I am not sure what the answer would be.

(A) Sand is un soluble in water . NH4Cl is soluble in water.

(B) Mixture b is a type of  heterogenous mixture.

A mixture with an inhomogeneous composition is referred to be heterogeneous. There are at least two distinct phases that continue to exist with distinct features that vary in composition from one place to another. It is possible to distinguish the individual components of a heterogeneous mixture by looking at a sample.

The concept of a heterogeneous mixture is somewhat different in physical chemistry and materials science. A homogeneous mixture in this context is one in which each component is in a single phase, as opposed to a heterogeneous mixture, which has components in many phases.

A mixture is any combination of two or more chemically unaltered, pure substances that has not been altered in any way from its original state. Unlike other types of combinations, heterogeneous ones do not blend and have an uneven makeup.

To know more heterogenous mixture ,visit:

https://brainly.com/question/11148472

#SPJ9

Calculated with significant figures is 2804.4, which contains 5 sig figs and 1 decimal.

Three rules are used to determine the number of significant digits Non-zero numbers are always valid. All zeros between two significant digits are valid. Only trailing zeros or trailing zeros in the fractional part are significant. Enter a number or formula to calculate the number of digits and decimal places in your answer. contains 1 significant digit.

All zeros between two non-zero digits are valid. For example, 108.0097 contains 7 significant digits. Zeros to the right of the decimal point and to the left of non-zero digits have no meaning. For example, 0.00798 contained 3 significant digits. For example, the 3-digit power of 20,499 is 20,500. The first digit to round down is 9 so round up. 0.0020499 to 3 significant digits are 0.

Learn more about Significant figure here:-https://brainly.com/question/24491627

#SPJ1

The mass of water produced if 12.1 g of ethanol (C₂H₆O) undergoes the reaction is 14.2 g.

Ethanol is a natural compound. it is simple alcohol with the chemical components C₂H₆O. Its formula may be also written as CH₃−CH₂−OH or C₂H₅OH. Ethanol is a risky, flammable, colorless liquid with a characteristic wine-like odor and smelly taste.

Ethanol is used in the manufacture of medication, plastics, lacquers, polishes, plasticizers, and cosmetics. Ethanol is used in medicine as a topical antiinfective, and as an antidote for ethylene glycol or methanol overdose.

Balancing the reaction,

C₂H₆O (l) + 3O₂ (g) → 2CO₂ (g) + 3H₂O (l)

Mass of ethanol given = 12.1g

the molar mass of ethanol = 46 g

Therefore given mole = 46/12.1

                                    = 3.80 mole.

1 mole of ethanol = 3 moles of H₂O

∵ 46 g of ethanol = 54g of water

∴ 12.1 g of ethanol = 54g / 46 g × 12.1 g

                               = 14.2 g of ethanol produced.

Learn more about ethanol here:-https://brainly.com/question/13423304

#SPJ1

TT is an example of homozygous pure recessive.

When the gene pairs (sometimes referred to as alleles) that regulate a trait's development are identical, the trait is said to be homozygous. Being heterozygous for a trait means having multiple alleles for that trait. A homozygous trait will always show itself in the same way.

An organism could be homozygous dominant (TT) or homozygous recessive (RR) ( tt ). When an organism has two separate alleles (Tt) for the same gene, it is said to be heterozygous (hetero- means different).

To learn more about Traits click on the link below:

https://brainly.com/question/26434916

#SPJ9

He takes photos of every piece of evidence before it is sent to the lab is what Sergeant Jeffers who likes photo array will do in this case and is denoted as option B.

This is defined as the process in which something is examined and it is usually accompanied with thorough search for facts so as to get accurate and meaningful results.

The use of photo arrays for investigation means that photos of every piece of evidence is taken which is worked on by the professional through series of techniques so as to catch the culprit and ensure justice is served.

Read more about Investigation here https://brainly.com/question/25578076

#SPJ1

There are 5.403×10[tex]^23[/tex]  atoms of carbon in 25.6 grams of sucrose which is in relation with the number of moles.

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass  in grams present in one mole  of atoms is its atomic mass.

Number of atoms  of carbon can be determined by calculating number of moles of carbon which is 25.6/242.3=0.074 moles .As 1 mole has 6.022×10[tex]^23[/tex]  atoms

∴0.074 moles has 4.503×10²² moles

Number of carbon atoms in 1 molecule of sucrose is 12

∴number of carbon atoms in 4.503×10²² molecules is 12×4.503×10²²=5.403×10²³ atoms

Therefore, there are 5.403×10²³ atoms in 25.6 g of sucrose.

Learn more about moles,here:

https://brainly.com/question/26416088

#SPJ1

1) If the pressure increases, the equilibrium constant K does not change.

2) If the pressure increases, the concentration of H₂ decreases.

The reaction is given by:

CO + 2H₂    ⇄   CH₃OH            ΔH = -91.8 KJ

1) If the pressure increases, the equilibrium constant K does not change because the only factor affect the equilibrium constant k is the temperature.

2) If the pressure increases the equilibrium position shifted to right and increases the yield of product for this reaction .

                p ∝ n

Thus, using the given reaction

CO + 2H₂    ⇄   CH₃OH            ΔH = -91.8 KJ

1) If the pressure increases, the equilibrium constant K does not change.

2) If the pressure increases, the concentration of H₂ decreases.

To learn more about equilibrium reaction here

https://brainly.com/question/2009610

#SPJ1

The concentration of KOH solution if 15 cm³ of 0.5 M HCl are exactly neutralised with 24 cm3 of solution of KOH is 0.313M.

The concentration of a solution can be calculated by using the following formula;

C₁V₁/C₂V₂ = na/nb

Where;

According to this question, a reaction between hydrochloric acid and potassium hydroxide forms water and potassium chloride as follows:

HCl + KOH → KCl + H2O

This suggests that na and nb values are both 1.

15 × 0.5 = 24 × C₂

7.5 = 24C₂

C₂ = 7.5/24

C₂ = 0.313M

Therefore, the concentration of KOH solution if 15 cm³ of 0.5 M HCl are exactly neutralised with 24 cm3 of solution of KOH is 0.313M.

Learn more about molarity at: https://brainly.com/question/16587536

#SPJ1

The Possible sub-claim in relation to Investigating Energy Systems is the Solar Cell System does have energy.

Evidence is that -

As the sun shines on a solar panel, energy is captured by the Photovoltaic cells on the panel. This is significant as it generates electrical charges which causes the flow of electricity.

These are accelerated by shifting an internal electrical field within the cell. Therefore, a solar cell system is one that has amount of energy.

A solar cell is also known as a photovoltaic cell. It is an electrical device which uses a natural physical and chemical phenomenon, a photovoltaic effect to convert light energy directly into the electricity.

Solar cells are known as photovoltaic cells. These PV cells converts sunlight directly into electricity. Solar cells produces electricity in remote locations which allows machines to be powered very far from the nearest electrical outlet. Solar cells are reliable and low-maintenance source of renewable energy.

Therefore, A PV cell can reflect and absorb, or pass via light that strikes it. The semiconductor material in PV cell conducts electricity better than an insulator.

To learn more about Solar Cells,

brainly.com/question/28843907

#SPJ1

All the lead ions will not be removed and 6.502 ×10-8 moles of lead ions remain in solution.

The equation of the reaction is;

Pb(NO3)2(aq) +  Na2S(aq) ---------> PbS(s) + 2NaNO3(aq)

Number of moles of Pb(NO3)2 = concentration × volume

Number of moles of Pb(NO3)2 = 11.2 mL/100   × 7.10×10-3 M = 7.952 ×10-8 moles

Number of moles of  Na2S = 12.4 mL/1000 ×  0.0117 M = 1.45  × 10-8 moles

Since the reaction is 1:1, 7.952 ×10-8 moles of Pb(NO3)2 should react with  7.952 ×10-8 moles of Na2S in order to remove all the Pb^2+ ions but we have only 1.45  × 10-8 moles of  Na2S  hence all the lead ions will not be removed.

Amount of lead ions remaining =  7.952 ×10-8  -  1.45  × 10-8 moles

= 6.502 ×10-8 moles of lead ions

Learn more: brainly.com/question/13516179

The effect of botulinum toxin cannot be determined using a yeast.

Botulinum toxin is produced by the bacterium called Clostridium botulinum. It is a neurotoxin that affects the nervous system. It is done by inhibiting a chemical called as acetylcholine.

Acetylcholine is a neurotransmitter that carries the message from the brain. It relays the message thus resulting in movement. If it is inhibited, the person would be paralyzed.

Yeast is a single-celled organism. It does not have well-developed systems as in multicellular organisms. In addition to that, the test organisms used to measure the effect of toxicity should be similar genetically to humans which would result in higher efficiency.

Thus, yeast cannot be used to determine the effect of botulinum toxin

To know more about Yeast

https://brainly.com/question/14117480

#SPJ1

By balancing the element that appears in the fewest different formulas of the combustion reaction of propane, the coefficient that must be added to the CO₂ to balance the element C is 3.

A combustion reaction is a reaction that involves the release of large amounts of heat and light energy.

Combustion reactions include the burning of hydrocarbons in the air to produce carbon dioxide and water.

Considering the given question below:

What is the balanced equation of the reaction for the combustion of propane?

The balanced equation of the reaction for the combustion of propane is given below as follows:

C₃H₈ (g) + 5 O₂ (g) ---> 3 CO₂ (g) + 4 H₂O (l)

Learn more about combustion reactions at: https://brainly.com/question/9425444

#SPJ1

Ganymede is the largest satellite (moon) in the Solar System, larger than the planet Mercury. Ganymede is classified as a satellite instead of a planet as it orbits a planet, and not the Sun.

To learn more about satellites,

brainly.com/question/2477483

#SPJ1

Let's see the definition of each concept:

An element is a substance only formed by atoms of the same element. For example, Na (sodium), O2 (oxygen), C (carbon).

A compound is a substance formed by the combination of two or more elements, through a chemical bond. For example, H2O (water), and CO2 (carbon dioxide).

A pure substance can be an element or a compound, which is alone in the media. For example, the O2 present in an oxygen bullet is pure, because it is only oxygen.

A mixture is when you have 2 or more elements or compounds present in the same media. For example, the air is a mixture of oxygen and nitrogen.

Then, the answer is that NaCl is a compound and a pure substance.

The, new volume is 1200 L and new pressure is 25 kPa.

Given, temperature = 400 K

Pressure = 50 kPa

Volume = 3 L

V1/T1 = V2/T2

V2 = V1×T2 / T1

V2 = 400× 6/ 2

V2 = 1200 L

Hence, new volume is 1200 L.

P1/T1 = P2/T2

P2 = P1 × T2/ T1

P2 = 50 × 1000 × 200/ 400

P2 = 25000 Pa

Hence, new pressure is 25 kPa.

A gas is a set of molecules that do not cohere strongly sufficient to form a liquid or a strong. The quantity of a gas is, so long as the molecules fit into it, the extent of the container preserving the gas. In different phrases, the extent of a gas isn't always a belongings of the gas immediately, however a belongings of the box.

Learn more about volume here:- https://brainly.com/question/25736513

#SPJ1

Answer:Magnesium nitrate will react with sodium hydroxide to form magnesium hydroxide and sodium nitrate.

Explanation:

We have the responses as;

1) The  solution is unsaturated

2) The solubility is 30 g of copper(II)sulfate

3) The solubility is  100g of ammonia

The term solubility has to do with the amount of solute that can dissolve in  solution at a given temperature. Let us recall that a solution is composed of a solute and a solvent. The solvent is the medium wherein the solute is dissolved.

1) Given the fact that the solubility of ammonia in water at 40 degrees Celsius is actually about 300 g/L t the follows that If you dissolved 54 grams of ammonia in 100 grams of water at tat temperature, the solution is regarded as unsaturated.

2) if about 15 g of copper(II)sulfate dissolves in  100 g of water at  3○C

x would dissolve in 200 g of water

x = 15 g * 200 g / 100 g

x = 30 g of copper(II)sulfate

3) About 100g of ammonia could be dissolved in 50g of water at 150C.

Learn more about solubility:https://brainly.com/question/28170449

#SPJ1

Titration is a common laboratory method for quantitative chemical analysis to determine the concentration of an identified analyte. The reagent, sometimes referred to as the titrant or titrator, is prepared as a standard solution with a specified concentration and volume.

Titration is the continuous addition of one solution with a known concentration (referred to as a titrant) to a known volume of another solution with an unknown concentration when a reaction reaches neutrality, which is occasionally marked by a color change.

Utilizing methyl orange indicator, a sodium carbonate solution and a hydrochloric acid solution can be titrated. The solution will be mildly acidic at the end point when a weak base is titrated with a strong acid. The solution becomes slightly basic when a weak acid is titrated with a strong base because the salt that results will partially hydrolyze.

Below is a list of the chemical processes that took place during this titration.

NaCl(aq) + CO2(g) + H2O → Na2CO3(aq) + 2HCl(aq)

CO2(g) + H2O  →  CO32-(aq) + 2H+(aq)

Acid and base titrations have an end point when the acid and base amounts are chemically identical. When a strong acid and a strong base are titrated, the solution neutralizes at the end point.

To know more about titration, click on the link below:

https://brainly.com/question/11522314

#SPJ9

The equilibrium partial pressure of Nitrogen would be 0.0638 atm when a reaction vessel contains 4.5 atm of Br2 and 1.1 atm of NBr3.

To know more about equilibrium pressure visit:

https://brainly.com/question/17049019

#SPJ13

The time taken for 11.6% of the products to remain is 22.4 s.

The rate of reaction is the rate at which the reactants are depleted from the system or the rate at which the products appear in the system. Now we have a first order reaction. Recall that the formula of the first order reaction is written as;

ln[A] = -kt + ln[A]o

ln[A] = concertation at time t

t = time taken

k = rate constant

[A]o = initial concentration

Given that;

[A]  = 0.116[A]o and k = 0.0960 s−1

Then;

ln0.116[A]o = -0.0960t + ln[A]o

0.0960t  =  ln[A]o - ln0.116[A]o

0.0960t = ln([A]o/0.116[A]o)

0.0960t = ln(1/0.116)

0.0960t = 2.154

t = 2.154/0.0960

t = 22.4 s

Learn more about first order reaction:https://brainly.com/question/12446045

#SPJ1

In the longstanding war between coyotes and sheep ranchers in New Mexico, studies show that coyotes kill sheep. The most likely explanation for the similarity in the percentage of sheep lost in other areas is that Another predator was killing sheep. Option B

This is further explained below.

Generally, A biological relationship known as predation occurs when one creature, known as the predator, hunts down and consumes another organism, known as the prey.

It belongs to the same group of common feeding behaviors as parasitism, micropredation, and parasitoids. Parasitism is a subtype of parasitoids.

In conclusion, Studies have shown that coyotes are the aggressors in the conflict that has been going on for a long time in New Mexico between sheep farmers and coyotes.

The hypothesis that another kind of predator was responsible for the loss of sheep in the same proportion in other locations is the one with the highest probability of being correct. Alternative B

Read more about predator

https://brainly.com/question/3775053

#SPJ1

In a chemical reaction, usually, we have something very standard, whatever is on the left side of the arrow will be Reactant, and whatever comes after the arrow will be product, so for this reaction:

Na2CO3 (aq) + MgSO4 (aq) -> Na2SO4 (aq) + MgCO3 (s)

The reactants will be: Na2CO3 and MgSO4

The products will be: Na2SO4 and MgCO3

The aq or s representation means the physical state in which the compound will be found in water, if it is aq, this means that the compound will dissolve in water and it will be found in an aqueous state. If the letter is s, therefore the compound will be a solid in water, forming a precipitate.

Since we have a double change in the positions of the elements, this will be called a Double Displacement reaction, in which we have:

AB + CD -> AC + BD

Answer:

P₂ = 1.18 atm

Explanation:

To find the final pressure, you need to use the Combined Gas Law equation:

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

In this equation, "P₁", "V₁", and "T₁" represent the initial pressure, volume, and temperature. "P₂", "V₂", and "T₂" represent the final pressure, volume, and temperature. After plugging the given variables into the equation, you can simplify/rearrange the equation to solve for "P₂".

P₁ = 536 pKa                     P₂ = ? pKa

V₁ = 2.50 L                        V₂ = 3.75 L

T₁ = 75.0 °C                       T₂ = 25.0 °C

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]                                               <----- Combined Gas Law

[tex]\frac{(536 pKa)(2.50L)}{75.0^oC} =\frac{P_2(3.75 L)}{25.0^oC}[/tex]                          <----- Insert variables

[tex]17.87 =\frac{P_2(3.75 L)}{25.0^oC}[/tex]                                        <----- Simplify left side

[tex]446.7 = P_2(3.75 L)[/tex]                                      <----- Multiply both sides by 25.0

[tex]119 = P_2[/tex]                                                    <----- Divide both sides by 3.75

Finally, you need to convert the pressure from kilopascals (pKa) to atmospheres (atm).

101.3 pKa = 1 atm

 119 pKa                1 atm
---------------  x  --------------------  =  1.18 atm
                          101.3 pKa

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Combined Boyle's and Charles' gas law is used here. Therefore the new pressure of  gas is 1.18 atm.

Ideal gas equation is the mathematical expression that relates pressure volume and temperature.

Mathematically the relation between Pressure, volume and temperature can be given as

PV=nRT

where,

P = pressure of  gas

V= volume of gas

n =number of moles of gas

T =temperature of gas

R = Gas constant = 0.0821 L.atm/K.mol

Combining Boyle's and Charles' gas law

P₁V₁/T₁ = P₂V₂/T₂

{ (5.28atm) (2.50 L)} ÷348 K ={ (P2) (3.75 L)} ÷298 K

P2 =1.18 atm

Therefore the new pressure of gas is 1.18 atm when the temperature is changed to348K and volume is increased to 3.75 L.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ2

The pH change of a solution is practical evidence that a chemical change has occurred such that a solution is more acidic or basic.

The pH of a given solution can simply be defined as the degree of acidity or alkalinity of the solution indicating that the chemical composition of the substance has changed. The pH scale is from 0 to 14.

So therefore, when the pH of a substance changes from one point to another, it confirms that it is either more basic or acidic.

Read more on pH of solutions:

https://brainly.com/question/13557815

#SPJ1

nswer

C. Cr₂O₃ (s)

Explanation

An oxidizing agent is a substance that causes oxidation by accepting electrons; therefore, its oxidation state decreases.

A reducing agent is a substance that causes reduction by losing electrons; therefore its oxidation state increases.

The simplest way to answer this is that the oxidizing agent is the substance that is reduced, while the reducing agent is the substance that is oxidized.

Therefore, CrA

Gas particles have not definite volume, so they spread out and occupy much space as possible.

There's a great deal of empty space between particles, that have plenty of kinetic energy and are not particularly interested in each other. Gas particles circulate very fast and collide with one another, causing them to diffuse, or spread out until they're evenly distributed all through the quantity of the container.

A gas is depend that has neither a hard and fast extent nor a set form. rather, a gas takes each the quantity and the form of its container. It spreads out to take up all to be had area.

They don't have any precise volume. This means that gases always spread out in all instructions to fill the field into which they may be positioned. This spreading out of gases to fill all of the available space is referred to as diffusion. They may be compressed effortlessly.

Learn more about Gas particles here:- https://brainly.com/question/28787971

#SPJ1

Answer:

False

Explanation:

Atoms are neutral Ions carry a charge. Take a look at the groups in the periodic table for extra help in understanding this.

Answer:

675.99 g

Explanation:

1 mole of MgCl2 = 24.31 + 2(35.45) = 95.21 g

so mass of 7.10 moles = 7.10 x 95.21 = 675.991 g or 675.99 g

By converting 21 miles/hr to centimeter we get :

938.784 cm/s

            dmi /thr = vmph

Steps to convert miles per hour to cm :

To convert 21 miles/hr to cm/s:

21 mph =

= (21 × 44.704)

= 938.784cm/s

21mph is 938.784cm/s

To learn more about unit conversions refer to :

https://brainly.com/question/13016491

#SPJ13

Four types of observations that indicates occurring of a chemical change are -

When a chemical change occurs, color of the product is changed. Chemical change is an irreversible change. It cannot be undone as physical change.

A chemical change is an exothermic reaction. A large amount of heat is released when a chemical change occur. As the product formed in a chemical change is changed in its state, color, etc. which requires a large amount of heat.

Precipitate formation occurs in a chemical change as chemical change occurs in aqueous solution where two ionic bonds combine and forms insoluble salt called precipitate.

A chemical reaction releases off a gas. An example is reaction of baking soda and lemon juice. It releases carbon dioxide gas.

To learn more about chemical changes,

brainly.com/question/15606462

#SPJ1