how to find the latitude and longitude of an address

Answer:

F=ma,a=0.329m/second squared,m=1300kg,F=1300*0.329=4277N

Answer:

sodium chloride. .....

Answer:

A film transition is a technique used in the post-production process of film editing and video editing by which scenes or shots are combined. Most commonly this is through a normal cut to the next shot. Most films will also include selective use of other transitions, usually to convey a tone or mood, suggest the passage of time, or separate parts of the story. These other transitions may include dissolves, L cuts, fades (usually to black), match cuts, and wipes.

Explanation:

The B figure has got more gravitational potential energy because gravity can draw it up straight rather than in a fashion (A) that would leave it with less room to travel.

The work (energy exchanged) per mass that would be required to transport an object to a point from a set reference location is the gravitational attraction at that location. It mimics the electric potential, with mass acting as the charge. There is a negative potential at any finite distance because the benchmark location, where the potential is zero, is conventionally indefinitely far from any mass.

The subject of potential theory is based on the gravitational potential, sometimes referred to as the Newtonian potential in mathematics. The electrostatic and popular throughout the world fields produced by ellipsoidal bodies that are uniformly charged or polarized can also be resolved using this method.

To know more about Gravitational Potential Energy:

https://brainly.com/question/19768887

#SPJ2

Answer:

Given mass = 2kg, height = 10m,g = 9.8.

We know that Work done W = FD

= > W = (mg)(D)

= > W = (2 * 9.8)(10)

= > W = 196 Joules.

Explanation:

Yan :).

The linear speed of a point located on the 32nd parallel, as a result of Earth’s rotation is 392.91 m/s

We find the linear speed of a point on the 32nd parallel from v = rω where r = radius of 32nd parallel north = Rcos32° (since it is the radius of the small circle at the 32nd parallel) where R = radius of earth = 6,371,000 m and ω = angular speed of the earth = 2π/T where T = period of earth = 24h = 24 × 60 × 60 s = 86400 s.

So, v = rω

v = Rcos32° × 2π/T

v = 2πRcos32°/T

substituting the values of the variables into the equation, we have

v = 2πRcos32°/T

v = 2π × 6,371,000 m × cos32°/86400 s.

v = 2π × 6,371,000 m × 0.8480/86400 s.

v = 33947512.5035 m/86400 s

v = 392.91 m/s

So, the linear speed of a point located on the 32nd parallel, as a result of Earth’s rotation is 392.91 m/s

Learn more about linear speed here:

https://brainly.com/question/6969329

answer:

the first one  

Explanation:

i think it is this one because 4k is bigger than 2k . also it is asking which one has the lager magnitude so it is the first one

Answer:

-1.2×10^2 m

I hope this helps you

Answer:

Given: a projectile of initial launch velocity(V) and launch angle ∅ and no air resistance. At the maximum height, the projectile would have a zero contribution of speed from the vertical component(Vy) Therefore, if we say Vx=Vcos∅ is the only speed the projectile has at the instant of maximum height then we can replace Vx with 1/5V and write 1/5V=Vcos∅. Solving for the the launch angle ∅, gives Inverse Cos(1/5)=78.5 degrees.

Answer:

c

Explanation:

The changing of color of a substance is not necessarily an indicator of a chemical change. For example, changing the color of a metal does not change its physical properties. However, in a chemical reaction, a color change is usually an indicator that a reaction is occurring.

Answer:

...

Explanation:

I'm doing this for points sorry

Valid results are only obtained if each tube is identical because; effective comparison of the tested blood each time can only be achieved if the testing model is constant in which case each tube is identical.

Discussion:

During scientific tests such as that described in the question; it is important to keep all parameters of testing constant.

This is so because, the utmost motive of the testing model is to draw comparison. It is on this note that valid results are only obtained if each tube is identical.

Read more:

https://brainly.com/question/25786185

The key phrase which describes zero (0) initial velocity is from rest.

When the velocity of an object at initial time is zero (0), it implies that the change in the displacement of the object with time is zero

[tex]v= \frac{\Delta x}{\Delta t} \\\\v_0 = 0[/tex]

Generally, when an starts its motion from rest, the initial velocity of the object will be zero. As the object acquires more momentum, the velocity increases with time.

Thus, we can conclude that the key phrase which describes zero (0) initial velocity is from rest.

Learn more about initial velocity here:https://brainly.com/question/19365526

Answer:

A centripetal force

Explanation:

The type of force in the given scenario is tension. The correct option is c.

Tension is defined in physics as the pulling force conveyed axially by a string, cable, loop, or similar material, or by every end of a rod, truss member, or similar three-dimensional object.

Tension can also be defined as the action-reaction pair of forces acting at each end of said elements.

Newton's second law states that the tension in the rope must equal the weight of the backed mass.

Tension, the normal force, and friction are all examples of contact forces.

Since the weight is not moving, the acceleration is zero. Even if the acceleration is not zero, this equals zero.

Thus, the correct option is c.

For more details regarding tension force, visit:

https://brainly.com/question/2287912

#SPJ2

Your question seems incomplete, the missing options are:

Explanation:

what exactly are you asking for?

Answer:

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

To find the force applied we make force the subject in the formula above

That's

[tex]f = \frac{w}{d} \\ [/tex]

w is the workdone

d is the distance

From the question we have

[tex]f = \frac{1800000}{400} = \frac{18000}{4} = 4500\\ [/tex]

We have the final answer as

Hope this helps you

Answer:

Divide the number of times an event occurs by the duration of time to calculate frequency. For instance, Anna divides the number of webpage clicks (236) by the time spent on the site (one hour, or 60 minutes). She discovers that she gets 3.9 clicks every minute.

Explanation:

does this help?

Answer:

The correct answer is a.

A 12 volt car battery will produces more current than a 1.5 volt battery for a TV remote because the car battery has a greater difference in electric potential energy than a 1.5 Volt battery. The correct answer is D

The potential difference between any two point in a circuit is the work done when one coulomb of charge moves from one point to the other. Potential difference is a kind of electrical pressure difference between two point.

The difference in electric potential in a 12 Volt battery is greater than the difference in electric potential in a 1.5 Volt battery.

According to Ohm's law, Voltage supplied is proportional to current produced. That is, V = lR. Where R = resistance.

A 12 volt car battery will produces more current than a 1.5 volt battery for a TV remote because the car battery has a greater difference in electric potential energy than a 1.5 Volt battery.

Therefore, the correct answer is the option D

Learn more here: https://brainly.com/question/25344811

Answer: Quadrupled

Explanation:

Because when it’s doubled they are going to make another pair so 2+2=4

Answer:

-8.9×10-14=-89-14=-103°C

25°C=2km

-103°C=? Less

=-103/25×2km

=-8.24km

Answer:

1. A and C are balanced forces as all the forces get cancelled by the opposite and equal force.

2. B and D as in B the Net force is 5N to the right and in D the Net force is 20N to the right.

3. This would be all the unbalance forces which are B and D

4. B would be moving 5N to the right and D would move 20N to the right.

a. The coefficient of static friction between the chair and the floor is 0.67.

b. The coefficient of kinetic friction between the chair and the floor is 0.52.

Given the following data:

Scientific data:

a. To find the coefficient of static friction between the chair and the floor:

Mathematically, the force of static friction is given by the formula;

[tex]F_s = uF_n = umg[/tex]

Where;

Making μ the subject of formula, we have:

[tex]u=\frac{F_s}{mg}[/tex]

Substituting the given parameters into the formula, we have;

[tex]u=\frac{165}{25 \times 9.8} \\\\u=\frac{165}{245}[/tex]

μ = 0.67

b. To find the coefficient of kinetic friction between the chair and the floor:

Note: The normal force would be the same as above.

[tex]u_k = \frac{F_k}{F_n} \\\\u_k = \frac{127}{245}\\\\u_k =0.52[/tex]

Read more on force of static friction here: https://brainly.com/question/25686958

Questions And Answers About Air Resistance.

Question 1: What is Air resistance?

Answer: Air resistance is a force that is caused by air. The force acts in the opposite direction to an object moving through the air. A lorry with a flat front will experience high air resistance while a sports car with a streamlined shape will experience lower air resistance, allowing the car to go faster.

Question 2: What causes air resistance?

Answer: Air resistance, also known as drag, is a force that is caused by air, the force acts in the opposite direction to an object moving through the air. It is where air particles hit the front of the object slowing it down. The more surface area, the more air particles hit it and the greater the resistance.

Question 3: How can air resistance be overcome?

Answer: Two ways to reduce air resistance are stated: reducing the area in contact with air (by the cyclist ducking down or cycling behind someone else) and by being more streamlined (wearing smoother surfaces or a more streamlined helmet).

Question 4: What happens when air resistance increases?

Answer: As it gains speed, the object's weight stays the same but the air resistance on it increases. There is a resultant force acting downwards. Eventually, the object's weight is balanced by the air resistance. There is no resultant force and the object reaches a steady speed – this is known as the terminal velocity.

Questions And Answers About Water Resistance.

Question 1: What is Water resistance?

Answer: Water resistance is a type of force that uses friction to slow things down that are moving through water. ... Water resistance occurs because of the particles in the liquid. As an object moves through a liquid, it collides with the particles which cause it to slow down.

Question 2: What causes water resistance?

Answer: Water resistance doesn't have to be just water, however, it can happen to objects moving through any type of fluid. Water-resistance happens because of the particles in water or the fluid. As the object moved through it collides with the particles which try to slow it down.

Question 3: How is water resistance useful?

Answer: Like friction and air resistance, it SLOWS THINGS DOWN, trying to stop them from moving. Water resistance can also be useful at times. When you are swimming and you push against the water with your hands, the water-resistance pushes back and helps you to move forward. This also happens when you use oars to row a boat.

Question 4: Does water-resistant mean waterproof?

Answer: The technical definition of water-resistant is that it's able to resist the penetration of water to a certain degree, but not entirely. Waterproof technically means that it's impermeable to water, no matter how much time it spends in the water.

Hope This Helps...:)

Answer:Pulley , Wheel and axle , Screw , wedge , Incline

Explanation:

Answer: below .

Explanation:

Pulley , Wheel , axle , Screw , wedge , Incline

HOPE IT HELPS YOU .PLEASE GIVE BRAINLIEST .THANKS .