Answer: Volume occupied by 3.00 moles of oxygen gas under the same condition is 3.75 L.
Explanation:
Given: [tex]n_{1}[/tex] = 4.00 moles, [tex]V_{1}[/tex] = 5.0 L
[tex]n_{2}[/tex] = 3.00 moles, [tex]V_{2}[/tex] = ?
Formula used is as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\\frac{5.0 L}{4.00 mol} = \frac{V_{2}}{3.00 mol}\\V_{2} = 3.75 L[/tex]
Thus, we can conclude that volume occupied by 3.00 moles of oxygen gas under the same condition is 3.75 L.
Phosphine, PH3, a reactive and poisonous compound, reacts with oxygen as follows: 4PH3(g) 8O2(g) - P4O10(s) 6H2O(g) If you need to make 6.5 moles of P4O10, how many moles of PH3 is required for the reaction
Answer: 26 moles of [tex]PH_3[/tex] are required for the reaction.
Explanation:
We are given:
Moles of [tex]P_4O_{10}[/tex] = 6.5 moles
The given chemical reaction follows:
[tex]4PH_3(g)+8O_2(g)\rightarrow P_4O_{10}(s)+6H_2O(g)[/tex]
By the stoichiometry of the reaction:
If 1 mole of [tex]P_4O_{10}[/tex] is produced by 4 moles of [tex]PH_3[/tex]
So, 6.5 moles of [tex]P_4O_{10}[/tex] will be produced by = [tex]\frac{4}{1}\times 6.5=26mol[/tex] of [tex]PH_3[/tex]
Hence, 26 moles of [tex]PH_3[/tex] are required for the reaction.
Two objects are brought into contact Object 1 has mass 0.76 kg, specific heat capacity 0.87) g'c and initial temperature 52.2 'C. Object #2 has mass 70.7 9. specific heat capacity 3.071" "c' and initial temperature 154 *C. What is the final temperature of the two masses after thermal equilibrium has been reached? Assume the two objects are thermally isolated from everything else. Express your answer in C
Answer:
[tex]T_F=77.4\°C[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible to set up the following energy equation for both objects 1 and 2:
[tex]Q_1=-Q_2[/tex]
In terms of mass, specific heat and temperature change is:
[tex]m_1C_1(T_F-T_1)=-m_2C_2(T_F-T_2)[/tex]
Now, solve for the final temperature, as follows:
[tex]T_F=\frac{m_1C_1T_1+m_2C_2T_2}{m_1C_1+m_2C_2}[/tex]
Then, plug in the masses, specific heat and temperatures to obtain:
[tex]T_F=\frac{760g*0.87\frac{J}{g\°C} *52.2\°C+70.7g*3.071\frac{J}{g\°C}*154\°C}{760g*0.87\frac{J}{g\°C} +70.7g*3.071\frac{J}{g\°C}} \\\\T_F=77.4\°C[/tex]
Yet, the values do not seem to have been given correctly in the problem, so it'll be convenient for you to recheck them.
Regards!
The dosage for an antibiotic is prescribed at 6.0 mg per kilogram of body weight, taken twice daily for two weeks. What total mass of antibiotic will be taken by a 160-lb person for the two-week period? (1 lb = 454 g)
Answer:
12,096 mg of antibiotics
Explanation:
cuz honeyyy:
160lb=72 kg
6mg twice a day so daily 12mg
12mg per kg so 12×72 =864
for 14 days is :864×14=12,096
What is the colour of red cabbage in vinegar?
Answer:
When red cabbage is treated with an acid or a base, it produces anthocyanin, a water-soluble pigment that changes color. In acidic situations with a pH less than 7, the pigment turns red, whereas in alkaline (basic) situations with a pH more than 7, the pigment turns bluish-green.
Explanation:
What’s the answers to the answers
what are the characteristics of primary standard substances?
Answer:
the characteristics of primary standard substances are:
1.High purity.
2.Stability (low reactivity)
3.Low hygroscopicity
4.High equivalent weight
5.Non-toxicity.
Ready and cheap availability.
The reaction of 9.50 g of carbon with Excess O2 Yield 12.8 of CO2. What is the percent yield of this reaction?
Answer:
Percentage yield = 36.75%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
C + O₂ —> CO₂
Next, we shall determine the mass of C that reacted and the mass of CO₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of C = 12 g/mol
Mass of C from the balanced equation = 1 × 12 = 13 g
Molar mass of CO₂ = 12 + (2×16)
= 12 + 32
= 44 g/mol
Mass of CO₂ from the balanced equation = 1 × 44 = 44 g
SUMMARY:
From the balanced equation above,
12 g of C reacted to produce 44 g of CO₂.
Next, we shall determine the theoretical yield of CO₂. This can be obtained as follow:
From the balanced equation above,
12 g of C reacted to produce 44 g of CO₂.
Therefore, 9.50 g of C will react to produce = (9.50 × 44) / 12 = 34.83 g of CO₂.
Thus, the theoretical yield of CO₂ is 34.83 g.
Finally, we shall determine the percentage yield of the reaction. This can be obtained as follow:
Actual yield of CO₂ = 12.8
Theoretical yield of CO₂ = 34.83 g
Percentage yield =?
Percentage yield = Actual yield / Theoretical yield × 100
Percentage yield = 12.8 / 34.83 × 100
Percentage yield = 1280 / 34.83
Percentage yield = 36.75%
why hydride ion is strong base than hydroxide ion?
Answer:
The hydride ion,H−is a stronger base, so it will abstract a proton from the water. As the water will give protons, so water will work as an acid and an acid-base reaction will take place. Hydride ions get protons from water and form hydrogen gas and hydroxide ions.
Sodium hydride is the chemical compound with the empirical formula NaH. This alkali metal hydride is primarily used as a strong yet combustible base in organic synthesis. NaH is a saline (salt-like) hydride, composed of Na+ and H− ions, in contrast to molecular hydrides such as borane, methane, ammonia, and water.
A mixture of 3 moles of N2, 5 moles of CO2, and 10moles of Cl2 exert a total pressure of 1120 mmHg. What is the partial pressure of CO2?
Answer:
A mixture of 3 moles of N2, 5 moles of CO2, and 10moles of Cl2 exert a total pressure of 1120 mmHg. What is the partial pressure of CO2?
Explanation:
According to Dalton's law of partial pressures:
The partial pressure of a gas can be determined by using the formula:
[tex]the partial pressure of a gas = mole fraction of the gas * total pressure[/tex]
Partial pressure of CO2:
[tex]partial pressure of CO2= total pressure * mole fraction of CO2\\\\Mole fraction of CO2=\frac{number of moles of CO2}{total number of moles of all the gases} \\mole fraction of CO2=\frac{5mol}{3mol+5mol+10mol} = 5/18\\Partial pressure of CO2=\frac{5}{18} * 1120mmHg\\ =311.1mmHg[/tex]
Hence, the partial pressure of CO2 is 311.1mmHg.
The rate equation for a reaction between substances C and D is:
rate = k[C]^2 [D]^2
The initial rate is found to be 7.5 x 10^-3mol dm^-3s^-1when the initial concentration of
C is of 0.25 mol dm^-3and the initial concentration of D is 0.50 mol dm^-3.
Calculate the value of the rate constant, k, at this temperature and deduce its units.
*Important Asap please *
Answer:
[tex]rate = k[C] {}^{2} [D] {}^{2} \\ 7.5 \times {10}^{ - 3} = k {(0.25)}^{2} {(0.50)}^{2} \\ k = \frac{7.5 \times {10}^{ - 3} }{ {(0.25)}^{2} {(0.50)}^{2} } \\ k = 0.48 \: {mol}^{ - 3} {dm}^{9} {s}^{ - 1} [/tex]
Why is specific activity used as a measurement of enzyme purity, but the turnover number cannot be used for this purpose?
Answer:
See explanation
Explanation:
Specific activity of an enzyme is defined as a measure of the rate of reaction between enzyme and substrate.
In the study of enzyme kinetics, specific activity is particularly regarded to be the amount of substrate converted by the enzyme per milligram of protein per unit of time. It is thus a reliable measure of enzyme activity per milligram of total protein.
On the other hand, the turnover number is defined as a measure of the number of conversions achieved by a substrate molecule in one second at a particular active site depending on the specific enzyme concentration.
Since specific activityof the enzyme is the ratio of the enzyme activity to enzyme concentration, then specific activity can be used as a measurement of enzyme purity.
Write a summary of the science of muscle growth?
Answer:Muscle growth or “skeletal muscle hypertrophy,” as it's called at science parties) is the result of a complex process that adds more myosin “filaments” to each muscle fiber. This makes the “engine” of the cell bigger and stronger over time. ... This process is called muscle protein synthesis, or MPS. Skeletal muscle is composed of thread-like myofibrils and sarcomeres that form a muscle fiber and are the basic units of contraction. The 650 skeletal muscles in the human body contract when they receive signals from motor neurons, which are triggered from a part of the cell called the sarcoplasmic reticulum.
38. Consider the following equilibrium:
2CO(g) + O2(g) =2CO2
Keg=4.0 x 10-10
What is the value of Key for 2CO2(g) + 2COR + O2g) ?
Answer:
[tex]Key=2.5x10^{-9}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the equilibrium constant value for the reverse reaction:
[tex]2CO_2(g) \rightleftharpoons 2CO(g) + O_2(g)[/tex]
By knowing that the equilibrium expression is actually:
[tex]Key =\frac{[CO]^2[O_2]}{[CO_2]^2} =\frac{1}{Keg}[/tex]
Thus, we plug in and solve for the inverse of Keq to obtain Key as follows:
[tex]Key =\frac{1}{4.0x10^{-10}}\\\\Key=2.5x10^{-9}[/tex]
Regards!
HELLLLLLLLPPPPPPPPPPPPPPPPPP
Answer:
aa
Explanation:
There is a lowercase a on both sides.
Calculate the number of moles of gas in a basketball inflated to a total pressure of 1.65 atm with a volume of 3.2 L at 250C. ( K = oC + 273)
Answer:
0.123 mol
Explanation:
Step 1: Convert 250 °C to Kelvin
We will use the following expression.
K = °C + 273
K = 250 + 273 = 523 K
Step 2: Calculate the number of moles of gas (n)
A gas occupies a container with volume (V) 3.2 L at a temperature (T) of 523 K and pressure (P) of 1.65 atm. We can calculate the number of moles of the gas using the ideal gas equation.
P × V = n × R × T
n = P × V / R × T
n = 1.65 atm × 3.2 L / (0.0821 atm.L/mol.K) × 523 K = 0.123 mol
Kristy finds the mass of an object to be 20 grams and the volume to be 10 mL. What is the density of the object? (don't send me links, just give a straight answer)
How much energy is used when 14.3 moles of hydrosulfuric acid reacts with 17.1 moles
of oxygen?
2 H2S + 3 02 + 175 KJ
—->2 SO2 + 2 H20
Which substance is the limiting reactant?
Answer:
O2 is the limiting reactant.
Explanation:
Hello there!
In this case, according to the given information about this reaction, one could identify the limiting reactant by performing a mole ratio of H2S to SO2 and O2 to SO2:
[tex]14.3molH_2S*\frac{2molSO_2}{2molH_2S}=14.3molSO_2 \\\\17.1molO_2*\frac{2molSO_2}{3molO_2}=11.4molSO_2[/tex]
Thus, since 17.1 moles of O2 yields fewer moles than 14.3 moles of H2S, we infer the former is the limiting reactant.
Regards!
Will mark Brainlest ( molecular weight of ammonium sulphate)
step by step
Answer:
132 amu
Explanation:
ammonium sulphate is [tex](NH_4)_{2} SO_4[/tex]
to calculate molecular weight we need
atomic weight of the element of the compound
here ammonium sulphate is formed by two elements
2 nitrogen , 8 hydrogen , 1 sulphur amd 4 oxygen
atonomic number of nirogen is 14 , hydrogen is 1 , sulphur has 32 and oxygen has 16
so lets calculate molecular weight of ammonium sulphate
2*14 + 8*1 + 1*32 + 4*16
28 + 8 + 32 + 64
132 amu
Gaseous ethane (CH,CH,) will react with gaseous oxygen (02) to produce gaseous carbon dioxide (CO2) and gaseous water (H,0). Suppose 4.21 g of
ethane is mixed with 31. 9 of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Be sure your answer has
the correct number of significant digits.
Answer: The mass of [tex]CO_2[/tex] produced is 12.32 g
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For ethane:Given mass of ethane = 4.21 g
Molar mass of ethane = 30 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of ethane}=\frac{4.21g}{30g/mol}=0.140mol[/tex]
For oxygen gas:Given mass of oxygen gas = 31.9 g
Molar mass of oxygen gas= 32 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of oxygen gas}=\frac{31.9g}{32g/mol}=0.997mol[/tex]
The chemical equation for the combustion of ethane follows:
[tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
By stoichiometry of the reaction:
If 2 moles of ethane reacts with 7 moles of oxygen gas
So, 0.140 moles of ethane will react with = [tex]\frac{7}{2}\times 0.140=0.49mol[/tex] of oxygen gas
As the given amount of oxygen gas is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.
Thus, ethane is considered a limiting reagent because it limits the formation of the product.
By the stoichiometry of the reaction:
If 2 moles of ethane produces 4 moles of [tex]CO_2[/tex]
So, 0.140 moles of ethane will produce = [tex]\frac{4}{2}\times 0.140=0.28mol[/tex] of [tex]CO_2[/tex]
We know, molar mass of [tex]CO_2[/tex] = 44 g/mol
Putting values in above equation, we get:
[tex]\text{Mass of }CO_2=(0.28mol\times 44g/mol)=12.32g[/tex]
Hence, the mass of [tex]CO_2[/tex] produced is 12.32 g
how many hydrogen atoms are in one mole of caffeine
[tex] \huge \mathbb{ HI !!}[/tex]
My Answer 10My ExplanationAlthough caffeine (a stimulant found in coffee and tea) is a relatively complicated molecule, it's only eight atoms of carbon, ten of hydrogen, four of nitrogen and two of oxygen – C8H10N4O2. This kind of representation is called a molecular formula – it tells us what kind of atoms we have, and how many of each.
#CarryOnLearningThere are 10 hydrogen atoms in one mole of caffeine.
What is caffeine?Caffeine belongs to the methylxanthine category of nervous system stimulants. It's just a cognitive booster that improves alertness but also attentional performance.
Caffeine's chemical formula would be C8H10N4O2, that indicates it contains eight carbon atoms, ten hydrogen atoms, four nitrogen atoms, and two oxygen atoms.
So it can be seen that , 10 hydrogen resent in caffeine molecule.
To know more about caffeine
https://brainly.com/question/9255669
#SPJ2
What is the meaning of beaker?
Answer:
a lipped cylindrical glass container for laboratory use
Explanation:
HELPP
There are 9.23 x 1023 molecules of water in a beaker, how many moles are there?
Answer:
Answer: There are 1.53 moles present in molecules of water in a beaker.
Explanation:
According to the mole concept, there are molecules present in 1 mole of a substance.
So, number of moles present in molecules are calculated as follows.
Thus, we can conclude that there are 1.53 moles present in molecules of water in a beaker.
Explanation:
Calculate the number of moles of magnesium, chlorine, and oxygen atoms in 3.50 moles of magnesium
perchlorate. Mg(C104)2.
Express the number of moles of Mg, Cl, and O atoms numerically, separated by commas.
Answer:
[tex]n_{Mg}=3.50molMg\\\\ n_{Cl}=7.00molCl\\\\n_O=28.0molO[/tex]
Explanation:
Hello there!
In this case, according to the given information it turns out possible for us to realize that one mole of the given compound, Mg(ClO₄)₂, has one mole of Mg, two moles of Cl and eight moles of O; thus, we proceed as follows:
[tex]n_{Mg}=3.50molMg(ClO_4)_2*\frac{1molMg}{1molMg(ClO_4)_2}=3.50molMg\\\\ n_{Cl}=3.50molMg(ClO_4)_2*\frac{2molCl}{1molMg(ClO_4)_2}=7.00molCl\\\\n_O=3.50molMg(ClO_4)_2*\frac{8molO}{1molMg(ClO_4)_2}=28.0molO[/tex]
Best regards!
How much work (in J) is involved in a chemical reaction if the volume decreases from 4.35 to 1.20 L against a constant pressure of 0.822 atm?
Express your answer to three significant figures and include the appropriate units.
Answer:
W = -262 J.
Explanation:
Hello there!
In this case, according to the given information, we can recall the definition of work in terms of constant pressure and variable volume as follows:
[tex]W=P(V_2-V_1)[/tex]
So we plug in the given pressure and volumes to obtain:
[tex]W=0.822atm(1.20L-4.35L)\\\\W=-2.60atm*L[/tex]
Now, we convert this number to J (Pa*m³) by using the shown below conversion factor:
[tex]W=-2.60atm*L*\frac{101325Pa}{1atm} *\frac{1m^3}{1000L}\\\\W=-262J[/tex]
Regards!
Which of the following explains the high boiling
point of water?
a Surface tension
b Polarity
C Capillary action
d Hydrogen bonding
Answer:
The correct answer is - d. hydrogen bonding.
Explanation:
Water has strong hydrogen bonds between its molecules that require a very high amount of energy in order to break. Water molecules are joined together or bound with a strong intermolecular force called hydrogen bonds.
These bonds require more kinetic energy which means more temperature or heat in order to break the bonds and turn into steam and this is the reason it has a high boiling point.
A pressure cooker contains 5.68 L of air at a temperature of 390 4K if the absolute pressure of the air in the pressure cooker is 205 Pa how many moles of air are in the cooker
Answer:
3.59x10⁻⁴ mol
Explanation:
Assuming ideal behaviour we can solve this problem by using the PV=nRT formula, where:
P = 205 PaV = 5.68 Ln = ?R = 8314.46 Pa·L·mol⁻¹·K⁻¹T = 390.4 KWe input the data given by the problem:
205 Pa * 5.68 L = n * 8314.46 Pa·L·mol⁻¹·K⁻¹ * 390.4 KAnd solve for n:
n = 3.59x10⁻⁴ molDuring the synthesis of 2,4-dinitrophenylhydrazone derivative, you were instructed to triturate the crude product with 10 mL of 2 M hydrochloric acid. What is the purpose of this trituration
Answer:
to remove any remaining 2,4-dinitrophenylhydrazone
Explanation:
Usually, when an organic compound is synthesised, traces of impurities such as excess reagents or solvent remain in the product.
It is therefore imperative that these contaminants are removed so that the product can attain a very high degree of purity.
Hence, during the synthesis of 2,4-dinitrophenylhydrazone derivative, 10 mL of 2 M hydrochloric acid is titrated against the crude product so that any remaining 2,4-dinitrophenylhydrazone is removed.
what does the atmoic weight 1 in hydrogen tell scientists
A. pounds hydrogen weighs.
B. protons hydrogen has in its nucleus.
C. other elements hydrogen interacts with.
D. neutrons hydrogen releases in the atmosphere.
Explanation:
The atomic number is equal to the number of protons in an atom's nucleus. Hydrogen's atomic number is 1 because all hydrogen atoms contain exactly one proton.
Write an equation for the proton transfer reaction that occurs when the following acid reacts with water. Draw curved arrows that show a mechanism for the proton transfer, and modify the given structures to draw the resulting products.
Answer: hello your question has some missing data attached below is the complete question.
answer:
attached below
Explanation:
Attached below is the mechanism for proton transfer
a) HBr
H₃O + Br⁻
b) attached below
c) attached below
You have 4 litres of a 3.0 mol/L solution of NaCl in a
chemical store room.
How many moles of NaCl are present? *
0.75 mol
1.33 mol
12 mol
M = 3.0 mol/L
V = 4 L
Required:n
Solution:M = n / V
n = MV
n = (3.0 mol/L)(4 L)
n = 12 mol
Therefore, the number of moles of NaCl present is 12 mol.
#ILoveChemistry
#ILoveYouShaina
Answer 12 mol
Explanation: [tex]C_{M} = \frac{n}{V} ==> n = C_{M} *V=4*3=12 mol[/tex]