released of heat)W = 105 kJ.Substitute these values into equation 1
ΔU = -622-105ΔU = -727 kJHence, the change in internal energy of the system when it released a heat of 622 kJ and does a work of 105 kJ on the surroundings is -727 kJ.
Learn more about internal energy here: https://brainly.com/question/25737117
Question 2
You can make the puck travel in complex ways by placing a set of charges around on the field. So, here’s your game challenge:
Arrange sources charge around to propel the puck from its starting position into the goal. That’s pretty easy for a straight shot; you just put a negative charge behind the goal. But what if there are barriers along the way? This is a real test of your physical understanding, including Newton’s laws of motion and electrostatic forces. Game’s on!
Part A
On the control bar, check the Trace and Field boxes. The game has three Difficulty levels. Start with Difficulty level one and arrange source charges to get the puck into the goal. Once you’ve made a score at any level, increase the Difficulty level. Take a screen capture of two of your most difficult goals and paste them here. At least one of these should be at Difficulty level 2 or 3.
Answer:
A. The electric field lines point outward and the black puck moves backwards. From this I can see that I can't put the red charge in front of the black puck because it will go away from the goal.
B. The electric field lines point inward and the black puck moves forwards and backwards. The conclusion I made from this was the blue charge by itself will not be able to get into the goal.
C.The puck moves faster when the mass increases and moves slower when the mass decreases. The more mass, the more force that is applied to the puck.
D. The relationship between the speed of the black puck and its distance from the blue charge is when the puck is further away from the blue charge, the slower the puck moves away from it.
Explanation:
Brainlest if this helped!
Look at the diagram shown below. The reading on ammeter 1 is 0.15 A. What will the reading on ammeter 2 be
There's no way to tell, without knowing the resistance of either X-1 or X-2, or the reading on A3.
A galaxy spectrum has a redshift of 70,000 km per second. If the Hubble constant is 70 km per second per Mpc (megaparsec), how far away from us in this galaxy
Using the Hubble law v = H₀d where v = recessional speed = 70,000 km per second H₀ = hubble constant = 70 km/s/Mpc and d = distance of galaxy.
Making d subject of the formula, we have
d = v/H₀
Substituting the values of the variables into the equation, we have
d = v/H₀
d = 70000 km/s/70 km/s/Mpc
d = 1000 Mpc
So, the galaxy is 1000 Mpc away from us.
Learn more about hubble law here:
https://brainly.com/question/18484687