There are 75 grams in 2.5 moles of dicarbon hexahydride (C₂H₆).
The given parameters;
dicarbon hexahydride = [tex]C_2H_6[/tex] number of moles of the dicarbon hexahydride = 2.5 molesThe molecular mass of dicarbon hexahydride is calculated as follows;
Mw = C₂H₆ = (2 x 12) + (6 x 1)
Mw =30 g/mol
The mass of the dicarbon hexahydride in the given number of moles is calculated as follows;
mass = n x Mw
mass = 2.5 x 30
mass = 75 g
Thus, we can conclude that there are 75 grams in 2.5 moles of dicarbon hexahydride (C₂H₆).
Learn more here:https://brainly.com/question/21920797
If you were able to magnify a penny down to the atomic level, what two
observations could you make about the atoms?
The two observations you would make about the atoms are
They are made up largely of empty spaceTheir mass is concentrated at the center called a nucleusThese observations were made by Ernest Rutherford in his model of the atom established in 1911, when he performed his gold foil experiment and observed the scattering angle of the alpha particles which led him to conclude that the mass of the atom was concentrated at the center.
Also, that most of the alpha particles also went through the gold foil suggested that the atom was made up basically of empty space.
So,
The two observations you would make about the atoms are
They are made up largely of empty spaceTheir mass is concentrated at the center called a nucleusLearn more about the atom here:
https://brainly.com/question/24873449
what type of mixture is formed when black iron filings and yellow sulfur powder black iron filing is formed
Homogeneous
Heterogeneous
Compound
Answer:
when you heat the blend, you form iron sulfide, a compound
Depending on the ratio, you could form Fe4S3 or fool's gold
Explanation:When iron filings and sulphur powder are mixed and heated they undergo a chemical reaction and form ferrous sulphide (FeS). It is a new substance which has properties entirely different from Fe and S. Therefore, heating of mixture of iron and sulphur powder is a chemical change forming a compoundf
Someone pls help me I will make you brain
ANSWER : I AND III
HOPE IT HELPED
Write down the names, physical properties, and inertness of NOBLE GASES ( group no. 8)
Note:
*Please don't copy from anywhere
*50 POINTS!!!!!!!!
Answer:
There's No Answer Im Sorry
Read the statements. In eukaryotic organisms, genes usually consist of two alleles. The two alleles are often on different parts of the same chromosome.
These sentences contain incorrect information. Which option describes the mistake?
○ In Eukaryotic organisms, the two alleles of the gene are on different chromosomes.
○ in eukaryotic organisms, genes are usually spread over four or more chromosomes,
○ In eukaryotic organisms, genes usually consist of a single allele.
○ In eukaryotic organisms, the two alleles of the gene are joined end to end on the same chromosome.
Answer:
I think its B but im not too sure
Which one please help
Answer:
density is mass more mass more density and same as volume
Difference Between baking soda and baking powder
Answer:
Baking soda is sodium bicarbonate, which requires acid and a liquid to become activated and help baked goods rise. Conversely, baking powder includes sodium bicarbonate, as well as an acid. It only needs a liquid to become activated. Substituting one for the other is possible with careful adjustments. Baking soda is strong. In fact, it is about 3-4x stronger than baking powder. More baking soda in a recipe doesn't necessarily mean more lift.
Explanation:
Explanation:
baking soda contains one ingredient, sodium bicarbonate. however, baking powder contains sodium bicarbonate , monocalcium phosphate and either sodium acid prophetess or sodium aluminum sulfate
Atomic Number
Atomic Mass Number
Protons
Neutrons
Electrons
Charge
Element 1
6
12
A
6
6
B
Element 2
6
13
6
C
D
1+
Look at the above table.
How many neutrons should be at (C) Element 2
Question 5 options:
6
7
11
13
Answer: 7
Explanation:
protons + neutrons = atomic mass number
cuales son los nombres de la distribución de los electrones en un átomo ?
Ammonium sulphate + __________________ potassium sulfate + ammonia + water
Please fill in the blank.
Answer:
Potassium Hydroxide Solution =
or
Potassium Hydroxide =
Since we know the products and one of the reactions, we can work backward to discover what the other reactant may be.
As it is in the question, we can map the reactants and product:
Reactants Product
Ammonium Ammonia
Sulfate Sulfate
________ Potassium
________ Water
Since the reaction will yield Potassium and water, the likely reactant is Potassium Hydroxide (KOH). This is because we know that Ammonium lost a Hydrogen atom that could combine with the Hydroxide radical to form water.
This becomes clear when we consider the net ionic equation:
Ammonium sulphate + Potassium Hydroxide → potassium sulfate + ammonia + water
if we write this a balanced chemical equation:
(NH₄)₂SO₄ + 2KOH → K₂SO₄ + 2NH₃ + 2H₂O
if we write the reaction as an ionic equation
2NH₄⁺ + SO₄⁻ + 2K⁺ + 2OH⁻ → 2K⁺ + SO₄⁻ + 2NH₃ + 2H₂O
if we remove the ions that appear on both the reactant and product side (spectator ions)
2NH₄⁺ + 2OH⁻ → + 2NH₃ + 2H₂O4. Explain error and how it can impact your results from an experiment
Random errors will shift each measurement from its true value by a random amount and in a random direction. These will affect reliability (since they're random) but may not affect the overall accuracy of a result.
how does decreasing the temperature affect the volume of gas??
Answer: Well, when you decrease the temperature in a gas the volume will decrease as well as the pressure. Since, heating a gas or liquid increases the temperature/pressure. Therefore, it'd increase the volume but since the temperature is decreasing the volume of the gas does too.
What words did the Pilgrims use to describe the new laws?
new and legal
just and equal
godly and fair
In the underlined section, what do the colonists promise to do?
“… and by virtue hereof to enact, constitute and frame such just and equal Laws, … as shall be thought most meet and convenient for the general good of the Colony, unto which we promise all due submission and obedience.”
—Mayflower Compact
what is the empirical formula of a compound that contains only iron and oxygen and is 22.27% oxygen?
Answer:
A) FeO
Explanation:
Options:
A) FeO
B) FeO2
C) Fe2O
D) Fe7O2
The correct answer is A) FeO.
(Hope this helps can I pls have brainlist (crown)☺️)
The empirical formula of a compound that contains only iron and oxygen and is 22.27% oxygen is FeO. The correct option is A.
What is the empirical formula?The simplest whole number ratio of atoms in a chemical molecule is its empirical formula. The empirical formula is the chemical formula that gives the number of atoms of the chemical formula that is given in the chemical reaction.
For example, the C₆H₁₂O₆ is the formula of glucose. The simplest formula is CH₂O. This will be the simplest ratio of this compound. The first one, this C₆H₁₂O₆ is the molecular formula.
It only contains the element one quantity. The empirical formula that contains oxygen and iron will be FeO. The empirical formulas is calculated by dividing the simplest formula.
Thus, the correct option is A) FeO.
To learn more about empirical formulas, refer to the link:
https://brainly.com/question/14044066
#SPJ6
The question is incomplete. Your most probably complete question is given below:
A) FeO
B) FeO2
C) Fe2O
D) Fe7O2
During recrystallization, why is it necessary to cool the solution slowly?
answer:
the reason is to ensure more solute is dissolving as it cools down. it is important to do it slowly because water will be sucked into buchner flask by a partial vaccum through the rubber tubing and be able to arrange molecules.
The diagram shows the box for an element in the periodic table.
What is the atomic mass of the element shown?
A. 11
B. 23.0
C. 34.0
D. 12
A
Explanation:
sodium is a chemical element with the symbol and the atomic number is 11
What kind of feature results from the convergence of two oceanic plates?
Answer: When a convergent boundary occurs between two oceanic plates, one of those plates will subduct beneath the other. Normally the older plate will subduct because of its higher density. The subducting plate is heated as it is forced deeper into the mantle, and at a depth of about 100 miles (150 km) the plate begins to melt.
Explanation:
What is the energy of a single photon with a wavelength of 750 nm.
Answer:
Refer to the attachment
3. Which of the following are examples of chemical changes? Select all that apply.
-Water freezing
-Cookies baking
-Dry Ice subliming
-Wood burning
Answer:
wood burning and cookies baking
Explanation:
took the test <333
Answer:
Wood burning and cookies baking
Explanation:
which molecules are required for the citric acid cycle to fully oxidize the carbons donated by acetyl coa?
Explanation:
At the start of the citric acid cycle, a molecule of oxaloacetate accepts a two-carbon acetyl group from acetyl CoA to form citrate. This reaction kicks off the citric acid cycle; thus, oxaloacetate is required for the cycle to take place.
To begin the citric acid cycle, an oxaloacetate molecule accepts a two-carbon acetyl group from acetyl CoA to form citrate. Because this reaction initiates the citric acid cycle, oxaloacetate is required for the cycle to occur.
What is citric acid cycle ?The Krebs cycle, also known as the citric acid cycle or TCA cycle, is a chain of reactions that occurs in the mitochondria and is used by almost all living cells to produce energy through aerobic respiration. It consumes oxygen and emits water and carbon dioxide as byproducts.
All aerobic organisms use a series of chemical reactions to generate energy by converting acetate derived from carbohydrates, fats, and proteins into carbon dioxide.
The citric acid cycle involves the attachment of an acetyl group from acetyl CoA to a four-carbon oxaloacetate molecule to form a six-carbon citrate molecule.
Thus, Citrate is oxidized in a series of steps, releasing two carbon dioxide molecules for each acetyl group fed into the cycle.
To learn more about the citric acid cycle, follow the link;
https://brainly.com/question/11459709
#SPJ6
When you cut an apple, what are the chemical changes and physical changes when cutting it?
Answer:
cutting of an apple is both physical and chemical change
because cutting a apple, the size and shape of the apple changes. it will be a chemical change because after cutting an apple, the color apple changes when left open
HELPPPP PLEASE WILLLL GIVE BRIANLIESTTTT
We can use the formula M₁V₁ = M₂V₂ the total volume of water that will yield 0.800 M HCl. We can then subtract that from the initial volume to get how much water needs to be added.
Since M₁V₁ = M₂V₂ (starting mole× starting volume = end mole × end volume)
⇒ (5 mol)(20 mL) = (0.80 mol) V₂
100 mol/mL = 0.8 mol × V₂
⇒ V₂ = 100 mol/mL ÷ 0.8 mol
= 125 m
Since we began with 20.0 mL of water,
water needed to add = 125 mL - 20 mL = 105 mL
I need a catchphrase for the element Boron as a superhero describing its traits!
Block A is made of copper, which has a specific heat value of 0.385 J/g*C.
Block B is made of aluminum, which has a specific heat value of 0.900
J/g*C. Both blocks have a mass of 100 grams. If you are trying to heat the
blocks to a temperature of 200 C, which block will need to absorb more
energy?
o Block A (copper) because it has a lower specific heat value.
o Block B (aluminum) because it has a higher specific heat value.
o Block A (copper) because it has a higher specific heat value.
o Block B (aluminum) because it has a lower specific heat value.
Block B will need to absorb more energy as it has higher specific heat value.
What is specific heat?Specific heat is defined as the amount of heat required to raise the temperature of one gram of a substance by one degree Celsius rise. Units of specific heat are calories or joules per gram per degree Celsius.
Specific heat capacity varies with temperature often and is different for each state of matter. While the substance which undergoes phase transition then it's specific heat is technically infinite.
Specific heat of a gas is significantly higher when it is allowed to expand as it is heated .It may also be referred to as a ratio between the specific heat capacities of two substances at a given temperature.It is calculated by the formula ,Q=mcT
For copper, it is 100×0.385×473=18210.5 J
For aluminium ,it is 100×0.90×473=42570 J
As the specific heat of aluminium is higher it will absorb more energy.
Learn more about specific heat ,here:
https://brainly.com/question/11297584
#SPJ2
Which of the following would exhibit the lowest conductivity?
a. Mg
b. NaCl
c. CO(2)
d. MgCl(2)
Answer:
the correct answer is b. Co2...............
hello how to draw the electron dot structure of H2S and F2?
Explanation:
1. Attachment
Electron dot structure of H2S (hydrogen sulfide)
2. Attachment
Electron dot structure of F2 (Fluorine).
A mixture of hydrogen, nitrogen, and water vapor has a total pressure of 864 mmHg. The partial pressure of hydrogen is 220 mmHg and that of nitrogen is 410 mmHg. What is the partial pressure of water vapor?
Answer:
As per Dalton's law of Partial pressure,
The total pressure of a mixture of gases is equal to sum of partial pressure of individual components of the mixture.
So,P=P_H+P_N+P_WP=P
H
+P
N
+P
W
\implies 864\ mm=220\ mm+410\ mm+P_W\implies⟹864 mm=220 mm+410 mm+P
W
⟹ P_W=864-630=234P
W
=864−630=234 mm of Hg.
Explanation:
"The partial pressure of water vapor is 234 mm Hg."
What is partial pressure?
The force that a gas exerts is known as partial pressure. The total pressure of a mixture of gases is equal to the sum of their partial pressures.
Partial pressure can be calculated by using the formula: [tex]P_{Total} =P_{N} +P_{H} +P_{H}[/tex]
Puts the value of given data in above equation.
[tex]Px_{W} =864-410-220\\\\= 234 mm Hg[/tex]
To know more about partial pressure.
https://brainly.com/question/22285534
#SPJ
Pleaseee helppp!!!!!
Answer:
it releases energy that is used for power
Explanation:
Answer: It releases energy that is used for power.
Explanation: https://www.investopedia.com/terms/h/hydrocarbon.asp
Atoms share one or more pairs of electrons.
Options:
Ionic Bond or Covalent Bond?
Answer:
covalent bonds
Explanation:
ionic transfer of e^- ions formed (charges)
ionic=non-metal+ metal
ex: F+Ca
covalent sharing e^- no true charges
covalent= non-metal+ non-metal
ex: F+P
( my notes)
Convert 1.00 us gallon in kilometer (kL)