Problem that can be caued by both the complete and incomplete
combution of methane in a ga fire
Oxidation of methane to soot:
CH4(g)+O2(g)⟶C(s)+2H2O(g)
Among the hydrocarbons is methane, CH4(g). Only the elements carbon (C) and hydrogen (H) are present in the complex. When methane burns with too much oxygen, it produces water vapor and carbon dioxide gas CO2(g) (g). Complete combustion is defined as combustion with extra oxygen.
Methane can be partially oxidized into a variety of compounds when it is burned inefficiently, including CO, methanol, formic acid, formaldehyde, and higher hydrocarbons.
Carbon monoxide is an extremely toxic gas. It is invisible and odorless. Without anybody being aware of it, malfunctioning gas fireplaces or boilers can poison the air in a room by emitting carbon monoxide.
To know more about combustion click here
https://brainly.com/question/14335621
#SPJ4
The complete question is
Problems that can be caused by both the complete and incomplete
combustion of methane in a gas fire.
1. An organ which receive the waste product carried by the blood.
4. It is a gas that the body needs.
6. It is a combination of hemoglobin and oxygen that enters the body.
7. The respiratory and digestive work as it absorbed
that being
distributed through the body.
10. The system responsible for digestion of food
Down:
2. The ability to maintain a relatively stable internal state that persist despite
changes in the world outside,
3. The respiratory and circulatory work together by exchanging of
5. The signal that circulatory system carries that control the speed of digestion.
8. The system responsible of exchange of gases
9. The system carries nutrients to the entire body cells.
1. Kidney receive the waste product carried by the blood.
2. Homeostasis is the ability to maintain a relatively stable internal state that persist despite changes in the world outside.
3. The respiratory system and circulatory system work together by exchanging of oxygen and carbon dioxide.
4. Oxygen is a gas that the body needs.
5. Chemical signals are carried out by circulatory system that control the speed of digestion.
6. Oxyhemoglobin is a combination of hemoglobin and oxygen that enters in the body.
7. The respiratory system and digestive system work as it absorbed oxygen that being distributed through the body.
8. The respiratory system is responsible for exchange of gases.
9. The circulatory system carries nutrients to the entire body cells.
10. The digestive system is responsible for food digestion.
Learn more about circulatory system visit:
brainly.com/question/29773718
#SPJ4
3) Which of the following is a true statement?
A: Ice cannot float on water.
B: Carbon is a part of the compound of water.
C: Water is a universal solvent.
D: Hard water is good for making soap lather.
PLS HELP ME PLS
Water is called a ‘universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance.
Is water called universal solvent?Water is referred to as a "universal solvent" because it has a considerably wider range of natural solvent properties than any other liquid. However, water is not capable of dissolving all compounds.
For instance, water cannot dissolve hydroxides, fats, or waxes because oppositely charged particles are not very soluble in water. Hydrogen and oxygen atoms are arranged polarly in water molecules.
The oxygen atom has a negative charge, while the hydrogen atom on one side has a positive charge.The water molecule can more easily attach to various compounds thanks to these charges.
To learn more about universal solvent refer to:
https://brainly.com/question/1834245
#SPJ1
Because it can dissolve a greater variety of chemicals than any other natural liquid, water is referred to as a "universal solvent," though it does not dissolve all substances. The option C is true.
The term "universal solvent" refers to water.In comparison to other liquids, water has a much larger spectrum of natural solvent qualities, earning it the moniker "universal solvent". Nevertheless, not all substances can be dissolved by water.
Because water is not highly soluble in oppositely charged particles, it cannot dissolve hydroxides, fats, or waxes, for example. Water molecules have polar arrangements of the hydrogen and oxygen atoms.
In contrast to the hydrogen atom on one side, which has a positive charge, the oxygen atom has a negative charge.
These charges allow the water molecule to more readily bind to different substances.
For more information about universal solvent kindly visit to brainly.com/question/1834245
#SPJ1
When using a dangerous chemical such as glutaraldehyde, what would the CDC recommend for reducing the risk of illness
Chemical: Wear the proper personal protective equipment (PPE) such as gloves, goggles, and an apron or lab coat.
What is chemical?Chemistry is the scientific study of the composition, structure, properties, and reactions of matter, especially at the atomic and molecular levels.
Use the chemical in a well-ventilated area.
Follow safety instructions and product labeling instructions precisely.
Avoid breathing vapors or mists of the chemical.
Immediately wash hands and exposed skin thoroughly with soap and water after contact with the chemical.
Store the chemical in a secure location away from food, drink, and other materials.
Dispose of the chemical properly.
To learn more about chemical
https://brainly.com/question/26487468
#SPJ4
How many moles of K2SO4 are in 216. g of K2SO4? (molar mass = 174.26 g/mol)
Answer:
1 grams K2SO4 to mol = 0.00574 mol
10 grams K2SO4 to mol = 0.05739 mol
50 grams K2SO4 to mol = 0.28693 mol
100 grams K2SO4 to mol = 0.57386 mol
200 grams K2SO4 to mol = 1.14772 mol
500 grams K2SO4 to mol = 2.86929 mol
1000 grams K2SO4 to mol = 5.73858 mol
The following data was collected when a reaction was performed experimentally in the laboratory.
Reaction Data:
Reactants:
Fe2O3 (3 moles)
Al (5 moles)
Products:
Al2O3 (?)
Fe (?)
Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount.
Please be thorough. I am in agony at this question and I need the most help I can get. Thanks
According to the data collected during the experimental reaction in the laboratory, and the balanced equation of the reaction, 5 moles of iron (Fe) and 2.5 moles of aluminum oxide (Fe2O3) were produced.
Determination of the maximum amount of Fe that was produced during the experiment.Balanced equation of the reactionFe2O3 + 2Al → 2Fe + Al2O3
Limit reagent determinationIf 1 mole of Fe2O3 is combined with 2 moles of Al
So 3 moles of Fe2O3 combine with x moles of Al
X moles of Al = 3 moles Fe2O3 x 2 moles Al / 1 mole Fe2O3 = 6 moles
Limiting reagent: Al, because there are only 5 moles available
Determination of the amount of iron producedIf 2 moles of Al produce 2 moles of Fe
So 5 moles of Al produce x moles of Fe
X moles of Fe = 5 moles of Al x 2 moles of Fe / 2 moles of Al = 5 moles
Determination of the amount of aluminum oxide producedIf 2 moles of Al produce 1 mole of Fe2O3
So 5 moles of Al produce x moles of Fe2O3
X moles of Fe = 5 moles of Al x 1 mole of Fe2O3 / 2 moles of Al = 2.5 moles
Explanation about the procedures used to determine the amount of ironBy establishing the balanced equation of the reaction and the stoichiometric relationships, the amount of limit reagent is first determined and with this data, the moles of products are later determined.
Learn more about data was collected when a reaction was performed experimentally in the laboratory at https://brainly.com/question/29100434
#SPJ4
In an experiment, potassium chlorate decomposed according to the following chemical equation.
2 KClO3 → 2 KCl + 3 O2
If the mass of potassium chlorate was 240 grams, what is the mass of oxygen gas formed?
Answer Choices:
A)
94. 03g
B)
1378g
C)
41. 8g
D)
612. 5g
Grams have been employed to estimate the mass of decomposition. Option C is correct, so.
The chemical response is as follows:
Every mole of must be broken to generate one mole of KCl.
180 kilograms of KCl was produced.
KCl produced in moles =
Produced moles of KCl equals moles.
Degradation of the same material is necessary for the creation of moles of KCl.
Therefore, the moles of the must be decomposed = moles.
Decomposition of mass equals moles of molecular weight
122.2 grammes of moles must be degraded from the mass.
Has to be decomposed for the production of 2 moles of KCl =
kilos.
Thus, kilograms has supplied the mass of decomposition. Option C is correct, however.
To know more about Chemical click here
brainly.com/question/13145357
#SPJ4
Which term refers to a substance that changes color when there is a certain concentration of hydrogen ions in a solution
Chemical Indicator refers to a substance that changes color when there is a certain concentration of hydrogen ions in a solution.
Chemical indicators are any substances that provide a clear indication—typically a change in color—of the presence or absence of a certain chemical species, like an acid or an alkali, in a solution. One such chemical is methyl yellow, which gives an alkaline solution a yellow color. When introduced to acidic or alkaline solutions, substances are considered indicators when their color changes. There are several indicators that are frequently used in laboratories, including litmus, phenolphthalein, and methyl orange. Litmus paper: It turns red in acidic solutions and blue in basic ones. Methyl orange: This chemical exhibits a red color in an acidic solution and a yellow color in a basic solution.
Learn more about Chemical indicators
brainly.com/question/13748767
#SPJ4
How does thermal energy flow between a hot or cold pack and the atmosphere?
A. Both hot and cold packs absorb energy from the atmosphere.
B. Hot packs release energy into the atmosphere and cold packs absorb energy from the atmosphere.
C. Both hot and cold packs release energy from the atmosphere.
D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere
Thermal energy flow between a hot or cold pack and the atmosphere by the D. Hot packs absorb energy from the atmosphere and cold packs release energy into the atmosphere.
When a hot pack is applied to the skin, the heat energy stored inside the pack is transferred to the skin, by conduction, and the heat energy is absorbed by the skin. Cold packs work in the opposite way, the cold energy stored inside the pack is transferred to the skin and released into the atmosphere.
The heat energy is conducted out of the pack and then radiated out into the atmosphere in the case of a cold pack, and The heat energy is conducted into the pack and then radiated out into the atmosphere in the case of a hot pack.
Learn more about thermal energy flow here: https://brainly.com/question/4820001
#SPJ4
nitric acid, hno3, is classified as a strong acid in water. this means that it produces
nitric acid (HNO3) is classified as a strong acid in water, which means that it dissociates completely in water to produce hydrogen ions (H+) and nitrate ions (NO3-).
This is in contrast to weak acids, which only partially dissociate in water. Strong acids have a very low pH (typically less than 1) and are highly corrosive, making them useful for many industrial applications such as making fertilizers, explosives, and dyes. However, they can also be dangerous and must be handled with care. A strong acid is an acid that fully dissociates or ionizes in water, meaning it releases all of its hydrogen ions (H+) into solution. This makes the acid highly acidic and gives it a low pH (typically less than 1). Some examples of strong acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), nitric acid (HNO3), and perchloric acid (HClO4). Strong acids are highly reactive and can cause chemical burns and other damage if not handled properly. \
Learn more about strong acid here:
https://brainly.com/question/12811944
#SPJ4
in this lab, you perform the above reaction starting with 20.0 L of propane at STP. what volume of h2o will be produced
1 mole of any gas occupies 22.4 L volume. The molecular weight of water is 18 grams. Thus 18 gram of Water will also occupy 22.4 L.We know that at STP one mole of any gas occupies 22.4litres . It means that one mole of hydrogen also occupies 22.4litres of volume at STP. So 10moles of hydrogen gas will occupy =22.4×10=224litres of volume at STP.
How many moles are in 10 g aspartame?
A substance has 0. 0152088 moles per 10 grammes. One can use the equation grams = weight / molar mass to determine this. The volume of one mole of a chemical is represented by its molar mass on the chemical elements.
You would take its weight (10g) and multiply it by the material's molar mass to determine the number of molecules within 10g of a substance. For instance, if the material is water, its molar mass is 18. 015 g/mol, meaning that 10 g is comparable to 0. 555 molecules of water.
However, the formula moles = mass / molar weight can be used to determine the number of moles in an unit weight regardless of the substance. Therefore, there are 0. 0152088 mole in 10
To know more about Weight click here
brainly.com/question/10069252
#SPJ4
What is the relationship between the enthalpy (AH) and entropy (AS) of a
reaction that is never spontaneous?
OA. +AH,-AS
OB. -AH, +AS
OC. -AH-AS
OD. +AH, +AS
SUBMIT
The relationship between the enthalpy (ΔH) and entropy (ΔS) of a reaction that is never spontaneous is -ΔH, +ΔS option - B is correct answer.
A spontaneous reaction is what?When a reaction occurs spontaneously, the system doesn't require any additional energy input because the change in free energy is negative.
When the enthalpy change is negative and the entropy change is positive, the reaction is always spontaneous.
The free energy change is always positive and the reaction is never spontaneous if the reaction is endothermic (H positive) and the entropy change S is negative (less disorder).
Although a spontaneous reaction may result in an increase or decrease in entropy or enthalpy, it will always result in a decrease in free energy, which is a negative G.
To know more about enthalpy visit:
https://brainly.com/question/13996238
#SPJ1
1. How much energy (in calories and in Joules) will it take to raise the temperature of 75.0 g
of water from 20.0 to 55.0 °C? ( Specific Heat = 1 cal / ( g °C) and 4.184 J /(g°C) )
A. 2630 cal and 630. J
B. 2630 cal and 1.1 x 104 J
C. 1.1 x 10 + cal and 2630 J
D. 630. cal and 2630 J
E. None of these are correct.
I need help pls
Which type of Electromagnetic wave has wavelength similar to the size of a 1 Peso coin
The microwave wavelength is the same as a one peso coin.
As you know, a peso coin is 24 mm in diameter. So the question becomes, what does an electromagnetic wave with a wavelength of 24mm look like? Wave velocity v, frequency f, and wavelength λ are related to each other. v=fλ
The velocity v in vacuum is the speed of light C₀ = 299792458 m/s. Therefore, the frequency is.
f=[tex]\frac{299792458m/s}{0,024m}[/tex] = 12.5GHz
This is commonly called microwave and its frequency is called Ku band. It is commonly used in satellite communications.
Learn more about microwave visit:
brainly.com/question/13589613
#SPJ4
Draw two isomers of this, and name each one: C4H6
Two isomers are Butadiene Bicyclobutane.
What is isomers?Isomers are substances that contain precisely the same number of atoms, i.e., they have the exact same empirical formula, but they differ from one another by the arrangement of the atoms. Ethylbenzene, m-xylene, p-xylene, and o-xylene are a few isomers with the formula C8H10.The term "isomer" refers to molecules or polyatomic ions that have different configurations of atoms in space but the same number of atoms in their molecular formulas, or the number of atoms in each element. Isomerism is the presence or potential for isomers. Isomers may or may not have comparable chemical or physical properties.Isomerism results from the ability of atoms in a molecular formula to be organized in different ways, resulting in compounds with diverse physical and chemical properties. They number two.To learn more about isomers refers to:
brainly.com/question/26298707
#SPJ1
What determines the carrying capacity in an ecosystem?
To solve this we must be knowing each and every concept related to ecosystem. Therefore, the maximum number of species that a system can safely support determines the carrying capacity in an ecosystem.
What is ecosystem?An ecosystem is the fundamental fundamental unit of such an environment where living and nonliving creatures interact with one another, both of which are essential for the continuation of life on Earth.
The maximum number of species that a system can safely support is known as carrying capacity. The ability of an ecosystem to replenish the food, water, environment, or other essentials that populations have to thrive are just a few examples of the numerous variables that may affect an ecosystem's carrying capacity of a specific species.
Therefore, the maximum number of species that a system can safely support determines the carrying capacity in an ecosystem.
To learn more about ecosystem, here:
https://brainly.com/question/29775110
#SPJ1
A 325 0 g piece of gold at 427 degree C is dropped into 200.OmL of water at 22 0 degree C. Calculate the final temperature of the mixture. Specific Heat of gold
The final temperature of the mixture is 218.1°C.
The Specific Heat of gold 0.0123 J.
What is specific heat ?Specific heat is known to be the amount of energy required to raise the temperature of a unit mass of a substance by 1 degree. It is a physical property of matter, usually expressed in units of Joules/Kilograms/Kelvin (J/kgK).
Mass of gold = 325 g
Heat absorbed by water = mass of gold x specific heat x temperature change
325 x 0.128 x 405
Heat absorbed by water = 154,400 J
Heat capacity of water = mass of water x specific heat
200 x 4.184
Heat capacity of water = 836.8 J/degree Celsius
Final temperature = (heat absorbed by water ÷ heat capacity of water) + Initial temperature
Final temperature = (154400 ÷ 836.8) + 22
Final temperature = 218.1°C
Q = mcΔT
836.8 J/°C = 325 × c × (427°C - 218.1°C)
836.8 J/°C = 325 × c × 208.9
c = 836.8/(325 × 208.9)
c = 836.8/67,892.5
c = 0.0123 J
To learn more specific heat
https://brainly.com/question/21041726
#SPJ4
Using the table of average bond energies, estimate the energy needed to break the bonds of the reactants and the energy released when the products from for the reaction N2 + O2 –> 2NO. Note N2 has a triple bond and O2 and NO have double bonds.
The energy that is released for the breaking of bonds is 229 kJ/mol.
What is the energy released?We should be able to recall that the enthalpy of the reaction taken to be the energy that is evolved or absorbed in the reaction that is ongoing. We have to note that in the course of the reaction there would be the breaking and the making of bonds.
Now we know that;
The bond energy can be given as;
Sum energy of the broken bonds of reactants - Sum of the energy of the formed bonds
Hence;
(945 + 498) - 2(607)
1443 - 1214
= 229 kJ/mol
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
Phosphoric acid, H3PO4, is produced through the reaction between tetraphosphorus decoxide and water. Write an unbalanced formula equation including physical states for the reaction.
P4O10(s) + H2O(l) --> H3PO4(aq)
Phosphoric acid, also known as orthophosphoric acid, is a triprotic acid.It is commonly used in food and beverage production, as well as in fertilizers, detergents, and rust removers.It is produced through a chemical reaction between tetraphosphorus decaoxide and water.The reactants are tetraphosphorus decaoxide (white powder) and water (clear liquid).The resulting product is Phosphoric acid (clear, colorless liquid) which is commonly found in an aqueous state (aq).The chemical equation for the reaction is P4O10(s) + H2O(l) --> H3PO4(aq) (unbalanced)The equation indicates the physical states of reactants and products which is important in performing the reaction.Learn more about Phosphoric acid here:
https://brainly.com/question/15867951
#SPJ4
BRAINLIEST!!HELP PLEASEEEE2. Use the following chemical equation to answer the question.
4K(s) + O2(g) → 2 K20 (s)
If a staff member at a laboratory has 12. 0 grams of potassium metal, what is the
theoretical yield of potassium oxide (K2O) that the scientist could potentially
produce from the reaction with oxygen gas?
If a laboratory employee has 12.0 grammes of potassium metal, the theoretical yield of potassium oxide that even the scientist may theoretically make from the reaction with oxygen gas is 14.5 gram of K2O.
In chemistry, yield, also known as reaction yield, is a measurement of the number of moles of a product created in ratio to the reactant consumed in a chemical reaction, generally represented as a percentage. Before performing chemical reactions, it is necessary to know how many product will be produced with certain reactant quantities. This is referring to the theoretical yield.
This approach is useful for calculating the theoretical yield of such a chemical process. The yield of a reaction represents how much product is generated by that reaction. The theoretical yield is the amount of product predicted by stoichiometry, whereas the actual yield is the amount produced.
To learn more about Theoretical yield, here
https://brainly.com/question/14408642
#SPJ4
The amount of ascorbic acid, C6H8O6. in orange juice was determined by oxidizing the ascorbic acid to dehydroascorbic acid, C6H6O6. with a known excess of l2, and back titrating the excess I2 with Na2S203. A 5.00-mL sample of filtered orange juice was treated with 50.00 mL of excess 0.01023 M l2. After the oxidation was complete, 13.82 mL of 0.07203 M Na2S203 was needed to reach the starch indicator endpoint. Report the concentration of ascorbic acid in milligrams per 100
mL
There is 2.43 mg of ascorbic acid in the 5.00-mL sample, or 48.6 mg/100 mL of orange juice.
Explanation:
For i2+na2s2o3 titration,
I2 + 2 S2O3^-2 <--> 2 I^-1 + S4O6^-2
13.82 mL of 0.07203 M Na2S2O3 was needed to reach the starch indicator end point.
Number of moles of Na2S2O3 = 13.82*0.07203= 0.9954546 millimoles.
So, number of moles of excess I2 = 0.9954546/2 = 0.4977273 millimoles.
For oxidizing the ascorbic acid to dehydroascorbic acid
C6H8O6 + I2 --> C6H6O6 + 2 H+ + 2 I-
SO 1mole of I2 read for 1 mole of C6H8O6.
Initial I2 used = 50*0.01023 = 0.5115 millimoles.
Number of moles of I2 used = 0.5115 - 0.4977273 = 0.0137727 millimoles.
Number of moles of C6H8O6 in5 ml of orange juice = 0.0137727 millimoles.
Weight of C6H8O6 in5 ml of orange juice = number of moles * molecular weight = 0.0137727 * 176 = 2.4239952 mg
In 100 ml of orange juice = 2.4239952/5) *100 = 48.479904 milligrams per 100 mL. is the answer.
To learn more about ascorbic acid visit;
https://brainly.com/question/14793819
#SPJ4
The first substance is nitric acid, HNO3. Since this substance dissolves to generate an acidic solution, the bond between O and H in the structural formula NO2OH breaks when the substance dissolves, making it an oxyacid. The latter substance, Ni(OH)2, is apparently insoluble in neutral water, but will dissolve if the solution is acidic. This behavior is typical of substances that feature basic anions. The bond between Ni and O is the one that breaks when Ni(OH)2 dissolves. The hydroxide ion that is produced quickly reacts with protons in solution and cannot react again with Ni2 to form a precipitate.
Ni(OH)₂ is base but this is not strong base this is very weak base and this cannot gives OH⁻ after dissolving in H₂O . this is only dissolve in acidic solution.
Define acidic solution.A solution is said to be acidic if it contains more positively charged hydrogen ions (H⁺) than negatively charged hydroxide ions (OH⁻). Lemon juice and vinegar are typical examples of acids. The amount of OH ions is greater in bases. Baking soda and regular ammonia are common examples.
Acidic substances can typically be distinguished by their sour flavor. A basic definition of an acid is a molecule that can donate an H⁺ ion and can continue to be energetically favorable even after losing H⁺. Blue litmus paper has a reputation for turning red when exposed to acids. Bases, on the other hand, are distinguished by their bitter flavor and slick consistency.
To know more about acidic solution visit:
https://brainly.com/question/13208021
#SPJ4
It takes a water wave 5.2 seconds to travel between two docks there are 19 m apart. An observer notices that 20 crests pass the first dock in 17 seconds.
find the wavelength of the water waves.
Answer:
152.12
Explanation:
hope it helps
Kong Mali po sorry
Dry ice is solid carbon dioxide that is used in the transport of food and medicine. dry ice becomes a gas at –78.5°c without becoming a liquid first. what change of state is being described?
The surface temperature of a block of solid carbon dioxide (dry ice) is -78.5 degrees Celsius (-109.8 degrees F). Once it reaches this temperature, carbon dioxide completely bypasses the liquid state and transforms into a gas. One pound of dry ice produces 250 liters of carbon dioxide gas!
Carbon dioxide in the form of dry ice is employed. Sublimation is the process by which CO2 transforms from a solid to a gas without first undergoing a liquid phase, and it takes place at pressures lower than 5.13 atm and temperatures higher than 56.4 °C (216.8 K; 69.5 °F) (the triple point).
When a substance changes immediately from a solid to a gas without melting beforehand. The carbon dioxide is still present; it simply passes.
Learn more about dry ice
brainly.com/question/13972158
#SPJ4
Answer:
Sublimation
Explanation:
C
A sample of a gas has a mass of 14.2g and occupies a volume of 0.678 liters at 25 C and a pressure of 0.80 atm. what is the density of a gas under these conditions
The density of gas can change, in contrast to the density of solids or liquids. This is due to the fact that gas is not compact and that temperature and pressure have an impact on its molecules.
The formula is d = MP/RT, where d is the gas's density in kilograms per liter, M is its molar mass in grams per mole, P is its pressure in atmospheric pressure units, and R is the gas law constant. The equation demonstrates that the molar mass increases as gas density increases. The pressure and temperature parameters for the gas determine the gas's density. Gas can dramatically alter its volume with a change in pressure due to its strong compressibility. Therefore, changes in density (at low pressure) can be substantial.
Learn more about molar here-
https://brainly.com/question/12127540
#SPJ4
How do you calculate grams to molecules?
What volume of 0.75 M H₂SO4 is required to neutralize 25.0
mL of 0.427 M KOH?
A volume of 0.02845 L is required to neutralize this acid-base reaction.
To neutralize an acid with a base, you need to react with equal molar amounts of the two. The balanced chemical equation for the neutralization of sulfuric acid (H₂SO₄) with potassium hydroxide (KOH) is as follows:
H₂SO₄ + 2 KOH → K₂SO₄ + 2 H₂O
The molarity of a solution is a measure of the number of moles of solute per liter of solvent. To find out how many moles of H₂SO₄ you need to neutralize 25.0 mL of 0.427 M KOH, you first need to convert the volume of KOH to liters, using the conversion factor 1 L/1000 mL.
25.0 mL KOH × (1 L/1000 mL) = 0.025 L KOH
Then, use the molarity of the KOH solution to find out how many moles of KOH you have:
0.427 M KOH × 0.025 L KOH = 0.010675 moles KOH
Since the balanced chemical equation shows that 1 mole of H₂SO₄ reacts with 2 moles of KOH, you need twice the number of moles of KOH, or 0.010675 moles × 2 = 0.02135 moles H₂SO₄.
Finally, use the molarity of the H₂SO₄ solution to find out how much volume you need:
(0.02135 moles H₂SO₄) ÷ (0.75 M H₂SO₄) = 0.02845 L H₂SO₄
So you need a volume of 0.02845 L of 0.75 M H₂SO₄ to neutralize 25.0 mL of 0.427 M KOH. This is equivalent to 28.45 mL of 0.75 M H₂SO₄.
To know more about acid-base, refer at
https://brainly.com/question/3941445
Explain the relationship between an element's row number in the periodic table and the highest principal quantum number in the element's electron configuration. How does this relationship differ for main-group elements, transition elements, and inner transition elements
The row number in the periodic table corresponds to the highest principal quantum number (n) in the element's electron configuration, also known as the element's valence shell.
Difference between relationship of main-group elements, transition elements, and inner transition elements.For main-group elements, the highest principal quantum number increases from n = 2 in the first row to n = 3 in the second row and n = 4 in the third row. This means that main-group elements in the first row have their valence electrons in the 2nd energy level (n=2), elements in the second row have their valence electrons in the 3rd energy level (n=3) and elements in the third row have their valence electrons in the 4th energy level (n=4).
Transition elements have electron configurations that deviate from this pattern, they have electrons in higher energy level (n>3) but these electrons are not in the valence shell. They have a different valence electron configuration which allows them to exhibit multiple oxidation states, and also they have a d-block in their electron configuration
Inner transition elements also deviate from this pattern, they also have electrons in higher energy level (n>3) but these electrons are not in the valence shell. They have a different valence electron configuration which allows them to exhibit multiple oxidation states, and also they have a f-block in their electron configuration.
To know more about valence electron visit: https://brainly.com/question/2725863
#SPJ4
A student generates a plot of ln(k) vs ln[OH-].
The result yields a straight line with the equation: y = 1.18x + -3.80
According to this data, what is the order of the reaction in OH-, to the nearest whole number?
The order of the reaction is First Order with respect to the hydroxide ion (OH-) can be determined by examining the slope of the line generated in the plot of ln(k) vs ln[OH-]. In this case,
the slope of the line is 1.18, which indicates that the reaction is first-order with respect to OH-. The order of a chemical reaction refers to the power to which the concentration order of a reactant is raised in the rate equation. The rate of a reaction is typically described by the rate equation, which is a mathematical expression that relates the rate of the reaction to the concentrations of the reactants. The order of a reaction is determined experimentally by measuring the rate of the reaction at different concentrations of the reactants and fitting the data to a rate equation.
Learn more about the order of the reaction here:
https://brainly.com/question/8139015
#SPJ4