It is study of the relationships between heat, temprature, work and energy
A periodic digital waveform has a pulse width 25 and a period of 150 . Determine the frequency and the duty cycle
The frequency is 6.67 kHz and the duty cycle is:16.67%.
Frequency and duty cycle
Given:
Pulse width=25
Period=150
Frequency:
Frequency=1/(150×10^-6)
Frequency=1/0.00015
Frequency=6.666 kHz
Frequency=6.67 kHz (Approximately)
Duty cycle:
Duty cycle=(25×10^-6)/ (150×10^-6)×100%
Duty cycle=16.67%
Therefore the frequency is 6.67 kHz and the duty cycle is:16.67%.
Learn more about Frequency and duty cycle here:https://brainly.com/question/16030651
#SPJ1
A 100 MHz generator with Vg= 10/00 v and internal resistance 50 ohms air line that is 3.6m and terminated in a 25+j25 ohm load
The value of Vz at point z from the generator = 17.748 ∠ -107.62° V
Given data :
Internal resistance = 50 ohms
Vg = 10 ∠ 0° v
length of air line = 3.6 m
Terminating resistance = 25 + j25 Ω
First step : Determine the Total impedance
Total Impedance ( z ) = Rin + Rline + Rl + jXl
= 50 + 50 + 25 + j25
= 125 + j25 ≈ 127.47 ∠ 11.3°
Next step : Determine the current in the circuit
current ( I ) = Vg / z
= ( 10∠0° v ) / ( 127.47 ∠ 11.3° )
= 0.0784 ∠ -11.3 amp
Final step : Determine the value of Vz at point z from the generator
Vz = ( Vg + I * Ri ) - ( RI * I + Rline * I )
= ( 10∠0° + 0.0784 ∠ -11.3 * 50 ) - ( 25 + j25 + 50 * 0.0784 ∠ -11.3 )
= -5.37 - j16.91 ≈ 17.748 ∠ -107.62° V
Hence we can conclude that the value of Vz at point z form the generator 17.748 ∠ -107.62° V
Learn more about voltage : https://brainly.com/question/11288970
Hello your question is incomplete below is the complete question
A 100 MHz generator with Vg =10< 0 degree (v) and internal resistance 50-ohm is connected to a lossless 50-ohm air line that is 3.6m long and terminated in a 25+j25 (ohm) load.
Find (a) V(z) at a location z from the generate.
A double-threaded Acme stub screw of 2-in. major diameter is used in a jack having a plain thrust collar of 2.5-in. mean diameter. Coefficients of running friction are estimated as 0.10 for the collar and 0.11 for the screw.
a. Determine the pitch, lead, thread depth, mean pitch diameter, and lead angle of the screw
b. Estimate the starting torque for raising and for lowering a 5000-lb load.
c. What is the efficiency of the jack when raising the load?
d. Would the screw overhaul if a ball thrust bearing of negligible friction were used in place of the plain thrust washer?
A student borrows $60,000 for business school at 6.5% stated annual interest with equal monthly payments over 10 years. Consider this as a loan with no payments or interest during school so that the problem structure is equivalent to a standard loan received one period before the first payment. How much is the monthly payment?
Answer:
$681.29
Explanation:
The amortization formula seems to apply. The monthly payment on a loan of P at rate r for t years is ...
A = P(r/10)/(1 -(1 +r/12)^(-12t))
For the given loan parameters, the monthly payment is ...
A = $60,000(0.065/12)/(1 -(1 +0.065/12)^(-12·10)) ≈ $681.29
The monthly payment is $681.29.
The current standard for recovery only equipment is sae
Explanation:
I think is SAE standard J2810
Robert Hooke contributed which of the following to the field of bioengineering?
The first identification of DNA.
A full description of living cells.
The development of gene therapy.
An illustration of the fermentation process.
Robert Hooke contributed a full description of living cells to the field of bioengineering
Robert Hooke (1635 - 1703), an English scientist during his experiments with dead cork tissue observed that organisms were made up of cells. He published this in 1665 in his book Micrographia, in which contains different images of different types of plant cells. He coined the word 'cell' to describe the honeycomb like appearance of the cork tissue under the microscope.So, Robert Hooke contributed a full description of living cells to the field of bioengineering.
Learn more about robert hooke here:
https://brainly.com/question/24915231
what's make oil boil?
NO LINKS
what was the main drawback of ford's assembly line
A.)the cars broke down quickly
B.)production of the cars required many hours of labor
C.) The cars required a lot of fuel to run
D.)production was not flexible
Answer:
D. Im pretty sure at least. you're welcome
When is the output of an OR-gate LOW?
Answer:
The OR gate is a digital logic gate that implements logical disjunction (∨) from mathematical logic – it behaves according to the truth table above. A HIGH output (1) results if one or both the inputs to the gate are HIGH (1). If neither input is high, a LOW output (0) results.
8. What are two ways SpaceX plans to change personal travel?
Answer:
as all the people should go near stratosphere
A stress of 2500 psi is applied to a polymer serving as a fastener in a complex assembly. At a constant strain, the stress drops to 2400 psi after 100 h. If the stress on the part must remain above 2100 psi in order for the part to function properly, determine the life of the assembly.
Give the largest positive number that can be represented in 13 bits for the two cases:
a) Unsigned number, and b) Signed number
Show the binary, decimal, and hexadecimal representations of the number for each case
The largest positive number that can be represented in 13 bits for the two cases are
A) Unsigned number
The largest unsigned no can be represented with 13bits as[tex](2)^n - 1 = (2)^{13} - 1 = 8191[/tex]
In Binary - [tex](1111111111111)_2[/tex]
In decimal - [tex](8191)_{10}[/tex]
In hexadecimal - [tex](1FFF)_{16[/tex]
B) Signed number
The largest signed no can be represented with 13bit as[tex]2^n = 2^{13} = 8192[/tex]
The range is from [tex](2^n-1)[/tex]
therefore, the maximum value is [tex](4096)_{10}[/tex]
In binary - [tex](1000000000000)_2[/tex]
In hexadecimal - [tex](1000)_{16}[/tex]
For more information on Binary numbers, visit
https://brainly.com/question/21285223
The volume of microbial culture is observed to increase according to the formula
V(m^3)=e^t
where t is time in seconds
a,calculate the expression for V(in^3) in terms of t(minute)
b,
The expression of V(m³)=e^(t(s)) to make V in in³ and t in minutes is;
V(in³) = (¹/₆₁₀₂₄)a[tex]e^{\frac{1}{60}bt(h)[/tex]
We are given that;
Volume of microbial culture is observed to increase according to the formula;
V = e^(t)
where;
t is in seconds
V is in m³
We want to now express V in in³ and t in minutes.
Now, from conversions;
1 m³ = 61024 in³
Also; 1 second = 1/60 minutes
according to formula for exponential decay, we know that;
V = ae^(bt)
Thus, we have;
61024V = ae^(¹/₆₀b(t(h))
V(in³) = (¹/₆₁₀₂₄)a[tex]e^{\frac{1}{60}bt(h)[/tex]
Read more about subject of formula at; https://brainly.com/question/790938
A full visual analysis would require that a product be dismantled completely so that all of its components can be described.
False
O True
What will be the future of cyber security?
Fresh ideas or title to be researched for civil engineering individual final project for diploma students also can extend the topic later while doing degree as well? please help me I'm running out of time...
Answer:
What type of projects do civil engineers work on?
Civil engineers design major transportation projects. Civil engineers conceive, design, build, supervise, operate, construct and maintain infrastructure projects and systems in the public and private sector, including roads, buildings, airports, tunnels, dams, bridges, and systems for water supply and sewage treatment
Explanation:
In a modern industrial plant the most likely polyphase power system in use is a/an blank system
Answer:
three-phase
Explanation:
2-phase, 3-phase, and 6-phase systems are in use. The most common of these is 3-phase.
A modern industrial plant most likely uses a 3-phase system.
__
Additional comment
Serious research began on 6-phase power transmission systems in 1973. They have been shown to increase power transfer, and to reduce corona, magnetic fields, and audio noise compared to 3-phase systems. However, they are not in widespread industrial use.
For flow of a liquid metal through a circular tube, the velocity and
temperature profiles are u(r)=2Um[1-(r/ro)2] and T(r) - Ts
= C2 [1 – (r/r0)2],respectively, where C2 is constant. What is the value of the Nusselt
number NuD at this location?
Answer:
Known: Form of the velocity and temperature profiles at a particular axial location for flow in a circular tube. Find: Nusselt number at the prescribed.
Explanation:
9. An automobile's oxygen sensor output needs
to be checked. Technician A uses a digital
voltmeter to check this sensor's output.
Technician B uses an analog ohmmeter to
check this sensor's output. Who is right?
(A) A only.
(B) B only.
(C) Both A and B.
(D) Neither A nor B.
Answer:
the answer is Letter C
Explanation:
DON'T TRULY TRUST ME PLEASE..
1. Declare a variable named num with an
initial value of 0. Create a while loop that
will print "Keep going" as long as the value
of num is less than 5. Use window.alert()
for displaying the output.
2. Create a function named showProd that
returns the product of n1 and n2.
3. Using the new keyword, create an array
named info with three (3) values: your first
name, your nickname, and your last name.
The code to
Declare a variable and increment with a while loop until the variable is not less than 5Create a function that returns the product of two numbersUses the new keyword to create an arraywere written in JavaScript and are found in the attached images
Declaring a variableThe first code declares a variable called num and gives it an initial value of 0. It then enters a while loop that lauches a message box (using window.alert) to print the message "Keep going" as long as num remains less than 5.
If nothing is done within the loop to increment num towards the value 5, the loop will go on endlessly notifying the user to "Keep going".
So, an increment of 1 was added to the loop body to increment the variable num. This makes sure the loop terminates.
Creating a function that returns the product of two numbersHere, a function was created that receives two arguments (n1 and n2), then returns the product (n1 * n2)
Declaring an ArrayThis last code segment creates an array using the new keyword. The new keyword is generally used in constructing objects.
In this case the object constructed is an array having three strings;
my first namemy nickname, andmy last nameSee another solved JavaScript problem here https://brainly.com/question/23610566
The separation and purification process is used for which of the following purposes?
Household cleaning
Developing vaccines
Identifying chromosomes
Documenting chemical reactions
The separation and purification process is used for DEVELOPING VACCINES. The development of vaccines must follow strict guidelines.
A vaccine is a biological preparation used to protect against harmful diseases (e.g., viruses) in a simple and safe manner.
Vaccine purification is a strict process consisting of clarification, concentration and chromatography in order to separate the extract that contains the active principle of the vaccine.
The techniques used for vaccine filtration include membrane filtration, depth filtration and centrifugation.
Learn more about vaccines here:
https://brainly.com/question/6683555
Which prosses uses a die and press to form parts
Answer:
stamping
Explanation:
Technician A says that primary vibration is created by slight differences in the inertia of the pistons between top dead center and bottom dead center. Technician B says that secondary vibration is a strong low-frequency vibration caused by the movement of the piston traveling up and down the cylinder. Who is correct? O A. Neither Technician A nor B OB. Technician B O C. Both Technicians A and B D. Technician A
Neither technician Technician or B is correct in the statement above.
What leads to primary vibration?Vibration is a factor that is said to be caused by one or more other factors that occur together at any given time.
This can be due to actors such as imbalance, misalignment, wear and looseness and others. An imbalance occurs due to a "heavy spot" that is found inside a rotating component and it will lead to vibration when the unbalanced weight is said to rotates in circles round the machine's axis.
Learn more about primary vibration from
https://brainly.com/question/7228243
Cellular network towers are configured in such a way so that they avoid what type of problem?
Answer:
They are configured this way to avoid overlap issues.
Explanation:
How many shift pulses would be required to serially shift the contents of one five-stage register to another five-stage register
Answer:
5
Explanation:
One pulse is required for each bit to be moved.
5 pulses are required.
I will give Brainliest, please help. :)
Jordan is mixing water and flour to make tortillas. The number of cups of water, w, needed for f cups of flour is described by the equation w = 0.75f.
What does 0.75 tell us in this situation?
Answer:
The ratio of water to flour needed to make tortillas, which is 3 : 4
Explanation:
100 w = 75 f
w/f = 75/100 = 3/4
convert number 23.35 in to binary
14. An engine is brought into the shop with a
backfiring problem. Technician A says this
can be the result of a cracked distrib-
Technician B says this problem can
be the result of a faulty carburetor accelerator
pump. Who is right?
problem
utor cap.
he
1.
(A) A only.
(B) B only.
(C) Both A and B.
(D) Neither A nor B.
Answer:
B. To accurately measure spark advance, use a timing light that incorporates an
ignition advance meter. The spark advance cannot be determined by listening to the way the engine sounds.
Write matlab code for motion of a car first order system
Answer:
Vehicle Dynamics for use with MATLAB/Simulink (VDMS) is a lumped-parameter, 15 degrees-of-freedom vehicle simulation program that reads input files containing chassis, suspension kinematics and compliances, tire, driveline, and aerodynamic inputs.
Explanation:
hope it helps you
Write the Boolean expression of the output (X) for the below Logic Diagram.
X= A+B.C+D
I hope it helps