how many moles Mg(OH)2 has in 0,05 kg from substance?

1. The key component represented in the model is the Reflection of light.

2. Bouncing back of light relationships are shown in the Figure 2 model.

Reflection is when mild bounces off an item. If the surface is smooth and bright, like glass, water or polished metal, the light will reflect at the same angle as it hit the floor. This is known as specular reflection. light reflects from a clean floor on the same angle as it hits the floor.

In line with the law of reflection, the attitude of prevalence equals the perspective of reflection. To view an image of an object in a mirror, you should sight alongside a line at the photo area.

Reflection is the bouncing back of light while it moves a easy surface. Refraction is the bending of light rays whilst it travels from one medium to some other.

Learn more about Reflection here:- https://brainly.com/question/26655381

#SPJ1

The binary ionic compounds for the given elements are KBr, [tex]CaH_2[/tex] , [tex]Li_3N[/tex], and [tex]AlCl_3[/tex] respectively.

Ionic compounds are neutral substances made of cations, which are positively charged ions, and anions, which are negatively charged ions. The name of the cation is written first, followed by the name of the anion, for binary ionic compounds (ionic compounds that only contain two types of elements).

The ions of two separate elements, one of which is a metal and the other a nonmetal, make up a binary ionic compound. For instance, sodium iodide, or NaI, is made up of iodide ions, or [tex]I^-[/tex] (elemental iodine is a nonmetal), and sodium ions, or [tex]Na^+[/tex] (because sodium is a metal).

The given element pairs for the following binary ionic compounds:

KBr - Potassium Bromide

[tex]CaH_2[/tex] - Calcium Hydride

[tex]Li_3N[/tex] - Lithium Nitride

[tex]AlCl_3[/tex] - Aluminum Chloride

Learn more about Binary ionic compounds here:

https://brainly.com/question/20437867

#SPJ4

The gas that will need the slowest time to get out of a gas syringe is helium.

Helium is the second lightest element, and it has a low boiling point of -456°C. As such, it will take longer than any other gas to escape from a gas syringe.

Helium is a noble gas and is less reactive than other gases, so it will not react with the needle as quickly. Helium also has low conductivity, which means it takes less energy to transport helium through an object than it does for other gases. In addition, helium is odorless and tasteless, so it won't create any unwanted odors or smells when you use it in your experiments.

To learn more about helium visit: https://brainly.com/question/1780577

The three step for the synthesis of 3-bromocyclopentene are: bromination, reaction with tert-butoxide and at last reaction with ester.

To know more about 3-bromocyclopentene visit:

https://brainly.com/question/12660830

#SPJ9

The term "ichnite" refers to preserved footprints, which are a sort of trace fossil and a window into of dinosaurs. They developed similarly to how our imprints do when we walk on squishy surfaces like mud.

Because they descended from the common ancestor of all dinosaurs, birds can be thought of as a living group of dinosaurs. There is no proof, however, that any dinosaurs, such as Tyrannosaurus, Velociraptor, Apatosaurus, Stegosaurus, or Triceratops, are still alive today, with the exception of birds.

Scientists already know that Earth was impacted by an asteroid or maybe a comet off the Mexico. Chicxulub, the subsequent 110-mile/80-kilometer wide crater, is assumed to have been the catalyst for the "impact winter" that wiped out the dinosaurs over a number of decades.

To know more about Dinosaurs visit:

https://brainly.com/question/7277813

#SPJ13

From the calculations, the energy of the ultraviolet waves is 1.7 * 10^-33 J.

The term wavelength has to do with the distance that have been covered by a wave. In this case, we are told that the photon is from the ultra violet portion of the electromagnetic spectrum. The question here is that we should find the energy of the  ultraviolet photon having a wavelength of 1.18 x 10^8 m.

Let us now look at the things that we have in the question as the parameters that could be used to solve the problem;

Wavelength of the wave = 1.18 x 10^8 m

Plank Constant = 6.6 * 10^-34 Js

Speed of light = 3 * 10^8 m/s

Now we have that;

E = hc/λ

E =  6.6 * 10^-34 Js *  3 * 10^8 m/s/1.18 x 10^8 m

E = 1.7 * 10^-33 J

Learn more about energy of a photon:https://brainly.com/question/2393994

#SPJ1

In order from highest to lowest energy, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves.

Radio waves lack the energy that microwaves do. There are even more in infrared, which is followed by visible, ultraviolet, X, and gamma rays.

In general, the electromagnetic spectrum is split into seven sections, rising in energy and frequency and decreasing in wavelength. Radio waves, microwaves, infrared (IR), visible light, ultraviolet (UV) light, X-rays, and gamma rays are some of the popular names for these phenomena.

Radio waves, microwaves, infrared, visible, ultraviolet, X-rays, and gamma rays are the seven different forms of waves. Gamma rays have the shortest wavelength and the highest frequency, whereas radio waves have the longest wavelength and lowest frequency.

Learn more about EM spectrum refer

https://brainly.com/question/23423065

#SPJ10

The evidence that might prove Tasha is right if she and Marco examine a cell through a microscope and Tasha suggests that the cell is a protist is the presence of organelles and cell nucleus.

A eukaryotic cell such as observed in protists contains organelles and a cell nucleus where the genetic material is found compartmentalized, conversely to bacteria which are prokaryotic cells that do not contain a cell nucleus nor membrane-bound organelles.

Therefore, with this data, we can see that eukaryotic cells contain cell nuclei and organelles.

Learn more about a eukaryotic cell here:

https://brainly.com/question/495097

#SPJ1

Answer

Explanation:

Give the names of all of the above acids

The shape becomes bent V-shaped AND, molecular geometry is a triangular planar shape.

In the hybridization model, the number of hybrid orbitals used by the central atom is the same as the number of electron groups around the central atom. Thus, 2 electron groups (linear) = sp hybridization

If there are only three total electron groups, holding the place where two of those are bonding groups and one is a lone pair. then the shape becomes bent V-shaped, 2 bonds and 1 lone pair the shape is bent. For sp² hybridized central atoms the only possible molecular geometry is a triangular planar shape.

To learn more about triangular planar visit:

https://brainly.com/question/995422

#SPJ4

Radiant Energy from the sun is the source of the energy that plant cells use for photosynthesis. The first response is the correct answer.

Nearly all of the energy on Earth comes from the sun. Through a process known as photosynthesis, it enables plants and other organisms to convert water and carbon dioxide into sugars.

The function of sunlight in photosynthesis is to supply energy. Heat and light are two different types of energy that the sun emits.

Chlorophyll can capture energy, which can then be converted into sugar during photosynthesis. Photosynthesis slows down when a plant receives insufficient sunlight. This implies that the plant's energy source—sugar—might not be getting to it in sufficient amounts. We can clearly see how crucial sunlight is to life.

To learn more about photosynthesis, refer to the answer below:

https://brainly.com/question/19160081

#SPJ1

Each of the following reactions shows a solute dissolved in water and is classified as a strong electrolyte, a weak electrolyte, or a nonelectrolyte.

Define strong electrolyte, non-electrolyte and weak electrolyte:

The complete dissociation of a substance into ions when dissolved in aqueous solution is known as strong electrolyte.

Whereas the substance that does not isolate completely into ions is known as non-electrolyte.

On the contrary, a substance that partially dissociates into ions when dissolved in its aqueous solution is known as weak electrolyte.

(a) x(s)  → x(aq)

It is a non-electrolyte as no dissociation of ions is taking place here.

(b) cd(aq) ⇌ c+ (aq)   +  d−(aq)

This reaction is in equilibrium state and partial dissociation of ions takes place, Thereofre, it is a weak electrolyte.

(c) yz(s)→y+(aq)   +  z−(aq)

This reaction is in non-equilibrium state and hence complete dissociation of ions taking place here. Thus, it is a strong electrolyte.

(d) pq(aq)  →   p+(aq)    +   q−(aq)

pq is a strong electrolyte as it dissociate complete into ions.

(e) r(l)→r(aq)

It is non-electrolyte as it does not produce ions.

If you need to learn more about electrolyte click here:

https://brainly.com/question/1581652

#SPJ4

Two stable isotopes of lithium, 6Li and 7Li, make up naturally occurring lithium; 7Li is the more prevalent of the two (92.5% natural abundance).

The total amount of protons and neutrons in an atom makes up the mass number. A whole number, that is. The average number of protons and neutrons among an element's natural isotopes is known as the atomic mass. It has decimal form.

The total number of protons and neutrons in an isotope's nucleus is referred to as the mass number. This is due to the fact that each proton and neutron has a mass of one atomic mass unit (amu). You may get the mass of the atom by multiplying the total number of protons and neutrons by 1 amu.

To learn more about Isotopes refer to:

https://brainly.com/question/14220416

#SPJ13

         Certain metal-based nanoparticles have the potential to interact with the hydrogen peroxide found in every cell and change it into a hydroxyl radical that can enter the nucleus and cause DNA damage.

     Scratch-resistant eyewear, crack-resistant paint, anti-graffiti coatings for walls, transparent sunscreen, stain-repellent fabrics, self-cleaning windows, and ceramic coatings for solar cells are all products made with nanoparticles today.

    In addition to living matter, naturally produced nanoparticles can also be found in volcanic ash, ocean spray, fine sand, and dust (e.g. viruses). The diversity of synthetic nanoparticles is on par with that of its counterparts in nature, if not greater.

    The usage of nanoscale materials in medications, medical devices, biologics, cosmetics, and food is anticipated to rise significantly in the coming years, according to the FDA, which has already assessed and authorized a few nanotechnology-based items.

To Learn more About Nanoparticles, Refer:

https://brainly.com/question/11955521

#SPJ13

Point on the number line represents the product point D

Number line is the pictorial representation of number on straight line called number line

Here given data is a number line in which 10 numbers are seen and this numbers are toward right side it represent positive numbers and toward left side it represent negative numbers so here the point d represent the product and point a represent the reactant so that's why point d which represent 10 are product

Know more about points

https://brainly.com/question/16309605

#SPJ1

The mass of unknown liquid is 2080g.

Let us take formula for calculating density

Density = [tex]\frac{mass}{volume }[/tex]

therefore , mass = [tex]density\times volume[/tex]

                             = [tex]2.6\times 800[/tex]

                              = 2080 g.

The mass is a quantitative measure of inertia in physics, a fundamental property of all matter. It is actually the resistance that a body of matter offers to change its speed or position under the influence of a force. The greater the mass of the object, the smaller the change caused by the force applied to it. In the International System of Units (SI), the unit of mass is the kilogram, which is defined as Planck's constant, which is defined as Planck's constant, which is equal to 6.62607015 × 10–3 joules per second. One joule equals one kilogram times one square meter per second.

To learn more about mass, refer;

https://brainly.com/question/28704035

#SPJ13

Sediments that have been cemented together become igneous rock. false

The rock pieces called as sediments dropped from the wind and air to make a layer and this can be buried under other layers of sediments . after a long time sediments that have been cemented together become sedimentary rock. sedimentary rock can change into igneous rock and metamorphic rocks. sediments are pieces of solid material that have been deposited on earth surface. formation of sedimentary rocks begins when weathering and erosion produce sediments. so the statement Sediments that have been cemented together become igneous rock is a false statement.

Thus, Sediments that have been cemented together become igneous rock. false.

To learn  more about sedimentary rock here

https://brainly.com/question/19141862

#SPJ1

Answer: 3 Figures

Explanation:

Calculate 345.009 g - 23.009 g and give your answer with the appropriate number of significant figures. 322.000 g.

there bud

When using a water-cooled condenser, the water should constantly move over the condenser. to make this happen, the water should flow in at the bottom part and should flow out at the top part.

Water cooled condenser is heat exchanger. it will removes heat from the refringent and transfer to the water running through. The advantages of this system is it is lasts year longer. it has higher heat transfer rate

Thus, When using a water-cooled condenser, the water should constantly move over the condenser. to make this happen, the water should flow in at the bottom part and should flow out at the top part.

To learn more about water cooled condenser here

https://brainly.com/question/14568643

#SPJ1

Mercury's molecules have more mass, Mercury's molecules are spaced closer together

We can argue that density is directly related to mass since density is defined as the ratio of an object's mass to its volume, i.e., the higher an object's mass, the higher its density. Mercury's density will be higher than that of liquid water since it has a higher mass than that of water. Since the molecules of mercury are more tightly spaced from one another than those of a liquid, the latter's molecules exhibit lower forces of attraction. Because an object's force of attraction is directly inversely proportional to its mass, the stronger the force of attraction, the larger the mass, which results in a high density.

To learn more about molecular model. Click, https://brainly.com/question/6363127

#SPJ4

The ranking of the transitions from lowest to highest energy, wavelength, and frequency is;

From the Bohr model of the atom, we know that an electron in the hydrogen atom is able to absorb a photon move from a lower to a higher energy level. This is what we refer to as the excitation of the electron in the atom.

Now we also know that the spectrum of the hydrogen atom can be explained on the  basis of the fact that electrons are able to move from a lower to a higher energy level and vice versa, the energy of each of the transition is dependent on the difference between the transition.

Learn more about Bohr model:https://brainly.com/question/3964366

#SPJ1

The ion of the element from above which has the greatest ionic radius is S²- ( sulphur ion )

The correct answer choice is option b.

It follows that distance between the nucleus of an ion to that till that point it influence on its electron cloud, is referred to as the ionic radius of an ion of an element. Within the context of this task, the atomic radius of sulphur ion is 184 ppm.

Furthermore more, this periodic trend of elements, that is, the ionic radius decreases across the period but increases down the group.

So therefore, we can correctly deduce from the explanation above that S²- has the largest ionic radius.

Read more on ionic radius/ ionic radii:

https://brainly.com/question/8137711

#SPJ1

The option that shows that the kinetic-molecular explanations of this principle is NOT correct is option B: The number of molecular impacts per unit area decreases at a higher temperature.

The assumption that matter is made up of microscopic particles that are always in motion forms the foundation of the kinetic-molecular theory, which explains the states of matter.

Therefore, based on the use of observable characteristics as well as the use of behaviors of solids, liquids, as well as gases are known to be explained by kinetic-molecular theory.

Learn more about kinetic-molecular theory from

https://brainly.com/question/11232625
#SPJ1

The separation technique used to make dirty water clear is filtration.

Filtration is a separation technique that uses a funnel lined with filter paper to hold the solids while allowing the liquid to pass through, separating the components of a combination that contains an undissolved solid in a liquid. Filtration can be carried out cold or hot, under vacuum or by gravity, and with either a Buchner or Hirsch funnel or a straightforward glass funnel. Whether a solid is to be isolated from a mixture or pollutants are to be removed, the precise technique utilized depends on the goal of the filtration.

In the given question it is mentioned that the water is muddy then the one first method to separate is filtration after this it can be followed by distillation by which we can get pure water from it.

To know more about Filtration visit the link:

https://brainly.com/question/11341937?referrer=searchResults

#SPJ1

If a scientist wants to create a pool of RNA molecules that are 40 nucleotides long and contain every possible combination of bases. The mass of RNA nucleotides needed to synthesize the pool of RNA molecules is 440 molecules of all four RNA.

All four RNA nucleotides combined will be required to create a pool of RNA molecules which containes every RNA molecule. This is due to that each position is to be occupied or filled by any of the four nucleotides which are-

An RNA nucleotide consist of three parts, they are -

Thousands of ribonucleotides gets initiated before the process of transcription occurs and the mRNA is formed. 100,000 or more proteins in the human body are synthesized from a different RNA nucleotides.

To learn more about RNA,

brainly.com/question/4120168

#SPJ1

M(molarity of the phosphoric acid solution)=0.13 mole/L

molarity is a measure of the concentration of solute in a solution.

EQUATION OF BALENCE REACTION---->

3NaOH + H3PO4 ---->Na3PO4+3H2O

n MOLE OF NaOH REQUIED n/3 MOLE OF H3PO4 to completely react.

formula required to find the molarity is

n= number of mole

M= molarity

V= volume

n=M×V

n=  0.2255 m×35.60 ml

n= 8.02 m mole.

and, mole of H3PO4 to completely react = n/3

=8.02 /3

=2.67 m mole

now, according to question-->

2.67 m mole=M×19.90 ml

concentation of the solute in phosphoric acid solution is 0.13 mole/L

LEARN MORE ABOUT MOLARTITY-https://brainly.com/question/26873446

#SPJ4

Explanation: First split the compound into individual ions and assign oxidation states. You can give oxidation states with the help of the image provided below. Just cross-multiply the subscript. Every compound is in the format (Cation Anion). You will assign a positive charge to the cation and a negative charge to the anion. The subscript is the number of cations or anions present.

Assuming that the product is only mono acetylferrocene, the percentage yield is 81.3%.

Ferrocene reacts with Acetyl chloride in the presence of anhydrous aluminum chloride to produce mono acetylferrocene.

Here, anhydrous aluminum chloride is only present as a catalyst, It does not participate in the reaction so we will not take it into our calculations.

So, in order to calculate the theoretical yield of the product let us find out the moles of ferrocene and acetyl chloride, so that we can find out on whose concentration the product is depending.

Moles = given mass of compound/molar mass of compound.

So, number of moles of ferrocene,

Molar mass of ferrocene = 186.04g.

Mass of ferrocene reacted = 100mg = 0.1g.

Moles of ferrocene = 0.1/186.04 = 0.0005373 moles.

Moles of acetyl chloride,

Volume of acetyl chloride = 40 microliters = 0.04 milliliters.

We know that,

Density = mass/volume

Density of acetyl chloride = 1.1gram per meter cube.

Mass of acetyl chloride = 1.1 × 0.04

Mass of acetyl chloride = 0.044g

Molar mass of acetyl chloride = 78.49g.

Moles of acetyl  chloride = 0.044/78.49

Moles of acetyl chloride = 0.0005375

As we can see, the number of moles of ferrocene are present in less amount, so ferrocene is controlling the yield of mono acetylferrocene.

Moles of ferrocene = Moles of mono acetylferrocene.

Molar Mass of mono acetylferrocene = 228.07 g

Now,

0.0005375 = m/228.07

m = 0.0005375 × 228.07

m = 0.123 grams.

Mass of mono acetyl ferrocene formed theoretically is 0.123grams.

Experimental yield = 100mg = 0.1 grams.

Percentage yield = experimental yield/theoretical yield × 100

Percentage yield = 0.1/0.123 × 100

Percentage yield = 81.3%

So, the percentage yield of the product is 81.3%

To know more about percentage yield, visit,

https://brainly.com/question/25996347

#SPJ9