If someone can help that would be cool

If Someone Can Help That Would Be Cool

Answers

Answer 1

Answer:

  1.5 cm

Explanation:

The ratio of areas is the square of the ratio of diameters, so cylinder A has (1/2)^2 = 1/4 the area of cylinder B.

The volume of the cylinder is jointly proportional to its area and its height. So, for a fixed volume, the height is inversely proportional to the area.

Cylinder B has 4 times the area of cylinder A, so any volume moved from cylinder A to B will require only 1/4 of the change in height that is required in cylinder A.

The red piston in cylinder B rises 1.5 cm.


Related Questions

A go cart with a mass of 60 kg is moving at a rate of 10 m/s. How much Kinetic Energy does the go cart have?

Answers

Answer:

3000 J

Explanation:

The kinetic energy of an object can be found by using the formula

[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]

m is the mass in kg

v is the velocity in m/s

From the question

m = 60 kg

v = 10 m/s

We have

[tex]k = \frac{1}{2} \times 60 \times {10}^{2} \\ = 30 \times 100 \\ = 3000[/tex]

We have the final answer as

3000 J

Hope this helps you

Answer:

[tex]\boxed {\boxed {\sf 3000 \ J}}[/tex]

Explanation:

Kinetic energy is the energy an object has due to motion. It is calculated using the following formula:

[tex]KE=\frac{1}{2} mv^2[/tex]

The mass of the go-cart is 60 kilograms and the velocity is 10 meters per second.

m= 60 kg v= 10 m/s

Substitute the values into the formula.

[tex]KE= \frac{1}{2} (60 \ kg)(10 \ m/s)^2[/tex]

Solve the exponent.

(10 m/s)² = 10 m/s * 10 m/s = 100 m²/s²

[tex]KE = \frac{ 1}{2} (60 \ kg)(100 \ m^2/s^2)[/tex]

Multiply the numbers together.

[tex]KE= 30 \ kg * 100 \ m^2/s^2[/tex]

[tex]KE= 3000 \ kg*m^2/s^2[/tex]

Convert the units. 1 kilogram meter squared per second squared is equal to 1 Joule, so our answer of 3000 kg*m²/s² equals 3000 Joules.

[tex]KE= 3000 \ J[/tex]

The go-cart has 3000 Joules of kinetic energy.

What is the distance traveled by the elevator between 8 s and 24 s?
m

Answers

Answer: The displacement of the elevator between 8 s and 24 s is 6 m. Explanation: Given that,. Initial time = 8 s. Final time = 24 s.

The distance is equal to 6 m traveled by elevator between 8 s and 24 s.

What are distance and displacement?

The distance is described as the total length covered by an object. Distance is a scalar parameter with no direction. The distance covered by an object is always +ve, it can never be zero.

The displacement is described as the shortest length between two points by the object. The displacement is a vector parameter with direction & magnitude. The displacement can be +ve, -ve, or zero and can increase or decrease over time.

Given the position of the elevator at time t = 8 s at d = 9 m

The position of the elevator at time t = 24 s at d = 15 m

The distance covered by the elevator = 15 - (9) =  15 - 9 = 6 m

Therefore, the distance traveled by an elevator between 8 s and 24 s is equal to 6 m.

Learn more about distance and displacement, here:

brainly.com/question/3243551

#SPJ2

10. What do you think the effect is of jet airplanes on global warming?

Answers

Answer:

Like other emissions resulting from fossil fuel combustion, aircraft engines produce gases, noise, and particulates, raising environmental concerns over their global effects and their effects on local air quality.[2]Jet airliners contribute to climate change by emitting carbon dioxide (CO2), the best understood greenhouse gas, and, with less scientific understanding, nitrogen oxides, contrails and particulates. Their radiative forcing is estimated at 1.3–1.4 that of CO2 alone, excluding induced cirrus cloud with a very low level of scientific understanding. In 2018, global commercial operations generated 2.4% of all CO2 emissions.

Between 1940 and 2018, aviation CO2 emissions grew from 0.7% to 2.65% of all CO2 emissions.[1]

Jet airliners have become 70% more fuel efficient between 1967 and 2007, and CO2 emissions per Revenue Ton-kilometer (RTK) in 2018 were 47% of those in 1990. In 2018, CO2 emissions averaged 88 grams of CO2 per revenue passenger per km. While the aviation industry is more fuel efficient, overall emissions have risen as the volume of air travel has increased. By 2020, aviation emissions were 70% higher than in 2005 and they could grow by 300% by 2050.

Aircraft noise pollution disrupts sleep, children's education and could increase cardiovascular risk. Airports can generate water pollution due to their extensive handling of jet fuel and deicing chemicals if not contained, contaminating nearby water bodies. Aviation activities emit ozone and ultrafine particles, both of which are health hazards. Piston engines used in general aviation burn Avgas, releasing toxic lead.

Aviation's environmental footprint can be reduced by better fuel economy in aircraft or Air Traffic Control and flight routes can be optimised to lower non-CO2 effects on climate from NO

x, particulates or contrails. Aviation biofuel, emissions trading and carbon offsetting, part of the ICAO's CORSIA, can lower CO2 emissions. Aviation usage can be lowered by short-haul flight bans, train connections, personal choices and aviation taxation and subsidies. Fuel-powered aircraft may be replaced by hybrid electric aircraft and electric aircraft or by hydrogen-powered aircraft.

Is mechanical energy the result of both kinetic and potential energy?

Answers

Answer:

Yes

Explanation:

Because putting them together would make a type of energy making the answer yes

The answer is: Yes, mechanical energy can be both kinetic and potential energy.

Explanation:

The mechanical energy of an object can be the result of its motion (i.e., kinetic energy) and/or the result of its stored energy of position (i.e., potential energy).

The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy. This sum is simply referred to as the total mechanical energy.

A log has a density of. 8 g/cmÂł. What will happen to this log in freshwater, which has a density of 1. 0 g/cmÂł? It will sink. It will float. It will move deeper. It will decrease in density.

Answers

When a log of wood is put over the freshwater, the log start to float. Option B is correct.

Density:

It can be defined as the amount of substance per unit volume. It is usually denoted by D. It is measured in the [tex]\bold { kg/m^3}[/tex].

The less dense object always floats over the more dense substance.

For example- Here, The density of the log is 0.8 [tex]\bold{ cm^3}[/tex] and the density of the of water is 1.0 [tex]\bold{ cm^3}[/tex] .

Since, the density of the log is lesser than the density of the water.

Therefore, when a log of wood is put over the freshwater, the log start to float.

To know more about  Density:

https://brainly.com/question/952755


4. Marcia consumes 8.4 X 10.J (2000 food calories) of energy per day while maintaining a constant weight.
What is the average power she produces in a day? 97 Watts

Answers

Answer:

8.40 is your answer.

Explanation:

The average power  she produces in a day be   97.22 Watts.

What is power?

The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.

Marcia consumes total amount of energy per day = 2000 calories = 8.4 × 10⁶ joule.

1 day = 24 × 60 × 60 second = 86400 second

So, average power  she produces in a day = energy/time

=  8.4 × 10⁶ joule/86400 second

= 97.22 Watts

Learn more about power here:

https://brainly.com/question/29575208

#SPJ2

A wave has a wavelength of 1.5 m and a frequency of 6.0 Hz. What is the
speed of the wave?

Answers

Answer:

9 m/s

Explanation:

The speed of the wave given only it's frequency and wavelength can be found by using the formula

[tex]c = f \times \lambda[/tex]

where

c is the velocity of the wave in m/s

[tex] \lambda[/tex] is the wavelength in m

f is the frequency in Hz

From the question we have

c = 6 × 1.5 = 9

We have the final answer as

9 m/s

Hope this helps you

astronauts appear weightless while working in the international space station because

Answers

cause there's no gravity therefore they appear weightless

i. a A ball is released from a height of 45 m top of the building. If it strikes the ground surface after 5 seconds, calculate the acceleration and final velocity of the ball. [18 m/s, 3.6 m/s²].​

Answers

Answer:

3.6m/s², 18m/s

Explanation:

So according to h=1/2at², 45=1/2a*25, a=3.6m/s² (which means that it didn't happen on Earth?)

Final velocity = at = 3.6*5 = 18 m/s

Mass can be measured with a triple
beam balance in units of
Resources
A. grams
B. Newtons
C. cubic centimeters
D. millimeters

Answers

Answer:

It can be measure by grams

HELP ASAP WHOEVER ANSWERS FIRST WITH BE BRAINIEST PLEASE HELP!

Answers

The answer is : A₃ = A₁ - A₂ = 3.0 - 2.0 =  1.0A

Ok done. Thank to me :>

an object has a kinetic energy of 14 j and a mass of 17 kg how fast is the object moving

Answers

KE=14JMass=m=17kgVelocity=v=?

[tex]\\ \sf\Rrightarrow kE=\dfrac{1}{2}mv^2[/tex]

[tex]\\ \sf\Rrightarrow 14=\dfrac{1}{2}17v^2[/tex]

[tex]\\ \sf\Rrightarrow 17v^2=28[/tex]

[tex]\\ \sf\Rrightarrow v^2=28/17[/tex]

[tex]\\ \sf\Rrightarrow v^2=1.64[/tex]

[tex]\\ \sf\Rrightarrow v\approx 0.13m/s[/tex]

How much force is necessary to stretch a spring 0.5 m when the spring constant is 190 N/m?

Answers

Answer:

95 N

Explanation:

Question 5. One 1,5V battery runs a portable MP3 player that draws 5,7mA of current
for about six hours before it runs out.
a) What is the resistance If the portable MP3 player?
b) How much power is dissipated in the portable MP3 player?
c) Find the energy delivered by the portable MP3 player?

Answers

First, convert the values of the units to S.I units (otherwise the final answer may be wrong):

P.D = 1.5 volts
Current = 5.7 x 10^-3 amps
Time = 21600 seconds


a) To find resistance, you can use the equation V=IR and rearrange it to find the resistance.

Resistance = p.d / current
Resistance = 1.5 / 5.7x10^-3

Resistance = 263.2 ohms (rounded to 1dp)


b) To find power, you can use the following equations to calculate power:
P=VI
P=I^2 R
P = V^2 / R
P = E/T

You can use any of the equations and still get the right answer, however it's best to use the equations which have the values that you already know from the questions.

I used P=VI:

Power = p.d x current
Power = 1.5 x (5.7x^-3)

Power = 8.55 x 10^-3


c) To find energy, you can use the equation E=PT.

Energy = power x time

(Using the value of power from the previous question)

Energy = (8.55x10^-3) x 21600

Energy = 184.68 joules

Hope this helps :)

In a game of pool, a cue ball rolls without slipping toward the stationary eight ball with a momentum of 0.23 kg. After the two balls collide, the final momentum of the cue ball is 0.01 kg. what is the magnitude of the final momentum of the eight ball

Answers

This question involves the concepts of the law of conservation of momentum.

The magnitude of the final momentum of the eight ball is "0.22 N.s".

According to the law of conservation of momentum:

[tex]P_{i1}+P_{i2}=P_{f1}+P_{f2}[/tex]

where,

[tex]P_{i1}[/tex] = initial momentum of the cue ball = 0.23 N.s

[tex]P_{i2}[/tex] = initial momentum of the eight ball = 0 N.s (since ball is initially at rest)

[tex]P_{f1}[/tex] = final momentum of the cue ball = 0.01 N.s

[tex]P_{f2}[/tex] = final momentum of the eight ball = ?

Therefore,

[tex]0.23\ N.s + 0\N.s = 0.01\ N.s+P_{f2}\\\\P_{f2} = 0.22\ N.s[/tex]

Learn more about the law of conservation of momentum here:

brainly.com/question/1113396?referrer=searchResults

What would be the difference in your welght if you were four times farther from the center of Earth than you are now?

Answers

you would die.

the core of the earth is as hot as the sun surface so you would be dead

1.Explain why you think it is important to vary your
physical activities from time to time.

2. Define: Lifelong activities and Lifetime sports.
Include similarities, differences and give
examples.

Answers

Answer:

I feel like a person should vary their physical activities because it keeps your body in shape and fit and you are able to move around. For example, like running or jogging it helps burn calories and it helps keep your abs/stomach right.

Explanation:

A 2.6 kg mass attached to a light string rotates on a horizontal,
frictionless table. The radius of the circle is 0.525 m, and the
string can support a mass of 17.9 kg before breaking. The
acceleration of gravity is 9.8m/s2. What maximum speed can
the mass have before the string breaks?

Answers

The maximum speed the mass can have before it breaks is 2.27 m/s.

The given parameters:

maximum mass the string can support before breaking, m = 17.9 kgradius of the circle, r = 0.525 m

The maximum speed the mass can have before it breaks is calculated as follows;

[tex]T = ma_c\\\\Mg = \frac{Mv^2}{r} \\\\v^2 = rg\\\\v = \sqrt{rg} \\\\v_{max} = \sqrt{0.525 \times 9.8} \\\\v_{max} = 2.27 \ m/s[/tex]

Thus, the maximum speed the mass can have before it breaks is 2.27 m/s.

Learn more about maximum speed of horizontal circle here:https://brainly.com/question/21971127

mrs. knight drops her briefcase. when the briefcase lands on the floor, what is the reaction force to the action force of the briefcase on the floor?

Answers

Answer:

The force of the floor on the briefcase

Explanation:

The briefcase hits the floor and stops the falling which is reacting to the briefcase that was falling and hits the floor.

The falling briefcase would be the action force because it is moving downward

and

The reaction force would be the floor because it will react on the briefcase.

Hope this Helps

When the briefcase lands on the floor, the reaction force to the action force of the briefcase on the floor is  force of the floor on the briefcase.

What are action force and reaction force?

It might be difficult to distinguish between action and reaction forces. This is due to the fact that both forces are always present.

One might argue that there are an equal number of forces in the universe if one were to count them all. However, the definition of the action force is provided by the perspective of the interaction analysis in order to help the argument.

A force that is applied to an object is known as an action force.

An action force with an opposite direction has an effect called a reaction force.

These two forces—also referred to as action and reaction forces—are covered by Newton's third law of motion.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ5

Physicists call any change in energy an impulse true or false?

Answers

False
.!.7:&//‘is sis sis did is

7. A drag car takes off at the green light heading in a straight line. The car goes
from a complete stop to 45m/s in 9 seconds. What is its acceleration?

Answers

Answer:

405

Explanation:

If the car stops at 45m/s in 9 seconds then it took the car 405 meters to stop

1. A student adds water and sugar to a jar and seals the jar so that nothing can get in or out. The
student then finds the mass of the jar containing the water and sugar. After some sugar dissolves, the
student finds the mass of the jar and its contents again.
Water
Sugar
and
Water
Sugar
Sugar
Before
After
Vhat will happen to the mass of the jar containing the water and sugar after some of the sugar
issolves?
a. The mass will stay the same
b. The mass will increase
c. The mass will decrease
The moon will donend on how much sunar dissolves

Answers

Answer:

The mass will stay the same throughout time

The magnitude of acceleration due to gravity is

Select one:
a. 9.8 m/s

b. 8.9 m/s?

c. 4.6 m/s?

d. 9.8 m/s2

Answers

Answer:

The magnitude of acceleration is 9.8 m/s

Explanation:

Its not always in m/s^2 but in m/s due to the unit of distance and time

is atmosphere pressure at high altitudes is less than the pressure at ground, true or false​

Answers

Answer:

The answer is true I guess!!!

This is because the more you go up to less air it is and the pressure also gets less!!!!!!!!

Explanation:

I HOPE THAT I WAS HELPFUL TO YOU!

on which principle does a thermometer is based​

Answers

Answer:

thermal expansion

hope it helps

How would you explain conduction?

Answers

Answer:

the meaning of conduction is the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.

Explanation:

Answer:

the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.

Explanation:

please help quick i’ll mark you brainly

The equation below shows how to calculate work done by an applied force. W equals the work done in joules (J), F equals the applied force in newtons (N), and d equals the distance in meters (m) over which the force is applied.

W = F × d

This equation can be arranged to calculate the applied force instead:
F = W ÷ d

A scientist was performing some experiments to test the designs of some simple machines. One of her experiments involved a pulley. During the experiment, a total of 2,000 J of work was done to lift a crate 5 m straight up off the floor.

Ignoring the effects of friction, determine the applied force needed to lift the crate.
A.
2,005 N
B.
400 N
C.
10,000 N
D.
1,995 N

Answers

Answer:

The solutions to this exercise is B. 400N

The distance between adjacent nodes in a standing wave pattern is 25.0 cm. What is the
wavelength? If the frequency is 200. Hz, what is the speed of the wave?

Answers

Answer:

Answer:

Speed of the wave in the string will be 3.2 m/sec

Explanation:

We have given frequency in the string fixed at both ends is 80 Hz

Distance between adjacent antipodes is 20 cm

We know that distance between two adjacent anti nodes is equal to half of the wavelength

So \frac{\lambda }{2}=20cm

2

λ

=20cm

\lambda =40cmλ=40cm

We have to find the speed of the wave in the string

Speed is equal to v=\lambda f=0.04\times 80=3.2m/secv=λf=0.04×80=3.2m/sec

So speed of the wave in the string will be 3.2 m/sec

Read this statement: Biotechnology uses primary clarifiers for biological nutrient removal.

Which part of the statement is not true?

Biological nutrients are found in wastewater.
Primary clarifiers remove biological nutrients.
Biological nutrients are part of biotechnology processes.
Biological nutrient removal is part of wastewater management.

Answers

Primary clarifiers removing biological nutrients is not true. Primary clarifiers

involves the use of processes such as sedimentation in order to remove

particles floating or other inorganic solids from the waste water.

Biological nutrients such as nitrogen and  phosphorus are found in waste

water and removal of these important nutrients for other uses is a part of

waste water management.

The secondary clarifiers are the ones responsible for the removal of

biological nutrients in the waste water through biofiltration etc.

Read more on https://brainly.com/question/25085634

a car collides with a wall. compare the forces exerted by the car on the wall and the wall on the car​

Answers

Answer:

Newton’s third law states that for every action there is an equal and opposite reaction. Based on this you can say that the car crashing into the wall would put force into the wall. However, because the wall didn’t move it gives an equal force back to the car, probably causing it to crumple.

Explanation:

Mass multiplied by acceleration produces force.

The acceleration is (v - 0)/t in this situation, where t seems to be the time it takes automobile A to come to a stop. According to Newton's third law of motion, the automobile produces this turning force of the wall, however the wall, which really is static and indestructible, forces an equal force back on the car.

According to Newton's third law, each action has an equal and opposite response. On this basis, you may deduce that a car driving into a wall would exert force on the wall. However, since the wall did not move, the automobile receives an equivalent force, causing it to collapse.

Learn more:

https://brainly.com/question/13952508?referrer=searchResults

Other Questions
Click to fix any plural or possessive errors below. If there is no error, just click"Submit Answer."Tip: The name of this place is "the Caribbean Sea."Every weekend, Jack Johnson explores one of theCaribbean Sea little islands.ResetSubmit answerI don't knowReport a problem The purest source of energy is PLEASE HELP!!!!! thx :)Jorge makes a cylindrical birthday cake as shown in the figure. He slices it verticallyinto two equal pieces, cutting directly through the center of the cake.Which statement best describes the resulting cross section? can someone help me please! How many ml of a 2.903 M NaOH solution are needed to produce 500.0 ml of a 0.3344M solution? please explain your answer How do you work x+1-2=4 and x-1=2 What is precipitation ???? Is grass a living thing What is American Imperialism and why did it happen ? Spanish 2 Reflexive Verb Test. Will mark Brainliest if answers are correct. Questions are in the image below. y+5/y+6=5/4 can you pleas solve this step by step it is really hard Presented below are selected transactions for Werley Company for 2021. Jan. 1 Received $9,000 scrap value on retirement of machinery that was purchased on January 1, 2011. The machine cost $90,000 on that date, and had a useful life of 10 years with no salvage value. April 30 Sold equipment for $34,000 that was purchased on January 1, 2018. The equipment cost $90,000, and had a useful life of 5 years with no salvage value. Dec. 31 Discarded a business truck that was purchased on April 1, 2017. The truck cost $27,000 and was depreciated on a 5-year useful life with a salvage value of $2,000. Journalize all entries required as a result of the above transactions. Werley Company uses the straight-line method of depreciation and has recorded depreciation through December 31, 2020. (Credit account titles are automatically indented when the amount is entered. Do not indent manually. Record journal entries in the order presented in the problem. If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts.) Date Account Titles and Explanation Debit Credit choose a transaction date Jan. 1 enter an account title to record depreciation expense enter a debit amount enter a credit amount enter an account title to record depreciation expense enter a debit amount enter a credit amount enter an account title to record depreciation expense enter a debit amount enter a credit amount enter an account title to record depreciation expense enter a debit amount enter a credit amount choose a transaction date April 30 enter an account title to record depreciation expense enter a debit amount enter a credit amount enter an account title to record depreciation expense enter a debit amount enter a credit amount (To record depreciation expense) choose a transaction date April 30 enter an account title to record sale of equipment Cash enter a debit amount 34000 enter a credit amount enter an account title to record sale of equipment Accumulated Depreciation-Equipment enter a debit amount What the number ??? Help Please convert 360minutes to hour PLEASE HELPP TIMED!!!Carbon dioxide is a toxic gas if it builds up in the body. Which best describes how a mask treats carbon dioxide toprevent this build-up?O The partial-rebreather and non-rebreather masks allow carbon dioxide to escape from the sides of the mask, andthe simple face mask combines the oxygen gas and exhaled air.The partial rebreather mask allows carbon dioxide to escape from the sides of the mask, and the simple facemask and non-rebreather masks combine the oxygen gas and exhaled air.The simple face mask allows carbon dioxide to escape from the sides of the mask, and the partial-rebreather andnon-rebreather masks combine the oxygen gas and exhaled air.O The simple face mask and non-rebreather mask allow carbon dioxide to escape from the sides of the mask, andthe partial-rebreather mask combines the oxygen gas and exhaled air. Please solve this . 20 points to anyone willing to help Abdul works as a regulator at the Bureau of Consumer Protection. His agency makes sure that consumers are treated fairly. What task might be part of Abdul's job at his agency?Question 6 options:drawing up ideas for the new city parkdrafting a proposal for the state government budgetrecording information about a fraudulent businessmeeting with heads of state to discuss trade Describe the rock layers shown in Diagram A and any forces acting on the rock. which statement best describes why genetic variation is beneficial to populations of organisms A. Individuals look different from one another. B . Only one parent is needed to produce offspring. C. Populations of the organism increases more rapidly. D. Species can better survive environmental changes.