How many grams of barium hydroxide are required to react with 12.2 grams of caesium phosphate?

The effect of increasing water temperature on pH is A. When carbon dioxide dissolves in water, it forms carbonic acid.

The degree of acidity of a solution is also known as pH. A solution is said to be neutral if it has a value of 7, is said to be acidic if it has a pH below 7, and is said to be alkaline if it has a pH above 7.

The increase in seawater temperature can be caused by the absorption of carbon dioxide from the atmosphere which can cause the formation of carbonic acid and the release of H+ ions which cause acidity so that the pH will decrease. The released hydrogen ions will bind to carbonate ions to form bicarbonate resulting in a decrease in carbonate ions, this can be harmful to marine biota such as the calcification process in corals which requires carbon ions.

Learn more about carbonic acid at:

https://brainly.com/question/17062319

#SPJ4

Through tests and theoretical calculations, the cause of the high yield and the process of the accidental oxidation reaction were determined.

When two of the substances sodium and chloride combine to create sodium chloride, common table salt, the reaction is 2Na + Cl2 → 2NaCl. A kind of synthesis process in which metallic nanoparticles react with CO2 to produce the equivalent metallic carbonate is illustrated by the aforementioned interaction between calcium oxide and CO2.

Synthesis is the process of creating chemical compounds through the reaction of simpler constituents. A difficult and complex task that necessitates the ongoing creation of novel reactions, catalysts, and procedures is the building of sophisticated and defined new molecules.

To know more about synthesis visit:

https://brainly.com/question/14917187

#SPJ4

a) The total pressure of the system is  1.79 atm

b) The mole fraction and partial pressure of hydrogen is  0.89 and 1.59 atm respectively

c) The mole fraction and the partial pressure  of argon is 0.11 and 0.19 atm.

We know tat we can be able to obtain the total pressure in the system by the use of the ideal gas equation. We would have from the equation;

PV = nRT

P = pressure

V = volume

n = Number of moles

R = gas constant

T = temperature

Number of moles of hydrogen = 14.2 g/2g = 7.1 moles

Number of moles of Argon = 36.7 g/40 g/mol

= 0.92 moles

Total number of moles =  7.1 moles + 0.92 moles = 8.02 moles

Then;

P = nRT/V

P = 8.02 * 0.082 * 273/100

P = 1.79 atm

Mole fraction of hydrogen = 7.1/8.02 = 0.89

Partial pressure of hydrogen =  0.89 * 1.79 atm

= 1.59 atm

Mole fraction of argon = 0.92 / 8.02

= 0.11

Partial pressure of argon = 0.11  *  1.79 atm

= 0.19 atm

Learn more about partial pressure:https://brainly.com/question/13199169

#SPJ1

Equation that represents Jada’s take-home earnings in dollars E = 12.20(h)-7.15

The equation that represents the situation is h=6.82 hours

An equation is a formula that is express the equality of two expressions. The equation is representing direct proportion is , by the commenting them with in the equal sign .

As per the given question

Pay hour = $12.20 per hour

Bus fare = $7.15

1.Equation:

Assume that

She has work for "h" hours

Total earning = E

So,E = 12.20(h) - 7.15

If,Total earning = E = $90.45

So,E = 12.20(h) - 7.15

90.45 = 12.20(h) - 7.15

h = 6.82 hours

To know more about equation click-

https://brainly.com/question/2972832

#SPJ1

The following should be compared when deciding whether a given nucleophilic acyl substitution reaction will occur as written :

The  nucleophilic acyl substitution reaction will occur as written there are the following that we should compare is given as follows :

The nucleophilic acyl substitution is the reaction in which the carbonyl and the nucleophile will forms a new bond of the acyl group.

To learn more about nucleophilic acyl substitution here

https://brainly.com/question/28383861

#SPJ4

The pattern here is Non-symmetrical or bimodal.

How can you see patterns in data?

How do you define "identifying patterns in data"?

To know more about data patterns, checkout this link:

https://brainly.com/question/28835836

#SPJ4

The balance the equation below in acidic medium are :

6Fe²⁺  +  2Cr₂O₇²⁻   +  14H⁺  ---->  6Fe³⁺  +  2Cr³⁺   +   7H₂O

1) The equation is given as :

Fe²⁺  +  Cr₂O₇²⁻   ----->   Fe³⁺  +  Cr³⁺

oxidation half : Fe²⁺  --->     Fe³⁺

reduction half : Cr₂O₇²⁻  --->  Cr³⁺

2) first balance the oxidation half :

Fe²⁺  --->     Fe³⁺ +  e⁻

this equation is balanced.

3) balanced reduction half :

Cr₂O₇²⁻  --->  2Cr³⁺

add seven H₂O molecule on the right side to balance the O atoms.

Cr₂O₇²⁻  --->  2Cr³⁺   +  7 H₂O

to balance 14 H atom add 14 H⁺ on the left side :

Cr₂O₇²⁻  +  14H⁺  --->  2Cr³⁺   +  7 H₂O

now, balance the charge :

Cr₂O₇²⁻  +  14H⁺  + 6e⁻ --->  2Cr³⁺   +  7 H₂O

6 electrons are gained by the reduction half , so multiply 6 in oxidation equation

6Fe²⁺  --->     6Fe³⁺ +  6e⁻

add both the equation we get :

6Fe²⁺  +  2Cr₂O₇²⁻   +  14H⁺ 6e⁻  ---->  6Fe³⁺  +  2Cr³⁺   +   7H₂O + 6e⁻

The final balanced equation is given as :

6Fe²⁺  +  2Cr₂O₇²⁻   +  14H⁺  ---->  6Fe³⁺  +  2Cr³⁺   +   7H₂O

To learn more about balanced equation here

https://brainly.com/question/10053651

#SPJ4

Even if the recipe calls for an acidic ingredient, you can still use baking powder. This is something I frequently do when I add buttermilk or sour cream to cake batter.

The ideal answer is C.

For instance, baking ammonia is particularly effective as a leavening ingredient for low-moisture products with wide surface surfaces and high baking temperatures (less than 3% moisture in the baked product). Crackers, biscotti, and tiny, dry cookies are examples of effective applications.

The strongest form of flour, white bread flour has a high protein content (12–14%) and offers a lot of structure.

To know more about baking powder visit:-

https://brainly.com/question/28780578

#SPJ4

The electronic configuration of Ti is d)[Ne]3d²4s². The electronic configuration of Fe2+ is b)[Ar]4s²3d⁶. The total number of electrons in the 3d orbitals of Copper is E)10. The molecule 1-10phenanthroline is b)bidentate ligand and coordination number and oxidation number of (Cr(NH₃)₂(en)Cl₂ is E) CN = 6; ON = +2

A) The electron configuration of a Ti atom is d) [Ne]3d²4s².

This is the correct answer because Titanium (Ti) is a transition metal with atomic number 22. Therefore, it has 22 electrons with the following configuration: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d² 4s².

B) The electron configuration of a Fe2+ ion is b) [Ar]4s²3d⁶.

This is the correct answer because Iron (Fe) is a transition metal with atomic number 26. Therefore, it has 26 electrons with the following configuration: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s². When it forms a Fe²⁺ ion, it loses two electrons from the 4s orbital, leaving [Ar]4s²3d⁶ as the electron configuration.

C) The total number of electrons in the 3d orbitals of a copper atom is E) 10.

This is the correct answer because Copper (Cu) is a transition metal with atomic number 29. Therefore, it has 29 electrons with the following configuration: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s¹. Therefore, the total number of electrons in the 3d orbitals is 10.

D) b) It would be expected to be a bidentate ligand. This is the correct answer because 1,10-phenanthroline is a bidentate ligand, meaning it can bind to two electron-rich sites at the same time. It binds to the metal center through its nitrogen atom and an oxygen atom. Therefore, it is expected to be a bidentate ligand.

E) In the complex ion (Cr(NH₃)₂(en)Cl₂, the oxidation number of Co is +2 and the coordination number is 6. Hence the correct option is E).

To know more about complex ions, click below:

https://brainly.com/question/27289242

#SPJ4

Answer: B. [Ar] 4s23d2

Explanation:

A.[Ar]4s23p2

B.[Ar]4s23d2

C.[Ar]4s24d2

D.[Ar]4s24p2

Q = 1.161 J/kg of heat is required to melt 99.9 g of solid acetic acid (HCH,CO2). Q = mL(Latent heat is the energy emitted or absorbed by a body while changing it state ). (Latent heat is the energy released or absorbed by a body while changing it state ).

Apply the equation Q = mL where:

Energy is Q. (J)

m = Mass (g)

L = Acetic acid's latent heat of fusion 192(J/g) = J/g

Q is equal to 0.099 kg times 11.73 kj/mol.

Q = 1.161J/kg.

Latent heat is the amount of energy that a substance experiencing a change in state, such as ice turning into water or water turning into steam, can absorb or release while maintaining a constant temperature and pressure. Types: The material exists in three states: solid, liquid, and gaseous.

Heat that can actually be felt is considered to be sensible heat. Instead of the phase shifting, energy is what causes the temperature to vary as it moves from one system to another. For instance, it warms the water instead of melting the ice.

Learn more about specific heat on:

https://brainly.com/question/11297584

#SPJ4

Answer:

Count each type of atom in reactants and products. ...

Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances. ...

Repeat steps 1 and 2 until the equation is balanced.

Explanation:

MARK ME AS BRAINLIEST ♥️

Temperature is supplied to us as 225 K. The reduction potential potentials will be used to get it equilibrium constant for the this reaction.

Definition of EQUILIBRIUM as a noun in the Britannica Dictionary. [noncount] 1. a condition when conflicting forces or acts are matched so that neither is stronger or more significant than the other.

The forces that affect the body must balance out with an equivalent and opposing force for there to be a condition of equilibrium. The physiological state of equilibrium, wherein forces internal and external are all in balance, in an active moving animal. The system is hence stable.

To know more about equilibrium visit:

https://brainly.com/question/29901689

#SPJ1

a. Carbon tetra chloride is used as a solvent in the preparation of alkynes through the process of dehydrohalogenation. It acts as a reactant in the reaction, where it is converted into a chloride ion and a molecule of acetylene.

b. Hydrogen bromide is used in the preparation of alkynes through the process of bromination. It acts as a reactant in the reaction, where it is converted into a bromide ion and a molecule of acetylene. It is typically used in the presence of a Lewis acid catalyst, such as aluminum chloride, to facilitate the reaction.

Answer: A. Carbon tetrachloride (CCl4) is used as a solvent and a reactant in the preparation of alkynes through a reaction known as the chloroformic esterification or the Wurtz reaction. In this reaction, an alkyne is treated with CCl4 and sodium metal to produce a chloroformate ester, which can then be hydrolyzed to the corresponding carboxylic acid.

b. Hydrogen bromide (HBr) is used in the preparation of alkynes through a reaction known as the bromination of alkynes. In this reaction, an alkyne is treated with HBr and a Lewis acid catalyst to produce a geminal dibromide, which can then be hydrolyzed to the corresponding alkyne. This reaction is useful for the synthesis of alkyne compounds that are not readily available from other sources.

Both CCl4 and HBr are commonly used reagents in organic chemistry due to their reactivity and versatility. They can be used to synthesize a wide range of compounds, including alkynes, by reacting with various organic compounds under appropriate conditions.

Cyclohexane (C6H12C6H12), a cyclic chemical utilized in the production of nylon and discovered during the distillation of petroleum, is shown in three dimensions.

Cyclic structure is defined as a substance where at least some of the atoms are linked together to form rings. The number of atoms in a ring can range from three to hundreds. The VSEPR shape of the caffeine molecule is trigonal planar. There is a 120 degree angle between each atom.

Both pyrimidinedione and imidazole rings are heterocyclic rings; pyrimidinedione rings have a 6-member structure and two nitrogen atoms, whilst imidazole rings have a 5-member structure.

Thus, cyclohexane (C6H12C6H12), a cyclic chemical utilized in the production of nylon and discovered during the distillation of petroleum, is shown in three dimensions.

To learn more about cyclic structure, refer to the link below:

https://brainly.com/question/9408873

#SPJ1

Action potential would not be possible because ions would not be able to move across the plasma membrane without the channels provided by proteins.

When the membrane potential of a particular cell site rapidly increases and decreases, an action potential happens.  Following this depolarization, nearby areas also experience depolarization. Excitable cells, which include neurons, muscle cells, and some plant cells, are a class of animal cells that exhibit action potentials.

Larger protein molecules are integrated within a lipid bilayer that makes up a cell membrane. The lipid bilayer serves as an insulator because it impedes the flow of electrically charged ions very effectively.

Action potentials are produced by channel proteins, which change their state from closed to open depending on the voltage differential between the cell's interior and exterior.

Therefore, action potential is not possible without proteins.

To find more on action potential, refer here:

https://brainly.com/question/4305583

#SPJ1

1) Electron pair geometry - tetrahedral

Molecular geometry - bent

2) Electron pair geometry - tetrahedral

Molecular geometry - bent

3) Electron pair geometry - tetrahedral

Molecular geometry - linear

4) Electron pair geometry - tetrahedral

Molecular geometry -  trigonal bipyramidal

5)  Electron pair geometry - trigonal planar

Molecular geometry -  trigonal planar

We know that a compound would have its structure based on the number of electrons pairs that can be found on the valence shell of the atom. According to the valence shell electron pair repulsion theory, the electron pairs that surround the valence shell would be the major determinant of the structure of the compound.

We also have to recall that the number of the lone pairs and the bond pairs in the compound are also a key as we want to determine the structure. This is because, while all the electron pairs count towards the electron pair geometry, the bond pairs count towards the molecular geometry of the compound.

Learn more about molecular geometry:https://brainly.com/question/7558603

#SPJ1

The product of this reaction is an alkene, specifically 1-butene: CH3CH=CHCH3.

In this reaction, the primary alcohol (CH3CH2CH2CH2OH) is converted to an alkene (CH3CH2CH=CH2) by the addition of H2SO4 as an acid catalyst. The E2 reaction involves the abstraction of a proton from the carbon adjacent to the alcohol, forming a double bond and releasing a molecule of water in the process.

Define primary alcohols?

Primary alcohols are organic compounds containing an alcohol functional group with a carbon atom that has no alkyl substituents. Primary alcohols usually have the general formula CnH2n+1OH, where n is the number of carbon atoms in the molecule. Examples of primary alcohols include ethanol, methanol, propanol, and butanol.

To know more about Primary alcohols,

https://brainly.com/question/22806847

#SPJ4

Answer:

To determine the final temperature (in °C) of a vessel that is calibrated to initially read 1.00 atm at 0.00 °C if the pressure changes to 1.25 atm, we can use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.

Since the volume, number of moles of gas, and the ideal gas constant are all held constant in this problem, we can rearrange the equation to solve for T:

T = (PV)/(nR)

Substituting the given values into the equation, we get:

T = (1.25 atm * V)/(nR)

= (1.25 atm * V)/(1R)

Since the initial pressure and temperature of the vessel are 1.00 atm and 0.00 °C, respectively, we can use the ideal gas law equation to solve for the initial volume of the vessel:

V = (nRT)/P

= (1 * R * 0.00 °C)/(1.00 atm)

= 0

Since the volume of the vessel is 0, the final temperature of the vessel cannot be determined using the ideal gas law equation.

Therefore, it is not possible to determine the final temperature of the vessel in this situation.

pH plus pOH equals 14. POH equals -log[OH-]. The pOH is a measure of a solution's basicity, whereas the pH is a measure of a solution's acidity.

The concentration of hydrogen ions in a solution is gauged by its pH value. The concentration of hydroxide ions in a solution is determined by its pOH value. The formula pH + pOH = 14 relates the pH and pOH.

You must know the hydroxide ion concentration in moles per liter to calculate the pOH of a solution. The following expression is used to calculate the pOH: pOH equals -log [OH-].

pH of oranges 3.5

pH of rainwater 6.2

pH of milk of magnesia 10.5

pH + pOH = 14

To know more about pOH visit:-

https://brainly.com/question/17144456

#SPJ4

Answer:

2 moles

Explanation:

A liquid has a volume of 4 mL and a mass of 24 g, 6gm/mol is the density of the liquid.

Density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. The unit of density that is most frequently used is grams per cubic centimeter, or gm/mol.

One of an object's most significant and practicable physical characteristics is density. Densities are often used to identify pure substances, classify mixtures, and estimate their composition.

To calculate volume of a substance, we use the equation:

Density = Mass/volume

We are given:

Mass of liquid = 24 g

Volume of liquid = 4 ml

Putting values in above equation, we get:

density = 24 gm /4 ml

or, density = 6 gm/mol.

Hence, the density of liquid is 6 g/ml

To know more about density refer to:

https://brainly.com/question/1354972

#SPJ1

The mass of the hydrogen gas produced if 3.9 moles of tin react is equal to 7.9 g.

A balanced chemical equation in which the number of atoms of every type of element is same on the both sides of the reaction. The law of conservation of mass is followed by every balanced chemical equation.

The total mass of the elements on the reactant side is equal to the total mass of elements on the product side in a balanced chemical equation according to this law.

Given a balanced chemical equation of the reaction of the tin and HF:

[tex]Sn (s) + 2 HF (g) \longrightarrow SnF_2 (s) + H_2(g)[/tex]

One mole of tin produces hydrogen gas = 1 mol

Then 3.9 mol of tin produces hydrogen gas = 3.9 mol

The mass of 3.9 mol of hydrogen gas = 3.9 ×2 = 7.8 g

Learn more about the balanced chemical equation, here:

brainly.com/question/28294176

#SPJ1

Avoid contact with eyes, skin, and mucous membranes as both copper (II) chloride and barium chloride are extremely poisonous when consumed.

The potassium ion (K+) emits light in two different colours. By removing the main colour as the potassium burns, you can see the "underlying" hue by using the cobalt glass.

Avoid contact with eyes, skin, and mucous membranes as copper(II) chloride is mildly poisonous. Body tissue is sensitive to lithium chloride. Before throwing the wooden splints in the trash, rinse them to prevent trashcan fires. Put on chemical splash goggles, gloves, and an apron to protect your skin.

To know more about barium chloride visit :-

https://brainly.com/question/29376445

#SPJ1

You would expect the viscosity of n-pentane to be larger mainly because the cylindrical shape results in stronger dispersion forces when compared to the other hydrocarbon.

It can be seen that the surface area of ​​pentane increases because all carbon atoms are densely packed in neopentane. Therefore, the van der Waals forces are stronger in pentane and the intermolecular forces are stronger. Pentane is therefore the most vicious of the pair.

n-pentane has a higher boiling point than neopentane. The linear form of n-pentane mixes well with other n-pentane molecules, forming well-compacted layers of solids that are more difficult to separate. Viscosity is determined by the strength of the intermolecular forces, especially the shape of the molecules in the liquid.

Learn more about The viscosity here:- https://brainly.com/question/2684299

#SPJ4

The volume of 0.240 M KOH to react completely with 11.4 ml of 0.110 M sulphuric acid is 5.225 ml.

Molarity of a solution is the ratio of the number moles of solutes to the volume of solution in liters. Molarity is most common term used to express the concentration of a solution.

Let the volume and molarity of the titrant be V1 and M1 respectively and the volume of molarity of the analyte be V2 and M2 then,

M1 V1 = M2 V2.

Given volume of H₂SO₄  = 11.4 ml

Molarity = 0.11 M

Molarity of KOH = 0.24 M

volume of KOH = (11.4 ml × 0.11 M) / 0.24 M

                         = 5.225 ml.

Hence, the volume of KOH needed for the titration with sulphuric acid is 5.2 ml.

To find more on molarity, refer here:

http://brainly.com/question/16727614

#SPJ1

Pentane, which has the chemical formula C5H12, reacts with oxygen to produce carbon dioxide and water according to the following balanced chemical equation:

2 C5H12 + 25 O2 -> 10 CO2 + 12 H2O

To determine the mass of carbon dioxide produced when 18.7 grams of pentane is burned, we can use the stoichiometry of the chemical reaction. Stoichiometry is the study of the quantities of reactants and products in a chemical reaction, and it allows us to predict the amount of a product that will be produced based on the amount of reactant consumed.

Since the chemical equation is balanced, we know that for every 2 molecules of pentane that react, 10 molecules of carbon dioxide are produced. This means that for every 2 grams of pentane that react, 10 grams of carbon dioxide will be produced.

Since 18.7 grams of pentane is equivalent to 18.7 / 2 = 9.35 moles of pentane, we can use this value to calculate the number of moles of carbon dioxide produced:

9.35 moles of pentane * (10 moles of CO2 / 2 moles of C5H12) = 9.35 * 5 = 46.75 moles of CO2

To convert the number of moles of carbon dioxide to mass, we can use the molar mass of carbon dioxide, which is 44.01 grams per mole:

46.75 moles of CO2 * 44.01 grams/mole = 2068.7 grams of CO2

Therefore, if 18.7 grams of pentane is burned, approximately 2068.7 grams of carbon dioxide is produced.

Answer:

Any Group 2A element (Be, Mg, Ca, Sr, Ba, Ra)

Explanation:

According to the Octet Rule, Sulfur would want to gain two electrons in its outermost shell to achieve an octet (8 total electrons).  The elements that could accomplish this in a one-to-one ratio would be Group 2A on the periodic table (alkaline earth metals).

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, alkaline earth metals are the suitable elements.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.

The compound that is ionic in nature can be dissociated very easily in water. Since ionic compounds are polar in nature, they readily dissolve in water.  The elements that could accomplish this in a one-to-one ratio would be  alkaline earth metals

Therefore, alkaline earth metals are the suitable elements.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

The half-life of the Cobalt-55 is equal to 17.4 hr.

The half-life of the radioactive isotope can be described as the time required to decrease its actual amount to half after disintegration. The half-life period of a radioactive material is independent of the original or initial amount of the material.

Given, the original amount of Cobalt-55, N₀ = 1.46 g

The remaining amount of Cobalt-55, N = 0.219 g

The time for which decay occurs, t =  2.00 days = 48 hrs

Consider that k is the rate constant of the decay of  Cobalt-55,

[tex]{\displaystyle k = \frac{2.303}{t} log\frac{N_o}{N}[/tex]

[tex]{\displaystyle k = \frac{2.303}{48} log\frac{1.46}{0.219}[/tex]

k = 0.0395 hr⁻¹

The half-life time of Cobalt-55 can be calculated from the below-mentioned formula:

[tex]{\displaystyle t_{1/2} =\frac{0.693}{k}[/tex]

[tex]{\displaystyle t_{1/2} =\frac{0.693}{0.0395}[/tex]

[tex]{\displaystyle t_{1/2} =17.5 \;hr[/tex]

Therefore, the half-life period of the given sample of the Cobalt-55 will be to 17.4 hours.

Learn more about the half-life period, here:

brainly.com/question/14521252

#SPJ1