Answer:
123 g
Explanation:
First, we convert 10.0 dL into mL, keeping in mind that:
1 dL = 100 mL; then10.0 dL * 100 = 1000 mLNow we can multiply the density by the volume in order to calculate the mass:
Density = mass / volumeDensity * volume = mass0.123 g/mL * 1000 mL = 123 g10.0 dL of a substance with a density of 0.123 g/mL would weigh 123 grams.
what would be the observation when you dipp magnesium hydroxide in a blue litmus paper and a red litmus paper. also what would be the conclusion for it
Answer:
red litmus will turn blue
blue litmus will remain blue
Explanation:
magnesium hydroxide is a base therefore turns red litmus paper blue
What is the mass (in grams) of 2.55 x 1022 molecules of water?
Explanation:
hope the picture above make sense:)
Give the name of the products
formed
between Benzene and the following Compounds
Br2,Cl2,HNO3,H2SO4,HCOCl
1-chlore-2,2-dimethylpropane
Answer:
With Br2 - Bromobenzene
With Cl2 - Chlorobenzene
With HNO3- Nitrobenzene
With H2SO4 - Benzenesulphonic acid
With HCOCl - Benzoyl chloride
With 1-chloro-2,2-dimethylpropane - 2,2dimethyl-1-phenyl propane
Explanation:
All the reactions listed above are electrophillic reactions. They are electrophillic reactions because the attacking agents in each reagent is an electrophile. An electrophile means any specie that is electron deficient and attacks regions of high electron density in molecules.
The benzene molecule has rich electron density. Substituents that are electron pushing increases the tendency of benzene to undergo electrophillic substitution reactions while electron withdrawing substituents decrease the the tendency of benzene to undergo electrophillic substitution reactions.
The names of the compounds formed when benzene undergoes electrophillic reaction with different attacking agents have been listed in the answer section.
What is the wavelength of a photon with an energy of 3.26 x 10-19 J?
A. 527 nm
B. 610 nm
C. 492 nm
D. 671 nm
Answer:
610 nm
Explanation:
Apx
What is the wavelength of a 3 x 1012 Hz infrared wave?
A. 3 x 10-3 m
B. 1x 104 m
C. 3 x 1020 m
D. 1 x 10-4 m
SUBMIT
Answer:
D
Explanation:
wavelength = speed of light/ frequency
= (3 x 10^8 m/s) / (3 x 10^12 Hz)
= 1 x 10^-4 m
what is the difference between transmutation and natural radioactivity
Biologists classify all living things into __ kingdoms.
A.five
B.three
C.six
D.seven
Answer:
B. three
Explanation:
sana nakatulong :,-)
What is the most likely meaning of concentration in paragraph 7?thinking thinking about about one one thing thing in in a a focused focused waywayamount amount of of a a substance substance found found in in waterwaterarea area where where something something comes comes fromfromchance chance to to be be foundfound
Answer:
amount of a substance found in water.
Answer:
amount of a substance found in water.
Explanation:
Final volume of a .50 M H3PO4 solution prepared from 50 mL of a 6 M H3PO4 solution
Answer:
600 mL
Explanation:
From the question given above, the following data were obtained:
Initial concentration (C₁) = 6 M
Initial volume (V₁) = 50 mL
Final concentration (C₂) = 0.5 M
Final volume (V₂) =?
Using the dilution formula (i.e C₁V₁ = C₂V₂) we can obtain the final volume as illustrated below:
C₁V₁ = C₂V₂
6 × 50 = 0.5 × V₂
300 = 0.5 × V₂
Divide both side by 0.5
V₂ = 300 / 0.5
V₂ = 600 mL
Thus, the final volume is 600 mL
Using the following balanced formula, determine the number of molecules
of CH4 needed to produce 12 molecules of CCl4.
CH4 + 4C12 --> CC14 + 4HCI
Answer:
12 molecules CH₄
Explanation:
Step 1: Write the balanced equation
CH₄ + 4 Cl₂ ⇒ CCl₄ + 4 HCI
Step 2: Establish the appropriate molecular ratio
According to the balanced equation, the molecular ratio of CH₄ to CCl₄ is 1:1.
Step 3: Determine the number of molecules of CH₄ needed to produce 12 molecules of CCl₄
We will use the previously established molecular ratio.
12 molecules CCl₄ × 1 molecule CH₄/1 molecule CCl₄ = 12 molecules CH₄
करताह!
गर्मियों में घड़े का जल ठंडा क्यों होता है?
Answer:
I don't understand the question
Explanation:
what is your name
6. If 4 mole of the rocket fuel ammonium perchlorate, NH4C/04 (s) is
allowed to react with excess Al so all of the NH4ClO4 is consumed, how
many grams of water will be produced?
3NH_CI04 (s) + 3Al (s) Al2O3 (s) + AlCl3 (s) + 3NO (g) + 6H2O (g)
Answer:
144g of H₂O
Explanation:
3NH₄ClO₄(s) + 3Al → Al₂O₃(s) + AlCl₃(s) + 3NO(g) + 6H₂O(g)
From the equation:
3 moles of NH₄ClO₄ produced 6 moles of H₂O
4 moles of NH₄ClO₄ produced ? moles of H₂O
(4 ₓ 6)/3 = [tex]\frac{24}{3}[/tex] = 8 moles of H₂O
1 mole of H₂O = (1 × 2) + 16 = 18g (The Relative Molecular mass of H₂O)
8 moles of H₂O = ?
Therefore 8 × 18 = 144g
=144g of H₂O
T/F Adsorption is a real problem in gravimetry, especially when the particle size is large
Answer:
False
Explanation:
Generally the ionization potential in a period increases, but there are some exceptions. The one which is not an exception is
1) Be & B 2) N & O 3) Mg & Al 4) Na & Mg
Answer:
Generally, the first ionisation energy increases along a period. But there are some exceptions one which is not an exception
For the reaction 2 H2(g) + O2(g) → 2 H2O(g), how many liters of water can be made from 5.0 L of
oxygen gas and an excess of hydrogen?
Answer: 5L O2 x 1 mol O2/ 22.4L O2 x 2 mol H20/ 1 mol O2 x 22.4L H20/ 1 mol H20 = 10 L H2O
Explanation:
For future reference though, since its at STP that means that the coefficient are in proportion. Since oxygen has a coefficient of 1 and water has a coefficient of 2 for every 1 liter of oxygen there is 2 liters of water. Hence you started with 5 liters and ended with 10
During the workup portion of the reaction of alkenes with HBr as described in the experiment provided, a student transferred the reaction mixture to a separatory funnel, rinsed the reaction flask with diethyl ether, and added the ether rinses to the separatory funnel. The student then added sodium bicarbonate to the separatory funnel. Extremely vigorous bubbling occurred. What did the student do wrong
Answer:
Explanation:
Because of the acid-base reaction, as sodium bicarbonate is introduced to the separatory funnel, the additional or unreacted HBr reacts vigorously to yield CO2 gas, which exits the separatory funnel together with any dissolved compound(s) in the ether layer. This is due to a wrong and incorrect selection of the solvent mixture and the addition of sodium bicarbonate to an acidic solution.
Nothing to do with it until it has leaked out of the separatory funnel. Even then, the student may separate the components from the remaining reaction mixture by washing the ether coating layer several times with brine water, then running it into a dry sodium sulfate bed and evaporating solvent ether under decreased pressure.
Help me!!!
Pleaseeee!!!!
Answer:
0.862 J/gºC
Explanation:
The following data were obtained from the question:
Mass of metal (Mₘ) = 50 g
Initial temperature of metal (Tₘ) = 100 °C
Mass of water (Mᵥᵥ) = 400 g
Initial temperature of water (Tᵥᵥ) = 20 °C
Equilibrium temperature (Tₑ) = 22 °C
Specific heat capacity of water (Cᵥᵥ) = 4.2 J/gºC
Specific heat capacity of metal (Cₘ) =?
The specific heat capacity of the metal can be obtained as follow:
Heat lost by metal = MₘCₘ(Tₘ – Tₑ)
= 50 × Cₘ × (100 – 22)
= 50 × Cₘ × 78
= 3900 × Cₘ
Heat gained by water = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)
= 400 × 4.2 × (22 – 20)
= 400 × 4.2 × 2
= 3360 J
Heat lost by metal = Heat gained by water
3900 × Cₘ = 3360
Divide both side by 3900
Cₘ = 3360 / 3900
Cₘ = 0.862 J/gºC
Therefore, the specific heat capacity of the metal is 0.862 J/gºC
Describe the structure of ammonium laurel sulfates refer to the given diagram. Your answer should include the type of bonding, the elements contained, and the size and shape of the molecule. Write a short paragraph
Answer:
This ammonium laurel sulfates anion consists of a nonpolar hydrocarbon chain and a polar sulfate end group. It means it has a hydrophilic head and hydrophobic tail. There are ammonium ions, sulfate, and fatty acids present.
Lauryl sulfate has lauric acid attach to sulfate ions with carbon-sulfur bond, the fatty acid formed by the covalent bonds between C-C attached to hydrogens. Sulfur also bound to oxygen by covalent bonds. Nitrogen is surrounded by the four hydrogen atoms in the hydrophilic head.
Lauryl sulfate has lauric acid attach to sulfate ions with carbon-sulfur bond, the fatty acid formed by the covalent bonds between C-C attached to hydrogens.
What is a bond?A chemical bond is what holds atoms together in molecules.
Ammonium Laureth Sulfate is an ammonium salt of ethoxylated lauryl sulfate, a surfactant that contains PEG (polyethylene glycol) in its structure.
Ammonium laurel sulfates anion consists of a nonpolar hydrocarbon chain and a polar sulfate end group.
It means it has a hydrophilic head and hydrophobic tail. There are ammonium ions, sulfate, and fatty acids present.
Lauryl sulfate has lauric acid attach to sulfate ions with carbon-sulfur bond, the fatty acid formed by the covalent bonds between C-C attached to hydrogens.
Sulfur also bound to oxygen by covalent bonds. Nitrogen is surrounded by the four hydrogen atoms in the hydrophilic head.
Learn more about the bond here:
https://brainly.com/question/10777799
#SPJ5
Calculate the volume, in milliliters, for the following:
.850 mol of NaNO3, from a .500 M NaNO3 solution
30.0 g of LiOH from a 2.70 M LiOH solution
Answer: The volume for 0.850 mol of [tex]NaNO_{3}[/tex] from a [tex]NaNO_{3}[/tex] solution is 1700 mL.
The volume of 30.0 g of LiOH from a 2.70 M LiOH solution is 464 mL.
Explanation:
Molarity is the number of moles of solute present in a liter of solution.
As given moles of [tex]NaNO_{3}[/tex] are 0.850 mol and molarity of [tex]NaNO_{3}[/tex] solution is 0.5 M. Hence, its volume is calculated as follows.[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\0.5 M = \frac{0.850 mol}{Volume}\\Volume = 1.7 L (1 L = 1000 mL)\\= 1700 mL[/tex]
Therefore, the volume for 0.850 mol of [tex]NaNO_{3}[/tex] from a [tex]NaNO_{3}[/tex] solution is 1700 mL.
As given mass of LiOH are 30.0 g from a 2.70 M LiOH (molar mass = 23.95 g/mol) solution. Hence, its number of moles are calculated as follows.[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{30.0 g}{23.95 g/mol}\\= 1.25 mol[/tex]
So, volume for LiOH solution is calculated as follows.
[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\2.70 M = \frac{1.25}{Volume}\\Volume = 0.464 L (1 L = 1000 mL)\\= 464 mL[/tex]
Therefore, volume of 30.0 g of LiOH from a 2.70 M LiOH solution is 464 mL.
Viscosity is a measure of:
A. how much resistance to flowing a fluid has.
B. how much space a fluid takes up.
C. how much matter a fluid is made of.
D. how much fluid is in a given volume.
Viscosity is the measure of how much resistance to flowing any given fluid has; answer choice A. The formula to calculate the viscosity of a liquid is...
F = μA(u/y)
How do conduction, convection, and radiation redistribute incoming solar energy?
The solar energy from sun is radiating to the earth's surface and making the atmosphere warmer. The heat energy is redistributing back by through different heat transfer modes.
What is heat transfer?Heat energy transfer from hotter region to colder region by the temperature gradient. The heat is transferring through solids by conduction. Conduction is the process of heat transfer through the closely packed particles in solids.
Heat transfers through convection in liquids. Where the hot molecules rise to the surface and transfers the heat to other molecules. The heat radiated to the earth make the sources in earth warmer. Through convection, the water molecules heat up.
The water vapor formed by convection process radiates to the atmosphere and redistributes the energy back.
To find more on radiation, refer here:
https://brainly.com/question/13934832
#SPJ2
Which is the function of the organ shown below
Answer:
c the pancreas produce enzyme that breakdown carbohydrate protein and fat
If one of these stars happens to be blue, which star is most likely to be that color?
Answer:
(D) 15,000
Explanation:
I took the test trust me.
Answer:
D
Blue stars are the hottest ones, so the hottest of these stars should be a blue one.
Hope that helps! :)
-Aphrodite
Explanation:
A 35 Liter tank of Oxygen is at 315 K with an internal pressure of 190 atmospheres. How many moles of gas does the tank contain?
How many liters of SO2 will be produced from 26.9L O2?
Answer:
26.9 L SO₂
Explanation:
Step 1: Write the balanced equation
S(s) + O₂(g) = SO₂(g)
Step 2: Establish the appropriate volume ratio
For gases at the same conditions, the volume ratio is equal to the molar ratio. The volume ratio of O₂(g) to SO₂(g) is 1:1.
Step 3: Calculate the liters of SO₂ produced from 26.9 L of O₂
We will use the previously established volume ratio.
26.9 L O₂ × 1 L SO₂/1 L O₂ = 26.9 L SO₂
Which statement about nuclear fission and nuclear fusion is not correct?
A. Both processes change atoms of one element to another element.
B. Both processes can release huge amounts of energy.
C. Both processes conserve mass.
D. Both processes produce dangerous radiation.
The statement, that describes about nuclear fission and nuclear fusion is "both processes can release huge amounts of energy."
What is nuclear fission and fusion?Nuclear fission is the process by which an atom's nucleus breaks into two or more smaller nuclei. Nuclear fusion is the process by which two light atomic nuclei merge to produce a single heavier one, releasing huge quantities of energy in the process.
Fusion and fission are both nuclear reactions that yield significant amounts of energy that can be used to generate power. However, fission is the splitting of atoms, whereas fusion is the joining of them.
To put in another way, while both nuclear reactions that generate energy, the methods are vastly different. They both produce a lot of energy.
Hence the correct answer is B.
Learn more about nuclear fission and nuclear fusion here
https://brainly.in/question/47666389
#SPJ2
Answer:it’s not B
Explanation:
substance x is a gas at room tempreture
Answer:
whats the question?
Explanation:
Does "non-thermodynamically favored" just mean thermodynamically unfavorable?
Howyiong did Newton live?
Answer:4 January 1643 [O.S. 25 December 1642] Woolsthorpe-by-Colsterworth, Lincolnshire, England
Died 31 March 1727 (aged 84) [O.S. 20 March 1726] Kensington, Middlesex, Great Britain
Explanation:
how do you solve the expending form for 3(2+5)
Answer:
it's expanding from is 15
Answer:
Explanation:
3( 2+5 )
3. ( 7 )
3 . 7= 21
have a good day!